URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [usbhostslave/] [SIETransmitter.v] - Rev 584
Go to most recent revision | Compare with Previous | Blame | View Log
// File : ../RTL/serialInterfaceEngine/SIETransmitter.v // Generated : 10/15/06 20:31:22 // From : ../RTL/serialInterfaceEngine/SIETransmitter.asf // By : FSM2VHDL ver. 5.0.0.9 ////////////////////////////////////////////////////////////////////// //// //// //// SIETransmitter //// //// //// This file is part of the usbhostslave opencores effort. //// http://www.opencores.org/cores/usbhostslave/ //// //// //// //// Module Description: //// //// //// //// //// To Do: //// //// //// //// //// Author(s): //// //// - Steve Fielding, sfielding@base2designs.com //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2004 Steve Fielding and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // `include "timescale.v" `include "usbhostslave_serialinterfaceengine_h.v" `include "usbhostslave_constants_h.v" module SIETransmitter (CRC16En, CRC16Result, CRC16UpdateRdy, CRC5En, CRC5Result, CRC5UpdateRdy, CRC5_8Bit, CRCData, JBit, KBit, SIEPortCtrlIn, SIEPortDataIn, SIEPortTxRdy, SIEPortWEn, TxByteOutCtrl, TxByteOutFullSpeedRate, TxByteOut, USBWireCtrl, USBWireData, USBWireFullSpeedRate, USBWireGnt, USBWireRdy, USBWireReq, USBWireWEn, clk, fullSpeedRateIn, processTxByteRdy, processTxByteWEn, rst, rstCRC); input [15:0] CRC16Result; input CRC16UpdateRdy; input [4:0] CRC5Result; input CRC5UpdateRdy; input [1:0] JBit; input [1:0] KBit; input [7:0] SIEPortCtrlIn; input [7:0] SIEPortDataIn; input SIEPortWEn; input USBWireGnt; input USBWireRdy; input clk; input fullSpeedRateIn; input processTxByteRdy; input rst; output CRC16En; output CRC5En; output CRC5_8Bit; output [7:0] CRCData; output SIEPortTxRdy; output [7:0] TxByteOutCtrl; output TxByteOutFullSpeedRate; output [7:0] TxByteOut; output USBWireCtrl; output [1:0] USBWireData; output USBWireFullSpeedRate; output USBWireReq; output USBWireWEn; output processTxByteWEn; output rstCRC; reg CRC16En, next_CRC16En; wire [15:0] CRC16Result; wire CRC16UpdateRdy; reg CRC5En, next_CRC5En; wire [4:0] CRC5Result; wire CRC5UpdateRdy; reg CRC5_8Bit, next_CRC5_8Bit; reg [7:0] CRCData, next_CRCData; wire [1:0] JBit; wire [1:0] KBit; wire [7:0] SIEPortCtrlIn; wire [7:0] SIEPortDataIn; reg SIEPortTxRdy, next_SIEPortTxRdy; wire SIEPortWEn; reg [7:0] TxByteOutCtrl, next_TxByteOutCtrl; reg TxByteOutFullSpeedRate, next_TxByteOutFullSpeedRate; reg [7:0] TxByteOut, next_TxByteOut; reg USBWireCtrl, next_USBWireCtrl; reg [1:0] USBWireData, next_USBWireData; reg USBWireFullSpeedRate, next_USBWireFullSpeedRate; wire USBWireGnt; wire USBWireRdy; reg USBWireReq, next_USBWireReq; reg USBWireWEn, next_USBWireWEn; wire clk; wire fullSpeedRateIn; wire processTxByteRdy; reg processTxByteWEn, next_processTxByteWEn; wire rst; reg rstCRC, next_rstCRC; // diagram signals declarations reg [7:0]SIEPortCtrl, next_SIEPortCtrl; reg [7:0]SIEPortData, next_SIEPortData; reg [2:0]i, next_i; reg [15:0]resumeCnt, next_resumeCnt; // BINARY ENCODED state machine: SIETx // State codes definitions: `define DIR_CTL_CHK_FIN 6'b000000 `define RES_ST_CHK_FIN 6'b000001 `define PKT_ST_CHK_PID 6'b000010 `define PKT_ST_DATA_DATA_CHK_STOP 6'b000011 `define IDLE 6'b000100 `define PKT_ST_DATA_DATA_PKT_SENT 6'b000101 `define PKT_ST_DATA_PID_PKT_SENT 6'b000110 `define PKT_ST_HS_PKT_SENT 6'b000111 `define PKT_ST_TKN_CRC_PKT_SENT 6'b001000 `define PKT_ST_TKN_PID_PKT_SENT 6'b001001 `define PKT_ST_SPCL_PKT_SENT 6'b001010 `define PKT_ST_DATA_CRC_PKT_SENT1 6'b001011 `define PKT_ST_TKN_BYTE1_PKT_SENT1 6'b001100 `define PKT_ST_DATA_CRC_PKT_SENT2 6'b001101 `define RES_ST_SND_J_1 6'b001110 `define RES_ST_SND_J_2 6'b001111 `define RES_ST_SND_SE0_1 6'b010000 `define RES_ST_SND_SE0_2 6'b010001 `define START_SIETX 6'b010010 `define STX_CHK_ST 6'b010011 `define STX_WAIT_BYTE 6'b010100 `define PKT_ST_TKN_CRC_UPD_CRC 6'b010101 `define PKT_ST_TKN_BYTE1_UPD_CRC 6'b010110 `define PKT_ST_DATA_DATA_UPD_CRC 6'b010111 `define PKT_ST_TKN_CRC_WAIT_BYTE 6'b011000 `define PKT_ST_TKN_BYTE1_WAIT_BYTE 6'b011001 `define PKT_ST_DATA_DATA_WAIT_BYTE 6'b011010 `define DIR_CTL_WAIT_GNT 6'b011011 `define RES_ST_WAIT_GNT 6'b011100 `define PKT_ST_HS_WAIT_RDY 6'b011101 `define DIR_CTL_WAIT_RDY 6'b011110 `define PKT_ST_SPCL_WAIT_RDY 6'b011111 `define PKT_ST_TKN_CRC_WAIT_RDY 6'b100000 `define PKT_ST_TKN_PID_WAIT_RDY 6'b100001 `define PKT_ST_DATA_DATA_WAIT_RDY 6'b100010 `define RES_ST_WAIT_RDY 6'b100011 `define PKT_ST_TKN_BYTE1_WAIT_RDY 6'b100100 `define PKT_ST_DATA_PID_WAIT_RDY 6'b100101 `define PKT_ST_DATA_CRC_WAIT_RDY1 6'b100110 `define PKT_ST_DATA_CRC_WAIT_RDY2 6'b100111 `define PKT_ST_WAIT_RDY_PKT 6'b101000 `define RES_ST_W_RDY1 6'b101001 `define PKT_ST_TKN_CRC_WAIT_CRC_RDY 6'b101010 `define PKT_ST_DATA_DATA_WAIT_CRC_RDY 6'b101011 `define PKT_ST_TKN_BYTE1_WAIT_CRC_RDY 6'b101100 `define TX_LS_EOP_WAIT_GNT1 6'b101101 `define TX_LS_EOP_SND_SE0_2 6'b101110 `define TX_LS_EOP_SND_SE0_1 6'b101111 `define TX_LS_EOP_W_RDY1 6'b110000 `define TX_LS_EOP_SND_J 6'b110001 `define TX_LS_EOP_W_RDY2 6'b110010 `define TX_LS_EOP_W_RDY3 6'b110011 `define RES_ST_DELAY 6'b110100 `define RES_ST_W_RDY2 6'b110101 `define RES_ST_W_RDY3 6'b110110 `define RES_ST_W_RDY4 6'b110111 `define DIR_CTL_DELAY 6'b111000 reg [5:0] CurrState_SIETx; reg [5:0] NextState_SIETx; //-------------------------------------------------------------------- // Machine: SIETx //-------------------------------------------------------------------- //---------------------------------- // Next State Logic (combinatorial) //---------------------------------- always @ (SIEPortDataIn or SIEPortCtrlIn or fullSpeedRateIn or i or SIEPortData or CRC16Result or CRC5Result or KBit or resumeCnt or JBit or SIEPortCtrl or SIEPortWEn or USBWireGnt or USBWireRdy or processTxByteRdy or CRC16UpdateRdy or CRC5UpdateRdy or processTxByteWEn or TxByteOut or TxByteOutCtrl or USBWireData or USBWireCtrl or USBWireReq or USBWireWEn or rstCRC or CRCData or CRC5En or CRC5_8Bit or CRC16En or SIEPortTxRdy or TxByteOutFullSpeedRate or USBWireFullSpeedRate or CurrState_SIETx) begin : SIETx_NextState NextState_SIETx <= CurrState_SIETx; // Set default values for outputs and signals next_processTxByteWEn <= processTxByteWEn; next_TxByteOut <= TxByteOut; next_TxByteOutCtrl <= TxByteOutCtrl; next_USBWireData <= USBWireData; next_USBWireCtrl <= USBWireCtrl; next_USBWireReq <= USBWireReq; next_USBWireWEn <= USBWireWEn; next_rstCRC <= rstCRC; next_CRCData <= CRCData; next_CRC5En <= CRC5En; next_CRC5_8Bit <= CRC5_8Bit; next_CRC16En <= CRC16En; next_SIEPortTxRdy <= SIEPortTxRdy; next_SIEPortData <= SIEPortData; next_SIEPortCtrl <= SIEPortCtrl; next_i <= i; next_resumeCnt <= resumeCnt; next_TxByteOutFullSpeedRate <= TxByteOutFullSpeedRate; next_USBWireFullSpeedRate <= USBWireFullSpeedRate; case (CurrState_SIETx) `IDLE: NextState_SIETx <= `STX_WAIT_BYTE; `START_SIETX: begin next_processTxByteWEn <= 1'b0; next_TxByteOut <= 8'h00; next_TxByteOutCtrl <= 8'h00; next_USBWireData <= 2'b00; next_USBWireCtrl <= `TRI_STATE; next_USBWireReq <= 1'b0; next_USBWireWEn <= 1'b0; next_rstCRC <= 1'b0; next_CRCData <= 8'h00; next_CRC5En <= 1'b0; next_CRC5_8Bit <= 1'b0; next_CRC16En <= 1'b0; next_SIEPortTxRdy <= 1'b0; next_SIEPortData <= 8'h00; next_SIEPortCtrl <= 8'h00; next_i <= 3'h0; next_resumeCnt <= 16'h0000; next_TxByteOutFullSpeedRate <= 1'b0; next_USBWireFullSpeedRate <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; end `STX_CHK_ST: if ((SIEPortCtrl == `TX_PACKET_START) && (SIEPortData[3:0] == `SOF || SIEPortData[3:0] == `PREAMBLE)) begin NextState_SIETx <= `PKT_ST_WAIT_RDY_PKT; next_TxByteOutFullSpeedRate <= 1'b1; //SOF and PRE always at full speed end else if (SIEPortCtrl == `TX_PACKET_START) NextState_SIETx <= `PKT_ST_WAIT_RDY_PKT; else if (SIEPortCtrl == `TX_LS_KEEP_ALIVE) begin NextState_SIETx <= `TX_LS_EOP_WAIT_GNT1; next_USBWireReq <= 1'b1; end else if (SIEPortCtrl == `TX_DIRECT_CONTROL) begin NextState_SIETx <= `DIR_CTL_WAIT_GNT; next_USBWireReq <= 1'b1; end else if (SIEPortCtrl == `TX_IDLE) NextState_SIETx <= `IDLE; else if (SIEPortCtrl == `TX_RESUME_START) begin NextState_SIETx <= `RES_ST_WAIT_GNT; next_USBWireReq <= 1'b1; next_resumeCnt <= 16'h0000; next_USBWireFullSpeedRate <= 1'b0; //resume always uses low speed timing end `STX_WAIT_BYTE: begin next_SIEPortTxRdy <= 1'b1; if (SIEPortWEn == 1'b1) begin NextState_SIETx <= `STX_CHK_ST; next_SIEPortData <= SIEPortDataIn; next_SIEPortCtrl <= SIEPortCtrlIn; next_SIEPortTxRdy <= 1'b0; next_TxByteOutFullSpeedRate <= fullSpeedRateIn; next_USBWireFullSpeedRate <= fullSpeedRateIn; end end `DIR_CTL_CHK_FIN: begin next_USBWireWEn <= 1'b0; next_i <= i + 1'b1; if (i == 3'h7) begin NextState_SIETx <= `STX_WAIT_BYTE; next_USBWireReq <= 1'b0; end else NextState_SIETx <= `DIR_CTL_DELAY; end `DIR_CTL_WAIT_GNT: begin next_i <= 3'h0; if (USBWireGnt == 1'b1) NextState_SIETx <= `DIR_CTL_WAIT_RDY; end `DIR_CTL_WAIT_RDY: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `DIR_CTL_CHK_FIN; next_USBWireData <= SIEPortData[1:0]; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end `DIR_CTL_DELAY: NextState_SIETx <= `DIR_CTL_WAIT_RDY; `PKT_ST_CHK_PID: begin next_processTxByteWEn <= 1'b0; if (SIEPortData[1:0] == `TOKEN) NextState_SIETx <= `PKT_ST_TKN_PID_WAIT_RDY; else if (SIEPortData[1:0] == `HANDSHAKE) NextState_SIETx <= `PKT_ST_HS_WAIT_RDY; else if (SIEPortData[1:0] == `DATA) NextState_SIETx <= `PKT_ST_DATA_PID_WAIT_RDY; else if (SIEPortData[1:0] == `SPECIAL) NextState_SIETx <= `PKT_ST_SPCL_WAIT_RDY; end `PKT_ST_WAIT_RDY_PKT: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_CHK_PID; next_processTxByteWEn <= 1'b1; next_TxByteOut <= `SYNC_BYTE; next_TxByteOutCtrl <= `DATA_START; end `PKT_ST_DATA_CRC_PKT_SENT1: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `PKT_ST_DATA_CRC_WAIT_RDY2; end `PKT_ST_DATA_CRC_PKT_SENT2: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; end `PKT_ST_DATA_CRC_WAIT_RDY1: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_DATA_CRC_PKT_SENT1; next_processTxByteWEn <= 1'b1; next_TxByteOut <= ~CRC16Result[7:0]; next_TxByteOutCtrl <= `DATA_STREAM; end `PKT_ST_DATA_CRC_WAIT_RDY2: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_DATA_CRC_PKT_SENT2; next_processTxByteWEn <= 1'b1; next_TxByteOut <= ~CRC16Result[15:8]; next_TxByteOutCtrl <= `DATA_STOP; end `PKT_ST_DATA_DATA_CHK_STOP: if (SIEPortCtrl == `TX_PACKET_STOP) NextState_SIETx <= `PKT_ST_DATA_CRC_WAIT_RDY1; else NextState_SIETx <= `PKT_ST_DATA_DATA_WAIT_CRC_RDY; `PKT_ST_DATA_DATA_PKT_SENT: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `PKT_ST_DATA_DATA_WAIT_BYTE; end `PKT_ST_DATA_DATA_UPD_CRC: begin next_CRCData <= SIEPortData; next_CRC16En <= 1'b1; NextState_SIETx <= `PKT_ST_DATA_DATA_WAIT_RDY; end `PKT_ST_DATA_DATA_WAIT_BYTE: begin next_SIEPortTxRdy <= 1'b1; if (SIEPortWEn == 1'b1) begin NextState_SIETx <= `PKT_ST_DATA_DATA_CHK_STOP; next_SIEPortData <= SIEPortDataIn; next_SIEPortCtrl <= SIEPortCtrlIn; next_SIEPortTxRdy <= 1'b0; end end `PKT_ST_DATA_DATA_WAIT_RDY: begin next_CRC16En <= 1'b0; if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_DATA_DATA_PKT_SENT; next_processTxByteWEn <= 1'b1; next_TxByteOut <= SIEPortData; next_TxByteOutCtrl <= `DATA_STREAM; end end `PKT_ST_DATA_DATA_WAIT_CRC_RDY: if (CRC16UpdateRdy == 1'b1) NextState_SIETx <= `PKT_ST_DATA_DATA_UPD_CRC; `PKT_ST_DATA_PID_PKT_SENT: begin next_processTxByteWEn <= 1'b0; next_rstCRC <= 1'b0; NextState_SIETx <= `PKT_ST_DATA_DATA_WAIT_BYTE; end `PKT_ST_DATA_PID_WAIT_RDY: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_DATA_PID_PKT_SENT; next_processTxByteWEn <= 1'b1; next_TxByteOut <= SIEPortData; next_TxByteOutCtrl <= `DATA_STREAM; next_rstCRC <= 1'b1; end `PKT_ST_HS_PKT_SENT: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; end `PKT_ST_HS_WAIT_RDY: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_HS_PKT_SENT; next_processTxByteWEn <= 1'b1; next_TxByteOut <= SIEPortData; next_TxByteOutCtrl <= `DATA_STOP; end `PKT_ST_SPCL_PKT_SENT: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; end `PKT_ST_SPCL_WAIT_RDY: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_SPCL_PKT_SENT; next_processTxByteWEn <= 1'b1; next_TxByteOut <= SIEPortData; next_TxByteOutCtrl <= `DATA_STOP; end `PKT_ST_TKN_BYTE1_PKT_SENT1: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `PKT_ST_TKN_CRC_WAIT_BYTE; end `PKT_ST_TKN_BYTE1_UPD_CRC: begin next_CRCData <= SIEPortData; next_CRC5_8Bit <= 1'b1; next_CRC5En <= 1'b1; NextState_SIETx <= `PKT_ST_TKN_BYTE1_WAIT_RDY; end `PKT_ST_TKN_BYTE1_WAIT_BYTE: begin next_SIEPortTxRdy <= 1'b1; if (SIEPortWEn == 1'b1) begin NextState_SIETx <= `PKT_ST_TKN_BYTE1_WAIT_CRC_RDY; next_SIEPortData <= SIEPortDataIn; next_SIEPortCtrl <= SIEPortCtrlIn; next_SIEPortTxRdy <= 1'b0; end end `PKT_ST_TKN_BYTE1_WAIT_RDY: begin next_CRC5En <= 1'b0; if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_TKN_BYTE1_PKT_SENT1; next_processTxByteWEn <= 1'b1; next_TxByteOut <= SIEPortData; next_TxByteOutCtrl <= `DATA_STREAM; end end `PKT_ST_TKN_BYTE1_WAIT_CRC_RDY: if (CRC5UpdateRdy == 1'b1) NextState_SIETx <= `PKT_ST_TKN_BYTE1_UPD_CRC; `PKT_ST_TKN_CRC_PKT_SENT: begin next_processTxByteWEn <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; end `PKT_ST_TKN_CRC_UPD_CRC: begin next_CRCData <= SIEPortData; next_CRC5_8Bit <= 1'b0; next_CRC5En <= 1'b1; NextState_SIETx <= `PKT_ST_TKN_CRC_WAIT_RDY; end `PKT_ST_TKN_CRC_WAIT_BYTE: begin next_SIEPortTxRdy <= 1'b1; if (SIEPortWEn == 1'b1) begin NextState_SIETx <= `PKT_ST_TKN_CRC_WAIT_CRC_RDY; next_SIEPortData <= SIEPortDataIn; next_SIEPortCtrl <= SIEPortCtrlIn; next_SIEPortTxRdy <= 1'b0; end end `PKT_ST_TKN_CRC_WAIT_RDY: begin next_CRC5En <= 1'b0; if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_TKN_CRC_PKT_SENT; next_processTxByteWEn <= 1'b1; next_TxByteOut <= {~CRC5Result, SIEPortData[2:0] }; next_TxByteOutCtrl <= `DATA_STOP; end end `PKT_ST_TKN_CRC_WAIT_CRC_RDY: if (CRC5UpdateRdy == 1'b1) NextState_SIETx <= `PKT_ST_TKN_CRC_UPD_CRC; `PKT_ST_TKN_PID_PKT_SENT: begin next_processTxByteWEn <= 1'b0; next_rstCRC <= 1'b0; NextState_SIETx <= `PKT_ST_TKN_BYTE1_WAIT_BYTE; end `PKT_ST_TKN_PID_WAIT_RDY: if (processTxByteRdy == 1'b1) begin NextState_SIETx <= `PKT_ST_TKN_PID_PKT_SENT; next_processTxByteWEn <= 1'b1; next_TxByteOut <= SIEPortData; next_TxByteOutCtrl <= `DATA_STREAM; next_rstCRC <= 1'b1; end `RES_ST_CHK_FIN: begin next_USBWireWEn <= 1'b0; if (resumeCnt == `HOST_TX_RESUME_TIME) NextState_SIETx <= `RES_ST_W_RDY1; else NextState_SIETx <= `RES_ST_DELAY; end `RES_ST_SND_J_1: begin next_USBWireWEn <= 1'b0; NextState_SIETx <= `RES_ST_W_RDY4; end `RES_ST_SND_J_2: begin next_USBWireWEn <= 1'b0; next_USBWireReq <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; next_USBWireFullSpeedRate <= fullSpeedRateIn; end `RES_ST_SND_SE0_1: begin next_USBWireWEn <= 1'b0; NextState_SIETx <= `RES_ST_W_RDY2; end `RES_ST_SND_SE0_2: begin next_USBWireWEn <= 1'b0; NextState_SIETx <= `RES_ST_W_RDY3; end `RES_ST_WAIT_GNT: if (USBWireGnt == 1'b1) NextState_SIETx <= `RES_ST_WAIT_RDY; `RES_ST_WAIT_RDY: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `RES_ST_CHK_FIN; next_USBWireData <= KBit; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; next_resumeCnt <= resumeCnt + 1'b1; end `RES_ST_W_RDY1: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `RES_ST_SND_SE0_1; next_USBWireData <= `SE0; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end `RES_ST_DELAY: NextState_SIETx <= `RES_ST_WAIT_RDY; `RES_ST_W_RDY2: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `RES_ST_SND_SE0_2; next_USBWireData <= `SE0; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end `RES_ST_W_RDY3: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `RES_ST_SND_J_1; next_USBWireData <= JBit; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end `RES_ST_W_RDY4: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `RES_ST_SND_J_2; next_USBWireData <= JBit; next_USBWireCtrl <= `TRI_STATE; next_USBWireWEn <= 1'b1; end `TX_LS_EOP_WAIT_GNT1: if (USBWireGnt == 1'b1) NextState_SIETx <= `TX_LS_EOP_W_RDY1; `TX_LS_EOP_SND_SE0_2: begin next_USBWireWEn <= 1'b0; NextState_SIETx <= `TX_LS_EOP_W_RDY3; end `TX_LS_EOP_SND_SE0_1: begin next_USBWireWEn <= 1'b0; NextState_SIETx <= `TX_LS_EOP_W_RDY2; end `TX_LS_EOP_W_RDY1: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `TX_LS_EOP_SND_SE0_1; next_USBWireData <= `SE0; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end `TX_LS_EOP_SND_J: begin next_USBWireWEn <= 1'b0; next_USBWireReq <= 1'b0; NextState_SIETx <= `STX_WAIT_BYTE; end `TX_LS_EOP_W_RDY2: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `TX_LS_EOP_SND_SE0_2; next_USBWireData <= `SE0; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end `TX_LS_EOP_W_RDY3: if (USBWireRdy == 1'b1) begin NextState_SIETx <= `TX_LS_EOP_SND_J; next_USBWireData <= JBit; next_USBWireCtrl <= `DRIVE; next_USBWireWEn <= 1'b1; end endcase end //---------------------------------- // Current State Logic (sequential) //---------------------------------- always @ (posedge clk) begin : SIETx_CurrentState if (rst) CurrState_SIETx <= `START_SIETX; else CurrState_SIETx <= NextState_SIETx; end //---------------------------------- // Registered outputs logic //---------------------------------- always @ (posedge clk) begin : SIETx_RegOutput if (rst) begin SIEPortData <= 8'h00; SIEPortCtrl <= 8'h00; i <= 3'h0; resumeCnt <= 16'h0000; processTxByteWEn <= 1'b0; TxByteOut <= 8'h00; TxByteOutCtrl <= 8'h00; USBWireData <= 2'b00; USBWireCtrl <= `TRI_STATE; USBWireReq <= 1'b0; USBWireWEn <= 1'b0; rstCRC <= 1'b0; CRCData <= 8'h00; CRC5En <= 1'b0; CRC5_8Bit <= 1'b0; CRC16En <= 1'b0; SIEPortTxRdy <= 1'b0; TxByteOutFullSpeedRate <= 1'b0; USBWireFullSpeedRate <= 1'b0; end else begin SIEPortData <= next_SIEPortData; SIEPortCtrl <= next_SIEPortCtrl; i <= next_i; resumeCnt <= next_resumeCnt; processTxByteWEn <= next_processTxByteWEn; TxByteOut <= next_TxByteOut; TxByteOutCtrl <= next_TxByteOutCtrl; USBWireData <= next_USBWireData; USBWireCtrl <= next_USBWireCtrl; USBWireReq <= next_USBWireReq; USBWireWEn <= next_USBWireWEn; rstCRC <= next_rstCRC; CRCData <= next_CRCData; CRC5En <= next_CRC5En; CRC5_8Bit <= next_CRC5_8Bit; CRC16En <= next_CRC16En; SIEPortTxRdy <= next_SIEPortTxRdy; TxByteOutFullSpeedRate <= next_TxByteOutFullSpeedRate; USBWireFullSpeedRate <= next_USBWireFullSpeedRate; end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log