Subversion Repositories openrisc

//////////////////////////////////////////////////////////////////////
////                                                              ////
//// writeUSBWireData.v                                           ////
////                                                              ////
//// This file is part of the usbhostslave opencores effort.
//// <http://www.opencores.org/cores//>                           ////
////                                                              ////
//// Module Description:                                          ////
//// 
////                                                              ////
//// To Do:                                                       ////
//// 
////                                                              ////
//// Author(s):                                                   ////
//// - Steve Fielding, sfielding@base2designs.com                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2004 Steve Fielding and OPENCORES.ORG          ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE. See the GNU Lesser General Public License for more  ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from <http://www.opencores.org/lgpl.shtml>                   ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
`include "timescale.v"
`include "usbhostslave_serialinterfaceengine_h.v"
 
`define BUFFER_FULL  3'b100
 
module writeUSBWireData (
  TxBitsIn, 
  TxBitsOut,
   TxDataOutTick,
  TxCtrlIn, 
  TxCtrlOut, 
  USBWireRdy,
  USBWireWEn, 
  TxWireActiveDrive, 
  fullSpeedRate, 
  clk, 
  rst
   );
 
input   [1:0] TxBitsIn;
input   TxCtrlIn;
input   USBWireWEn;
input   clk;
input   fullSpeedRate;
input   rst;
output  [1:0] TxBitsOut;
output TxDataOutTick;
output  TxCtrlOut;
output  USBWireRdy;
output  TxWireActiveDrive;
 
wire    [1:0] TxBitsIn;
reg     [1:0] TxBitsOut;
reg     TxDataOutTick;
wire    TxCtrlIn;
reg     TxCtrlOut;
reg     USBWireRdy;
wire    USBWireWEn;
wire    clk;
wire    fullSpeedRate;
wire    rst;
reg     TxWireActiveDrive;
 
// local registers
reg  [2:0]buffer0;
reg  [2:0]buffer1;
reg  [2:0]buffer2;
reg  [2:0]buffer3;
reg  [2:0]bufferCnt;
reg  [1:0]bufferInIndex;
reg  [1:0]bufferOutIndex;
reg decBufferCnt;
reg  [4:0]i;
reg incBufferCnt;
reg fullSpeedTick;
reg lowSpeedTick;
 
// buffer in state machine state codes:
`define WAIT_BUFFER_NOT_FULL 2'b00
`define WAIT_WRITE_REQ 2'b01
`define CLR_INC_BUFFER_CNT 2'b10
 
// buffer output state machine state codes:
`define WAIT_BUFFER_FULL 2'b00
`define WAIT_LINE_WRITE 2'b01
`define LINE_WRITE 2'b10
 
reg [1:0] bufferInStMachCurrState;
reg [1:0] bufferOutStMachCurrState;
 
// buffer control
always @(posedge clk)
begin
  if (rst == 1'b1)
  begin
    bufferCnt <= 3'b000;
  end
  else
  begin
    if (incBufferCnt == 1'b1 && decBufferCnt == 1'b0)
      bufferCnt <= bufferCnt + 1'b1;
    else if (incBufferCnt == 1'b0 && decBufferCnt == 1'b1)
      bufferCnt <= bufferCnt - 1'b1;
  end
end
 
 
//buffer input state machine 
always @(posedge clk) begin
  if (rst == 1'b1) begin
     incBufferCnt <= 1'b0;
    bufferInIndex <= 2'b00;
    buffer0 <= 3'b000;
    buffer1 <= 3'b000;
    buffer2 <= 3'b000;
    buffer3 <= 3'b000;
    USBWireRdy <= 1'b0;
    bufferInStMachCurrState <= `WAIT_BUFFER_NOT_FULL;
  end
  else begin
    case (bufferInStMachCurrState)
      `WAIT_BUFFER_NOT_FULL:
      begin
        if (bufferCnt != `BUFFER_FULL)  
        begin
          bufferInStMachCurrState <= `WAIT_WRITE_REQ;
          USBWireRdy <= 1'b1;
        end
      end
      `WAIT_WRITE_REQ:
      begin
        if (USBWireWEn == 1'b1)
        begin
          incBufferCnt <= 1'b1;
          USBWireRdy <= 1'b0;
          bufferInIndex <= bufferInIndex + 1'b1;
          case (bufferInIndex)
            2'b00 : buffer0 <= {TxBitsIn, TxCtrlIn};
            2'b01 : buffer1 <= {TxBitsIn, TxCtrlIn};
            2'b10 : buffer2 <= {TxBitsIn, TxCtrlIn};
            2'b11 : buffer3 <= {TxBitsIn, TxCtrlIn};
          endcase
          bufferInStMachCurrState <= `CLR_INC_BUFFER_CNT;
        end
      end
      `CLR_INC_BUFFER_CNT:
      begin
        incBufferCnt <= 1'b0;
        if (bufferCnt != (`BUFFER_FULL - 1'b1) )  
        begin
          bufferInStMachCurrState <= `WAIT_WRITE_REQ;
          USBWireRdy <= 1'b1;
        end
        else begin
          bufferInStMachCurrState <= `WAIT_BUFFER_NOT_FULL;
        end
      end
    endcase
  end
end
 
//increment counter used to generate USB bit rate
always @(posedge clk) begin
  if (rst == 1'b1)
  begin
    i <= 5'b00000;
    fullSpeedTick <= 1'b0;
    lowSpeedTick <= 1'b0;
  end
  else
  begin
    i <= i + 1'b1;
    if (i[1:0] == 2'b00)
      fullSpeedTick <= 1'b1;
    else
      fullSpeedTick <= 1'b0; 
    if (i == 5'b00000)
      lowSpeedTick <= 1'b1;
    else
      lowSpeedTick <= 1'b0;
  end
end
 
//buffer output state machine
//buffer is constantly emptied at either
//the full or low speed rate
//if the buffer is empty, then the output is forced to tri-state
always @(posedge clk) begin
  if (rst == 1'b1)
  begin
    bufferOutIndex <= 2'b00;
    decBufferCnt <= 1'b0;
    TxBitsOut <= 2'b00;
    TxCtrlOut <= `TRI_STATE;
    TxDataOutTick <= 1'b0;
    bufferOutStMachCurrState <= `WAIT_LINE_WRITE;
  end
  else
  begin
    case (bufferOutStMachCurrState)
      `WAIT_LINE_WRITE:
      begin
        if ((fullSpeedRate == 1'b1 && fullSpeedTick == 1'b1) || (fullSpeedRate == 1'b0 && lowSpeedTick == 1'b1) )
        begin
          TxDataOutTick <= !TxDataOutTick;
          if (bufferCnt == 0) begin
            TxBitsOut <= 2'b00;
            TxCtrlOut <= `TRI_STATE;
          end
          else begin
            bufferOutStMachCurrState <= `LINE_WRITE;
            decBufferCnt <= 1'b1;
            bufferOutIndex <= bufferOutIndex + 1'b1;
            case (bufferOutIndex)
              2'b00 :
            begin 
              TxBitsOut <= buffer0[2:1];
              TxCtrlOut <= buffer0[0];
            end
            2'b01 : 
            begin
              TxBitsOut <= buffer1[2:1];
              TxCtrlOut <= buffer1[0];
            end
            2'b10 : 
            begin 
              TxBitsOut <= buffer2[2:1];
              TxCtrlOut <= buffer2[0];
            end
            2'b11 : 
            begin
              TxBitsOut <= buffer3[2:1];
              TxCtrlOut <= buffer3[0];
            end
            endcase
          end
        end
      end
      `LINE_WRITE:
      begin
        decBufferCnt <= 1'b0;
        bufferOutStMachCurrState <= `WAIT_LINE_WRITE;
      end
    endcase
  end
end
 
// control 'TxWireActiveDrive' 
always @(TxCtrlOut)
begin  
  if (TxCtrlOut == `DRIVE)
    TxWireActiveDrive <= 1'b1;
  else
    TxWireActiveDrive <= 1'b0;
end
 
 
endmodule