OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [uart16550/] [uart_receiver.v] - Rev 363

Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  uart_receiver.v                                             ////
////                                                              ////
////                                                              ////
////  This file is part of the "UART 16550 compatible" project    ////
////  http://www.opencores.org/cores/uart16550/                   ////
////                                                              ////
////  Documentation related to this project:                      ////
////  - http://www.opencores.org/cores/uart16550/                 ////
////                                                              ////
////  Projects compatibility:                                     ////
////  - WISHBONE                                                  ////
////  RS232 Protocol                                              ////
////  16550D uart (mostly supported)                              ////
////                                                              ////
////  Overview (main Features):                                   ////
////  UART core receiver logic                                    ////
////                                                              ////
////  Known problems (limits):                                    ////
////  None known                                                  ////
////                                                              ////
////  To Do:                                                      ////
////  Thourough testing.                                          ////
////                                                              ////
////  Author(s):                                                  ////
////      - gorban@opencores.org                                  ////
////      - Jacob Gorban                                          ////
////      - Igor Mohor (igorm@opencores.org)                      ////
////                                                              ////
////  Created:        2001/05/12                                  ////
////  Last Updated:   2001/05/17                                  ////
////                  (See log for the revision history)          ////
////                                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000, 2001 Authors                             ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.29  2002/07/29 21:16:18  gorban
// The uart_defines.v file is included again in sources.
//
// Revision 1.28  2002/07/22 23:02:23  gorban
// Bug Fixes:
//  * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
//   Problem reported by Kenny.Tung.
//  * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
//
// Improvements:
//  * Made FIFO's as general inferrable memory where possible.
//  So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
//  This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
//
//  * Added optional baudrate output (baud_o).
//  This is identical to BAUDOUT* signal on 16550 chip.
//  It outputs 16xbit_clock_rate - the divided clock.
//  It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
//
// Revision 1.27  2001/12/30 20:39:13  mohor
// More than one character was stored in case of break. End of the break
// was not detected correctly.
//
// Revision 1.26  2001/12/20 13:28:27  mohor
// Missing declaration of rf_push_q fixed.
//
// Revision 1.25  2001/12/20 13:25:46  mohor
// rx push changed to be only one cycle wide.
//
// Revision 1.24  2001/12/19 08:03:34  mohor
// Warnings cleared.
//
// Revision 1.23  2001/12/19 07:33:54  mohor
// Synplicity was having troubles with the comment.
//
// Revision 1.22  2001/12/17 14:46:48  mohor
// overrun signal was moved to separate block because many sequential lsr
// reads were preventing data from being written to rx fifo.
// underrun signal was not used and was removed from the project.
//
// Revision 1.21  2001/12/13 10:31:16  mohor
// timeout irq must be set regardless of the rda irq (rda irq does not reset the
// timeout counter).
//
// Revision 1.20  2001/12/10 19:52:05  gorban
// Igor fixed break condition bugs
//
// Revision 1.19  2001/12/06 14:51:04  gorban
// Bug in LSR[0] is fixed.
// All WISHBONE signals are now sampled, so another wait-state is introduced on all transfers.
//
// Revision 1.18  2001/12/03 21:44:29  gorban
// Updated specification documentation.
// Added full 32-bit data bus interface, now as default.
// Address is 5-bit wide in 32-bit data bus mode.
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
// My small test bench is modified to work with 32-bit mode.
//
// Revision 1.17  2001/11/28 19:36:39  gorban
// Fixed: timeout and break didn't pay attention to current data format when counting time
//
// Revision 1.16  2001/11/27 22:17:09  gorban
// Fixed bug that prevented synthesis in uart_receiver.v
//
// Revision 1.15  2001/11/26 21:38:54  gorban
// Lots of fixes:
// Break condition wasn't handled correctly at all.
// LSR bits could lose their values.
// LSR value after reset was wrong.
// Timing of THRE interrupt signal corrected.
// LSR bit 0 timing corrected.
//
// Revision 1.14  2001/11/10 12:43:21  gorban
// Logic Synthesis bugs fixed. Some other minor changes
//
// Revision 1.13  2001/11/08 14:54:23  mohor
// Comments in Slovene language deleted, few small fixes for better work of
// old tools. IRQs need to be fix.
//
// Revision 1.12  2001/11/07 17:51:52  gorban
// Heavily rewritten interrupt and LSR subsystems.
// Many bugs hopefully squashed.
//
// Revision 1.11  2001/10/31 15:19:22  gorban
// Fixes to break and timeout conditions
//
// Revision 1.10  2001/10/20 09:58:40  gorban
// Small synopsis fixes
//
// Revision 1.9  2001/08/24 21:01:12  mohor
// Things connected to parity changed.
// Clock devider changed.
//
// Revision 1.8  2001/08/23 16:05:05  mohor
// Stop bit bug fixed.
// Parity bug fixed.
// WISHBONE read cycle bug fixed,
// OE indicator (Overrun Error) bug fixed.
// PE indicator (Parity Error) bug fixed.
// Register read bug fixed.
//
// Revision 1.6  2001/06/23 11:21:48  gorban
// DL made 16-bit long. Fixed transmission/reception bugs.
//
// Revision 1.5  2001/06/02 14:28:14  gorban
// Fixed receiver and transmitter. Major bug fixed.
//
// Revision 1.4  2001/05/31 20:08:01  gorban
// FIFO changes and other corrections.
//
// Revision 1.3  2001/05/27 17:37:49  gorban
// Fixed many bugs. Updated spec. Changed FIFO files structure. See CHANGES.txt file.
//
// Revision 1.2  2001/05/21 19:12:02  gorban
// Corrected some Linter messages.
//
// Revision 1.1  2001/05/17 18:34:18  gorban
// First 'stable' release. Should be sythesizable now. Also added new header.
//
// Revision 1.0  2001-05-17 21:27:11+02  jacob
// Initial revision
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
 
`include "uart_defines.v"
 
module uart_receiver (clk, wb_rst_i, lcr, rf_pop, srx_pad_i, enable, 
		      counter_t, rf_count, rf_data_out, rf_error_bit, rf_overrun, rx_reset, lsr_mask, rstate, rf_push_pulse);
 
   input				clk;
   input				wb_rst_i;
   input [7:0] 				lcr;
   input				rf_pop;
   input				srx_pad_i;
   input				enable;
   input				rx_reset;
   input 				lsr_mask;
 
   output [9:0] 			counter_t;
   output [`UART_FIFO_COUNTER_W-1:0] 	rf_count;
   output [`UART_FIFO_REC_WIDTH-1:0] 	rf_data_out;
   output				rf_overrun;
   output				rf_error_bit;
   output [3:0] 			rstate;
   output 				rf_push_pulse;
 
   reg [3:0] 				rstate;
   reg [3:0] 				rcounter16;
   reg [2:0] 				rbit_counter;
   reg [7:0] 				rshift;			// receiver shift register
   reg 					rparity;		// received parity
   reg 					rparity_error;
   reg 					rframing_error;		// framing error flag
   reg 					rbit_in;
   reg 					rparity_xor;
   reg [7:0] 				counter_b;	// counts the 0 (low) signals
   reg 					rf_push_q;
 
   // RX FIFO signals
   reg [`UART_FIFO_REC_WIDTH-1:0] 	rf_data_in;
   wire [`UART_FIFO_REC_WIDTH-1:0] 	rf_data_out;
   wire 				rf_push_pulse;
   reg 					rf_push;
   wire 				rf_pop;
   wire 				rf_overrun;
   wire [`UART_FIFO_COUNTER_W-1:0] 	rf_count;
   wire 				rf_error_bit; // an error (parity or framing) is inside the fifo
   wire 				break_error = (counter_b == 0);
 
   // RX FIFO instance
   uart_rfifo #(`UART_FIFO_REC_WIDTH) fifo_rx(
					      .clk(		clk		), 
					      .wb_rst_i(	wb_rst_i	),
					      .data_in(	rf_data_in	),
					      .data_out(	rf_data_out	),
					      .push(		rf_push_pulse		),
					      .pop(		rf_pop		),
					      .overrun(	rf_overrun	),
					      .count(		rf_count	),
					      .error_bit(	rf_error_bit	),
					      .fifo_reset(	rx_reset	),
					      .reset_status(lsr_mask)
					      );
 
   wire 				rcounter16_eq_7 = (rcounter16 == 4'd7);
   wire 				rcounter16_eq_0 = (rcounter16 == 4'd0);
   wire 				rcounter16_eq_1 = (rcounter16 == 4'd1);
 
   wire [3:0] 				rcounter16_minus_1 = rcounter16 - 3'd1;
 
   parameter  sr_idle 					= 4'd0;
   parameter  sr_rec_start 			= 4'd1;
   parameter  sr_rec_bit 				= 4'd2;
   parameter  sr_rec_parity			= 4'd3;
   parameter  sr_rec_stop 				= 4'd4;
   parameter  sr_check_parity 		= 4'd5;
   parameter  sr_rec_prepare 			= 4'd6;
   parameter  sr_end_bit				= 4'd7;
   parameter  sr_ca_lc_parity	      = 4'd8;
   parameter  sr_wait1 					= 4'd9;
   parameter  sr_push 					= 4'd10;
 
 
   always @(posedge clk or posedge wb_rst_i)
     begin
	if (wb_rst_i)
	  begin
	     rstate 			<=  sr_idle;
	     rbit_in 				<=  1'b0;
	     rcounter16 			<=  0;
	     rbit_counter 		<=  0;
	     rparity_xor 		<=  1'b0;
	     rframing_error 	<=  1'b0;
	     rparity_error 		<=  1'b0;
	     rparity 				<=  1'b0;
	     rshift 				<=  0;
	     rf_push 				<=  1'b0;
	     rf_data_in 			<=  0;
	  end
	else
	  if (enable)
	    begin
	       case (rstate)
		 sr_idle : begin
		    rf_push 			  <=  1'b0;
		    rf_data_in 	  <=  0;
		    rcounter16 	  <=  4'b1110;
		    if (srx_pad_i==1'b0 & ~break_error)   // detected a pulse (start bit?)
		      begin
			 rstate 		  <=  sr_rec_start;
		      end
		 end
		 sr_rec_start :	begin
  		    rf_push 			  <=  1'b0;
		    if (rcounter16_eq_7)    // check the pulse
		      if (srx_pad_i==1'b1)   // no start bit
			rstate <=  sr_idle;
		      else            // start bit detected
			rstate <=  sr_rec_prepare;
		    rcounter16 <=  rcounter16_minus_1;
		 end
		 sr_rec_prepare:begin
		    case (lcr[/*`UART_LC_BITS*/1:0])  // number of bits in a word
		      2'b00 : rbit_counter <=  3'b100;
		      2'b01 : rbit_counter <=  3'b101;
		      2'b10 : rbit_counter <=  3'b110;
		      2'b11 : rbit_counter <=  3'b111;
		    endcase
		    if (rcounter16_eq_0)
		      begin
			 rstate		<=  sr_rec_bit;
			 rcounter16	<=  4'b1110;
			 rshift		<=  0;
		      end
		    else
		      rstate <=  sr_rec_prepare;
		    rcounter16 <=  rcounter16_minus_1;
		 end
		 sr_rec_bit :	begin
		    if (rcounter16_eq_0)
		      rstate <=  sr_end_bit;
		    if (rcounter16_eq_7) // read the bit
		      case (lcr[/*`UART_LC_BITS*/1:0])  // number of bits in a word
			2'b00 : rshift[4:0]  <=  {srx_pad_i, rshift[4:1]};
			2'b01 : rshift[5:0]  <=  {srx_pad_i, rshift[5:1]};
			2'b10 : rshift[6:0]  <=  {srx_pad_i, rshift[6:1]};
			2'b11 : rshift[7:0]  <=  {srx_pad_i, rshift[7:1]};
		      endcase
		    rcounter16 <=  rcounter16_minus_1;
		 end
		 sr_end_bit :   begin
		    if (rbit_counter==3'b0) // no more bits in word
		      if (lcr[`UART_LC_PE]) // choose state based on parity
			rstate <=  sr_rec_parity;
		      else
			begin
			   rstate <=  sr_rec_stop;
			   rparity_error <=  1'b0;  // no parity - no error :)
			end
		    else		// else we have more bits to read
		      begin
			 rstate <=  sr_rec_bit;
			 rbit_counter <=  rbit_counter - 3'd1;
		      end
		    rcounter16 <=  4'b1110;
		 end
		 sr_rec_parity: begin
		    if (rcounter16_eq_7)	// read the parity
		      begin
			 rparity <=  srx_pad_i;
			 rstate <=  sr_ca_lc_parity;
		      end
		    rcounter16 <=  rcounter16_minus_1;
		 end
		 sr_ca_lc_parity : begin    // rcounter equals 6
		    rcounter16  <=  rcounter16_minus_1;
		    rparity_xor <=  ^{rshift,rparity}; // calculate parity on all incoming data
		    rstate      <=  sr_check_parity;
		 end
		 sr_check_parity: begin	  // rcounter equals 5
		    case ({lcr[`UART_LC_EP],lcr[`UART_LC_SP]})
		      2'b00: rparity_error <=   rparity_xor == 0;  // no error if parity 1
		      2'b01: rparity_error <=  ~rparity;      // parity should sticked to 1
		      2'b10: rparity_error <=   rparity_xor == 1;   // error if parity is odd
		      2'b11: rparity_error <=   rparity;	  // parity should be sticked to 0
		    endcase
		    rcounter16 <=  rcounter16_minus_1;
		    rstate <=  sr_wait1;
		 end
		 sr_wait1 :	if (rcounter16_eq_0)
		   begin
		      rstate <=  sr_rec_stop;
		      rcounter16 <=  4'b1110;
		   end
		 else
		   rcounter16 <=  rcounter16_minus_1;
		 sr_rec_stop :	begin
		    if (rcounter16_eq_7)	// read the parity
		      begin
			 rframing_error <=  !srx_pad_i; // no framing error if input is 1 (stop bit)
			 rstate <=  sr_push;
		      end
		    rcounter16 <=  rcounter16_minus_1;
		 end
		 sr_push :	begin
		    ///////////////////////////////////////
		    //				$display($time, ": received: %b", rf_data_in);
		    if(srx_pad_i | break_error)
		      begin
			 if(break_error)
        		   rf_data_in 	<=  {8'b0, 3'b100}; // break input (empty character) to receiver FIFO
			 else
        		   rf_data_in  <=  {rshift, 1'b0, rparity_error, rframing_error};
      			 rf_push 		  <=  1'b1;
    			 rstate        <=  sr_idle;
		      end
		    else if(~rframing_error)  // There's always a framing before break_error -> wait for break or srx_pad_i
		      begin
       			 rf_data_in  <=  {rshift, 1'b0, rparity_error, rframing_error};
      			 rf_push 		  <=  1'b1;
      			 rcounter16 	  <=  4'b1110;
    			 rstate 		  <=  sr_rec_start;
		      end
 
		 end
		 default : rstate <=  sr_idle;
	       endcase
	    end  // if (enable)
     end // always of receiver
 
   always @ (posedge clk or posedge wb_rst_i)
     begin
	if(wb_rst_i)
	  rf_push_q <= 0;
	else
	  rf_push_q <=  rf_push;
     end
 
   assign rf_push_pulse = rf_push & ~rf_push_q;
 
 
   //
   // Break condition detection.
   // Works in conjuction with the receiver state machine
 
   reg 	[9:0]	toc_value; // value to be set to timeout counter
 
   always @(lcr)
     case (lcr[3:0])
       4'b0000: toc_value = 447; // 7 bits
       4'b0100: toc_value = 479; // 7.5 bits
       4'b0001,	4'b1000	: toc_value = 511; // 8 bits
       4'b1100: toc_value = 543; // 8.5 bits
       4'b0010, 4'b0101, 4'b1001: toc_value = 575; // 9 bits
       4'b0011, 4'b0110, 4'b1010, 4'b1101: toc_value = 639; // 10 bits
       4'b0111, 4'b1011, 4'b1110: toc_value = 703; // 11 bits
       4'b1111: toc_value = 767; // 12 bits
     endcase // case(lcr[3:0])
 
   wire [7:0] 	brc_value; // value to be set to break counter
   assign 		brc_value = toc_value[9:2]; // the same as timeout but 1 insead of 4 character times
 
   always @(posedge clk or posedge wb_rst_i)
     begin
	if (wb_rst_i)
	  counter_b <=  8'd159;
	else
	  if (srx_pad_i)
	    counter_b <=  brc_value; // character time length - 1
	  else
	    if(enable & counter_b != 8'b0)            // only work on enable times  break not reached.
	      counter_b <=  counter_b - 1;  // decrement break counter
     end // always of break condition detection
 
   ///
   /// Timeout condition detection
   reg	[9:0]	counter_t;	// counts the timeout condition clocks
 
   always @(posedge clk or posedge wb_rst_i)
     begin
	if (wb_rst_i)
	  counter_t <=  10'd639; // 10 bits for the default 8N1
	else
	  if(rf_push_pulse || rf_pop || rf_count == 0) // counter is reset when RX FIFO is empty, accessed or above trigger level
	    counter_t <=  toc_value;
	  else
	    if (enable && counter_t != 10'b0)  // we don't want to underflow
	      counter_t <=  counter_t - 1;		
     end
 
endmodule
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.