URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [devs/] [eth/] [cf/] [v2_0/] [ChangeLog] - Rev 174
Compare with Previous | Blame | View Log
2002-11-04 Gary Thomas <gthomas@ecoscentric.com>
* src/if_sc_lpe.c (do_delay): Fix problem with overloaded name 'ticks'.
n.b. the FreeBSD stack has this defined for it's own use.
2002-06-14 Gary Thomas <gary@chez-thomas.org>
* src/if_sc_lpe.c:
Need to include <pkgconf/io_eth_drivers.h> for proper configuration
of stand-alone (polled) vs. system (interrupt driven) mode.
2002-05-30 Jonathan Larmour <jlarmour@redhat.com>
* src/if_sc_lpe.c: Conditionalize use of thread on CYGPKG_KERNEL
not CYGPKG_NET.
2002-04-12 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Clean up warnings.
2001-10-16 Jesper Skov <jskov@redhat.com>
* include/devs_eth_cf.inl: Added buffer parameters.
2001-08-25 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c (sc_lpe_card_handler): Rework ESA discovery code.
2001-08-22 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c:
printf() is no longer a part of RedBoot. Thus all programs
must use diag_printf() and related functions instead.
2001-06-16 Jesper Skov <jskov@redhat.com>
* src/if_sc_lpe.c: Use generic DP83902A driver, only redefining
the init function to handle card details (which incidently do not
appear to be fully working).
* include/devs_eth_cf.inl: Device details moved here so the
generic driver can access them.
* cdl/cf_eth_drivers.cdl: Changes to use generic driver. Allow ESA
to be configured.
Require DP83902A package.
* src/dp8390.h: Deleted.
2001-04-13 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c (sc_lpe_card_handler): Work around broken card(s)
which do not have valid ESA in config EPROM.
2000-09-15 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Suppress noisy message which seems to sometimes
happen if the card is re-initialized from warm.
2000-09-14 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Better recovery for bad devices [stand-alone].
2000-09-13 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Fix handling of receive buffer overflow,
i.e. missed data. [quietly ignored]
* src/dp8390.h: Update layout of Tx/Rx buffers.
2000-09-12 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c (sc_lpe_card_handler): Handle case when card
is warm (powered up from boot ROM).
2000-09-01 Hugo Tyson <hmt@cygnus.co.uk>
* src/if_sc_lpe.c (sc_lpe_init): Work with new fast net
thread to do all the copying work instead of loading up DSR time.
In detail:
o New "deliver" function in the interface record. It's the same
function as the poll entry; sc_lpe_int().
o In registering the interrupt handler, use eth_drv_dsr (from the
logical driver) instead of sc_lpe_int.
2000-08-29 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c (sc_lpe_recv): Better handling if upper layer
had no buffers [this routine called anyway].
2000-08-28 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Better handling of "hot" cards (i.e. one
initialized by a debug environment).
2000-08-23 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Add new function to return interrupt vector
used by interface. Also, handle interrupts from interface even
if there is no kernel (CF callback).
2000-08-03 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Ensure DSR locked while initializing hardware.
* cdl/cf_eth_drivers.cdl: Ethernet driver package hierarchy changed.
2000-07-26 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: Update for new eth_drv interfaces (via *sc).
2000-07-18 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c (sc_lpe_RxEvent): Handle case where chip gets lost
and keeps returning the same input packet (hardware bug?).
2000-07-16 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c (sc_lpe_card_handler): Add initialization message and
timeout when running stand-alone.
2000-07-15 Gary Thomas <gthomas@redhat.com>
* src/if_sc_lpe.c: CF interrupts are now handled by the slot handler,
not directly in this code.
2000-07-14 Gary Thomas <gthomas@redhat.com>
* cdl/cf_eth_drivers.cdl:
* src/if_sc_lpe.c: Support building in eCos and stand-alone modes.
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================