URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [sw/] [drivers/] [simple-spi/] [simple-spi.c] - Rev 415
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Simple SPI module driver * * Julius Baxter, julius.baxter@orsoc.se * */ #include "board.h" #include "simple-spi.h" #include "cpu-utils.h" const int spi_base_adr[1] = {SPI0_BASE}; void spi_core_enable(int core) { REG8((spi_base_adr[core] + SIMPLESPI_SPCR)) |= SIMPLESPI_SPCR_SPE; } void spi_core_disable(int core) { REG8((spi_base_adr[core] + SIMPLESPI_SPCR)) &= ~SIMPLESPI_SPCR_SPE; } void spi_core_interrupt_enable(int core) { REG8((spi_base_adr[core] + SIMPLESPI_SPCR)) |= SIMPLESPI_SPCR_SPIE; } void spi_core_interrupt_disable(int core) { REG8((spi_base_adr[core] + SIMPLESPI_SPCR)) &= ~SIMPLESPI_SPCR_SPIE; } void spi_core_interrupt_flag_clear(int core) { REG8((spi_base_adr[core] + SIMPLESPI_SPSR)) = SIMPLESPI_SPSR_SPIF; } void spi_core_clock_setup(int core, char polarity, char phase, char rate, char ext_rate) { char spcr = REG8((spi_base_adr[core] + SIMPLESPI_SPCR)); if (polarity) spcr |= SIMPLESPI_SPCR_CPOL; else spcr &= ~SIMPLESPI_SPCR_CPOL; if (phase) spcr |= SIMPLESPI_SPCR_CPHA; else spcr &= ~SIMPLESPI_SPCR_CPHA; spcr = (spcr & ~SIMPLESPI_SPCR_SPR) | (rate & SIMPLESPI_SPCR_SPR); REG8((spi_base_adr[core] + SIMPLESPI_SPCR)) = spcr; char sper = REG8((spi_base_adr[core] + SIMPLESPI_SPER)); sper = (sper & ~SIMPLESPI_SPER_ESPR) | (ext_rate & SIMPLESPI_SPER_ESPR); REG8((spi_base_adr[core] + SIMPLESPI_SPER)) = sper; } void spi_core_set_int_count(int core, char cnt) { char sper = REG8((spi_base_adr[core] + SIMPLESPI_SPER)); sper = (sper & ~SIMPLESPI_SPER_ICNT) | cnt; REG8((spi_base_adr[core] + SIMPLESPI_SPER)) = sper; } // No decode on slave select lines, so assert correct bit to select slave void spi_core_slave_select(int core, char slave_sel_dec) { REG8((spi_base_adr[core] + SIMPLESPI_SSPU)) = slave_sel_dec; } int spi_core_data_avail(int core) { return !!!(REG8((spi_base_adr[core]+SIMPLESPI_SPSR))&SIMPLESPI_SPSR_RFEMPTY); } int spi_core_write_avail(int core) { return !!!(REG8((spi_base_adr[core]+SIMPLESPI_SPSR))&SIMPLESPI_SPSR_WFFULL); } // Should call spi_core_write_avail() before calling this, we don't check void spi_core_write_data(int core, char data) { REG8((spi_base_adr[core] + SIMPLESPI_SPDR)) = data; } char spi_core_read_data(int core) { return REG8((spi_base_adr[core] + SIMPLESPI_SPDR)); }
Go to most recent revision | Compare with Previous | Blame | View Log