Subversion Repositories openrisc

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  uart_top.v                                                  ////
////                                                              ////
////                                                              ////
////  This file is part of the "UART 16550 compatible" project    ////
////  http://www.opencores.org/cores/uart16550/                   ////
////                                                              ////
////  Documentation related to this project:                      ////
////  - http://www.opencores.org/cores/uart16550/                 ////
////                                                              ////
////  Projects compatibility:                                     ////
////  - WISHBONE                                                  ////
////  RS232 Protocol                                              ////
////  16550D uart (mostly supported)                              ////
////                                                              ////
////  Overview (main Features):                                   ////
////  UART core top level.                                        ////
////                                                              ////
////  Known problems (limits):                                    ////
////  Note that transmitter and receiver instances are inside     ////
////  the uart_regs.v file.                                       ////
////                                                              ////
////  To Do:                                                      ////
////  Nothing so far.                                             ////
////                                                              ////
////  Author(s):                                                  ////
////      - gorban@opencores.org                                  ////
////      - Jacob Gorban                                          ////
////      - Igor Mohor (igorm@opencores.org)                      ////
////                                                              ////
////  Created:        2001/05/12                                  ////
////  Last Updated:   2001/05/17                                  ////
////                  (See log for the revision history)          ////
////                                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000, 2001 Authors                             ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.18  2002/07/22 23:02:23  gorban
// Bug Fixes:
//  * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
//   Problem reported by Kenny.Tung.
//  * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
//
// Improvements:
//  * Made FIFO's as general inferrable memory where possible.
//  So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
//  This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
//
//  * Added optional baudrate output (baud_o).
//  This is identical to BAUDOUT* signal on 16550 chip.
//  It outputs 16xbit_clock_rate - the divided clock.
//  It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
//
// Revision 1.17  2001/12/19 08:40:03  mohor
// Warnings fixed (unused signals removed).
//
// Revision 1.16  2001/12/06 14:51:04  gorban
// Bug in LSR[0] is fixed.
// All WISHBONE signals are now sampled, so another wait-state is introduced on all transfers.
//
// Revision 1.15  2001/12/03 21:44:29  gorban
// Updated specification documentation.
// Added full 32-bit data bus interface, now as default.
// Address is 5-bit wide in 32-bit data bus mode.
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
// My small test bench is modified to work with 32-bit mode.
//
// Revision 1.14  2001/11/07 17:51:52  gorban
// Heavily rewritten interrupt and LSR subsystems.
// Many bugs hopefully squashed.
//
// Revision 1.13  2001/10/20 09:58:40  gorban
// Small synopsis fixes
//
// Revision 1.12  2001/08/25 15:46:19  gorban
// Modified port names again
//
// Revision 1.11  2001/08/24 21:01:12  mohor
// Things connected to parity changed.
// Clock devider changed.
//
// Revision 1.10  2001/08/23 16:05:05  mohor
// Stop bit bug fixed.
// Parity bug fixed.
// WISHBONE read cycle bug fixed,
// OE indicator (Overrun Error) bug fixed.
// PE indicator (Parity Error) bug fixed.
// Register read bug fixed.
//
// Revision 1.4  2001/05/31 20:08:01  gorban
// FIFO changes and other corrections.
//
// Revision 1.3  2001/05/21 19:12:02  gorban
// Corrected some Linter messages.
//
// Revision 1.2  2001/05/17 18:34:18  gorban
// First 'stable' release. Should be sythesizable now. Also added new header.
//
// Revision 1.0  2001-05-17 21:27:12+02  jacob
// Initial revision
//
//
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
 
`include "uart_defines.v"
 
//module uart_top	(
module uart16550( // renamed by Julius
		  wb_clk_i, 
 
		  // Wishbone signals
		  wb_rst_i, wb_adr_i, wb_dat_i, wb_we_i, wb_dat_o, 
`ifndef DATA_BUS_WIDTH_8
		  wb_sel_i,
`endif		  
		  wb_stb_i, wb_cyc_i, wb_ack_o, 
		  int_o, // interrupt request
 
		  // UART	signals
		  // serial input/output
		  stx_pad_o, srx_pad_i,
 
		  // modem signals
		  rts_pad_o, cts_pad_i, dtr_pad_o, dsr_pad_i, ri_pad_i, 
		  dcd_pad_i
`ifdef UART_HAS_BAUDRATE_OUTPUT
		  , baud_o
`endif
		  );
 
   parameter uart_data_width = `UART_DATA_WIDTH;
   parameter uart_addr_width = `UART_ADDR_WIDTH;
 
   input  wb_clk_i;
 
   // WISHBONE interface
   input  wb_rst_i;
   input [uart_addr_width-1:0] wb_adr_i;
   input [uart_data_width-1:0] wb_dat_i;
   output [uart_data_width-1:0] wb_dat_o;
   input 			wb_we_i;
   input 			wb_stb_i;
   input 			wb_cyc_i;
`ifndef DATA_BUS_WIDTH_8   
   input [3:0] 			wb_sel_i;
`endif   
   output 			wb_ack_o;
   output 			int_o;
 
   // UART	signals
   input 			srx_pad_i;
   output 			stx_pad_o;
   output 			rts_pad_o;
   input 			cts_pad_i;
   output 			dtr_pad_o;
   input 			dsr_pad_i;
   input 			ri_pad_i;
   input 			dcd_pad_i;
 
   // optional baudrate output
`ifdef UART_HAS_BAUDRATE_OUTPUT
   output 			baud_o;
`endif
 
 
   wire 			stx_pad_o;
   wire 			rts_pad_o;
   wire 			dtr_pad_o;
 
   wire [uart_addr_width-1:0] 	wb_adr_i;
   wire [uart_data_width-1:0] 	wb_dat_i;
   wire [uart_data_width-1:0] 	wb_dat_o;
 
   wire [7:0] 			wb_dat8_i; // 8-bit internal data input
   wire [7:0] 			wb_dat8_o; // 8-bit internal data output
   wire [31:0] 			wb_dat32_o; // debug interface 32-bit output
   wire [3:0] 			wb_sel_i;  // WISHBONE select signal
   wire [uart_addr_width-1:0] 	wb_adr_int;
   wire 			we_o;	// Write enable for registers
   wire 			re_o;	// Read enable for registers
   //
   // MODULE INSTANCES
   //
 
`ifdef DATA_BUS_WIDTH_8
`else
   // debug interface wires
   wire [3:0] 			ier;
   wire [3:0] 			iir;
   wire [1:0] 			fcr;
   wire [4:0] 			mcr;
   wire [7:0] 			lcr;
   wire [7:0] 			msr;
   wire [7:0] 			lsr;
   wire [`UART_FIFO_COUNTER_W-1:0] rf_count;
   wire [`UART_FIFO_COUNTER_W-1:0] tf_count;
   wire [2:0] 			   tstate;
   wire [3:0] 			   rstate; 
`endif
 
`ifdef DATA_BUS_WIDTH_8
   ////  WISHBONE interface module
   uart_wb wb_interface
     (
      .clk(		wb_clk_i		),
      .wb_rst_i(	wb_rst_i	),
      .wb_dat_i(wb_dat_i),
      .wb_dat_o(wb_dat_o),
      .wb_dat8_i(wb_dat8_i),
      .wb_dat8_o(wb_dat8_o),
      .wb_dat32_o(32'b0),								 
      .wb_sel_i(4'b0),
      .wb_we_i(	wb_we_i		),
      .wb_stb_i(	wb_stb_i	),
      .wb_cyc_i(	wb_cyc_i	),
      .wb_ack_o(	wb_ack_o	),
      .wb_adr_i(wb_adr_i),
      .wb_adr_int(wb_adr_int),
      .we_o(		we_o		),
      .re_o(re_o)
      );
`else
   uart_wb wb_interface
     (
      .clk(		wb_clk_i		),
      .wb_rst_i(	wb_rst_i	),
      .wb_dat_i(wb_dat_i),
      .wb_dat_o(wb_dat_o),
      .wb_dat8_i(wb_dat8_i),
      .wb_dat8_o(wb_dat8_o),
      .wb_sel_i(wb_sel_i),
      .wb_dat32_o(wb_dat32_o),								 
      .wb_we_i(	wb_we_i		),
      .wb_stb_i(	wb_stb_i	),
      .wb_cyc_i(	wb_cyc_i	),
      .wb_ack_o(	wb_ack_o	),
      .wb_adr_i(wb_adr_i),
      .wb_adr_int(wb_adr_int),
      .we_o(		we_o		),
      .re_o(re_o)
      );
`endif
 
   // Registers
   uart_regs regs
     (
      .clk(		wb_clk_i		),
      .wb_rst_i(	wb_rst_i	),
      .wb_addr_i(	wb_adr_int	),
      .wb_dat_i(	wb_dat8_i	),
      .wb_dat_o(	wb_dat8_o	),
      .wb_we_i(	we_o		),
      .wb_re_i(re_o),
      .modem_inputs(	{cts_pad_i, dsr_pad_i,
			 ri_pad_i,  dcd_pad_i}	),
      .stx_pad_o(		stx_pad_o		),
      .srx_pad_i(		srx_pad_i		),
`ifdef DATA_BUS_WIDTH_8
`else
      // debug interface signals	enabled
      .ier(ier), 
      .iir(iir), 
      .fcr(fcr), 
      .mcr(mcr), 
      .lcr(lcr), 
      .msr(msr), 
      .lsr(lsr), 
      .rf_count(rf_count),
      .tf_count(tf_count),
      .tstate(tstate),
      .rstate(rstate),
`endif					  
      .rts_pad_o(		rts_pad_o		),
      .dtr_pad_o(		dtr_pad_o		),
      .int_o(		int_o		)
`ifdef UART_HAS_BAUDRATE_OUTPUT
      , .baud_o(baud_o)
`endif
 
      );
 
`ifdef DATA_BUS_WIDTH_8
`else
   uart_debug_if dbg
     (
      // Outputs
      .wb_dat32_o				 (wb_dat32_o[31:0]),
      // Inputs
      .wb_adr_i				 (wb_adr_int[`UART_ADDR_WIDTH-1:0]),
      .ier						 (ier[3:0]),
      .iir						 (iir[3:0]),
      .fcr						 (fcr[1:0]),
      .mcr						 (mcr[4:0]),
      .lcr						 (lcr[7:0]),
      .msr						 (msr[7:0]),
      .lsr						 (lsr[7:0]),
      .rf_count				 (rf_count[`UART_FIFO_COUNTER_W-1:0]),
      .tf_count				 (tf_count[`UART_FIFO_COUNTER_W-1:0]),
      .tstate					 (tstate[2:0]),
      .rstate					 (rstate[3:0]));
`endif 
 
/*
   initial
     begin
`ifdef DATA_BUS_WIDTH_8
	$display("(%m) UART INFO: Data bus width is 8. No Debug interface.\n");
`else
	$display("(%m) UART INFO: Data bus width is 32. Debug Interface present.\n");
`endif
`ifdef UART_HAS_BAUDRATE_OUTPUT
	$display("(%m) UART INFO: Has baudrate output\n");
`else
	$display("(%m) UART INFO: Doesn't have baudrate output\n");
`endif
     end
*/
endmodule