OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [acsupport/] [ltconfig] - Rev 174

Compare with Previous | Blame | View Log

#! /bin/sh

# ltconfig - Create a system-specific libtool.
# Copyright (C) 1996-1999 Free Software Foundation, Inc.
# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# A lot of this script is taken from autoconf-2.10.

# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
echo=echo
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
$*
EOF
  exit 0
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell.
  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
fi

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != "Xset"; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) PATH_SEPARATOR=';' ;;
    *)     PATH_SEPARATOR=':' ;;
  esac
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi

if test "X${echo_test_string+set}" != "Xset"; then
  # find a string as large as possible, as long as the shell can cope with it
  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
       echo_test_string="`eval $cmd`" &&
       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
      break
    fi
  done
fi

if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
  for dir in $PATH /usr/ucb; do
    if test -f $dir/echo &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
      echo='print -r'
    elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then
      # If we have ksh, try running ltconfig again with it.
      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
      export ORIGINAL_CONFIG_SHELL
      CONFIG_SHELL=/bin/ksh
      export CONFIG_SHELL
      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
    else
      # Try using printf.
      echo='printf "%s\n"'
      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
         test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
        # Cool, printf works
        :
      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
           test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
        CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
        export CONFIG_SHELL
        SHELL="$CONFIG_SHELL"
        export SHELL
        echo="$CONFIG_SHELL $0 --fallback-echo"
      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
           test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
        echo="$CONFIG_SHELL $0 --fallback-echo"
      else
        # maybe with a smaller string...
        prev=:

        for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
          if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
            break
          fi
          prev="$cmd"
        done

        if test "$prev" != 'sed 50q "$0"'; then
          echo_test_string=`eval $prev`
          export echo_test_string
          exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
        else
          # Oops.  We lost completely, so just stick with echo.
          echo=echo
        fi
      fi
    fi
  fi
fi

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# The name of this program.
progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`

# Constants:
PROGRAM=ltconfig
PACKAGE=libtool
VERSION=1.2f
TIMESTAMP=" (1.385 1999/03/15 17:24:54)"
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
rm="rm -f"

help="Try \`$progname --help' for more information."

# Global variables:
default_ofile=libtool
can_build_shared=yes
enable_shared=yes
# All known linkers require a `.a' archive for static linking.
enable_static=yes
enable_fast_install=yes
enable_dlopen=unknown
ltmain=
silent=
srcdir=
ac_config_guess=
ac_config_sub=
host=
nonopt=
ofile="$default_ofile"
verify_host=yes
with_gcc=no
with_gnu_ld=no
need_locks=yes
ac_ext=c
objext=o
libext=a
cache_file=

old_AR="$AR"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
old_CPPFLAGS="$CPPFLAGS"
old_LD="$LD"
old_LN_S="$LN_S"
old_NM="$NM"
old_RANLIB="$RANLIB"
old_DLLTOOL="$DLLTOOL"
old_AS="$AS"

# Parse the command line options.
args=
prev=
for option
do
  case "$option" in
  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) optarg= ;;
  esac

  # If the previous option needs an argument, assign it.
  if test -n "$prev"; then
    eval "$prev=\$option"
    prev=
    continue
  fi

  case "$option" in
  --help) cat <<EOM
Usage: $progname [OPTION]... [HOST [LTMAIN]]

Generate a system-specific libtool script.

    --debug                enable verbose shell tracing
    --disable-shared       do not build shared libraries
    --disable-static       do not build static libraries
    --disable-fast-install do not optimize for fast installation
    --enable-dlopen        enable dlopen support
    --enable-dlopen-self   enable support for dlopening programs
    --help                 display this help and exit
    --no-verify            do not verify that HOST is a valid host type
-o, --output=FILE          specify the output file [default=$default_ofile]
    --quiet                same as \`--silent'
    --silent               do not print informational messages
    --srcdir=DIR           find \`config.guess' in DIR
    --version              output version information and exit
    --with-gcc             assume that the GNU C compiler will be used
    --with-gnu-ld          assume that the C compiler uses the GNU linker
    --disable-lock         disable file locking
    --cache-file=FILE      configure cache file

LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
that provides basic libtool functionality.

HOST is the canonical host system name [default=guessed].
EOM
  exit 0
  ;;

  --debug)
    echo "$progname: enabling shell trace mode"
    set -x
    ;;

  --disable-shared) enable_shared=no ;;

  --disable-static) enable_static=no ;;

  --disable-fast-install) enable_fast_install=no ;;

  --enable-dlopen) enable_dlopen=yes ;;

  --quiet | --silent) silent=yes ;;

  --srcdir) prev=srcdir ;;
  --srcdir=*) srcdir="$optarg" ;;

  --no-verify) verify_host=no ;;

  --output | -o) prev=ofile ;;
  --output=*) ofile="$optarg" ;;

  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;

  --with-gcc) with_gcc=yes ;;
  --with-gnu-ld) with_gnu_ld=yes ;;

  --disable-lock) need_locks=no ;;

  --cache-file=*) cache_file="$optarg" ;;

  -*)
    echo "$progname: unrecognized option \`$option'" 1>&2
    echo "$help" 1>&2
    exit 1
    ;;

  *)
    if test -z "$ltmain"; then
      ltmain="$option"
    elif test -z "$host"; then
# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
#      fi
      host="$option"
    else
      echo "$progname: too many arguments" 1>&2
      echo "$help" 1>&2
      exit 1
    fi ;;
  esac
done

if test -z "$ltmain"; then
  echo "$progname: you must specify a LTMAIN file" 1>&2
  echo "$help" 1>&2
  exit 1
fi

if test ! -f "$ltmain"; then
  echo "$progname: \`$ltmain' does not exist" 1>&2
  echo "$help" 1>&2
  exit 1
fi

# Quote any args containing shell metacharacters.
ltconfig_args=
for arg
do
  case "$arg" in
  *" "*|*"      "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ltconfig_args="$ltconfig_args '$arg'" ;;
  *) ltconfig_args="$ltconfig_args $arg" ;;
  esac
done

# A relevant subset of AC_INIT.

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 5 compiler messages saved in config.log
# 6 checking for... messages and results
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>>./config.log

# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi

if test -n "$cache_file" && test -r "$cache_file"; then
  echo "loading cache $cache_file within ltconfig"
  . $cache_file
fi

if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='        '
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi

if test -z "$srcdir"; then
  # Assume the source directory is the same one as the path to LTMAIN.
  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
  test "$srcdir" = "$ltmain" && srcdir=.
fi

trap "$rm conftest*; exit 1" 1 2 15
if test "$verify_host" = yes; then
  # Check for config.guess and config.sub.
  ac_aux_dir=
  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
    if test -f $ac_dir/config.guess; then
      ac_aux_dir=$ac_dir
      break
    fi
  done
  if test -z "$ac_aux_dir"; then
    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
    echo "$help" 1>&2
    exit 1
  fi
  ac_config_guess=$ac_aux_dir/config.guess
  ac_config_sub=$ac_aux_dir/config.sub

  # Make sure we can run config.sub.
  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
  else
    echo "$progname: cannot run $ac_config_sub" 1>&2
    echo "$help" 1>&2
    exit 1
  fi

  echo $ac_n "checking host system type""... $ac_c" 1>&6

  host_alias=$host
  case "$host_alias" in
  "")
    if host_alias=`$SHELL $ac_config_guess`; then :
    else
      echo "$progname: cannot guess host type; you must specify one" 1>&2
      echo "$help" 1>&2
      exit 1
    fi ;;
  esac
  host=`$SHELL $ac_config_sub $host_alias`
  echo "$ac_t$host" 1>&6

  # Make sure the host verified.
  test -z "$host" && exit 1

elif test -z "$host"; then
  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
  echo "$help" 1>&2
  exit 1
else
  host_alias=$host
fi

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case "$host_os" in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac

host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`

case "$host_os" in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "${COLLECT_NAMES+set}" != set; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Determine commands to create old-style static archives.
old_archive_cmds='$AR cru $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

# Set a sane default for `AR'.
test -z "$AR" && AR=ar

# If RANLIB is not set, then run the test.
if test "${RANLIB+set}" != "set"; then
  result=no

  echo $ac_n "checking for ranlib... $ac_c" 1>&6
  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/ranlib; then
      RANLIB="ranlib"
      result="ranlib"
      break
    fi
  done
  IFS="$save_ifs"

  echo "$ac_t$result" 1>&6
fi

if test -n "$RANLIB"; then
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
fi

# Set sane defaults for `DLLTOOL' and `AS', used on cygwin.
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$AS" && AS=as

# Check to see if we are using GCC.
if test "$with_gcc" != yes || test -z "$CC"; then
  # If CC is not set, then try to find GCC or a usable CC.
  if test -z "$CC"; then
    echo $ac_n "checking for gcc... $ac_c" 1>&6
    IFS="${IFS=         }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
    for dir in $PATH; do
      IFS="$save_ifs"
      test -z "$dir" && dir=.
      if test -f $dir/gcc; then
        CC="gcc"
        break
      fi
    done
    IFS="$save_ifs"

    if test -n "$CC"; then
      echo "$ac_t$CC" 1>&6
    else
      echo "$ac_t"no 1>&6
    fi
  fi

  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
  if test -z "$CC"; then
    echo $ac_n "checking for cc... $ac_c" 1>&6
    IFS="${IFS=         }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
    cc_rejected=no
    for dir in $PATH; do
      test -z "$dir" && dir=.
      if test -f $dir/cc; then
        if test "$dir/cc" = "/usr/ucb/cc"; then
          cc_rejected=yes
          continue
        fi
        CC="cc"
        break
      fi
    done
    IFS="$save_ifs"
    if test $cc_rejected = yes; then
      # We found a bogon in the path, so make sure we never use it.
      set dummy $CC
      shift
      if test $# -gt 0; then
        # We chose a different compiler from the bogus one.
        # However, it has the same name, so the bogon will be chosen
        # first if we set CC to just the name; use the full file name.
        shift
        set dummy "$dir/cc" "$@"
        shift
        CC="$@"
      fi
    fi

    if test -n "$CC"; then
      echo "$ac_t$CC" 1>&6
    else
      echo "$ac_t"no 1>&6
    fi

    if test -z "$CC"; then
      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
      exit 1
    fi
  fi

  # Now see if the compiler is really GCC.
  with_gcc=no
  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
  echo "$progname:564: checking whether we are using GNU C" >&5

  $rm conftest.c
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:572: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
    with_gcc=yes
  fi
  $rm conftest.c
  echo "$ac_t$with_gcc" 1>&6
fi

# Allow CC to be a program name with arguments.
set dummy $CC
compiler="$2"

echo $ac_n "checking for object suffix... $ac_c" 1>&6
$rm conftest*
echo 'int i = 1;' > conftest.c
echo "$progname:586: checking for object suffix" >& 5
if { (eval echo $progname:587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
  # Append any warnings to the config.log.
  cat conftest.err 1>&5

  for ac_file in conftest.*; do
    case $ac_file in
    *.c) ;;
    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
    esac
  done
else
  cat conftest.err 1>&5
  echo "$progname: failed program was:" >&5
  cat conftest.c >&5
fi
$rm conftest*
echo "$ac_t$objext" 1>&6

echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
pic_flag=
special_shlib_compile_flags=
wl=
link_static_flag=
no_builtin_flag=

if test "$with_gcc" = yes; then
  wl='-Wl,'
  link_static_flag='-static'

  case "$host_os" in
  beos* | irix5* | irix6* | osf3* | osf4*)
    # PIC is the default for these OSes.
    ;;
  aix*)
    # Below there is a dirty hack to force normal static linking with -ldl
    # The problem is because libdl dynamically linked with both libc and
    # libC (AIX C++ library), which obviously doesn't included in libraries
    # list by gcc. This cause undefined symbols with -static flags.
    # This hack allows C programs to be linked with "-static -ldl", but
    # we not sure about C++ programs.
    link_static_flag="$link_static_flag ${wl}-lC"
    ;;
  cygwin* | mingw* | os2*)
    # We can build DLLs from non-PIC.
    ;;
  amigaos*)
    # FIXME: we need at least 68020 code to build shared libraries, but
    # adding the `-m68020' flag to GCC prevents building anything better,
    # like `-m68040'.
    pic_flag='-m68020 -resident32 -malways-restore-a4'
    ;;
  *)
    pic_flag='-fPIC'
    ;;
  esac
else
  # PORTME Check for PIC flags for the system compiler.
  case "$host_os" in
  aix3* | aix4*)
    # All AIX code is PIC.
    link_static_flag='-bnso -bI:/lib/syscalls.exp'
    ;;

  hpux9* | hpux10* | hpux11*)
    # Is there a better link_static_flag that works with the bundled CC?
    wl='-Wl,'
    link_static_flag="${wl}-a ${wl}archive"
    pic_flag='+Z'
    ;;

  irix5* | irix6*)
    wl='-Wl,'
    link_static_flag='-non_shared'
    # PIC (with -KPIC) is the default.
    ;;

  cygwin* | mingw* | os2*)
    # We can build DLLs from non-PIC.
    ;;

  osf3* | osf4*)
    # All OSF/1 code is PIC.
    wl='-Wl,'
    link_static_flag='-non_shared'
    ;;

  sco3.2v5*)
    pic_flag='-Kpic'
    link_static_flag='-dn'
    special_shlib_compile_flags='-belf'
    ;;

  solaris*)
    pic_flag='-KPIC'
    link_static_flag='-Bstatic'
    wl='-Wl,'
    ;;

  sunos4*)
    pic_flag='-PIC'
    link_static_flag='-Bstatic'
    wl='-Qoption ld '
    ;;

  sysv4.2uw2* | sysv4.3* | sysv5*)
    pic_flag='-KPIC'
    link_static_flag='-Bstatic'
    wl='-Wl,'
    ;;

  uts4*)
    pic_flag='-pic'
    link_static_flag='-Bstatic'
    ;;

  *)
    can_build_shared=no
    ;;
  esac
fi

if test -n "$pic_flag"; then
  echo "$ac_t$pic_flag" 1>&6

  # Check to make sure the pic_flag actually works.
  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
  $rm conftest*
  echo "int some_variable = 0;" > conftest.c
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS $pic_flag -DPIC"
  echo "$progname:717: checking if $compiler PIC flag $pic_flag works" >&5
  if { (eval echo $progname:718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
    # Append any warnings to the config.log.
    cat conftest.err 1>&5
    
    case "$host_os" in
    hpux9* | hpux10* | hpux11*)
      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
      # create non-PIC objects.  So, if there were any warnings, we assume that
      # PIC is not supported.
      if test -s conftest.err; then
        echo "$ac_t"no 1>&6
        can_build_shared=no
        pic_flag=
      else
        echo "$ac_t"yes 1>&6
        pic_flag=" $pic_flag"
      fi
      ;;
    *)
      echo "$ac_t"yes 1>&6
      pic_flag=" $pic_flag"
      ;;
    esac
  else
    # Append any errors to the config.log.
    cat conftest.err 1>&5
    can_build_shared=no
    pic_flag=
    echo "$ac_t"no 1>&6
  fi
  CFLAGS="$save_CFLAGS"
  $rm conftest*
else
  echo "$ac_t"none 1>&6
fi

# Check to see if options -o and -c are simultaneously supported by compiler
echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
$rm conftest*
echo "int some_variable = 0;" > conftest.c
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -c -o conftest2.o"
echo "$progname:760: checking if $compiler supports -c -o file.o" >&5
if { (eval echo $progname:761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest2.o; then

  # The compiler can only warn and ignore the option if not recognized
  # So say no if there are warnings
    if test -s conftest.err; then
      echo "$ac_t"no 1>&6
      compiler_c_o=no
    else
      echo "$ac_t"yes 1>&6
      compiler_c_o=yes
    fi
else
  # Append any errors to the config.log.
  cat conftest.err 1>&5
  compiler_c_o=no
  echo "$ac_t"no 1>&6
fi
CFLAGS="$save_CFLAGS"
$rm conftest*

if test x"$compiler_c_o" = x"yes"; then
  # Check to see if we can write to a .lo
  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
  $rm conftest*
  echo "int some_variable = 0;" > conftest.c
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -c -o conftest.lo"
  echo "$progname:788: checking if $compiler supports -c -o file.lo" >&5
if { (eval echo $progname:789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then

    # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
      if test -s conftest.err; then
        echo "$ac_t"no 1>&6
        compiler_o_lo=no
      else
        echo "$ac_t"yes 1>&6
        compiler_o_lo=yes
      fi
  else
    # Append any errors to the config.log.
    cat conftest.err 1>&5
    compiler_o_lo=no
    echo "$ac_t"no 1>&6
  fi
  CFLAGS="$save_CFLAGS"
  $rm conftest*
else
  compiler_o_lo=no
fi

# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  echo "$ac_t$hard_links" 1>&6
  $rm conftest*
  if test "$hard_links" = no; then
    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
    need_locks=warn
  fi
else
  need_locks=no
fi

if test "$with_gcc" = yes; then
  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
  $rm conftest*
  echo "int some_variable = 0;" > conftest.c
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
  echo "$progname:840: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
  if { (eval echo $progname:841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then

    # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
      if test -s conftest.err; then
        echo "$ac_t"no 1>&6
        compiler_rtti_exceptions=no
      else
        echo "$ac_t"yes 1>&6
        compiler_rtti_exceptions=yes
      fi
  else
    # Append any errors to the config.log.
    cat conftest.err 1>&5
    compiler_rtti_exceptions=no
    echo "$ac_t"no 1>&6
  fi
  CFLAGS="$save_CFLAGS"
  $rm conftest*

  if test "$compiler_rtti_exceptions" = "yes"; then
    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
  else
    no_builtin_flag=' -fno-builtin'
  fi
  
fi

# Check for any special shared library compilation flags.
if test -n "$special_shlib_compile_flags"; then
  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
  if echo "$old_CC $old_CFLAGS " | egrep -e "[  ]$special_shlib_compile_flags[  ]" >/dev/null; then :
  else
    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
    can_build_shared=no
  fi
fi

echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
$rm conftest*
echo 'main(){return(0);}' > conftest.c
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $link_static_flag"
echo "$progname:884: checking if $compiler static flag $link_static_flag works" >&5
if { (eval echo $progname:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
  echo "$ac_t$link_static_flag" 1>&6
else
  echo "$ac_t"none 1>&6
  link_static_flag=
fi
LDFLAGS="$save_LDFLAGS"
$rm conftest*

if test -z "$LN_S"; then
  # Check to see if we can use ln -s, or we need hard links.
  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
  $rm conftestdata
  if ln -s X conftestdata 2>/dev/null; then
    $rm conftestdata
    LN_S="ln -s"
  else
    LN_S=ln
  fi
  if test "$LN_S" = "ln -s"; then
    echo "$ac_t"yes 1>&6
  else
    echo "$ac_t"no 1>&6
  fi
fi

# Make sure LD is an absolute path.
if test -z "$LD"; then
  ac_prog=ld
  if test "$with_gcc" = yes; then
    # Check if gcc -print-prog-name=ld gives a path.
    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
    echo "$progname:917: checking for ld used by GCC" >&5
    ac_prog=`($CC -print-prog-name=ld) 2>&5`
    case "$ac_prog" in
    # Accept absolute paths.
    /* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
    "")
      # If it fails, then pretend we are not using GCC.
      ac_prog=ld
      ;;
    *)
      # If it is relative, then search for the first ld in PATH.
      with_gnu_ld=unknown
      ;;
    esac
  elif test "$with_gnu_ld" = yes; then
    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
    echo "$progname:941: checking for GNU ld" >&5
  else
    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
    echo "$progname:944: checking for non-GNU ld" >&5
  fi

  if test -z "$LD"; then
    IFS="${IFS=         }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
    for ac_dir in $PATH; do
      test -z "$ac_dir" && ac_dir=.
      if test -f "$ac_dir/$ac_prog"; then
        LD="$ac_dir/$ac_prog"
        # Check to see if the program is GNU ld.  I'd rather use --version,
        # but apparently some GNU ld's only accept -v.
        # Break only if it was the GNU/non-GNU ld that we prefer.
        if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
          test "$with_gnu_ld" != no && break
        else
          test "$with_gnu_ld" != yes && break
        fi
      fi
    done
    IFS="$ac_save_ifs"
  fi

  if test -n "$LD"; then
    echo "$ac_t$LD" 1>&6
  else
    echo "$ac_t"no 1>&6
  fi

  if test -z "$LD"; then
    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
    exit 1
  fi
fi

# Check to see if it really is or is not GNU ld.
echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  with_gnu_ld=yes
else
  with_gnu_ld=no
fi
echo "$ac_t$with_gnu_ld" 1>&6

# See if the linker supports building shared libraries.
echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6

allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
always_export_symbols=no
export_symbols_cmds='$NM $libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms=

case "$host_os" in
cygwin* | mingw*)
  # FIXME: the MSVC++ port hasn't been tested in a loooong time
  # When not using gcc, we currently assume that we are using
  # Microsoft Visual C++.
  if test "$with_gcc" != yes; then
    with_gnu_ld=no
  fi
  ;;

freebsd2* | sunos4*)
  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
  ;;

esac

ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
  # If archive_cmds runs LD, not CC, wlarc should be empty
  wlarc='${wl}'

  # See if GNU ld supports shared libraries.
  case "$host_os" in
  aix3* | aix4*)
    # On AIX, the GNU linker is very broken
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
    ;;

  amigaos*)
    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    ;;

  sunos4*)
    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
    wlarc=
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  beos*)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  cygwin* | mingw*)
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec='-L$libdir'
    allow_undefined_flag=unsupported
    always_export_symbols=yes

    # Extract the symbol export list from an `--export-all' def file,
    # then regenerate the def file from the symbol export list, so that
    # the compiled dll only exports the symbol export list.
    export_symbols_cmds='rm -f $objdir/$soname-ltdll.c~
      sed -e "/^# \/\* ltdll.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
      (cd $objdir && $CC -c $soname-ltdll.c)~
      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs~
      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'

    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
      _lt_hint=1;
      for symbol in `cat $export_symbols`; do
        echo "  \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
        _lt_hint=`expr 1 + \$_lt_hint`;
      done~
      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'

      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a'
    ;;

  *)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;
  esac

  if test "$ld_shlibs" = yes; then
    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec='${wl}--export-dynamic'
    whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
  fi
else
  # PORTME fill in a description of your system's linker (not GNU ld)
  case "$host_os" in
  aix3*)
    allow_undefined_flag=unsupported
    always_export_symbols=yes
    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
    # Note: this linker hardcodes the directories in LIBPATH if there
    # are no directories specified by -L.
    hardcode_minus_L=yes
    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
      # Neither direct hardcoding nor static linking is supported with a
      # broken collect2.
      hardcode_direct=unsupported
    fi
    ;;

  aix4*)
    allow_undefined_flag=
    if test "$with_gcc" = yes; then
      if strings `${CC} -print-prog-name=collect2` | \
         grep resolve_lib_name >/dev/null
      then
        # We have reworked collect2
        hardcode_direct=yes
      else
        # We have old collect2
        hardcode_direct=unsupported
      fi
      archive_cmds='$CC -shared ${wl}-bnoentry -o $objdir/$soname $libobjs $deplibs $linkopts'
    else
      always_export_symbols=yes
      archive_expsym_cmds='$CC -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bM:SRE ${wl}-bnoentry'
      hardcode_direct=yes
    fi
    hardcode_minus_L=yes
    # Though LIBPATH variable hardcodes shlibpath into executable,
    # it doesn't affect searching for -l* libraries; this confuses
    # tests in mdemo.
    hardcode_shlibpath_var=unsupported
    hardcode_libdir_flag_spec='-L$libdir'
   ;;

  amigaos*)
    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    ;;

  cygwin* | mingw*)
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec=' '
    allow_undefined_flag=unsupported
    # Tell ltmain to make .lib files, not .a files.
    libext=lib
    # FIXME: Setting linknames here is a bad hack.
    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
    # The linker will automatically build a .lib file if we build a DLL.
    old_archive_from_new_cmds='true'
    # FIXME: Should let the user specify the lib program.
    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
    fix_srcfile_path='`cygpath -w $srcfile`'
    ;;

  freebsd1*)
    ld_shlibs=no
    can_build_shared=no
    ;;

  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
  # support.  Future versions do this automatically, but an explicit c++rt0.o
  # does not break anything, and helps significantly (at the cost of a little
  # extra space).
  freebsd2.2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_minus_L=no # verified on 2.2.6
    hardcode_shlibpath_var=no
    ;;

  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
  freebsd2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
  freebsd*)
    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    ;;

  hpux9*)
    archive_cmds='$rm $objdir/$soname~$LD -b +s +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib'
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    export_dynamic_flag_spec='${wl}-E'
    ;;

  hpux10* | hpux11*)
    archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib $libobjs $deplibs $linkopts'
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    export_dynamic_flag_spec='${wl}-E'
    ;;

  irix5* | irix6*)
    if test "$with_gcc" = yes; then
      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
    else
      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
    else
      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
    fi
    hardcode_libdir_flag_spec='${wl}-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  openbsd*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  os2*)
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    allow_undefined_flag=unsupported
    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
    ;;

  osf3* | osf4*)
    if test "$with_gcc" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    ;;

  sco3.2v5*)
    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
    hardcode_direct=yes
    ;;

  solaris*)
    no_undefined_flag=' -z text'
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
                $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_shlibpath_var=no
    ;;

  sunos4*)
    # Why do we need -Bstatic?  To avoid inter-library dependencies, maybe...
    if test "$with_gcc" = yes; then
      # Use -fPIC here because libgcc is multilibbed
      archive_cmds='$CC -shared ${wl}-Bstatic -fPIC -o $lib $libobjs $deplibs $linkopts'
    else
      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
    fi
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  sysv4.3*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
    hardcode_direct=no
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    export_dynamic_flag_spec='-Bexport'
    ;;

  uts4*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=no
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    ;;

  dgux*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=no
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    ;;

  *)
    ld_shlibs=no
    can_build_shared=no
    ;;
  esac
fi
echo "$ac_t$ld_shlibs" 1>&6

if test -z "$NM"; then
  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
  case "$NM" in
  /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path.
  *)
    IFS="${IFS=         }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
      test -z "$ac_dir" && ac_dir=.
      if test -f $ac_dir/nm; then
        # Check to see if the nm accepts a BSD-compat flag.
        # Adding the `sed 1q' prevents false positives on HP-UX, which says:
        #   nm: unknown option "B" ignored
        if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
          NM="$ac_dir/nm -B"
          break
        elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
          NM="$ac_dir/nm -p"
          break
        else
          NM=${NM="$ac_dir/nm"} # keep the first match, but
          continue # so that we can try to find one that supports BSD flags
        fi
      fi
    done
    IFS="$ac_save_ifs"
    test -z "$NM" && NM=nm
    ;;
  esac
  echo "$ac_t$NM" 1>&6
fi

# Check for command to grab the raw symbol name followed by C symbol from nm.
echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6

# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"

# Define system-specific variables.
case "$host_os" in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
  ;;
irix*)
  symcode='[BCDEGRST]'
  ;;
solaris*)
  symcode='[BDT]'
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  symcode='[ABCDGISTW]'
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
  global_symbol_pipe="sed -n -e 's/^.*[         ]\($symcode\)[  ][      ]*\($ac_symprfx\)$sympat$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no
  $rm conftest*
  cat > conftest.c <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  echo "$progname:1447: checking if global_symbol_pipe works" >&5
  if { (eval echo $progname:1448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { echo "$progname:1451: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then

      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
        mv -f "$nlist"T "$nlist"
      else
        rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
        if egrep ' nm_test_func$' "$nlist" >/dev/null; then
          cat <<EOF > conftest.c
#ifdef __cplusplus
extern "C" {
#endif

EOF
          # Now generate the symbol file.
          eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'

          cat <<EOF >> conftest.c
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
          sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
          cat <<\EOF >> conftest.c
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
          # Now try linking the two files.
          mv conftest.$objext conftestm.$objext
          save_LIBS="$LIBS"
          save_CFLAGS="$CFLAGS"
          LIBS="conftestm.$objext"
          CFLAGS="$CFLAGS$no_builtin_flag"
          if { (eval echo $progname:1503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
            pipe_works=yes
          else
            echo "$progname: failed program was:" >&5
            cat conftest.c >&5
          fi
          LIBS="$save_LIBS"
        else
          echo "cannot find nm_test_func in $nlist" >&5
        fi
      else
        echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.c >&5
  fi
  $rm conftest*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    global_symbol_pipe=
  fi
done
echo "$ac_t$pipe_works" 1>&6

if test -z "$global_symbol_pipe"; then
  global_symbol_to_cdecl=
fi

# Check hardcoding attributes.
echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.
  if test "$hardcode_direct" != no && \
     test "$hardcode_minus_L" != no && \
     test "$hardcode_shlibpath_var" != no; then

    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
echo "$ac_t$hardcode_action" 1>&6


reload_flag=
reload_cmds='$LD$reload_flag -o $output$reload_objs'
echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
# PORTME Some linkers may need a different reload flag.
reload_flag='-r'
echo "$ac_t$reload_flag" 1>&6
test -n "$reload_flag" && reload_flag=" $reload_flag"

# PORTME Fill in your ld.so characteristics
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
file_magic_cmd=
file_magic_test_file=
deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [regex]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
case "$host_os" in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4*)
  version_type=linux
  # AIX has no versioning support, so currently we can not hardcode correct
  # soname into executable. Probably we can add versioning support to
  # collect2, so additional links can be useful in future.
  # We preserve .a as extension for shared libraries though AIX4.2
  # and later linker supports .so
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
  shlibpath_var=LIBPATH
  deplibs_check_method=pass_all
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

bsdi4*)
  version_type=linux
  library_names_spec='${libname}.so$major ${libname}.so'
  soname_spec='${libname}.so'
  finish_cmds='PATH="$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  deplibs_check_method='file_magic ELF 32-bit LSB shared object'
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=/shlib/libc.so
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw*)
  version_type=windows
  if test "$with_gcc" = yes; then
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
  else
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
  fi
  dynamic_linker='Win32 ld.exe'
  deplibs_check_method='file_magic file format pei*-i386.*architecture: i386'
  file_magic_cmd='objdump -f'
  need_lib_prefix=no
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

freebsd1*)
  dynamic_linker=no
  ;;
  
freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
  version_type=freebsd-$objformat
  case "$version_type" in
    freebsd-elf*)
      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
      file_magic_cmd=/usr/bin/file
      file_magic_test_file=`echo /usr/lib/libc.so*`
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      deplibs_check_method=unknown
      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
      need_version=yes
      ;;
  esac
  finish_cmds='PATH="$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

gnu*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  dynamic_linker="$host_os dld.sl"
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  shlibpath_var=SHLIB_PATH
  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
  soname_spec='${libname}${release}.sl$major'
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5*)
  version_type=irix
  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" # or should it be pass_all?
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=`echo /lib/libc.so*`
  shlibpath_overrides_runpath=no
  ;;

irix6*)
  version_type=irix
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  case "$LD" in # libtool.m4 will add one of these switches to LD
  *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
  *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
  *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
  *) libsuff= shlibsuff= libmagic=never-match;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  # even though /usr/local/lib is always searched, the man-page says
  # shared libraries should not be installed there if they use an ABI
  # different from -32, so we'd better not search for shared libraries
  # there either
  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
  deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" # or should it be pass_all?
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`

  if test -f /lib/ld.so.1; then
    dynamic_linker='GNU ld.so'
  else
    # Only the GNU ld.so supports shared libraries on MkLinux.
    case "$host_cpu" in
    powerpc*) dynamic_linker=no ;;
    *) dynamic_linker='Linux ld.so' ;;
    esac
  fi
  ;;

netbsd*)
  version_type=sunos
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
    finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
    soname_spec='${libname}${release}.so$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  ;;

openbsd*)
  version_type=sunos
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
    need_version=no
  fi
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4*)
  version_type=osf
  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  # deplibs_check_method='pass_all'
  # Although pass_all appears to work, it copies symbols from static libraries
  # into shared ones and exports them.  So, when a program is linked with two
  # or more libraries that have got copies of the same symbols, link fails
  # This was only tested on osf4:
  deplibs_check_method='file_magic COFF format alpha shared library'
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=/shlib/libc.so
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=/lib/libc.so
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4.2uw2* | sysv4.3* | sysv5*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case "$host_vendor" in
    ncr)
      deplibs_check_method='pass_all'
      ;;
  esac
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

*)
  dynamic_linker=no
  ;;
esac
echo "$ac_t$dynamic_linker" 1>&6
test "$dynamic_linker" = no && can_build_shared=no

# Report the final consequences.
echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6

if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
  case "$deplibs_check_method" in
  "file_magic "*)
    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
       egrep "$file_magic_regex" > /dev/null; then
      :
    else
      cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
    fi ;;
  esac
fi

echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case "$host_os" in
aix3*)
  test "$enable_shared" = yes && enable_static=no
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix4*)
  test "$enable_shared" = yes && enable_static=no
  ;;
esac

echo "$ac_t$enable_shared" 1>&6

# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes

echo "checking whether to build static libraries... $enable_static" 1>&6

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

echo $ac_n "checking for objdir... $ac_c" 1>&6
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  objdir=_libs
fi
rmdir .libs 2>/dev/null
echo "$ac_t$objdir" 1>&6

if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
  lt_cv_dlopen=no lt_cv_dlopen_libs=
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
echo "$progname:1977: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1982 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
dlopen();
#endif

; return 0; }
EOF
if { (eval echo $progname:2004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dlopen=yes"
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dlopen=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "$progname:2022: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2030 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo $progname:2040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
echo "$progname:2059: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2067 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dld_link();

int main() {
dld_link()
; return 0; }
EOF
if { (eval echo $progname:2077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load""... $ac_c" 1>&6
echo "$progname:2096: checking for shl_load" >&5
if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2101 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shl_load(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
shl_load();
#endif

; return 0; }
EOF
if { (eval echo $progname:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_shl_load=yes"
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_shl_load=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for LoadLibrary""... $ac_c" 1>&6
echo "$progname:2141: checking for LoadLibrary" >&5
if eval "test \"`echo '$''{'ac_cv_func_LoadLibrary'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2146 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char LoadLibrary(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char LoadLibrary();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_LoadLibrary) || defined (__stub___LoadLibrary)
choke me
#else
LoadLibrary();
#endif

; return 0; }
EOF
if { (eval echo $progname:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_LoadLibrary=yes"
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_LoadLibrary=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'LoadLibrary`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="LoadLibrary"
else
  echo "$ac_t""no" 1>&6
fi

      
fi

    
fi

  
fi


fi

fi

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  fi

  case "$lt_cv_dlopen" in
  dlopen)
for ac_hdr in dlfcn.h; do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "$progname:2210: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2215 "ltconfig"
#include <$ac_hdr>
int fnord = 0;
EOF
ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo $progname:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
done

    if test "x$ac_cv_header_dlfcn_h" = xyes; then
      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
    fi
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
    LIBS="$lt_cv_dlopen_libs $LIBS"

  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
echo "$progname:2248: checking whether a program can dlopen itself" >&5
if test "${lt_cv_dlopen_self+set}" = set; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    lt_cv_dlopen_self=cross
  else
    cat > conftest.c <<EOF
#line 2256 "ltconfig"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
# define LTDL_GLOBAL    RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
#  define LTDL_GLOBAL   DL_GLOBAL
# else
#  define LTDL_GLOBAL   0
# endif
#endif

/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LTDL_LAZY_OR_NOW
# ifdef RTLD_LAZY
#  define LTDL_LAZY_OR_NOW      RTLD_LAZY
# else
#  ifdef DL_LAZY
#   define LTDL_LAZY_OR_NOW     DL_LAZY
#  else
#   ifdef RTLD_NOW
#    define LTDL_LAZY_OR_NOW    RTLD_NOW
#   else
#    ifdef DL_NOW
#     define LTDL_LAZY_OR_NOW   DL_NOW
#    else
#     define LTDL_LAZY_OR_NOW   0
#    endif
#   endif
#  endif
# endif
#endif

fnord() { int i=42;}
main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
               if(ptr1 || ptr2) exit(0); } exit(1); } 

EOF
if { (eval echo $progname:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
  lt_cv_dlopen_self=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  lt_cv_dlopen_self=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$lt_cv_dlopen_self" 1>&6

  if test "$lt_cv_dlopen_self" = yes; then
    LDFLAGS="$LDFLAGS $link_static_flag"
  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
echo "$progname:2321: checking whether a statically linked program can dlopen itself" >&5
if test "${lt_cv_dlopen_self_static+set}" = set; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    lt_cv_dlopen_self_static=cross
  else
    cat > conftest.c <<EOF
#line 2329 "ltconfig"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
# define LTDL_GLOBAL    RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
#  define LTDL_GLOBAL   DL_GLOBAL
# else
#  define LTDL_GLOBAL   0
# endif
#endif

/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LTDL_LAZY_OR_NOW
# ifdef RTLD_LAZY
#  define LTDL_LAZY_OR_NOW      RTLD_LAZY
# else
#  ifdef DL_LAZY
#   define LTDL_LAZY_OR_NOW     DL_LAZY
#  else
#   ifdef RTLD_NOW
#    define LTDL_LAZY_OR_NOW    RTLD_NOW
#   else
#    ifdef DL_NOW
#     define LTDL_LAZY_OR_NOW   DL_NOW
#    else
#     define LTDL_LAZY_OR_NOW   0
#    endif
#   endif
#  endif
# endif
#endif

fnord() { int i=42;}
main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
    if(ptr1 || ptr2) exit(0); } exit(1); } 

EOF
if { (eval echo $progname:2375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
  lt_cv_dlopen_self_static=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  lt_cv_dlopen_self_static=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
fi
    ;;
  esac

  case "$lt_cv_dlopen_self" in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case "$lt_cv_dlopen_self_static" in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi

# Copy echo and quote the copy, instead of the original, because it is
# used later.
ltecho="$echo"
if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
fi
LTSHELL="$SHELL"

LTCONFIG_VERSION="$VERSION"

# Only quote variables if we're using ltmain.sh.
case "$ltmain" in
*.sh)
  # Now quote all the things that may contain metacharacters.
  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
    old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
    reload_flag reload_cmds wl \
    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
    library_names_spec soname_spec \
    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
    hardcode_libdir_flag_spec hardcode_libdir_separator  \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do

    case "$var" in
    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  case "$ltecho" in
  *'\$0 --fallback-echo"')
    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
    ;;
  esac

  trap "$rm \"$ofile\"; exit 1" 1 2 15
  echo "creating $ofile"
  $rm "$ofile"
  cat <<EOF > "$ofile"
#! $SHELL

# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
#
# Copyright (C) 1996-1999 Free Software Foundation, Inc.
# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi

### BEGIN LIBTOOL CONFIG
EOF
  cfgfile="$ofile"
  ;;

*)
  # Double-quote the variables that need it (for aesthetics).
  for var in old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
    old_LN_S old_DLLTOOL old_AS; do
    eval "$var=\\\"\$var\\\""
  done

  # Just create a config file.
  cfgfile="$ofile.cfg"
  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
  echo "creating $cfgfile"
  $rm "$cfgfile"
  cat <<EOF > "$cfgfile"
# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
EOF
  ;;
esac

cat <<EOF >> "$cfgfile"
# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
# LD=$old_LD NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\
#   $0$ltconfig_args
#
# Compiler and other test output produced by $progname, useful for
# debugging $progname, is in ./config.log if it exists.

# The version of $progname that generated this script.
LTCONFIG_VERSION=$LTCONFIG_VERSION

# Shell to use when invoking shell scripts.
SHELL=$LTSHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host

# An echo program that does not interpret backslashes.
echo=$ltecho

# The archiver.
AR=$AR

# The default C compiler.
CC=$CC

# The linker used to build libraries.
LD=$LD

# Whether we need hard or soft links.
LN_S=$LN_S

# A BSD-compatible nm program.
NM=$NM

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$reload_flag
reload_cmds=$reload_cmds

# How to pass a linker flag through the compiler.
wl=$wl

# Object file suffix (normally "o").
objext="$objext"

# Old archive suffix (normally "a").
libext="$libext"

# Additional compiler flags for building library objects.
pic_flag=$pic_flag

# Does compiler simultaneously support -c and -o options
compiler_c_o=$compiler_c_o

# Can we write directly to a .lo ?
compiler_o_lo=$compiler_o_lo

# Must we lock files when doing compilation ?
need_locks=$need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$link_static_flag

# Compiler flag to turn off builtin functions.
no_builtin_flag=$no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$RANLIB
old_archive_cmds=$old_archive_cmds
old_postinstall_cmds=$old_postinstall_cmds
old_postuninstall_cmds=$old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$old_archive_from_new_cmds

# Commands used to build and install a shared archive.
archive_cmds=$archive_cmds
archive_expsym_cmds=$archive_expsym_cmds
postinstall_cmds=$postinstall_cmds
postuninstall_cmds=$postuninstall_cmds

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$deplibs_check_method

# Command to use when deplibs_check_method == file_magic
file_magic_cmd=$file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$global_symbol_to_cdecl

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$hardcode_libdir_separator

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Compile-time system search path for libraries
sys_lib_search_path_spec=$sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"

# Set to yes if exported symbols are required
always_export_symbols=$always_export_symbols

# The command to extract exported symbols
export_symbols_cmds=$export_symbols_cmds

# Symbols that should not be listed in the preloaded symbols
exclude_expsyms=$exclude_expsyms

# Symbols that must always be exported
include_expsyms=$include_expsyms

EOF

case "$ltmain" in
*.sh)
  echo '### END LIBTOOL CONFIG' >> "$ofile"
  echo >> "$ofile"
  case "$host_os" in
  aix3*)
    cat <<\EOF >> "$ofile"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "${COLLECT_NAMES+set}" != set; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;
  esac

  # Append the ltmain.sh script.
  cat "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)

  chmod +x "$ofile"
  ;;

*)
  # Compile the libtool program.
  echo "FIXME: would compile $ltmain"
  ;;
esac

test -n "$cache_file" || exit 0

# AC_CACHE_SAVE
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

exit 0

# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.