URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [orpsoc_top/] [orpsoc_top.v] - Rev 415
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// /// //// /// ORPSoC top level //// /// //// /// Define I/O ports, instantiate modules //// /// //// /// Julius Baxter, julius@opencores.org //// /// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009, 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `include "orpsoc-defines.v" module orpsoc_top ( `ifdef JTAG_DEBUG tdo_pad_o, tms_pad_i, tck_pad_i, tdi_pad_i, `endif `ifdef UART0 uart0_srx_pad_i, uart0_stx_pad_o, `endif clk_pad_i, rst_n_pad_i ); `include "orpsoc-params.v" input clk_pad_i; input rst_n_pad_i; `ifdef JTAG_DEBUG output tdo_pad_o; input tms_pad_i; input tck_pad_i; input tdi_pad_i; `endif `ifdef UART0 input uart0_srx_pad_i; output uart0_stx_pad_o; `endif //////////////////////////////////////////////////////////////////////// // // Clock and reset generation module // //////////////////////////////////////////////////////////////////////// // // Wires // wire async_rst; wire wb_clk, wb_rst; wire dbg_tck; clkgen clkgen0 ( .clk_pad_i (clk_pad_i), .async_rst_o (async_rst), .wb_clk_o (wb_clk), .wb_rst_o (wb_rst), `ifdef JTAG_DEBUG .tck_pad_i (tck_pad_i), .dbg_tck_o (dbg_tck), `endif // Asynchronous active low reset .rst_n_pad_i (rst_n_pad_i) ); //////////////////////////////////////////////////////////////////////// // // Arbiter // //////////////////////////////////////////////////////////////////////// // Wire naming convention: // First: wishbone master or slave (wbm/wbs) // Second: Which bus it's on instruction or data (i/d) // Third: Between which module and the arbiter the wires are // Fourth: Signal name // Fifth: Direction relative to module (not bus/arbiter!) // ie. wbm_d_or12_adr_o is address OUT from the or1200 // OR1200 instruction bus wires wire [wb_aw-1:0] wbm_i_or12_adr_o; wire [wb_dw-1:0] wbm_i_or12_dat_o; wire [3:0] wbm_i_or12_sel_o; wire wbm_i_or12_we_o; wire wbm_i_or12_cyc_o; wire wbm_i_or12_stb_o; wire [2:0] wbm_i_or12_cti_o; wire [1:0] wbm_i_or12_bte_o; wire [wb_dw-1:0] wbm_i_or12_dat_i; wire wbm_i_or12_ack_i; wire wbm_i_or12_err_i; wire wbm_i_or12_rty_i; // OR1200 data bus wires wire [wb_aw-1:0] wbm_d_or12_adr_o; wire [wb_dw-1:0] wbm_d_or12_dat_o; wire [3:0] wbm_d_or12_sel_o; wire wbm_d_or12_we_o; wire wbm_d_or12_cyc_o; wire wbm_d_or12_stb_o; wire [2:0] wbm_d_or12_cti_o; wire [1:0] wbm_d_or12_bte_o; wire [wb_dw-1:0] wbm_d_or12_dat_i; wire wbm_d_or12_ack_i; wire wbm_d_or12_err_i; wire wbm_d_or12_rty_i; // Debug interface bus wires wire [wb_aw-1:0] wbm_d_dbg_adr_o; wire [wb_dw-1:0] wbm_d_dbg_dat_o; wire [3:0] wbm_d_dbg_sel_o; wire wbm_d_dbg_we_o; wire wbm_d_dbg_cyc_o; wire wbm_d_dbg_stb_o; wire [2:0] wbm_d_dbg_cti_o; wire [1:0] wbm_d_dbg_bte_o; wire [wb_dw-1:0] wbm_d_dbg_dat_i; wire wbm_d_dbg_ack_i; wire wbm_d_dbg_err_i; wire wbm_d_dbg_rty_i; // Byte bus bridge master signals wire [wb_aw-1:0] wbm_b_d_adr_o; wire [wb_dw-1:0] wbm_b_d_dat_o; wire [3:0] wbm_b_d_sel_o; wire wbm_b_d_we_o; wire wbm_b_d_cyc_o; wire wbm_b_d_stb_o; wire [2:0] wbm_b_d_cti_o; wire [1:0] wbm_b_d_bte_o; wire [wb_dw-1:0] wbm_b_d_dat_i; wire wbm_b_d_ack_i; wire wbm_b_d_err_i; wire wbm_b_d_rty_i; // Instruction bus slave wires // // rom0 instruction bus wires wire [31:0] wbs_i_rom0_adr_i; wire [wbs_i_rom0_data_width-1:0] wbs_i_rom0_dat_i; wire [3:0] wbs_i_rom0_sel_i; wire wbs_i_rom0_we_i; wire wbs_i_rom0_cyc_i; wire wbs_i_rom0_stb_i; wire [2:0] wbs_i_rom0_cti_i; wire [1:0] wbs_i_rom0_bte_i; wire [wbs_i_rom0_data_width-1:0] wbs_i_rom0_dat_o; wire wbs_i_rom0_ack_o; wire wbs_i_rom0_err_o; wire wbs_i_rom0_rty_o; // mc0 instruction bus wires wire [31:0] wbs_i_mc0_adr_i; wire [31:0] wbs_i_mc0_dat_i; wire [3:0] wbs_i_mc0_sel_i; wire wbs_i_mc0_we_i; wire wbs_i_mc0_cyc_i; wire wbs_i_mc0_stb_i; wire [2:0] wbs_i_mc0_cti_i; wire [1:0] wbs_i_mc0_bte_i; wire [31:0] wbs_i_mc0_dat_o; wire wbs_i_mc0_ack_o; wire wbs_i_mc0_err_o; wire wbs_i_mc0_rty_o; // Data bus slave wires // // mc0 data bus wires wire [31:0] wbs_d_mc0_adr_i; wire [31:0] wbs_d_mc0_dat_i; wire [3:0] wbs_d_mc0_sel_i; wire wbs_d_mc0_we_i; wire wbs_d_mc0_cyc_i; wire wbs_d_mc0_stb_i; wire [2:0] wbs_d_mc0_cti_i; wire [1:0] wbs_d_mc0_bte_i; wire [31:0] wbs_d_mc0_dat_o; wire wbs_d_mc0_ack_o; wire wbs_d_mc0_err_o; wire wbs_d_mc0_rty_o; // uart0 wires wire [31:0] wbs_d_uart0_adr_i; wire [wbs_d_uart0_data_width-1:0] wbs_d_uart0_dat_i; wire [3:0] wbs_d_uart0_sel_i; wire wbs_d_uart0_we_i; wire wbs_d_uart0_cyc_i; wire wbs_d_uart0_stb_i; wire [2:0] wbs_d_uart0_cti_i; wire [1:0] wbs_d_uart0_bte_i; wire [wbs_d_uart0_data_width-1:0] wbs_d_uart0_dat_o; wire wbs_d_uart0_ack_o; wire wbs_d_uart0_err_o; wire wbs_d_uart0_rty_o; // // Wishbone instruction bus arbiter // arbiter_ibus arbiter_ibus0 ( // Instruction Bus Master // Inputs to arbiter from master .wbm_adr_o (wbm_i_or12_adr_o), .wbm_dat_o (wbm_i_or12_dat_o), .wbm_sel_o (wbm_i_or12_sel_o), .wbm_we_o (wbm_i_or12_we_o), .wbm_cyc_o (wbm_i_or12_cyc_o), .wbm_stb_o (wbm_i_or12_stb_o), .wbm_cti_o (wbm_i_or12_cti_o), .wbm_bte_o (wbm_i_or12_bte_o), // Outputs to master from arbiter .wbm_dat_i (wbm_i_or12_dat_i), .wbm_ack_i (wbm_i_or12_ack_i), .wbm_err_i (wbm_i_or12_err_i), .wbm_rty_i (wbm_i_or12_rty_i), // Slave 0 // Inputs to slave from arbiter .wbs0_adr_i (wbs_i_rom0_adr_i), .wbs0_dat_i (wbs_i_rom0_dat_i), .wbs0_sel_i (wbs_i_rom0_sel_i), .wbs0_we_i (wbs_i_rom0_we_i), .wbs0_cyc_i (wbs_i_rom0_cyc_i), .wbs0_stb_i (wbs_i_rom0_stb_i), .wbs0_cti_i (wbs_i_rom0_cti_i), .wbs0_bte_i (wbs_i_rom0_bte_i), // Outputs from slave to arbiter .wbs0_dat_o (wbs_i_rom0_dat_o), .wbs0_ack_o (wbs_i_rom0_ack_o), .wbs0_err_o (wbs_i_rom0_err_o), .wbs0_rty_o (wbs_i_rom0_rty_o), // Slave 1 // Inputs to slave from arbiter .wbs1_adr_i (wbs_i_mc0_adr_i), .wbs1_dat_i (wbs_i_mc0_dat_i), .wbs1_sel_i (wbs_i_mc0_sel_i), .wbs1_we_i (wbs_i_mc0_we_i), .wbs1_cyc_i (wbs_i_mc0_cyc_i), .wbs1_stb_i (wbs_i_mc0_stb_i), .wbs1_cti_i (wbs_i_mc0_cti_i), .wbs1_bte_i (wbs_i_mc0_bte_i), // Outputs from slave to arbiter .wbs1_dat_o (wbs_i_mc0_dat_o), .wbs1_ack_o (wbs_i_mc0_ack_o), .wbs1_err_o (wbs_i_mc0_err_o), .wbs1_rty_o (wbs_i_mc0_rty_o), // Clock, reset inputs .wb_clk (wb_clk), .wb_rst (wb_rst)); defparam arbiter_ibus0.wb_addr_match_width = ibus_arb_addr_match_width; defparam arbiter_ibus0.slave0_adr = ibus_arb_slave0_adr; // ROM defparam arbiter_ibus0.slave1_adr = ibus_arb_slave1_adr; // Main memory // // Wishbone data bus arbiter // arbiter_dbus arbiter_dbus0 ( // Master 0 // Inputs to arbiter from master .wbm0_adr_o (wbm_d_or12_adr_o), .wbm0_dat_o (wbm_d_or12_dat_o), .wbm0_sel_o (wbm_d_or12_sel_o), .wbm0_we_o (wbm_d_or12_we_o), .wbm0_cyc_o (wbm_d_or12_cyc_o), .wbm0_stb_o (wbm_d_or12_stb_o), .wbm0_cti_o (wbm_d_or12_cti_o), .wbm0_bte_o (wbm_d_or12_bte_o), // Outputs to master from arbiter .wbm0_dat_i (wbm_d_or12_dat_i), .wbm0_ack_i (wbm_d_or12_ack_i), .wbm0_err_i (wbm_d_or12_err_i), .wbm0_rty_i (wbm_d_or12_rty_i), // Master 0 // Inputs to arbiter from master .wbm1_adr_o (wbm_d_dbg_adr_o), .wbm1_dat_o (wbm_d_dbg_dat_o), .wbm1_we_o (wbm_d_dbg_we_o), .wbm1_cyc_o (wbm_d_dbg_cyc_o), .wbm1_sel_o (wbm_d_dbg_sel_o), .wbm1_stb_o (wbm_d_dbg_stb_o), .wbm1_cti_o (wbm_d_dbg_cti_o), .wbm1_bte_o (wbm_d_dbg_bte_o), // Outputs to master from arbiter .wbm1_dat_i (wbm_d_dbg_dat_i), .wbm1_ack_i (wbm_d_dbg_ack_i), .wbm1_err_i (wbm_d_dbg_err_i), .wbm1_rty_i (wbm_d_dbg_rty_i), // Slaves .wbs0_adr_i (wbs_d_mc0_adr_i), .wbs0_dat_i (wbs_d_mc0_dat_i), .wbs0_sel_i (wbs_d_mc0_sel_i), .wbs0_we_i (wbs_d_mc0_we_i), .wbs0_cyc_i (wbs_d_mc0_cyc_i), .wbs0_stb_i (wbs_d_mc0_stb_i), .wbs0_cti_i (wbs_d_mc0_cti_i), .wbs0_bte_i (wbs_d_mc0_bte_i), .wbs0_dat_o (wbs_d_mc0_dat_o), .wbs0_ack_o (wbs_d_mc0_ack_o), .wbs0_err_o (wbs_d_mc0_err_o), .wbs0_rty_o (wbs_d_mc0_rty_o), .wbs1_adr_i (wbm_b_d_adr_o), .wbs1_dat_i (wbm_b_d_dat_o), .wbs1_sel_i (wbm_b_d_sel_o), .wbs1_we_i (wbm_b_d_we_o), .wbs1_cyc_i (wbm_b_d_cyc_o), .wbs1_stb_i (wbm_b_d_stb_o), .wbs1_cti_i (wbm_b_d_cti_o), .wbs1_bte_i (wbm_b_d_bte_o), .wbs1_dat_o (wbm_b_d_dat_i), .wbs1_ack_o (wbm_b_d_ack_i), .wbs1_err_o (wbm_b_d_err_i), .wbs1_rty_o (wbm_b_d_rty_i), // Clock, reset inputs .wb_clk (wb_clk), .wb_rst (wb_rst)); // These settings are from top level params file defparam arbiter_dbus0.wb_addr_match_width = dbus_arb_wb_addr_match_width; defparam arbiter_dbus0.wb_num_slaves = dbus_arb_wb_num_slaves; defparam arbiter_dbus0.slave0_adr = dbus_arb_slave0_adr; defparam arbiter_dbus0.slave1_adr = dbus_arb_slave1_adr; // // Wishbone byte-wide bus arbiter // arbiter_bytebus arbiter_bytebus0 ( // Master 0 // Inputs to arbiter from master .wbm0_adr_o (wbm_b_d_adr_o), .wbm0_dat_o (wbm_b_d_dat_o), .wbm0_sel_o (wbm_b_d_sel_o), .wbm0_we_o (wbm_b_d_we_o), .wbm0_cyc_o (wbm_b_d_cyc_o), .wbm0_stb_o (wbm_b_d_stb_o), .wbm0_cti_o (wbm_b_d_cti_o), .wbm0_bte_o (wbm_b_d_bte_o), // Outputs to master from arbiter .wbm0_dat_i (wbm_b_d_dat_i), .wbm0_ack_i (wbm_b_d_ack_i), .wbm0_err_i (wbm_b_d_err_i), .wbm0_rty_i (wbm_b_d_rty_i), // Byte bus slaves .wbs0_adr_i (wbs_d_uart0_adr_i), .wbs0_dat_i (wbs_d_uart0_dat_i), .wbs0_we_i (wbs_d_uart0_we_i), .wbs0_cyc_i (wbs_d_uart0_cyc_i), .wbs0_stb_i (wbs_d_uart0_stb_i), .wbs0_cti_i (wbs_d_uart0_cti_i), .wbs0_bte_i (wbs_d_uart0_bte_i), .wbs0_dat_o (wbs_d_uart0_dat_o), .wbs0_ack_o (wbs_d_uart0_ack_o), .wbs0_err_o (wbs_d_uart0_err_o), .wbs0_rty_o (wbs_d_uart0_rty_o), // Clock, reset inputs .wb_clk (wb_clk), .wb_rst (wb_rst)); defparam arbiter_bytebus0.wb_addr_match_width = bbus_arb_wb_addr_match_width; defparam arbiter_bytebus0.wb_num_slaves = bbus_arb_wb_num_slaves; defparam arbiter_bytebus0.slave0_adr = bbus_arb_slave0_adr; defparam arbiter_bytebus0.slave1_adr = bbus_arb_slave1_adr; `ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // JTAG TAP // //////////////////////////////////////////////////////////////////////// // // Wires // wire dbg_if_select; wire dbg_if_tdo; wire jtag_tap_tdo; wire jtag_tap_shift_dr, jtag_tap_pause_dr, jtag_tap_update_dr, jtag_tap_capture_dr; // // Instantiation // jtag_tap jtag_tap0 ( // Ports to pads .tdo_pad_o (tdo_pad_o), .tms_pad_i (tms_pad_i), .tck_pad_i (dbg_tck), .trst_pad_i (async_rst), .tdi_pad_i (tdi_pad_i), .tdo_padoe_o (), .tdo_o (jtag_tap_tdo), .shift_dr_o (jtag_tap_shift_dr), .pause_dr_o (jtag_tap_pause_dr), .update_dr_o (jtag_tap_update_dr), .capture_dr_o (jtag_tap_capture_dr), .extest_select_o (), .sample_preload_select_o (), .mbist_select_o (), .debug_select_o (dbg_if_select), .bs_chain_tdi_i (1'b0), .mbist_tdi_i (1'b0), .debug_tdi_i (dbg_if_tdo) ); //////////////////////////////////////////////////////////////////////// `endif // `ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // OpenRISC processor // //////////////////////////////////////////////////////////////////////// // // Wires // wire [19:0] or1200_pic_ints; wire [31:0] or1200_dbg_dat_i; wire [31:0] or1200_dbg_adr_i; wire or1200_dbg_we_i; wire or1200_dbg_stb_i; wire or1200_dbg_ack_o; wire [31:0] or1200_dbg_dat_o; wire or1200_dbg_stall_i; wire or1200_dbg_ewt_i; wire [3:0] or1200_dbg_lss_o; wire [1:0] or1200_dbg_is_o; wire [10:0] or1200_dbg_wp_o; wire or1200_dbg_bp_o; wire or1200_dbg_rst; wire or1200_clk, or1200_rst; wire sig_tick; // // Assigns // assign or1200_clk = wb_clk; assign or1200_rst = wb_rst | or1200_dbg_rst; // // Instantiation // or1200_top or1200_top0 ( // Instruction bus, clocks, reset .iwb_clk_i (wb_clk), .iwb_rst_i (wb_rst), .iwb_ack_i (wbm_i_or12_ack_i), .iwb_err_i (wbm_i_or12_err_i), .iwb_rty_i (wbm_i_or12_rty_i), .iwb_dat_i (wbm_i_or12_dat_i), .iwb_cyc_o (wbm_i_or12_cyc_o), .iwb_adr_o (wbm_i_or12_adr_o), .iwb_stb_o (wbm_i_or12_stb_o), .iwb_we_o (wbm_i_or12_we_o), .iwb_sel_o (wbm_i_or12_sel_o), .iwb_dat_o (wbm_i_or12_dat_o), .iwb_cti_o (wbm_i_or12_cti_o), .iwb_bte_o (wbm_i_or12_bte_o), // Data bus, clocks, reset .dwb_clk_i (wb_clk), .dwb_rst_i (wb_rst), .dwb_ack_i (wbm_d_or12_ack_i), .dwb_err_i (wbm_d_or12_err_i), .dwb_rty_i (wbm_d_or12_rty_i), .dwb_dat_i (wbm_d_or12_dat_i), .dwb_cyc_o (wbm_d_or12_cyc_o), .dwb_adr_o (wbm_d_or12_adr_o), .dwb_stb_o (wbm_d_or12_stb_o), .dwb_we_o (wbm_d_or12_we_o), .dwb_sel_o (wbm_d_or12_sel_o), .dwb_dat_o (wbm_d_or12_dat_o), .dwb_cti_o (wbm_d_or12_cti_o), .dwb_bte_o (wbm_d_or12_bte_o), // Debug interface ports .dbg_stall_i (or1200_dbg_stall_i), //.dbg_ewt_i (or1200_dbg_ewt_i), .dbg_ewt_i (1'b0), .dbg_lss_o (or1200_dbg_lss_o), .dbg_is_o (or1200_dbg_is_o), .dbg_wp_o (or1200_dbg_wp_o), .dbg_bp_o (or1200_dbg_bp_o), .dbg_adr_i (or1200_dbg_adr_i), .dbg_we_i (or1200_dbg_we_i ), .dbg_stb_i (or1200_dbg_stb_i), .dbg_dat_i (or1200_dbg_dat_i), .dbg_dat_o (or1200_dbg_dat_o), .dbg_ack_o (or1200_dbg_ack_o), .pm_clksd_o (), .pm_dc_gate_o (), .pm_ic_gate_o (), .pm_dmmu_gate_o (), .pm_immu_gate_o (), .pm_tt_gate_o (), .pm_cpu_gate_o (), .pm_wakeup_o (), .pm_lvolt_o (), // Core clocks, resets .clk_i (or1200_clk), .rst_i (or1200_rst), .clmode_i (2'b00), // Interrupts .pic_ints_i (or1200_pic_ints), .sig_tick(sig_tick), /* .mbist_so_o (), .mbist_si_i (0), .mbist_ctrl_i (0), */ .pm_cpustall_i (1'b0) ); //////////////////////////////////////////////////////////////////////// `ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // OR1200 Debug Interface // //////////////////////////////////////////////////////////////////////// dbg_if dbg_if0 ( // OR1200 interface .cpu0_clk_i (or1200_clk), .cpu0_rst_o (or1200_dbg_rst), .cpu0_addr_o (or1200_dbg_adr_i), .cpu0_data_o (or1200_dbg_dat_i), .cpu0_stb_o (or1200_dbg_stb_i), .cpu0_we_o (or1200_dbg_we_i), .cpu0_data_i (or1200_dbg_dat_o), .cpu0_ack_i (or1200_dbg_ack_o), .cpu0_stall_o (or1200_dbg_stall_i), .cpu0_bp_i (or1200_dbg_bp_o), // TAP interface .tck_i (dbg_tck), .tdi_i (jtag_tap_tdo), .tdo_o (dbg_if_tdo), .rst_i (wb_rst), .shift_dr_i (jtag_tap_shift_dr), .pause_dr_i (jtag_tap_pause_dr), .update_dr_i (jtag_tap_update_dr), .debug_select_i (dbg_if_select), // Wishbone debug master .wb_clk_i (wb_clk), .wb_dat_i (wbm_d_dbg_dat_i), .wb_ack_i (wbm_d_dbg_ack_i), .wb_err_i (wbm_d_dbg_err_i), .wb_adr_o (wbm_d_dbg_adr_o), .wb_dat_o (wbm_d_dbg_dat_o), .wb_cyc_o (wbm_d_dbg_cyc_o), .wb_stb_o (wbm_d_dbg_stb_o), .wb_sel_o (wbm_d_dbg_sel_o), .wb_we_o (wbm_d_dbg_we_o ), .wb_cti_o (wbm_d_dbg_cti_o), .wb_cab_o (/* UNUSED */), .wb_bte_o (wbm_d_dbg_bte_o) ); //////////////////////////////////////////////////////////////////////// `else // !`ifdef JTAG_DEBUG assign wbm_d_dbg_adr_o = 0; assign wbm_d_dbg_dat_o = 0; assign wbm_d_dbg_cyc_o = 0; assign wbm_d_dbg_stb_o = 0; assign wbm_d_dbg_sel_o = 0; assign wbm_d_dbg_we_o = 0; assign wbm_d_dbg_cti_o = 0; assign wbm_d_dbg_bte_o = 0; assign or1200_dbg_adr_i = 0; assign or1200_dbg_dat_i = 0; assign or1200_dbg_stb_i = 0; assign or1200_dbg_we_i = 0; assign or1200_dbg_stall_i = 0; //////////////////////////////////////////////////////////////////////// `endif // !`ifdef JTAG_DEBUG //////////////////////////////////////////////////////////////////////// // // ROM // //////////////////////////////////////////////////////////////////////// rom rom0 ( .wb_dat_o (wbs_i_rom0_dat_o), .wb_ack_o (wbs_i_rom0_ack_o), .wb_adr_i (wbs_i_rom0_adr_i[(wbs_i_rom0_addr_width+2)-1:2]), .wb_stb_i (wbs_i_rom0_stb_i), .wb_cyc_i (wbs_i_rom0_cyc_i), .wb_cti_i (wbs_i_rom0_cti_i), .wb_bte_i (wbs_i_rom0_bte_i), .wb_clk (wb_clk), .wb_rst (wb_rst)); defparam rom0.addr_width = wbs_i_rom0_addr_width; assign wbs_i_rom0_err_o = 0; assign wbs_i_rom0_rty_o = 0; //////////////////////////////////////////////////////////////////////// `ifdef RAM_WB //////////////////////////////////////////////////////////////////////// // // Generic main RAM // //////////////////////////////////////////////////////////////////////// parameter wb_ram_dat_width = 32; parameter wb_ram_adr_width = 23; //parameter ram_wb_mem_size = 2097152; // 8MB parameter wb_ram_mem_size = 8388608; // 32MB -- for linux test // Arbiter logic for sharing the RAM between 2 masters // This should probably not be in the top-level module! // Bus to WB B3 RAM wire [wb_ram_adr_width-1:0] wb_ram_adr_i; wire [1:0] wb_ram_bte_i; wire [2:0] wb_ram_cti_i; wire wb_ram_cyc_i; wire [wb_ram_dat_width-1:0] wb_ram_dat_i; wire [3:0] wb_ram_sel_i; wire wb_ram_stb_i; wire wb_ram_we_i; wire wb_ram_ack_o; wire wb_ram_err_o; wire wb_ram_rty_o; wire [wb_ram_dat_width-1:0] wb_ram_dat_o; reg [1:0] wb_ram_mast_select; reg [1:0] wb_ram_last_selected; wire wb_ram_arb_for_dbus, wb_ram_arb_for_ibus; // Wires allowing selection of new input assign wb_ram_arb_for_dbus = (wb_ram_last_selected[1] | !wbs_i_mc0_cyc_i) & !(|wb_ram_mast_select); assign wb_ram_arb_for_ibus = (wb_ram_last_selected[0] | !wbs_d_mc0_cyc_i) & !(|wb_ram_mast_select); // Master select logic always @(posedge wb_rst or posedge wb_clk) if (wb_rst) wb_ram_mast_select <= 0; else if ((wb_ram_mast_select[0] & !wbs_d_mc0_cyc_i) | (wb_ram_mast_select[1] & !wbs_i_mc0_cyc_i)) wb_ram_mast_select <= 0; else if (!(&wb_ram_mast_select) & wbs_d_mc0_cyc_i & wb_ram_arb_for_dbus) wb_ram_mast_select <= 2'b01; else if (!(&wb_ram_mast_select) & wbs_i_mc0_cyc_i & wb_ram_arb_for_ibus) wb_ram_mast_select <= 2'b10; always @(posedge wb_rst or posedge wb_clk) if (wb_rst) wb_ram_last_selected <= 0; else if (!(&wb_ram_mast_select) & wbs_d_mc0_cyc_i & wb_ram_arb_for_dbus) wb_ram_last_selected <= 2'b01; else if (!(&wb_ram_mast_select) & wbs_i_mc0_cyc_i & wb_ram_arb_for_ibus) wb_ram_last_selected <= 2'b10; // Mux input signals to RAM (default to wbs_d_mc0) assign wb_ram_adr_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_adr_i[wb_ram_adr_width-1:0] : (wb_ram_mast_select[0]) ? wbs_d_mc0_adr_i[wb_ram_adr_width-1:0] : 0; assign wb_ram_bte_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_bte_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_bte_i : 0; assign wb_ram_cti_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_cti_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_cti_i : 0; assign wb_ram_cyc_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_cyc_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_cyc_i : 0; assign wb_ram_dat_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_dat_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_dat_i : 0; assign wb_ram_sel_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_sel_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_sel_i : 0; assign wb_ram_stb_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_stb_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_stb_i : 0; assign wb_ram_we_i = (wb_ram_mast_select[1]) ? wbs_i_mc0_we_i : (wb_ram_mast_select[0]) ? wbs_d_mc0_we_i : 0; // Output from RAM, gate the ACK, ERR, RTY signals appropriately assign wbs_d_mc0_dat_o = wb_ram_dat_o; assign wbs_d_mc0_ack_o = wb_ram_ack_o & wb_ram_mast_select[0]; assign wbs_d_mc0_err_o = wb_ram_err_o & wb_ram_mast_select[0]; assign wbs_d_mc0_rty_o = wb_ram_rty_o & wb_ram_mast_select[0]; assign wbs_i_mc0_dat_o = wb_ram_dat_o; assign wbs_i_mc0_ack_o = wb_ram_ack_o & wb_ram_mast_select[1]; assign wbs_i_mc0_err_o = wb_ram_err_o & wb_ram_mast_select[1]; assign wbs_i_mc0_rty_o = wb_ram_rty_o & wb_ram_mast_select[1]; // Wishbone B3 RAM wb_ram_b3 #( .dw(wb_ram_dat_width), .aw(wb_ram_adr_width), .mem_size(wb_ram_mem_size) ) wb_ram_b3_0 ( // Outputs .wb_ack_o (wb_ram_ack_o), .wb_err_o (wb_ram_err_o), .wb_rty_o (wb_ram_rty_o), .wb_dat_o (wb_ram_dat_o), // Inputs .wb_adr_i (wb_ram_adr_i), .wb_bte_i (wb_ram_bte_i), .wb_cti_i (wb_ram_cti_i), .wb_cyc_i (wb_ram_cyc_i), .wb_dat_i (wb_ram_dat_i), .wb_sel_i (wb_ram_sel_i), .wb_stb_i (wb_ram_stb_i), .wb_we_i (wb_ram_we_i), .wb_clk_i (wb_clk), .wb_rst_i (wb_rst)); //////////////////////////////////////////////////////////////////////// `endif `ifdef UART0 //////////////////////////////////////////////////////////////////////// // // UART0 // //////////////////////////////////////////////////////////////////////// // // Wires // wire uart0_irq; // // Assigns // assign wbs_d_uart0_err_o = 0; assign wbs_d_uart0_rty_o = 0; uart16550 uart16550_0 ( // Wishbone slave interface .wb_clk_i (wb_clk), .wb_rst_i (wb_rst), .wb_adr_i (wbs_d_uart0_adr_i[uart0_addr_width-1:0]), .wb_dat_i (wbs_d_uart0_dat_i), .wb_we_i (wbs_d_uart0_we_i), .wb_stb_i (wbs_d_uart0_stb_i), .wb_cyc_i (wbs_d_uart0_cyc_i), //.wb_sel_i (), .wb_dat_o (wbs_d_uart0_dat_o), .wb_ack_o (wbs_d_uart0_ack_o), .int_o (uart0_irq), .stx_pad_o (uart0_stx_pad_o), .rts_pad_o (), .dtr_pad_o (), // .baud_o (), // Inputs .srx_pad_i (uart0_srx_pad_i), .cts_pad_i (1'b0), .dsr_pad_i (1'b0), .ri_pad_i (1'b0), .dcd_pad_i (1'b0)); //////////////////////////////////////////////////////////////////////// `else // !`ifdef UART0 // // Assigns // assign wbs_d_uart0_err_o = 0; assign wbs_d_uart0_rty_o = 0; assign wbs_d_uart0_ack_o = 0; assign wbs_d_uart0_dat_o = 0; //////////////////////////////////////////////////////////////////////// `endif // !`ifdef UART0 //////////////////////////////////////////////////////////////////////// // // OR1200 Interrupt assignment // //////////////////////////////////////////////////////////////////////// assign or1200_pic_ints[0] = 0; // Non-maskable inside OR1200 assign or1200_pic_ints[1] = 0; // Non-maskable inside OR1200 `ifdef UART0 assign or1200_pic_ints[2] = uart0_irq; `else assign or1200_pic_ints[2] = 0; `endif assign or1200_pic_ints[3] = 0; assign or1200_pic_ints[4] = 0; assign or1200_pic_ints[5] = 0; `ifdef SPI0 assign or1200_pic_ints[6] = spi0_irq; `else assign or1200_pic_ints[6] = 0; `endif assign or1200_pic_ints[7] = 0; assign or1200_pic_ints[8] = 0; assign or1200_pic_ints[9] = 0; assign or1200_pic_ints[10] = 0; assign or1200_pic_ints[11] = 0; assign or1200_pic_ints[12] = 0; assign or1200_pic_ints[13] = 0; assign or1200_pic_ints[14] = 0; assign or1200_pic_ints[15] = 0; assign or1200_pic_ints[16] = 0; assign or1200_pic_ints[17] = 0; assign or1200_pic_ints[18] = 0; assign or1200_pic_ints[19] = 0; endmodule // top // Local Variables: // verilog-library-directories:("." "../arbiter" "../uart16550" "../or1200" "../dbg_if" "../jtag_tap" "../rom" "../simple_spi" ) // verilog-library-files:() // verilog-library-extensions:(".v" ".h") // End:
Go to most recent revision | Compare with Previous | Blame | View Log