URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [devs/] [eth/] [via/] [rhine/] [v2_0/] [src/] [if_rhine.c] - Rev 510
Go to most recent revision | Compare with Previous | Blame | View Log
//========================================================================== // // dev/if_rhine.c // // Ethernet device driver for VIA RHINE compatible controllers // //========================================================================== //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //####BSDCOPYRIGHTBEGIN#### // // ------------------------------------------- // // Portions of this software may have been derived from OpenBSD or other sources, // and are covered by the appropriate copyright disclaimers included herein. // // ------------------------------------------- // //####BSDCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): jskov, based on pcnet driver // Contributors: gthomas, jskov, hmt // Date: 2001-05-30 // Purpose: // Description: hardware driver for VIA Rhine ethernet // // FIXME: Make endian safe // Make use of virtual addressing for memory shared over PCI // (see _ADDR_MASK). // Link failure not detected for some reason. // //####DESCRIPTIONEND#### // //========================================================================== #include <pkgconf/system.h> #include <pkgconf/devs_eth_via_rhine.h> #include <pkgconf/io_eth_drivers.h> #include <cyg/infra/cyg_type.h> #include <cyg/hal/hal_arch.h> #include <cyg/hal/hal_intr.h> #include <cyg/infra/cyg_ass.h> #include <cyg/infra/diag.h> #include <cyg/hal/drv_api.h> #include <cyg/io/eth/netdev.h> #include <cyg/io/eth/eth_drv.h> #ifdef CYGPKG_NET #include <pkgconf/net.h> #include <cyg/kernel/kapi.h> #include <net/if.h> /* Needed for struct ifnet */ #include <pkgconf/io_eth_drivers.h> #endif #include CYGHWR_MEMORY_LAYOUT_H #ifdef CYGPKG_IO_PCI #include <cyg/io/pci.h> #else #error "Need PCI package here" #endif #define _BUF_SIZE 1544 #ifdef CYGPKG_INFRA_DEBUG // Then we log, OOI, the number of times we get a bad packet number // from the tx done fifo. int rhine_txfifo_good = 0; int rhine_txfifo_bad = 0; #endif #include "via_rhine.h" #define __WANT_DEVS #include CYGDAT_DEVS_ETH_VIA_RHINE_INL #undef __WANT_DEVS static void rhine_poll(struct eth_drv_sc *sc); // This ISR is called when the ethernet interrupt occurs static cyg_uint32 rhine_isr(cyg_vector_t vector, cyg_addrword_t data) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)data; DEBUG_FUNCTION(); INCR_STAT( interrupts ); cyg_drv_interrupt_mask(cpd->interrupt); cyg_drv_interrupt_acknowledge(cpd->interrupt); return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR } static void rhine_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data) { // This conditioning out is necessary because of explicit calls to this // DSR - which would not ever be called in the case of a polled mode // usage ie. in RedBoot. #ifdef CYGPKG_IO_ETH_DRIVERS_NET struct rhine_priv_data* cpd = (struct rhine_priv_data *)data; struct cyg_netdevtab_entry *ndp = (struct cyg_netdevtab_entry *)(cpd->ndp); struct eth_drv_sc *sc = (struct eth_drv_sc *)(ndp->device_instance); // but here, it must be a *sc: eth_drv_dsr( vector, count, (cyg_addrword_t)sc ); #else # ifndef CYGPKG_REDBOOT # error Empty Rhine ethernet DSR is compiled. Is this what you want? # endif #endif } // The deliver function (ex-DSR) handles the ethernet [logical] processing static void rhine_deliver(struct eth_drv_sc *sc) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; DEBUG_FUNCTION(); // Service the interrupt: rhine_poll(sc); // Allow interrupts to happen again cyg_drv_interrupt_unmask(cpd->interrupt); } static int rhine_int_vector(struct eth_drv_sc *sc) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; return (cpd->interrupt); } // ------------------------------------------------------------------------ // Physical interface #if 0 // fix warning since this isn't actually used static void rhine_write_MII(struct rhine_priv_data *cpd, int id, int reg, cyg_uint16 value) { cyg_uint8 stat; int i = 1000; // Wait for a previous access to complete (within reason) do { HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_MIICR, stat); } while ((stat & (RHINE_MIICR_RCMD | RHINE_MIICR_WCMD)) && i-- > 0); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_MIICR, 0); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_PHYADR, id); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_MIIAD, reg); HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_MIIDATA, value); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_MIICR, RHINE_MIICR_WCMD); } #endif static int rhine_read_MII(struct rhine_priv_data *cpd, int id, int reg) { int i = 1000; cyg_uint8 stat; cyg_uint16 val; // Wait for a previous access to complete (within reason) do { HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_MIICR, stat); } while ((stat & (RHINE_MIICR_RCMD | RHINE_MIICR_WCMD)) && i-- > 0); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_MIICR, 0); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_PHYADR, id); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_MIIAD, reg); HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_MIICR, RHINE_MIICR_RCMD); i = 1000; do { HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_MIICR, stat); } while ((stat & RHINE_MIICR_RCMD) && i-- > 0); HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_MIIDATA, val); return val; } // ------------------------------------------------------------------------ // Memory management // // Simply carve off from the front of the PCI mapped window into real memory static cyg_uint32 rhine_heap_size; static cyg_uint8 *rhine_heap_base; static cyg_uint8 *rhine_heap_free; static void* pciwindow_mem_alloc(int size) { void *p_memory; int _size = size; CYG_ASSERT( (CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE <= (int)rhine_heap_free) && ((CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE + CYGHWR_VIA_RHINE_PCI_MEM_MAP_SIZE) > (int)rhine_heap_free) && (0 < rhine_heap_size) && (CYGHWR_VIA_RHINE_PCI_MEM_MAP_SIZE >= rhine_heap_size) && (CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE == (int)rhine_heap_base), "Heap variables corrupted" ); p_memory = (void *)0; size = (size + 3) & ~3; if ( (rhine_heap_free+size) < (rhine_heap_base+rhine_heap_size) ) { cyg_uint32 *p; p_memory = (void *)rhine_heap_free; rhine_heap_free += size; for ( p = (cyg_uint32 *)p_memory; _size > 0; _size -= 4 ) *p++ = 0; } #if DEBUG & 9 diag_printf("Allocated %d bytes at %08x\n", size, p_memory); #endif return p_memory; } static cyg_pci_match_func find_rhine_match_func; static cyg_bool find_rhine_match_func( cyg_uint16 v, cyg_uint16 d, cyg_uint32 c, void *p ) { #if DEBUG & 9 diag_printf("PCI match vendor %04x device %04x\n", v, d); #endif return (0x1106 == v) && // vendor: VIA ((0x3065 == d) || // device: DL10030A (0x3043 == d)); // device: VT86C100A } static int pci_init_find_rhines( void ) { cyg_pci_device_id devid; cyg_pci_device dev_info; cyg_uint16 cmd; int device_index; int found_devices = 0; DEBUG_FUNCTION(); #ifdef CYGARC_UNCACHED_ADDRESS CYG_ASSERT( CYGARC_UNCACHED_ADDRESS((CYG_ADDRWORD)CYGMEM_SECTION_pci_window) == CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE, "PCI window configured does not match PCI memory section base" ); #else CYG_ASSERT( (CYG_ADDRWORD)CYGMEM_SECTION_pci_window == CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE, "PCI window configured does not match PCI memory section base" ); #endif CYG_ASSERT( CYGMEM_SECTION_pci_window_SIZE == CYGHWR_VIA_RHINE_PCI_MEM_MAP_SIZE, "PCI window configured does not match PCI memory section size" ); if ( #ifdef CYGARC_UNCACHED_ADDRESS CYGARC_UNCACHED_ADDRESS((CYG_ADDRWORD)CYGMEM_SECTION_pci_window) != #else (CYG_ADDRWORD)CYGMEM_SECTION_pci_window != #endif CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE || CYGMEM_SECTION_pci_window_SIZE != CYGHWR_VIA_RHINE_PCI_MEM_MAP_SIZE ) { #if DEBUG & 8 diag_printf("pci_init_find_rhines(): PCI window misconfigured\n"); #endif return 0; } // First initialize the heap in PCI window'd memory rhine_heap_size = CYGHWR_VIA_RHINE_PCI_MEM_MAP_SIZE; rhine_heap_base = (cyg_uint8 *)CYGHWR_VIA_RHINE_PCI_MEM_MAP_BASE; rhine_heap_free = rhine_heap_base; cyg_pci_init(); #if DEBUG & 8 diag_printf("Finished cyg_pci_init();\n"); #endif devid = CYG_PCI_NULL_DEVID; for (device_index = 0; device_index < CYGNUM_DEVS_ETH_VIA_RHINE_DEV_COUNT; device_index++) { struct rhine_priv_data* cpd = rhine_priv_array[device_index]; cpd->index = device_index; // See above for find_rhine_match_func - it selects any of several // variants. This is necessary in case we have multiple mixed-type // devices on one board in arbitrary orders. if (cyg_pci_find_matching( &find_rhine_match_func, NULL, &devid )) { #if DEBUG & 8 diag_printf("eth%d = rhine\n", device_index); #endif cyg_pci_get_device_info(devid, &dev_info); cpd->interrupt_handle = 0; // Flag not attached. if (cyg_pci_translate_interrupt(&dev_info, &cpd->interrupt)) { #if DEBUG & 8 diag_printf(" Wired to HAL vector %d\n", cpd->interrupt); #endif cyg_drv_interrupt_create( cpd->interrupt, 1, // Priority - unused (cyg_addrword_t)cpd,// Data item passed to ISR & DSR rhine_isr, // ISR rhine_dsr, // DSR &cpd->interrupt_handle, // handle to intr obj &cpd->interrupt_object ); // space for int obj cyg_drv_interrupt_attach(cpd->interrupt_handle); // Don't unmask the interrupt yet, that could get us into a // race. } else { cpd->interrupt = 0; #if DEBUG & 8 diag_printf(" Does not generate interrupts.\n"); #endif } if (cyg_pci_configure_device(&dev_info)) { #if DEBUG & 8 int i; diag_printf("Found device on bus %d, devfn 0x%02x:\n", CYG_PCI_DEV_GET_BUS(devid), CYG_PCI_DEV_GET_DEVFN(devid)); if (dev_info.command & CYG_PCI_CFG_COMMAND_ACTIVE) { diag_printf(" Note that board is active. Probed" " sizes and CPU addresses invalid!\n"); } diag_printf(" Vendor 0x%04x", dev_info.vendor); diag_printf("\n Device 0x%04x", dev_info.device); diag_printf("\n Command 0x%04x, Status 0x%04x\n", dev_info.command, dev_info.status); diag_printf(" Class/Rev 0x%08x", dev_info.class_rev); diag_printf("\n Header 0x%02x\n", dev_info.header_type); diag_printf(" SubVendor 0x%04x, Sub ID 0x%04x\n", dev_info.header.normal.sub_vendor, dev_info.header.normal.sub_id); for(i = 0; i < CYG_PCI_MAX_BAR; i++) { diag_printf(" BAR[%d] 0x%08x /", i, dev_info.base_address[i]); diag_printf(" probed size 0x%08x / CPU addr 0x%08x\n", dev_info.base_size[i], dev_info.base_map[i]); } diag_printf(" eth%d configured\n", device_index); #endif found_devices++; cpd->found = 1; cpd->active = 0; cpd->devid = devid; cpd->base = (unsigned char*) dev_info.base_map[0]; #if DEBUG & 8 diag_printf(" I/O address = 0x%08x\n", cpd->base); #endif // Don't use cyg_pci_set_device_info since it clears // some of the fields we want to print out below. cyg_pci_read_config_uint16(dev_info.devid, CYG_PCI_CFG_COMMAND, &cmd); cmd |= (CYG_PCI_CFG_COMMAND_IO // enable I/O space | CYG_PCI_CFG_COMMAND_MEMORY // enable memory space | CYG_PCI_CFG_COMMAND_MASTER); // enable bus master cyg_pci_write_config_uint16(dev_info.devid, CYG_PCI_CFG_COMMAND, cmd); // Extra init code needed for D-Link controller. This // is snuffed from the Linux driver and was provided // by D-Link. I've been unable to find documentation // for the part. if (0x3065 == dev_info.device) { cyg_uint8 tmp; #if DEBUG & 8 diag_printf("Pre-reset init code for D-Link.\n"); #endif HAL_PCI_IO_READ_UINT8(cpd->base+RHINE_STICKYHW, tmp); tmp &= 0xfc; HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_STICKYHW, tmp); HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_WOL_CG_CLR, 0x80); HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_WOL_CR_CLR, 0xff); HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_PWR_CSR_CLR, 0xff); } // Now the PCI part of the device is configured, reset // it. This should make it safe to enable the // interrupt HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_CR1, RHINE_CR1_SRST); // Reload ESA from EEPROM { cyg_uint8 tmp; int i; #if DEBUG & 8 diag_printf("Reload ESA from EEPROM..."); #endif HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_EECSR, 0x20); for (i = 0; i < 150; i++) { HAL_PCI_IO_READ_UINT8(cpd->base+RHINE_EECSR, tmp); if (!(tmp & 0x20)) { break; } } #if DEBUG & 8 if (tmp & 0x20) diag_printf("Timed out\n"); else diag_printf("Done\n"); #endif } // This is the indicator for "uses an interrupt" if (cpd->interrupt_handle != 0) { cyg_drv_interrupt_acknowledge(cpd->interrupt); cyg_drv_interrupt_unmask(cpd->interrupt); #if DEBUG & 8 diag_printf(" Enabled interrupt %d\n", cpd->interrupt); #endif } #if DEBUG & 8 diag_printf(" **** Device enabled for I/O and Memory " "and Bus Master\n"); #endif } else { cpd->found = 0; cpd->active = 0; #if DEBUG & 8 diag_printf("Failed to configure device %d\n", device_index); #endif } } else { cpd->found = 0; cpd->active = 0; #if DEBUG & 8 diag_printf("eth%d not found\n", device_index); #endif } } if (0 == found_devices) return 0; return 1; } static bool via_rhine_init(struct cyg_netdevtab_entry *tab) { static int initialized = 0; // only probe PCI et al *once* struct eth_drv_sc *sc = (struct eth_drv_sc *)tab->device_instance; struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; cyg_uint8 *d, *p, *p_next; int i; cyg_addrword_t ba; DEBUG_FUNCTION(); if ( 0 == initialized++ ) { // then this is the first time ever: if ( ! pci_init_find_rhines() ) { #if DEBUG & 8 diag_printf( "pci_init_find_rhines failed" ); #endif return false; } } // If this device is not present, exit if (0 == cpd->found) return 0; #if DEBUG & 8 diag_printf( "Rhine device SC %08x CPD %08x\n", sc, cpd); #endif // Look for physical MII device for (i = 0; i < 32; i++) { cyg_uint16 mii_status = rhine_read_MII(cpd, i, MII_BMSR); if (mii_status != 0x0000 && mii_status != 0xffff) { cpd->phys_id = i; #if DEBUG & 8 diag_printf("Found MII interface at id %d, status %04x, adv 0x%04x, link 0x%04x\n", cpd->phys_id, mii_status, rhine_read_MII(cpd,i,4), rhine_read_MII(cpd,i,5)); #endif break; } } #if DEBUG & 8 if (i == 32) diag_printf("No MII interface found!"); #endif // Prepare ESA if (cpd->hardwired_esa) { // Force the NIC to use the specified ESA p = cpd->base + RHINE_PAR0; for (i = 0; i < 6; i++) *p++ = cpd->esa[i]; } else { // Use the address from the serial EEPROM p = cpd->base + RHINE_PAR0; for (i = 0; i < 6; i++) cpd->esa[i] = *p++; } #if DEBUG & 8 diag_printf("RHINE - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n", (cpd->hardwired_esa) ? "static" : "eeprom", cpd->esa[0], cpd->esa[1], cpd->esa[2], cpd->esa[3], cpd->esa[4], cpd->esa[5] ); #endif // Prepare RX and TX rings p = cpd->rx_ring = (cyg_uint8*) CYGARC_UNCACHED_ADDRESS(pciwindow_mem_alloc((1<<cpd->rx_ring_log_cnt)*RHINE_RD_SIZE)); d = cpd->rx_buffers = (cyg_uint8*) CYGARC_UNCACHED_ADDRESS(pciwindow_mem_alloc(_BUF_SIZE*cpd->rx_ring_cnt)); for (i = 0; i < cpd->rx_ring_cnt; i++) { p_next = p + RHINE_RD_SIZE; HAL_PCI_CPU_TO_BUS((cyg_uint32)d, ba); _SU32(p, RHINE_RDES2) = ba; _SU32(p, RHINE_RDES1) = _BUF_SIZE; HAL_PCI_CPU_TO_BUS((cyg_uint32)p_next, ba); _SU32(p, RHINE_RDES3) = ba; _SU32(p, RHINE_RDES0) = RHINE_RDES0_OWN; #if DEBUG & 8 diag_printf("Set RDES at 0x%08lx to 0x%08x 0x%08x 0x%08x 0x%08x\n", (unsigned long)p, _SU32(p, RHINE_RDES0), _SU32(p, RHINE_RDES1), _SU32(p, RHINE_RDES2), _SU32(p, RHINE_RDES3)); #endif p = p_next; d += _BUF_SIZE; } // last entry wraps to the first p -= RHINE_RD_SIZE; HAL_PCI_CPU_TO_BUS((cyg_uint32)cpd->rx_ring, ba); _SU32(p, RHINE_RDES3) = ba; #if DEBUG & 8 diag_printf("Set RDES at 0x%08lx to 0x%08x 0x%08x 0x%08x 0x%08x\n", (unsigned long)p, _SU32(p, RHINE_RDES0), _SU32(p, RHINE_RDES1), _SU32(p, RHINE_RDES2), _SU32(p, RHINE_RDES3)); #endif cpd->rx_ring_next = 0; // CPU to PCI space translation HAL_PCI_CPU_TO_BUS((cyg_uint32)cpd->rx_ring, ba); HAL_PCI_IO_WRITE_UINT32(cpd->base + RHINE_CUR_RX, ba); p = cpd->tx_ring = (cyg_uint8*) CYGARC_UNCACHED_ADDRESS(pciwindow_mem_alloc((1<<cpd->tx_ring_log_cnt)*RHINE_TD_SIZE)); d = cpd->tx_buffers = (cyg_uint8*) CYGARC_UNCACHED_ADDRESS(pciwindow_mem_alloc(_BUF_SIZE*cpd->tx_ring_cnt)); for (i = 0; i < cpd->tx_ring_cnt; i++) { _SU32(p, RHINE_TDES0) = 0; _SU32(p, RHINE_TDES1) = (RHINE_TDES1_IC|RHINE_TDES1_EDP|RHINE_TDES1_STP|RHINE_TDES1_C); HAL_PCI_CPU_TO_BUS((cyg_uint32)d, ba); _SU32(p, RHINE_TDES2) = ba; HAL_PCI_CPU_TO_BUS((cyg_uint32)(p + RHINE_TD_SIZE), ba); _SU32(p, RHINE_TDES3) = ba; #if DEBUG & 8 diag_printf("Set TDES at 0x%08lx to 0x%08x 0x%08x 0x%08x 0x%08x\n", (unsigned long)p, _SU32(p, RHINE_TDES0), _SU32(p, RHINE_TDES1), _SU32(p, RHINE_TDES2), _SU32(p, RHINE_TDES3)); #endif p += RHINE_TD_SIZE; d += _BUF_SIZE; } // last entry wraps to the first p -= RHINE_TD_SIZE; HAL_PCI_CPU_TO_BUS((cyg_uint32)cpd->tx_ring, ba); _SU32(p, RHINE_TDES3) = ba; #if DEBUG & 8 diag_printf("Set TDES at 0x%08lx to 0x%08x 0x%08x 0x%08x 0x%08x\n", (unsigned long)p, _SU32(p, RHINE_TDES0), _SU32(p, RHINE_TDES1), _SU32(p, RHINE_TDES2), _SU32(p, RHINE_TDES3)); #endif cpd->tx_ring_free = cpd->tx_ring_alloc = cpd->tx_ring_owned = 0; HAL_PCI_CPU_TO_BUS((cyg_uint32)cpd->tx_ring, ba); HAL_PCI_IO_WRITE_UINT32(cpd->base + RHINE_CUR_TX, ba); cpd->txbusy = 0; #if DEBUG & 9 { cyg_uint8 tmp1, tmp2; HAL_PCI_IO_READ_UINT8(cpd->base+RHINE_CR0, tmp1); HAL_PCI_IO_READ_UINT8(cpd->base+RHINE_CR1, tmp2); diag_printf("CR0: %02x CR1: %02x\n", tmp1, tmp2); } #endif // and record the net dev pointer cpd->ndp = (void *)tab; // Initialize upper level driver (sc->funs->eth_drv->init)(sc, cpd->esa); #if DEBUG & 9 diag_printf("Done\n"); #endif return true; } static void rhine_stop(struct eth_drv_sc *sc) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; DEBUG_FUNCTION(); // Stop chip HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_CR0, RHINE_CR0_STOP); } // // This function is called to "start up" the interface. It may be called // multiple times, even when the hardware is already running. It will be // called whenever something "hardware oriented" changes and should leave // the hardware ready to send/receive packets. // static void rhine_start(struct eth_drv_sc *sc, unsigned char *esa, int flags) { #ifdef CYGPKG_NET struct ifnet *ifp = &sc->sc_arpcom.ac_if; #endif struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; DEBUG_FUNCTION(); // Disable device HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, RHINE_CR0_STOP); // Ack old interrupts HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_ISR, 0xffff); // Enable interrupts HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_IMR, RHINE_IMR_INIT); // Enable duplex HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_CR1, RHINE_CR1_DPOLL /* | RHINE_CR1_FDX*/); // Accept broadcast, multicast and small packets HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_RCR, RHINE_RCR_AB | RHINE_RCR_AM | RHINE_RCR_AR); // Tweak some magic (undocumented) parameters HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_BCR0, RHINE_BCR0_MAGIC_INIT); HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_BCR1, RHINE_BCR1_MAGIC_INIT); #if 1 // FIXME HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_TCR, 0x20); #endif #ifdef CYGPKG_NET if (( 0 #ifdef ETH_DRV_FLAGS_PROMISC_MODE != (flags & ETH_DRV_FLAGS_PROMISC_MODE) #endif ) || (ifp->if_flags & IFF_PROMISC) ) { // Then we select promiscuous mode. cyg_uint8 rcr; HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_RCR, rcr); rcr |= RHINE_RCR_PRO; HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_RCR, rcr); } #endif // Enable device HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, RHINE_CR0_STRT | RHINE_CR0_RXON | RHINE_CR0_TXON); } // // This routine is called to perform special "control" opertions // static int rhine_control(struct eth_drv_sc *sc, unsigned long key, void *data, int data_length) { cyg_uint8 *esa = (cyg_uint8 *)data; int i, res; cyg_uint8 reg, old_stat; struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; DEBUG_FUNCTION(); // Stop the controller while accessing (possibly altering) registers HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_CR0, old_stat); reg = old_stat; reg |= RHINE_CR0_STOP; reg &= ~RHINE_CR0_STRT; HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, reg); res = 0; // expect success switch (key) { case ETH_DRV_SET_MAC_ADDRESS: #if DEBUG & 9 diag_printf("RHINE - set ESA: %02x:%02x:%02x:%02x:%02x:%02x\n", esa[0], esa[1], esa[2], esa[3], esa[4], esa[5] ); #endif // DEBUG for ( i = 0; i < sizeof(cpd->esa); i++ ) { cpd->esa[i] = esa[i]; HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_PAR0 + i, esa[i]); } break; #ifdef ETH_DRV_GET_MAC_ADDRESS case ETH_DRV_GET_MAC_ADDRESS: // Extract the MAC address that is in the chip, and tell the // system about it. for (i = 0; i < sizeof(cpd->esa); i++) { HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_PAR0 + i, esa[i]); } break; #endif #ifdef ETH_DRV_GET_IF_STATS_UD case ETH_DRV_GET_IF_STATS_UD: // UD == UPDATE #endif // drop through #ifdef ETH_DRV_GET_IF_STATS case ETH_DRV_GET_IF_STATS: #endif #if defined(ETH_DRV_GET_IF_STATS) || defined (ETH_DRV_GET_IF_STATS_UD) { cyg_uint8 reg; struct ether_drv_stats *p = (struct ether_drv_stats *)data; // Chipset entry is no longer supported; RFC1573. for ( i = 0; i < SNMP_CHIPSET_LEN; i++ ) p->snmp_chipset[i] = 0; // This perhaps should be a config opt, so you can make up your own // description, or supply it from the instantiation. strcpy( p->description, "VIA Rhine" ); // CYG_ASSERT( 48 > strlen(p->description), "Description too long" ); HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_MIISR, reg); if (reg & RHINE_MIISR_LNKFL) { p->operational = 2; // LINK DOWN p->duplex = 1; // UNKNOWN p->speed = 0; } else { p->operational = 3; // LINK UP p->speed = (reg & RHINE_MIISR_SPEED) ? 10 * 1000000 : 100 * 1000000; HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_CR1, reg); if (reg & RHINE_CR1_FDX) p->duplex = 3; // 3 = DUPLEX else p->duplex = 2; // 2 = SIMPLEX } #ifdef KEEP_STATISTICS { struct via_rhine_stats *ps = &(cpd->stats); // Admit to it... p->supports_dot3 = true; p->tx_good = ps->tx_good ; p->tx_max_collisions = ps->tx_max_collisions ; p->tx_late_collisions = ps->tx_late_collisions ; p->tx_underrun = ps->tx_underrun ; p->tx_carrier_loss = ps->tx_carrier_loss ; p->tx_deferred = ps->tx_deferred ; p->tx_sqetesterrors = ps->tx_sqetesterrors ; p->tx_single_collisions = ps->tx_single_collisions; p->tx_mult_collisions = ps->tx_mult_collisions ; p->tx_total_collisions = ps->tx_total_collisions ; p->rx_good = ps->rx_good ; p->rx_crc_errors = ps->rx_crc_errors ; p->rx_align_errors = ps->rx_align_errors ; p->rx_resource_errors = ps->rx_resource_errors ; p->rx_overrun_errors = ps->rx_overrun_errors ; p->rx_collisions = ps->rx_collisions ; p->rx_short_frames = ps->rx_short_frames ; p->rx_too_long_frames = ps->rx_too_long_frames ; p->rx_symbol_errors = ps->rx_symbol_errors ; p->interrupts = ps->interrupts ; p->rx_count = ps->rx_count ; p->rx_deliver = ps->rx_deliver ; p->rx_resource = ps->rx_resource ; p->rx_restart = ps->rx_restart ; p->tx_count = ps->tx_count ; p->tx_complete = ps->tx_complete ; p->tx_dropped = ps->tx_dropped ; } #endif // KEEP_STATISTICS p->tx_queue_len = 1; break; } #endif default: res = 1; break; } // Restore controller state HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, old_stat); return res; } // // This routine is called to see if it is possible to send another packet. // It will return non-zero if a transmit is possible, zero otherwise. // static int rhine_can_send(struct eth_drv_sc *sc) { cyg_uint8 stat; struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; DEBUG_FUNCTION(); // This MII read forces the MIISR to get updated (void) rhine_read_MII(cpd, cpd->phys_id, MII_BMSR); HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_MIISR, stat); if (stat & RHINE_MIISR_LNKFL) { #if DEBUG & 1 diag_printf("*** Link failure\n"); #endif return false; // Link not connected } return (cpd->txbusy == 0); } // // This routine is called to send data to the hardware. static void rhine_send(struct eth_drv_sc *sc, struct eth_drv_sg *sg_list, int sg_len, int total_len, unsigned long key) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; int i, len, plen, ring_entry; cyg_uint8* sdata = NULL; cyg_uint8 *d, *buf, *txd; cyg_uint16 status; cyg_uint8 cr0; DEBUG_FUNCTION(); INCR_STAT( tx_count ); // Worry about the engine stopping. HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_CR0, status); if ( 0 == (RHINE_CR0_STRT & status) ) { #if DEBUG & 1 diag_printf("%s: ENGINE RESTART: status %04x\n", __FUNCTION__, status); #endif status &= ~RHINE_CR0_STOP; status |= RHINE_CR0_STRT; HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, status); } cpd->txbusy = 1; cpd->txkey = key; // Find packet length plen = 0; for (i = 0; i < sg_len; i++) plen += sg_list[i].len; CYG_ASSERT( plen == total_len, "sg data length mismatch" ); // Get next TX descriptor ring_entry = cpd->tx_ring_free; do { if (cpd->tx_ring_owned == cpd->tx_ring_cnt) { // Is this a dead end? Probably is. #if DEBUG & 1 diag_printf("%s: Allocation failed! Retrying...\n", __FUNCTION__ ); #endif continue; } cpd->tx_ring_free++; cpd->tx_ring_owned++; if (cpd->tx_ring_free == cpd->tx_ring_cnt) cpd->tx_ring_free = 0; } while (0); txd = cpd->tx_ring + ring_entry*RHINE_TD_SIZE; buf = cpd->tx_buffers + ring_entry*_BUF_SIZE; CYG_ASSERT(0 == (_SU32(txd, RHINE_TDES0) & RHINE_TDES0_OWN), "TX descriptor not free"); #if DEBUG & 4 diag_printf("##Tx descriptor index %d TDES %08x buffer %08x\n", ring_entry, txd, buf); #endif // Put data into buffer d = buf; for (i = 0; i < sg_len; i++) { sdata = (cyg_uint8 *)sg_list[i].buf; len = sg_list[i].len; CYG_ASSERT( sdata, "No sg data pointer here" ); while(len--) *d++ = *sdata++; } CYG_ASSERT( sdata, "No sg data pointer outside" ); // Annoyingly the chip doesn't pad to minimal packet size, so do // that by steam if (plen < 60) { plen = 60; #if DEBUG & 4 diag_printf("Padded %d bytes packet to 60 bytes\n", plen); #endif } CYG_ASSERT( (plen & RHINE_TDES1_TLNG_mask) == plen, "packet too long"); CYG_ASSERT( (plen & RHINE_TDES1_TLNG_mask) >= 60, "packet too short"); _SU32(txd, RHINE_TDES1) &= ~RHINE_TDES1_TLNG_mask; _SU32(txd, RHINE_TDES1) |= plen; _SU32(txd, RHINE_TDES0) = RHINE_TDES0_OWN; #if DEBUG & 1 // FIXME diag_printf("Before TX: Desc (@0x%08lx) %08x %08x %08x %08x\n Next (@0x%08lx) %08x %08x %08x %08x\n", (unsigned long) txd, _SU32(txd, RHINE_TDES0), _SU32(txd, RHINE_TDES1), _SU32(txd, RHINE_TDES2), _SU32(txd, RHINE_TDES3), ( (unsigned long)txd)+0x10, _SU32(txd, (0x10+RHINE_TDES0)), _SU32(txd, (0x10+RHINE_TDES1)), _SU32(txd,(0x10+ RHINE_TDES2)), _SU32(txd,(0x10+ RHINE_TDES3))); #endif // Ack TX empty int HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_ISR, RHINE_ISR_PTX); // Set transmit demand HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_CR0, cr0); cr0 |= RHINE_CR0_TDMD; HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, cr0); #if DEBUG & 1 HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_ISR, status); diag_printf("%s:END: ints at TX: %04x\n", __FUNCTION__, status); #endif } static void rhine_TxEvent(struct eth_drv_sc *sc, int stat) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; int success = 1; cyg_uint8 *txd; cyg_uint8 status; DEBUG_FUNCTION(); INCR_STAT( tx_complete ); txd = cpd->tx_ring + cpd->tx_ring_alloc*RHINE_TD_SIZE; #if DEBUG & 4 diag_printf("##Tx packet %d freed %08x %08x!\n", cpd->tx_ring_alloc, txd, _SU32(txd, RHINE_TDES0) ); #endif if ((_SU32(txd, RHINE_TDES0) & RHINE_TDES0_OWN)) { #if DEBUG & 1 diag_printf("%s: got TX completion when buffer is still owned\n", __FUNCTION__); #endif // first dirty ring entry not freed - wtf? } cpd->tx_ring_alloc++; if (cpd->tx_ring_alloc == cpd->tx_ring_cnt) cpd->tx_ring_alloc = 0; cpd->tx_ring_owned--; #ifdef KEEP_STATISTICS { cyg_uint32 reg = _SU32(txd, RHINE_TDES0); int collisions; // Covering each bit in turn... if ( reg & RHINE_TDES0_TXOK ) INCR_STAT( tx_good ); if ( reg & RHINE_TDES0_CRS ) INCR_STAT( tx_carrier_loss ); if ( reg & RHINE_TDES0_OWC ) INCR_STAT( tx_late_collisions ); if ( reg & RHINE_TDES0_ABT ) INCR_STAT( tx_max_collisions ); if ( reg & RHINE_TDES0_DFR ) INCR_STAT( tx_deferred ); collisions = ((reg & RHINE_TDES0_NCR_mask) >> RHINE_TDES0_NCR_shift); if (1 == collisions) INCR_STAT( tx_single_collisions ); else if (1 < collisions) INCR_STAT( tx_mult_collisions ); cpd->stats.tx_total_collisions = cpd->stats.tx_late_collisions + cpd->stats.tx_max_collisions + cpd->stats.tx_mult_collisions + cpd->stats.tx_single_collisions; } #endif // KEEP_STATISTICS // We do not really care about Tx failure. Ethernet is not a reliable // medium. But we do care about the TX engine stopping. HAL_PCI_IO_READ_UINT8(cpd->base + RHINE_CR0, status); if ( 0 == (RHINE_CR0_STRT & status) ) { #if DEBUG & 1 diag_printf("%s: ENGINE RESTART: status %04x\n", __FUNCTION__, status); #endif status &= ~RHINE_CR0_STOP; status |= RHINE_CR0_STRT; HAL_PCI_IO_WRITE_UINT8(cpd->base + RHINE_CR0, status); success = 0; // And treat this as an error... } if ( cpd->txbusy ) { cpd->txbusy = 0; (sc->funs->eth_drv->tx_done)(sc, cpd->txkey, success); } // Ack TX interrupt set HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_ISR, RHINE_ISR_PTX); } // // This function is called when a packet has been received. Its job is // to prepare to unload the packet from the hardware. Once the length of // the packet is known, the upper layer of the driver can be told. When // the upper layer is ready to unload the packet, the internal function // 'rhine_recv' will be called to actually fetch it from the hardware. // static void rhine_RxEvent(struct eth_drv_sc *sc) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; cyg_uint8 *rxd; cyg_uint32 rstat; cyg_uint16 ints, len, mask; DEBUG_FUNCTION(); HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_ISR, ints); #if DEBUG & 1 diag_printf("RxEvent - CSR: 0x%04x\n", ints); #endif if ( 0 == (RHINE_ISR_PRX & ints) ) // Then there's no RX event pending return; // Mask interrupt HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_IMR, mask); mask &= ~RHINE_IMR_PRX; HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_IMR, mask); while (1) { // Get state of next (supposedly) full ring entry cpd->rxpacket = cpd->rx_ring_next; rxd = cpd->rx_ring + cpd->rxpacket*RHINE_RD_SIZE; rstat = _SU32(rxd, RHINE_RDES0); // Keep going until we hit an entry that is owned by the // controller. if (rstat & RHINE_RDES0_OWN) { #ifdef CYGDBG_USE_ASSERTS // Sanity check of queue int i; for (i = 0; i < cpd->rx_ring_cnt; i++) { rxd = cpd->rx_ring + i*RHINE_RD_SIZE; rstat = _SU32(rxd, RHINE_RDES0); if (!(rstat & RHINE_RDES0_OWN)) { int i; cyg_uint32 rstat; cyg_uint8* rxd; diag_printf("####Rx %s Inconsistent RX state - next was %d\n", __FUNCTION__, cpd->rx_ring_next); for (i = 0; i < cpd->rx_ring_cnt; i++) { rxd = cpd->rx_ring + i*RHINE_RD_SIZE; rstat = _SU32(rxd, RHINE_RDES0); diag_printf("#### %02d: 0x%08x\n", i, rstat); } } break; } #endif break; } #if DEBUG & 4 diag_printf("##Rx packet %d RDES %08x stat %08x\n", cpd->rxpacket, rxd, rstat); #endif // Increment counts INCR_STAT( rx_count ); cpd->rx_ring_next++; if (cpd->rx_ring_next == cpd->rx_ring_cnt) cpd->rx_ring_next = 0; len = (rstat & RHINE_RDES0_FLNG_mask) >> RHINE_RDES0_FLNG_shift; #ifdef KEEP_STATISTICS if ( rstat & RHINE_RDES0_CRC ) INCR_STAT( rx_crc_errors ); if ( rstat & RHINE_RDES0_FAE ) INCR_STAT( rx_align_errors ); if ( rstat & RHINE_RDES0_LONG ) INCR_STAT( rx_too_long_frames ); #endif // KEEP_STATISTICS if (RHINE_RDES0_RXOK & rstat) { // It's OK INCR_STAT( rx_good ); #if DEBUG & 1 diag_printf("RxEvent good rx - stat: 0x%08x, len: 0x%04x\n", rstat, len); { unsigned char *buf = cpd->rx_buffers + cpd->rxpacket*_BUF_SIZE; int i; diag_printf("RDES: %08x %08x %08x %08x\n", _SU32(rxd, RHINE_RDES0), _SU32(rxd, RHINE_RDES1), _SU32(rxd, RHINE_RDES2), _SU32(rxd, RHINE_RDES3)); diag_printf("Packet data at %p\n", buf); for (i=0;i<len;i++) diag_printf("%02x ", buf[i]); diag_printf("\n"); } #endif // Check for bogusly short packets; can happen in promisc // mode: Asserted against and checked by upper layer // driver. #ifdef CYGPKG_NET if ( len > sizeof( struct ether_header ) ) // then it is acceptable; offer the data to the network stack #endif (sc->funs->eth_drv->recv)(sc, len); } else { // Not OK for one reason or another... #if DEBUG & 1 diag_printf("RxEvent - No RX bit: stat: 0x%08x, len: 0x%04x\n", rstat, len); #endif } // Free packet (clear all status flags, and set OWN) _SU32(rxd, RHINE_RDES0) = RHINE_RDES0_OWN; } // Ack RX int HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_ISR, RHINE_ISR_PRX); // And reenable the interrupt HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_IMR, mask); mask |= RHINE_IMR_PRX; HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_IMR, mask); } // // This function is called as a result of the "eth_drv_recv()" call above. // Its job is to actually fetch data for a packet from the hardware once // memory buffers have been allocated for the packet. Note that the buffers // may come in pieces, using a scatter-gather list. This allows for more // efficient processing in the upper layers of the stack. // static void rhine_recv(struct eth_drv_sc *sc, struct eth_drv_sg *sg_list, int sg_len) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; int i, mlen=0, plen; cyg_uint8 *data, *rxd, *buf; DEBUG_FUNCTION(); rxd = cpd->rx_ring + cpd->rxpacket*RHINE_RD_SIZE; buf = cpd->rx_buffers + cpd->rxpacket*_BUF_SIZE; INCR_STAT( rx_deliver ); plen = (_SU32(rxd, RHINE_RDES0) & RHINE_RDES0_FLNG_mask) >> RHINE_RDES0_FLNG_shift; for (i = 0; i < sg_len; i++) { data = (cyg_uint8*)sg_list[i].buf; mlen = sg_list[i].len; #if DEBUG & 1 diag_printf("%s : mlen %x, plen %x\n", __FUNCTION__, mlen, plen); #endif if (data) { while (mlen > 0) { *data++ = *buf++; mlen--; plen--; } } } } static void rhine_poll(struct eth_drv_sc *sc) { struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; cyg_uint16 event, mask; static volatile bool locked = false; // DEBUG_FUNCTION(); while (1) { // Get the (unmasked) requests HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_ISR, event); HAL_PCI_IO_READ_UINT16(cpd->base + RHINE_IMR, mask); event &= mask; if (0 == event) break; if (event & RHINE_ISR_PRX) { rhine_RxEvent(sc); } else if (event & RHINE_ISR_PTX) { rhine_TxEvent(sc, event); } else if (event & RHINE_ISR_RU) { #if DEBUG & 1 int i; cyg_uint32 rstat; cyg_uint8* rxd; struct rhine_priv_data *cpd = (struct rhine_priv_data *)sc->driver_private; diag_printf("%s: Ran out of RX buffers (%04x)\n", __FUNCTION__, event); for (i = 0; i < cpd->rx_ring_cnt; i++) { rxd = cpd->rx_ring + i*RHINE_RD_SIZE; rstat = _SU32(rxd, RHINE_RDES0); diag_printf(" %02d: 0x%08x\n", i, rstat); } #endif HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_ISR, RHINE_ISR_RU); } else { #if DEBUG & 1 diag_printf("%s: Unknown interrupt: 0x%04x\n", __FUNCTION__, event); #endif // Clear unhandled interrupts and hope for the best // This should never happen though, since we only enable // the sources we handle. HAL_PCI_IO_WRITE_UINT16(cpd->base + RHINE_ISR, event); } } locked = false; } // EOF if_rhine.c
Go to most recent revision | Compare with Previous | Blame | View Log