Subversion Repositories openrisc

# ====================================================================
#
#      usbs_sa11x0.cdl
#
#      SA11X0 USB support.
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      bartv
# Original data:  bartv
# Contributors:
# Date:           2000-10-04
#
#####DESCRIPTIONEND####
# ====================================================================

cdl_package CYGPKG_DEVS_USB_SA11X0 {
    display     "SA11X0 USB Device Driver"
    include_dir "cyg/io/usb"
    parent      CYGPKG_USB
    implements  CYGHWR_IO_USB_SLAVE
    doc         ref/devs-usb-sa11x0.html

    # Make sure that we are running on the right hardware.
    requires CYGPKG_HAL_ARM
    requires CYGPKG_HAL_ARM_SA11X0

    
    description "
        The on-chip serial port 0 on the SA11X0 implements a USB
        device controller, facilitating the use of this processor
        in USB peripherals. This package provides a suitable eCos
        device driver."


    cdl_option CYGFUN_DEVS_USB_SA11X0_EP0 {
        display       "Support the control endpoint 0"
        default_value CYGINT_IO_USB_SLAVE_CLIENTS
        # And the USB support packages
        requires      CYGPKG_IO_USB CYGPKG_IO_USB_SLAVE
        compile       usbs_sa11x0.c
        compile       -library=libextras.a usbs_sa11x0_data.cxx
        description "
            Enable support for endpoint 0. If this support is disabled
            then the entire USB port is unusable."
    }
    
    cdl_option CYGVAR_DEVS_USB_SA11X0_EP0_DEVTAB_ENTRY {
        display       "Provide a devtab entry for endpoint 0"
        default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
        requires      CYGPKG_IO
        description "
            If endpoint 0 will only be accessed via the low-level
            USB-specific calls then there is no need for an entry
            in the device table, saving some memory. If the
            application intends to access the endpoint by means
            of open and ioctl calls then a devtab entry is needed.
        "
    }
    
    cdl_component CYGPKG_DEVS_USB_SA11X0_EP1 {
        display       "Support endpoint 1, used for host->slave communications"
        implements    CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS
        requires      CYGFUN_DEVS_USB_SA11X0_EP0
        default_value CYGFUN_DEVS_USB_SA11X0_EP0
        description "
            In the SA11X0 USB implementation endpoint 1 can only be
            used for host->slave communication. If the intended application
            only involves slave->host transfers then the support for
            endpoint 1 can be disabled. Note that this does not affect
            control messages which always go via endpoint 0."

        cdl_option CYGNUM_DEVS_USB_SA11X0_EP1_DMA_CHANNEL {
            display       "Control DMA usage for endpoint 1"
            flavor        booldata
            legal_values  0 to 5
            default_value 4
            description "
                In the SA11X0 USB implementation endpoint 1 only has
                a 20-byte fifo. If the application only involves
                small transfers then this may prove sufficient, but
                for larger transfers the use of a DMA engine is
                mandated. This configuration option allows the
                use of DMA engine to be disabled or enabled, and the
                specific DMA channel to be selected. The SA11X0
                supports 6 DMA channels numbered 0 to 5. If DMA
                is enabled for endpoint 1 then the selected channel
                cannot be used by any other code."
        }

        cdl_option CYGVAR_DEVS_USB_SA11X0_EP1_DEVTAB_ENTRY {
            display       "Provide a devtab entry for endpoint 1"
            default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
            requires      CYGPKG_IO 
            description "
                If endpoint 1 will only be accessed via the low-level
                USB-specific calls then there is no need for an entry
                in the device table, saving some memory. If the
                application intends to access the endpoint by means
                of open and read calls then a devtab entry is needed.
            "
        }
    }

    cdl_component CYGPKG_DEVS_USB_SA11X0_EP2 {
        display       "Support endpoint 2, used for slave->host communications"
        implements CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS
        requires      CYGFUN_DEVS_USB_SA11X0_EP0
        default_value CYGFUN_DEVS_USB_SA11X0_EP0
        description "
            In the SA11X0 USB implementation endpoint 2 can only be
            used for slave->host communication. If the intended application
            only involves host->slave transfers then the support for
            endpoint 2 can be disabled. Note that this does not affect
            control messages which always go via endpoint 0."

        cdl_option CYGNUM_DEVS_USB_SA11X0_EP2_DMA_CHANNEL {
            display       "Control DMA usage for endpoint 2"
            flavor        booldata
            legal_values  0 to 5
            default_value 5
            description "
                In the SA11X0 USB implementation endpoint 2 only has
                a 16-byte fifo. If the application only involves
                small transfers then this may prove sufficient, but
                for larger transfers the use of a DMA engine is
                mandated. This configuration option allows the
                use of DMA engine to be disabled or enabled, and the
                specific DMA channel to be selected. The SA11X0
                supports 6 DMA channels numbered 0 to 5. If DMA
                is enabled for endpoint 2 then the selected channel
                cannot be used by any other code."
        }
        
        cdl_option CYGVAR_DEVS_USB_SA11X0_EP2_DEVTAB_ENTRY {
            display       "Provide a devtab entry for endpoint 2"
            default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
            requires      CYGPKG_IO
            description "
                If endpoint 2 will only be accessed via the low-level
                USB-specific calls then there is no need for an entry
                in the device table, saving some memory. If the
                application intends to access the endpoint by means
                of open and write calls then a devtab entry is needed.
            "
        }
    }

    cdl_option CYGDAT_DEVS_USB_SA11X0_DEVTAB_BASENAME {
        display       "Base name for devtab entries"
        flavor        data
        active_if     { CYGVAR_DEVS_USB_SA11X0_EP0_DEVTAB_ENTRY ||
                        CYGVAR_DEVS_USB_SA11X0_EP1_DEVTAB_ENTRY ||
                        CYGVAR_DEVS_USB_SA11X0_EP2_DEVTAB_ENTRY
        }
        default_value { "\"/dev/usbs\"" }
        description "
            If the SA11X0 USB device driver package provides devtab
            entries for any of the endpoints then this option gives
            control over the names of these entries. By default the
            endpoints will be called \"/dev/usbs0c\", \"/dev/usbs1r\"
            and \"/dev/usbs2w\" (assuming all three endpoints are
            enabled. The common part \"/dev/usbs\" is determined
            by this configuration option. It may be necessary to
            change this if there are multiple USB slave-side
            devices on the target hardware to prevent a name clash.
        "
    }
}