OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [usbhostslave/] [SCTxPortArbiter.v] - Rev 462

Go to most recent revision | Compare with Previous | Blame | View Log

 
// File        : ../RTL/slaveController/sctxportarbiter.v
// Generated   : 11/10/06 05:37:24
// From        : ../RTL/slaveController/sctxportarbiter.asf
// By          : FSM2VHDL ver. 5.0.0.9
 
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// SCTxPortArbiter
////                                                              ////
//// This file is part of the usbhostslave opencores effort.
//// http://www.opencores.org/cores/usbhostslave/                 ////
////                                                              ////
//// Module Description:                                          ////
//// 
////                                                              ////
//// To Do:                                                       ////
//// 
////                                                              ////
//// Author(s):                                                   ////
//// - Steve Fielding, sfielding@base2designs.com                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2004 Steve Fielding and OPENCORES.ORG          ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE. See the GNU Lesser General Public License for more  ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
`include "timescale.v"
 
module SCTxPortArbiter (SCTxPortCntl, SCTxPortData, SCTxPortRdyIn, SCTxPortRdyOut, SCTxPortWEnable, clk, directCntlCntl, directCntlData, directCntlGnt, directCntlReq, directCntlWEn, rst, sendPacketCntl, sendPacketData, sendPacketGnt, sendPacketReq, sendPacketWEn);
input   SCTxPortRdyIn;
input   clk;
input   [7:0] directCntlCntl;
input   [7:0] directCntlData;
input   directCntlReq;
input   directCntlWEn;
input   rst;
input   [7:0] sendPacketCntl;
input   [7:0] sendPacketData;
input   sendPacketReq;
input   sendPacketWEn;
output  [7:0] SCTxPortCntl;
output  [7:0] SCTxPortData;
output  SCTxPortRdyOut;
output  SCTxPortWEnable;
output  directCntlGnt;
output  sendPacketGnt;
 
reg     [7:0] SCTxPortCntl, next_SCTxPortCntl;
reg     [7:0] SCTxPortData, next_SCTxPortData;
wire    SCTxPortRdyIn;
reg     SCTxPortRdyOut, next_SCTxPortRdyOut;
reg     SCTxPortWEnable, next_SCTxPortWEnable;
wire    clk;
wire    [7:0] directCntlCntl;
wire    [7:0] directCntlData;
reg     directCntlGnt, next_directCntlGnt;
wire    directCntlReq;
wire    directCntlWEn;
wire    rst;
wire    [7:0] sendPacketCntl;
wire    [7:0] sendPacketData;
reg     sendPacketGnt, next_sendPacketGnt;
wire    sendPacketReq;
wire    sendPacketWEn;
 
// diagram signals declarations
reg  muxDCEn, next_muxDCEn;
 
// BINARY ENCODED state machine: SCTxArb
// State codes definitions:
`define SARB1_WAIT_REQ 2'b00
`define SARB_SEND_PACKET 2'b01
`define SARB_DC 2'b10
`define START_SARB 2'b11
 
reg [1:0] CurrState_SCTxArb;
reg [1:0] NextState_SCTxArb;
 
// Diagram actions (continuous assignments allowed only: assign ...)
 
// SOFController/directContol/sendPacket mux
always @(SCTxPortRdyIn)
begin
    SCTxPortRdyOut <= SCTxPortRdyIn;
end
always @(muxDCEn or
		 		 directCntlWEn or directCntlData or directCntlCntl or
                  directCntlWEn or directCntlData or directCntlCntl or
 		  		 sendPacketWEn or sendPacketData or sendPacketCntl)
begin
if (muxDCEn == 1'b1)
    begin
        SCTxPortWEnable <= directCntlWEn;
        SCTxPortData <= directCntlData;
        SCTxPortCntl <= directCntlCntl;
    end
else
    begin
        SCTxPortWEnable <= sendPacketWEn;
        SCTxPortData <= sendPacketData;
        SCTxPortCntl <= sendPacketCntl;
    end
end
 
//--------------------------------------------------------------------
// Machine: SCTxArb
//--------------------------------------------------------------------
//----------------------------------
// Next State Logic (combinatorial)
//----------------------------------
always @ (sendPacketReq or directCntlReq or sendPacketGnt or muxDCEn or directCntlGnt or CurrState_SCTxArb)
begin : SCTxArb_NextState
  NextState_SCTxArb <= CurrState_SCTxArb;
  // Set default values for outputs and signals
  next_sendPacketGnt <= sendPacketGnt;
  next_muxDCEn <= muxDCEn;
  next_directCntlGnt <= directCntlGnt;
  case (CurrState_SCTxArb)
    `SARB1_WAIT_REQ:
      if (sendPacketReq == 1'b1)	
      begin
        NextState_SCTxArb <= `SARB_SEND_PACKET;
        next_sendPacketGnt <= 1'b1;
        next_muxDCEn <= 1'b0;
      end
      else if (directCntlReq == 1'b1)	
      begin
        NextState_SCTxArb <= `SARB_DC;
        next_directCntlGnt <= 1'b1;
        next_muxDCEn <= 1'b1;
      end
    `SARB_SEND_PACKET:
      if (sendPacketReq == 1'b0)	
      begin
        NextState_SCTxArb <= `SARB1_WAIT_REQ;
        next_sendPacketGnt <= 1'b0;
      end
    `SARB_DC:
      if (directCntlReq == 1'b0)	
      begin
        NextState_SCTxArb <= `SARB1_WAIT_REQ;
        next_directCntlGnt <= 1'b0;
      end
    `START_SARB:
      NextState_SCTxArb <= `SARB1_WAIT_REQ;
  endcase
end
 
//----------------------------------
// Current State Logic (sequential)
//----------------------------------
always @ (posedge clk)
begin : SCTxArb_CurrentState
  if (rst)	
    CurrState_SCTxArb <= `START_SARB;
  else
    CurrState_SCTxArb <= NextState_SCTxArb;
end
 
//----------------------------------
// Registered outputs logic
//----------------------------------
always @ (posedge clk)
begin : SCTxArb_RegOutput
  if (rst)	
  begin
    muxDCEn <= 1'b0;
    sendPacketGnt <= 1'b0;
    directCntlGnt <= 1'b0;
  end
  else 
  begin
    muxDCEn <= next_muxDCEn;
    sendPacketGnt <= next_sendPacketGnt;
    directCntlGnt <= next_directCntlGnt;
  end
end
 
endmodule

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.