URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [devs/] [usb/] [sa11x0/] [v2_0/] [ChangeLog] - Rev 174
Compare with Previous | Blame | View Log
2003-02-25 Jonathan Larmour <jifl@eCosCentric.com>
* doc/usbs_sa11x0.sgml: Declare as <part> not <reference> to get
correct TOC numbering.
2003-02-24 Jonathan Larmour <jifl@eCosCentric.com>
* cdl/usbs_sa11x0.cdl: Fix doc link.
* doc/usbs_sa11x0.sgml: Comment out DOCTYPE for now to allow building
with standard doc build.
Add an enclosing <reference> so it's structured better with standard
doc build.
2002-02-11 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Add a handler for the SET_INTERFACE standard control message.
This should not be needed, but appears to avoid hardware problems
when a compliance testing program sends certain requests. Also
improve the handling of halted endpoints since the hardware
does not allow transfers to be aborted.
2002-01-23 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Add missing assertions for non-NULL buffers
Try to improve the behaviour when the host sends data before
the target is ready. The hardware is not capable of handling
this situation, but some recovery is possible some of the time.
2001-09-14 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Update support for USB testing
2001-08-06 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Add initial support for USB testing.
2001-05-21 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c (usbs_sa11x0_ep2_dsr):
Fix the boundary condition where the transmission is an exact
multiple of 64 bytes. ep2_process_packet() already did the
right thing but was not getting called.
Also, some cosmetic changes to the receive code for the
same boundary condition. These actually have no effect
because of the hardware, but may be useful for other
people writing USB device drivers.
2001-04-05 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c (usbs_sa11x0_ep0_fill_fifo):
Set the DATA_END and IN_READY bits in one operation.
This seems to avoid problems when the target needs to send
back a zero-length control packet.
2001-02-02 Bart Veer <bartv@redhat.com>
* cdl/usbs_sa11x0.cdl:
Add doc property to the html
* doc/usbs_sa11x0.sgml, devs-usbs-sa11x0.html:
Incorporate changes from docs department, regenerate html
2001-01-25 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0_data.cxx:
* cdl/usbs_sa11x0.cdl:
Devtab entries were never actually being built - and did not
build...
* cdl/usbs_sa11x0.cdl:
Sort out the dependencies for minimal environments such as
RedBoot.
2001-01-24 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Invoke additional platform-specific initialization, if defined
via <cyg/hal/hal_io.h> and CYGBLD_HAL_PLATFORM_IO_H
2001-01-22 Bart Veer <bartv@redhat.com>
* doc/usbs_sa11x0.sgml, doc/makefile:
Added documentation.
2001-01-16 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Make sure that the resume interrupt source is enabled,
even when the USB bus is not suspended. For some reason
this makes it possible to disconnect and reconnect.
2001-01-16 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Use the HAL macros for virtual->physical address translation
Update poll() and start() to match the documentation
Fix the handling of control messages affecting endpoints 1 and 2
if those endpoints are not currently configured.
2001-01-02 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Change ep2_tx_packet() to start the DMA operation after the
UDC packet-complete bit has been set. This avoids a very high
error rate. Add some scheduler locking to eliminate a resulting
race condition, and sort out the error handling to match.
Comment out some assertions relating to spurious interrupts, which
have been observed. Instead the code now recovers from these.
2000-12-15 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Add debug code for tracking stats and simulating failures.
Change the EP1 code to switch between DMA channels A and B as
required, rather than always using channel A. This is more robust
and was needed for the failure simulation.
Make the ep1 packet processing code robust in case an unexpected
failure occurs during its invocation. It is not clear how this
can ever happen, but on a couple of occasions it did and caused an
infinite loop.
2000-11-30 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Fix DMA_CONTROL_CLEAR_ALL constant, it was ignoring START_B
In ep2_init(), separate out the fifo write and the IN_SIZE
write to avoid a hardware problem.
2000-11-29 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Disable some debugging features and add retries when manipulating
certain DMA registers - needed with some Silicon revisions.
2000-11-28 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
More rewriting, plus implementing the endpoint halt support.
2000-11-24 Bart Veer <bartv@redhat.com>
* src/usbs_sa11x0.c:
Clean up some of the debugging.
Largely rewrite the endpoint 2 support to try and get it working
Transmit a runt packet during initialization to work around
hardware problem.
2000-11-22 Bart Veer <bartv@redhat.com>
* include/usbs_sa11x0.h: Fix nested #include protection
2000-11-21 Bart Veer <bartv@redhat.com>
* First check-in of eCos USB support.
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================