URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [devs/] [eth/] [intel/] [i82544/] [v2_0/] [cdl/] [intel_i82544_eth_drivers.cdl] - Rev 174
Compare with Previous | Blame | View Log
# ====================================================================
#
# intel_i82544_eth_drivers.cdl
#
# Intel 82544 ethernet driver
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): nickg, from i82559 original
# Original data: hmt
# Contributors: hmt, gthomas, jskov
# Date: 2001-10-25
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_DEVS_ETH_INTEL_I82544 {
display "Intel 82544 ethernet driver"
description "Ethernet driver for Intel 82544 Gigabit controller."
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGINT_DEVS_ETH_INTEL_I82544_REQUIRED
include_dir cyg/devs/eth
# SNMP demands to know stuff; this sadly makes us break the neat
# abstraction of the device having nothing exported.
include_files include/i82544_info.h
# and tell them that it is available
define_proc {
puts $::cdl_system_header \
"#define CYGBLD_DEVS_ETH_DEVICE_H <pkgconf/devs_eth_intel_i82544.h>"
puts $::cdl_header "#include CYGDAT_DEVS_ETH_INTEL_I82544_CFG";
}
compile -library=libextras.a if_i82544.c
cdl_option CYGDBG_DEVS_ETH_INTEL_I82544_CHATTER {
display "Prints ethernet device status info during startup"
default_value 0
description "
The ethernet device initialization code can print lots of info
to confirm that it has found the devices on the PCI bus, read
the MAC address from EEPROM correctly, and so on, and also
displays the mode (10/100MHz, half/full duplex) of the
connection."
}
cdl_option CYGNUM_DEVS_ETH_INTEL_I82544_DEV_COUNT {
display "Number of supported interfaces."
calculated { CYGINT_DEVS_ETH_INTEL_I82544_REQUIRED }
flavor data
description "
This option selects the number of PCI ethernet interfaces to
be supported by the driver."
}
cdl_component CYGDBG_DEVS_ETH_INTEL_I82544_KEEP_STATISTICS {
display "Keep Ethernet statistics"
default_value 0
description "
The ethernet device can maintain statistics about the network,
specifically a great variety of error rates which are useful
for network management. SNMP for example uses this
information. There is some performance cost in maintaining
this information; disable this option to recoup that."
cdl_option CYGDBG_DEVS_ETH_INTEL_I82544_KEEP_82544_STATISTICS {
display "Keep i82544 Internal statistics"
default_value 1
description "
The i82544 keeps internal counters, and it is possible to
acquire these. But the i82544 (reputedly) does not service
the network whilst uploading the data to RAM from its
internal registers. If throughput is a problem, disable
this option to acquire only those statistics gathered by
software, so that the i82544 never sleeps."
}
}
cdl_component CYGPKG_DEVS_ETH_INTEL_I82544_WRITE_EEPROM {
display "SIOCSIFHWADDR records MAC address in EEPROM"
default_value 0
description "
The ioctl() socket call with operand SIOCSIFHWADDR sets the
interface hardware address - the MAC address or ethernet
address. This option causes the new MAC address to be written
into the EEPROM associated with the interface, so that the new
MAC address is permanently recorded. Doing this should be a
carefully chosen decision, hence this option."
}
cdl_option CYGNUM_DEVS_ETH_INTEL_I82544_MAX_RX_DESCRIPTORS {
display "Maximum number of RX descriptors"
flavor data
default_value { CYGPKG_REDBOOT ? 8 : 128 }
define MAX_RX_DESCRIPTORS
description "
An RX descriptor is used for each ethernet frame required
to be passed to the upper networking layers. This option
sets the maximum number of these. Higher numbers use more
memory, lower numbers will reduce performance. The system
appears to work OK with as few as 8 descriptors but limps
painfully with only 4. Performance is better with more than
8, but assuming the size of non-cached (so useless for anything
else) memory window is 1Mb, we might as well use it all.
128 RX and TX descriptors uses the whole 1Mb, near enough."
}
cdl_option CYGNUM_DEVS_ETH_INTEL_I82544_MAX_TX_DESCRIPTORS {
display "Maximum number of TX descriptors"
flavor data
default_value { CYGPKG_REDBOOT ? 8 : 128 }
define MAX_TX_DESCRIPTORS
description "
A TX descriptor is used for each ethernet frame passed down
from upper networking layers for transmission. This option
sets the maximum number of these. Higher numbers use more
memory, lower numbers will reduce performance. The system
appears to work OK with as few as 8 descriptors but limps
painfully with only 4. Performance is better with more than
8, but assuming the size of non-cached (so useless for anything
else) memory window is 1Mb, we might as well use it all.
128 RX and TX descriptors uses the whole 1Mb, near enough."
}
cdl_component CYGPKG_DEVS_ETH_INTEL_I82544_OPTIONS {
display "Intel 82544 ethernet driver build options"
flavor none
no_define
cdl_option CYGPKG_DEVS_ETH_INTEL_I82544_CFLAGS_ADD {
display "Additional compiler flags"
flavor data
no_define
default_value { "-D_KERNEL -D__ECOS" }
description "
This option modifies the set of compiler flags for
building the Intel 82544 ethernet driver
package. These flags are used in addition to the set of
global flags."
}
}
}
# EOF intel_i82544_eth_drivers.cdl