OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [examples/] [simple-alarm.c] - Rev 597

Go to most recent revision | Compare with Previous | Blame | View Log

/* this is a very simple program meant to demonstrate
   a basic use of time, alarms and alarm-handling functions
   in eCos */
 
#include <cyg/kernel/kapi.h>
 
#include <stdio.h>
 
#define NTHREADS 1
#define STACKSIZE 4096
 
static cyg_handle_t thread[NTHREADS];
 
static cyg_thread thread_obj[NTHREADS];
static char stack[NTHREADS][STACKSIZE];
 
static void alarm_prog( cyg_addrword_t data );
 
/* we install our own startup routine which sets up
    threads and starts the scheduler */
void cyg_user_start(void)
{
  cyg_thread_create(4, alarm_prog, (cyg_addrword_t) 0,
		    "alarm_thread", (void *) stack[0],
		    STACKSIZE, &thread[0], &thread_obj[0]);
  cyg_thread_resume(thread[0]);
}
 
/* we need to declare the alarm handling function (which is
   defined below), so that we can pass it to
   cyg_alarm_initialize() */
cyg_alarm_t test_alarm_func;
 
/* alarm_prog() is a thread which sets up an alarm which is then
   handled by test_alarm_func() */
static void alarm_prog(cyg_addrword_t data)
{
  cyg_handle_t test_counterH, system_clockH, test_alarmH;
  cyg_tick_count_t ticks;
  cyg_alarm test_alarm;
  unsigned how_many_alarms = 0, prev_alarms = 0, tmp_how_many;
 
  system_clockH = cyg_real_time_clock();
  cyg_clock_to_counter(system_clockH, &test_counterH);
  cyg_alarm_create(test_counterH, test_alarm_func,
		   (cyg_addrword_t) &how_many_alarms,
		   &test_alarmH, &test_alarm);
  cyg_alarm_initialize(test_alarmH, cyg_current_time()+200, 200);
 
  /* get in a loop in which we read the current time and
     print it out, just to have something scrolling by */
  for (;;) {
    ticks = cyg_current_time();
    printf("Time is %llu\n", ticks);
    /* note that we must lock access to how_many_alarms, since the
       alarm handler might change it.  this involves using the
       annoying temporary variable tmp_how_many so that I can keep the
       critical region short */
    cyg_scheduler_lock();
    tmp_how_many = how_many_alarms;
    cyg_scheduler_unlock();
    if (prev_alarms != tmp_how_many) {
      printf("  ---> alarm calls so far: %u\n", tmp_how_many);
      prev_alarms = tmp_how_many;
    }
    cyg_thread_delay(30);
  }
}
 
/* test_alarm_func() is invoked as an alarm handler, so
   it should be quick and simple.  in this case it increments
   the data that is passed to it. */
void test_alarm_func(cyg_handle_t alarmH, cyg_addrword_t data)
{
  ++*((unsigned *) data);
}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.