URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [orpsocv2/] [sw/] [tests/] [or1200/] [sim/] [or1200-intsyscall.S] - Rev 724
Go to most recent revision | Compare with Previous | Blame | View Log
#include "spr-defs.h"
#include "board.h"
/*
User IRQ and system call simultaneous interrupt test
Within the test we'll use following global variables:
r15 syscall interrupt counter
r6 syscall function counter
r10 irq interrupt counter
r12 intgen's base address
The test does the following:
Uses the intgen module to schedule interrupts to see if they clash
with system calls.
Julius Baxter, ORSoC AB, julius.baxter@orsoc.se
*/
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2011 Authors and OPENCORES.ORG ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
/* =================================================== [ exceptions ] === */
.section .vectors, "ax"
/* ---[ 0x100: RESET exception ]----------------------------------------- */
.org 0x100
l.movhi r0, 0
/* Clear status register */
l.ori r1, r0, SPR_SR_SM
l.mtspr r0, r1, SPR_SR
/* Clear timer */
l.mtspr r0, r0, SPR_TTMR
/* Init the stack */
.global _stack
l.movhi r1, hi(_stack)
l.ori r1, r1, lo(_stack)
l.addi r2, r0, -3
l.and r1, r1, r2
/* Jump to program initialisation code */
.global _start
l.movhi r4, hi(_start)
l.ori r4, r4, lo(_start)
l.jr r4
l.nop
/* =================================================== [ User interrupt ] === */
.org 0x800
.global _user_irq_handler
_user_irq_handler:
l.addi r10, r10, 1
/* Report values , 0x00000800 == user interrupt report*/
l.ori r3, r0, 0x0800
l.nop 2
l.or r3, r0, r10
l.nop 2
/* TODO - propably confirm it was intgen's IRQ that caused this */
/* Clear interrupt source */
l.ori r7, r12, 0x1 /* intgen IRQ clear address */
l.sb 0(r7), r0 /* Any write clears the bit */
/* Clear OR1200 PICSR */
l.mfspr r7, r0, SPR_PICSR
l.mtspr r0, r7, SPR_PICSR
l.rfe
/* ========================================================= [ syscall ] === */
.org 0xC00
.extern _syscall_function
.global _syscall_handler
_syscall_handler:
l.addi r15, r15, 1
l.mfspr r7, r0, SPR_ESR_BASE /* Put ESR in r7, set back to ESR later */
l.mfspr r8, r0, SPR_EPCR_BASE/* Put EPCR in r8,set back to EPCR later*/
/* Unset IEE and TEE bits of SR */
l.ori r4, r0, SPR_SR_IEE|SPR_SR_TEE
l.ori r5, r0, 0xffff
l.xor r5, r5, r4
l.and r5, r7, r5 /* New SR without interrupt bits set */
l.mtspr r0, r5, SPR_ESR_BASE /* SR after l.rfe */
/* Report values , 0x00000c00 == system call report*/
l.ori r3, r0, 0x0c00
l.nop 2
/* Get syscall number */
l.lwz r3, -4(r8) /* r8 = load(EPCR-4)= PC of l.sys that caused this */
l.andi r3, r3, 0xffff /* get 16-bit immediate syscall number */
l.nop 2
l.movhi r4, hi(_syscall_function)
l.ori r4, r4, lo(_syscall_function)
l.mtspr r0, r4, SPR_EPCR_BASE
l.rfe
/* =================================================== [ text section ] === */
.section .text
/* =================================================== [ start ] === */
.global _start
_start:
// Kick off test
l.jal _main
l.nop
/* =================================================== [ main ] === */
.global _main
_main:
#
# unmask (enable) all ints
#
l.movhi r5,0xffff
l.ori r5,r5,0xffff
l.mtspr r0,r5,SPR_PICMR # set PICMR
/* Enable Interrupts */
l.mfspr r6,r0,SPR_SR
l.ori r6,r6,SPR_SR_IEE
l.mtspr r0,r6,SPR_SR
l.movhi r15, 0
l.movhi r6, 0
l.movhi r10, 0
// Assumes r12 is intgen's base address
l.movhi r12,hi(INTGEN_BASE)
#define INTGEN_LOAD(x) \
l.ori r5,r0,lo(x) ;\
l.sb 0(r12),r5
/* Test begin */
l.nop
INTGEN_LOAD(1)
l.sys 0x1
l.nop
INTGEN_LOAD(1)
l.nop
l.sys 0x2
l.nop
INTGEN_LOAD(2)
l.sys 0x3
l.nop
INTGEN_LOAD(2)
l.nop
l.sys 0x4
l.nop
l.ori r5,r0,1
l.sys 0x5
l.sb 0(r12),r5
l.nop
l.nop
l.nop
l.sfnei r6, 0xf /* Should equal 15, 0xf */
l.bf _fail
l.nop
l.movhi r3, hi(0x8000000d)
l.ori r3, r3, lo(0x8000000d)
l.nop 2
l.ori r3, r0, 0
l.nop 1
_fail:
l.movhi r3, hi(0xbaaaaaad)
l.ori r3, r3, lo(0xbaaaaaad)
l.nop 1
.global _syscall_function
_syscall_function:
/* r7 and r8 hold actual real ESR and EPCR, respectively */
/* We'll restore them now */
l.mtspr r0, r7, SPR_ESR_BASE /* SR before syscall */
l.mtspr r0, r8, SPR_EPCR_BASE
l.add r6, r6, r3 /* Add syscall number to our counter */
l.movhi r4, hi(0x00400000) /* 4MB mark of memory */
/* Ensure memory access OK */
l.slli r3, r3, 2 /* Turn syscall number into a word address (<< 2) */
l.add r4, r4, r3 /* Access this offset from 4MB mark */
l.sw 0(r4), r6 /* Do a write to memory */
l.lwz r6, 0(r4) /* Do a read from memory */
/* Report running value of syscall counter */
l.or r3, r0, r6
l.nop 2
l.rfe /* Now continue from where we had the l.sys */
Go to most recent revision | Compare with Previous | Blame | View Log