URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [ecos.db] - Rev 574
Go to most recent revision | Compare with Previous | Blame | View Log
#=============================================================================
#
# ecos.db
#
# This file is a temporary database for eCos package information.
# It replaces the old packages and targets files, and will in turn
# be subsumed by another file containing more inormation.
#
#=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
#=============================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): bartv
# Date: 1999-06-13
#
# This file contains three lots of information. It details the packages
# in the component repository, the target boards supported by those
# packages, and a set of templates that can be used to instantiate
# configuration.
#
#####DESCRIPTIONEND####
#===============================================================================
package CYGPKG_HAL {
alias { "eCos common HAL" hal hal_common }
directory hal/common
script hal.cdl
description "
The eCos HAL package provide a porting layer for higher-level parts of
the system such as the kernel and the C library. Each installation
should have HAL packages for one or more architectures, and for each
architecture there may be one or more supported platforms. It is
necessary to select one target architecture and one platform for that
architecture. There are also a number of configuration options that
are common to all HAL packages."
}
package CYGPKG_INFRA {
alias { Infrastructure infra }
directory infra
script infra.cdl
description "
Common types and useful macros.
Tracing and assertion facilities.
Package startup options."
}
package CYGPKG_IO {
alias { "I/O sub-system" io }
directory io/common
script io.cdl
description "
The eCos system is supplied with a number of different
device drivers. This package contains the basic I/O system
support which is the basis for all drivers."
}
package CYGPKG_IO_SERIAL {
alias { "Serial device drivers" serial io_serial }
directory io/serial
script io_serial.cdl
description "
This package contains drivers for basic I/O services on
serial devices."
}
package CYGPKG_IO_PCMCIA {
alias { "PCMCIA & Compact Flash support" pcmcia io_pcmcia cf }
directory io/pcmcia
script io_pcmcia.cdl
description "
This package contains basic card services support for PCMCIA
and Compact Flash devices."
}
package CYGPKG_DEVS_PCMCIA_ASSABET {
alias { "SA11x0/Assabet PCMCIA & Compact Flash support" pcmcia_assabet assabet_pcmcia assabet_cf io_assabet_pcmcia}
directory devs/pcmcia/arm/assabet
script pcmcia_assabet.cdl
hardware
description "
This package contains hardware support for PCMCIA
and Compact Flash devices on the SA11x0/Assabet board."
}
package CYGPKG_DEVS_PCMCIA_CERF {
alias { "SA11x0/Cerf PCMCIA & Compact Flash support" pcmcia_cerf cerf_pcmcia cerf_cf io_cerf_pcmcia}
directory devs/pcmcia/arm/cerf
script pcmcia_cerf.cdl
hardware
description "
This package contains hardware support for PCMCIA
and Compact Flash devices on the SA11x0/Cerf board."
}
package CYGPKG_DEVS_PCMCIA_CERFPDA {
alias { "SA11x0/Cerfpda PCMCIA & Compact Flash support" pcmcia_cerfpda cerfpda_pcmcia cerfpda_cf io_cerfpda_pcmcia}
directory devs/pcmcia/arm/cerfpda
script pcmcia_cerfpda.cdl
hardware
description "
This package contains hardware support for PCMCIA
and Compact Flash devices on the SA11x0/Cerfpda."
}
package CYGPKG_DEVS_PCMCIA_IPAQ {
alias { "SA11x0/iPAQ PCMCIA & Compact Flash support" pcmcia_ipaq ipaq_pcmcia ipaq_cf io_ipaq_pcmcia}
directory devs/pcmcia/arm/ipaq
script pcmcia_ipaq.cdl
hardware
description "
This package contains hardware support for PCMCIA
and Compact Flash devices on the Compaq iPAQ pocket PC."
}
package CYGPKG_IO_FLASH {
alias { "Generic FLASH memory support" flash }
directory io/flash
script io_flash.cdl
description "
This package contains generic support for FLASH memory."
}
package CYGPKG_DEVS_FLASH_INTEL_BOOTBLOCK {
alias { "Support for Intel boot block flash memory" flash_intel_bootblock }
directory devs/flash/intel/bootblock
script flash_intel_bootblock.cdl
hardware
description "
This package contains hardware support for Intel boot block flash memory."
}
package CYGPKG_DEVS_FLASH_ARM_AAED2000 {
alias { "Support for flash memory on Agilent AAED2000 board" flash_aaed2000 }
directory devs/flash/arm/aaed2000
script flash_arm_aaed2000.cdl
hardware
description "
This package contains hardware support for flash memory
on the Agilent AAED2000 platform."
}
package CYGPKG_DEVS_FLASH_AMD_AM29XXXXX {
alias { "Support for AMD AM29xxxxx flash memory" flash_amd_am29xxxxx }
directory devs/flash/amd/am29xxxxx
script flash_amd_am29xxxxx.cdl
hardware
description "
This package contains hardware support for AMD AM29xxxxx
flash memory devices."
}
package CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX {
alias { "Support for Atmel AT29Cxxxx flash memory" flash_atmel_at29cxxxx }
directory devs/flash/atmel/at29cxxxx
script flash_atmel_at29cxxxx.cdl
hardware
description "
This package contains hardware support for Atmel AT29Cxxxx
flash memory devices."
}
package CYGPKG_DEVS_FLASH_ARM_PID {
alias { "Support for flash memory on ARM/PID board" flash_arm_pid }
directory devs/flash/arm/pid
script flash_arm_pid.cdl
hardware
description "
This package contains hardware support for flash memory
on the ARM PID platform."
}
package CYGPKG_DEVS_FLASH_SH_EDK7708 {
alias { "Support for flash memory on Hitachi/EDK7708 board" flash_sh_edk7708 }
directory devs/flash/sh/edk7708
script flash_sh_edk7708.cdl
hardware
description "
This package contains hardware support for flash memory
on the Hitachi EDK7708 platform."
}
package CYGPKG_DEVS_FLASH_CQ7750 {
alias { "Support for flash memory on CqREEK SH7750 board" flash_cq7750 }
directory devs/flash/sh/cq7750
script flash_cq7750.cdl
hardware
description "
This package contains hardware support for flash memory
on the CqREEK SH7750 platform."
}
package CYGPKG_DEVS_FLASH_MIPS_OCELOT {
alias { "Support for flash memory on PMC-Sierra/Ocelot board" flash_qed_ocelot }
directory devs/flash/mips/ocelot
script flash_mips_ocelot.cdl
hardware
description "
This package contains hardware support for flash memory
on the PMC-Sierra Ocelot platform."
}
package CYGPKG_DEVS_FLASH_OPENRISC_ORP {
alias { "Support for flash memory for OpenRISC Reference Platform (ORP)"
flash_openrisc_orp }
directory devs/flash/openrisc/orp
script flash_openrisc_orp.cdl
hardware
description "
This package contains hardware support for AM29xxxxx flash memory
on the OpenRISC Reference Platform."
}
package CYGPKG_DEVS_FLASH_MIPS_VRC437X {
alias { "Support for flash memory on VRC437X boards" flash_vrc437x }
directory devs/flash/mips/vrc437x
script flash_mips_vrc437x.cdl
hardware
description "
This package contains hardware support for flash memory
on the VRC437X platform."
}
package CYGPKG_DEVS_FLASH_MIPS_REFIDT334 {
alias { "MIPS IDT 79RC32334 reference platform flash support" flash_refidt334 }
directory devs/flash/mips/idt79s334a
script flash_mips_refidt334.cdl
hardware
description "
This package contains hardware support for flash memory
on the IDT MIPS 334a reference platform."
}
package CYGPKG_DEVS_FLASH_SH_HS7729PCI {
alias { "Hitachi SH/HS7729PCI FLASH memory support" flash_hs7729pci }
directory devs/flash/sh/hs7729pci
script flash_sh_hs7729pci.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Hitachi/HS7729PCI platform."
}
package CYGPKG_DEVS_FLASH_SH_SE77X9 {
alias { "Hitachi SH/SE77X9 FLASH memory support" flash_se77x9 }
directory devs/flash/sh/se77x9
script flash_sh_se77x9.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Hitachi/SE77X9 platform."
}
package CYGPKG_DEVS_FLASH_SH_SE7751 {
alias { "Hitachi SH/SE7751 FLASH memory support" flash_se7751 }
directory devs/flash/sh/se7751
script flash_sh_se7751.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Hitachi/SE7751 platform."
}
package CYGPKG_DEVS_FLASH_EBSA285 {
alias { "FLASH memory support for StrongARM EBSA-285" flash_ebsa285 }
directory devs/flash/arm/ebsa285
script flash_ebsa285.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the StrongARM EBSA-285 platform."
}
package CYGPKG_DEVS_FLASH_SA1100MM {
alias { "FLASH memory support for StrongARM SA1100 Multimedia" flash_sa1100mm }
directory devs/flash/arm/sa1100mm
script flash_sa1100mm.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the StrongARM SA1100 Multimedia platform."
}
package CYGPKG_DEVS_FLASH_EDB7XXX {
alias { "FLASH support for Cirrus Logic EP7xxx based boards" flash_edb7xxx }
directory devs/flash/arm/edb7xxx
script flash_edb7xxx.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Cirrus Logic EP7xxx based platform(s)."
}
package CYGPKG_DEVS_FLASH_AT91 {
alias { "FLASH memory support for Atmel AT91/EB40" flash_at91 }
directory devs/flash/arm/at91
script flash_at91.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Atmel AT91/EB40 platform(s)."
}
package CYGPKG_DEVS_FLASH_ASSABET {
alias { "FLASH memory support for Intel SA1110 (Assabet)" flash_assabet }
directory devs/flash/arm/assabet
script flash_assabet.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Intel StrongARM SA-1110 Assabet platform."
}
package CYGPKG_DEVS_FLASH_CERF {
alias { "FLASH memory support for Intrinsyc SA1110 (Cerf)" flash_cerf }
directory devs/flash/arm/cerf
script flash_cerf.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Intrinsyc SA1110 Cerf board."
}
package CYGPKG_DEVS_FLASH_CERFPDA {
alias { "FLASH memory support for Intrinsyc SA1110 (Cerfpda)" flash_cerfpda }
directory devs/flash/arm/cerfpda
script flash_cerfpda.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Intrinsyc SA1110 Cerfpda."
}
package CYGPKG_DEVS_FLASH_IPAQ {
alias { "FLASH memory support for Intel SA1110 (Ipaq)" flash_ipaq }
directory devs/flash/arm/ipaq
script flash_ipaq.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Intel StrongARM SA-1110 iPAQ platform."
}
package CYGPKG_DEVS_FLASH_FLEXANET {
alias { "FLASH memory support for Flexanet" flash_flexanet }
directory devs/flash/arm/flexanet
script flash_flexanet.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the SA-1100 Flexanet platform."
}
package CYGPKG_DEVS_FLASH_MPC50 {
alias { "FLASH memory support for MPC 5.0" flash_mpc50 }
directory devs/flash/arm/mpc50
script flash_mpc50.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the MPC 5.0."
}
package CYGPKG_DEVS_FLASH_MALTA {
alias { "FLASH memory support for MIPS Malta board" flash_malta }
directory devs/flash/mips/malta
script flash_malta.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the MIPS Malta platform."
}
package CYGPKG_DEVS_FLASH_ARM_EXCALIBUR {
alias { "FLASH memory support for Altera ARM9/Excalibur board" flash_malta }
directory devs/flash/arm/excalibur
script flash_excalibur.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Altera Excalibur platform."
}
package CYGPKG_DEVS_FLASH_ARM_INNOVATOR {
alias { "FLASH memory support for the Innovator" flash_innovator }
directory devs/flash/arm/innovator
script flash_innovator.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Innovator platform."
}
package CYGPKG_DEVS_FLASH_NANO {
alias { "FLASH memory support for Intel SA1110 nanoEngine" flash_nano }
directory devs/flash/arm/nano
script flash_nano.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the StrongARM SA-1110 nanoEngine platform."
}
package CYGPKG_DEVS_FLASH_STRATA {
alias { "Generic FLASH memory support for Intel StrataFLASH" strata }
directory devs/flash/intel/strata
script flash_strata.cdl
hardware
description "
This package contains generic hardware support for Intel
StrataFLASH memory devices."
}
package CYGPKG_DEVS_FLASH_INTEL_28FXXX {
alias { "Generic FLASH memory support for Intel 28Fxxx Flash parts" flashfile }
directory devs/flash/intel/28fxxx
script flash_intel_28fxxx.cdl
hardware
description "
This package contains generic hardware support for Intel
Flash memory devices."
}
package CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310 {
alias { "FLASH memory support for Cyclone IQ80310" flash_iq80310 }
directory devs/flash/arm/iq80310
script flash_iq80310.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Cyclone IQ80310 platform."
}
package CYGPKG_DEVS_FLASH_IQ80321 {
alias { "FLASH memory support for IQ80321" flash_iq80321 }
directory devs/flash/arm/iq80321
script flash_iq80321.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the IQ80321 platform."
}
package CYGPKG_DEVS_FLASH_ARM_INTEGRATOR {
alias { "FLASH memory support for ARM INTEGRATOR" flash_integrator }
directory devs/flash/arm/integrator
script flash_integrator.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the ARM INTEGRATOR platform."
}
package CYGPKG_DEVS_FLASH_MBX {
alias { "FLASH memory support for Motorola PowerPC/860 MBX" flash_mbx }
directory devs/flash/powerpc/mbx
script flash_mbx.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Motorola PowerPC/860 MBX platform."
}
package CYGPKG_DEVS_FLASH_TS6 {
alias { "FLASH memory support for Delphi Communication Systems, Inc. TigerSHARC6 Board" flash_ts6 }
directory devs/flash/powerpc/ts6
script flash_ts6.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Delphi Communication Systems TigerSHARC6 platform."
}
package CYGPKG_DEVS_FLASH_VADS {
alias { "FLASH memory support for Motorola MPC8260 Voyager ADS board" flash_vads }
directory devs/flash/powerpc/vads
script flash_vads.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Motorola MPC8260 Voyager ADS platform."
}
package CYGPKG_DEVS_FLASH_CME555 {
alias { "FLASH memory support for Axiom's CME555" flash_cme555 }
directory devs/flash/powerpc/cme555
script flash_cme555.cdl
hardware
description "
This package contains hardware support for FLASH memory
on Axiom's CME555 board."
}
package CYGPKG_DEVS_FLASH_EC555 {
alias { "FLASH memory support for ec555 board" flash_ec555 }
directory devs/flash/powerpc/ec555
script flash_ec555.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the ec555 board."
}
package CYGPKG_DEVS_FLASH_VIPER {
alias { "FLASH memory support for A&M Viper PowerPC/8xx" flash_viper }
directory devs/flash/powerpc/viper
script flash_viper.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the A&M PowerPC/8xx VIPER platform."
}
package CYGPKG_DEVS_FLASH_POWERPC_ADDER {
alias { "FLASH memory support for A&M Adder PowerPC/85x" flash_adder }
directory devs/flash/powerpc/adder
script flash_adder.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the A&M PowerPC/8xx ADDER platform."
}
package CYGPKG_DEVS_FLASH_MN10300_STB {
alias { "FLASH memory support for Matsushita MN10300 STB" flash_stb }
directory devs/flash/mn10300/stb
script flash_stb.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Matsushita MN10300 STB platform (SRAM2 socket)."
}
package CYGPKG_DEVS_FLASH_MN10300_ASB2303 {
alias { "FLASH memory support for Matsushita ASB2303" flash_asb2303 }
directory devs/flash/mn10300/asb2303
script flash_asb2303.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Matsushita MN10300 ASB2303 platform (system flash socket)."
}
package CYGPKG_DEVS_FLASH_MN10300_ASB2305 {
alias { "FLASH memory support for Matsushita ASB2305" flash_asb2305 }
directory devs/flash/mn10300/asb2305
script flash_asb2305.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Matsushita MN10300 ASB2305 platform (system flash socket)."
}
package CYGPKG_DEVS_FLASH_ATLAS {
alias { "FLASH memory support for MIPS Atlas" flash_atlas }
directory devs/flash/mips/atlas
script flash_atlas.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the MIPS Atlas platform."
}
package CYGPKG_DEVS_FLASH_SYNTH {
alias { "Synthetic FLASH memory support" synth_flash flash_synth }
directory devs/flash/synth
script flash_synth.cdl
hardware
description "
FLASH memory device support for Synthetic target"
}
package CYGPKG_DEVS_FLASH_FRV_FRV400 {
alias { "Fujitsu FRV400 FLASH memory support" flash_frv400 }
directory devs/flash/frv/frv400
script flash_frv_frv400.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Fujitsu FRV400 platform."
}
package CYGPKG_DEVS_TOUCH_IPAQ {
alias { "Touch screen support for iPAQ" touch_ipaq }
directory devs/touch/arm/ipaq
script touch_ipaq.cdl
hardware
description "
This package contains hardware support for the touch screen
on the Compaq iPAQ Pocket PC."
}
package CYGPKG_DEVS_KBD_IPAQ {
alias { "Keypad/button support for iPAQ" kbd_ipaq }
directory devs/kbd/arm/ipaq
script kbd_ipaq.cdl
hardware
description "
This package contains hardware support for the keyboard buttons
on the Compaq iPAQ Pocket PC."
}
package CYGPKG_DEVS_TOUCH_AAED2000 {
alias { "Touch screen support for Agilent AAED2000" touch_aaed2000 }
directory devs/touch/arm/aaed2000
script touch_aaed2000.cdl
hardware
description "
This package contains hardware support for the touch screen
on the Agilent AAED2000 prototype."
}
package CYGPKG_DEVS_KBD_AAED2000 {
alias { "Keyboard support for Agilent AAED2000" kbd_aaed2000 }
directory devs/kbd/arm/aaed2000
script kbd_aaed2000.cdl
hardware
description "
This package contains hardware support for the keyboard
on the Agilent AAED2000 prototype."
}
package CYGPKG_IO_SERIAL_ARM_EBSA285 {
alias { "Intel EBSA285 serial driver"
devs_serial_arm_ebsa285 ebsa285_serial_driver }
hardware
directory devs/serial/arm/ebsa285
script ser_arm_ebsa285.cdl
description "Intel StrongARM/EBSA285 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310 {
alias { "Intel XScale IOP310 serial driver"
devs_serial_arm_iop310 iop310_serial_driver }
hardware
directory devs/serial/arm/iop310
script ser_arm_iop310.cdl
description "Intel XScale IOP310 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_IQ80321 {
alias { "Intel XScale IQ80321 serial driver"
devs_serial_arm_iq80321 iq80321_serial_driver }
hardware
directory devs/serial/arm/iq80321
script ser_arm_iq80321.cdl
description "Intel XScale/IQ80321 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_SA11X0 {
alias { "Intel StrongARM SA11x0 serial driver"
devs_serial_arm_sa11x0 sa11x0_serial_driver }
hardware
directory devs/serial/arm/sa11x0
script ser_arm_sa11x0.cdl
description "Intel StrongARM/SA11x0 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_PID {
alias { "ARM PID serial device drivers"
devs_serial_arm_pid pid_serial_driver }
hardware
directory devs/serial/arm/pid
script ser_arm_pid.cdl
description "ARM PID serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_CERFPDA {
alias { "Cerfpda 16x5x serial device drivers"
devs_serial_arm_cerfpda cerfpda_serial_driver }
hardware
directory devs/serial/arm/cerfpda
script ser_arm_cerfpda.cdl
description "Cerfpda serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_AEB {
alias { "ARM AEB-1 serial device drivers"
devs_serial_arm_aeb aeb_serial_driver }
hardware
directory devs/serial/arm/aeb
script ser_arm_aeb.cdl
description "ARM AEB-1 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_AAED2000 {
alias { "Agilent AAED2000 serial device drivers"
devs_serial_arm_aaed2000 aaed2000_serial_driver }
hardware
directory devs/serial/arm/aaed2000
script ser_arm_aaed2000.cdl
description "Agilent AAED2000 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_EDB7XXX {
alias { "Cirrus Logic ARM based board serial device drivers"
devs_serial_arm_edb7xxx edb7xxx_serial_driver }
hardware
directory devs/serial/arm/edb7xxx
script ser_arm_edb7xxx.cdl
description "Cirrus Logic ARM based development board serial
device drivers"
}
package CYGPKG_IO_SERIAL_ARM_CMA230 {
alias { "Cogent ARM/CMA230 serial device drivers"
devs_serial_arm_cma230 cma230_serial_driver }
hardware
directory devs/serial/arm/cma230
script ser_arm_cma230.cdl
description "Cogent ARM/CMA230 serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_E7T {
alias { "ARM AEB-2 (E7T) serial device drivers"
devs_serial_arm_e7t e7t_serial_driver }
hardware
directory devs/serial/arm/e7t
script ser_arm_e7t.cdl
description "ARM AEB-2 (E7T) serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_INTEGRATOR {
alias { "ARM INTEGRATOR serial device drivers"
devs_serial_arm_integrator integrator_serial_driver }
hardware
directory devs/serial/arm/integrator
script ser_arm_integrator.cdl
description "ARM INTEGRATOR serial device drivers"
}
package CYGPKG_IO_SERIAL_ARM_AT91 {
alias { "Atmel AT91 evaluation board (EB40)"
devs_serial_arm_at91 at91_serial_driver }
hardware
directory devs/serial/arm/at91
script ser_arm_at91.cdl
description "Atmel AT91 evaluation board (EB40) serial drivers."
}
package CYGPKG_IO_SERIAL_POWERPC_COGENT {
alias { "Cogent PowerPC serial device drivers"
devs_serial_powerpc_cogent cogent_serial_driver }
hardware
directory devs/serial/powerpc/cogent
script ser_powerpc_cogent.cdl
description "Cogent PowerPC serial device drivers"
}
package CYGPKG_IO_SERIAL_POWERPC_EC555 {
alias { "ec555 PowerPC serial device drivers"
devs_serial_powerpc_ec555 ec555_serial_driver }
hardware
directory devs/serial/powerpc/ec555
script ser_powerpc_ec555.cdl
description "ec555 PowerPC serial device drivers"
}
package CYGPKG_IO_SERIAL_POWERPC_CME555 {
alias { "cme555 PowerPC serial device drivers"
devs_serial_powerpc_cme555 cme555_serial_driver }
hardware
directory devs/serial/powerpc/cme555
script ser_powerpc_cme555.cdl
description "cme555 PowerPC serial device drivers"
}
package CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC {
alias { "PowerPC QUICC/SMC serial device drivers"
devs_serial_quicc_smc quicc_smc_serial_driver
devs_serial_powerpc_quicc_smc
devs_serial_powerpc_quicc quicc_serial_driver }
hardware
directory devs/serial/powerpc/quicc
script ser_quicc_smc.cdl
description "PowerPC QUICC/SMC serial device drivers"
}
package CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC {
alias { "PowerPC VADS QUICC2/SCC serial device drivers"
devs_serial_quicc2_scc quicc2_scc_serial_driver
devs_serial_powerpc_quicc2_scc
devs_serial_powerpc_quicc2 quicc2_serial_driver }
hardware
directory devs/serial/powerpc/quicc2
script ser_quicc2_scc.cdl
description "PowerPC VADS QUICC2/SCC serial device drivers"
}
package CYGPKG_IO_SERIAL_SPARCLITE_SLEB {
alias { "SPARClite SLEB serial device drivers"
devs_serial_sparclite_sleb sleb_serial_driver }
hardware
directory devs/serial/sparclite/sleb
script ser_sparclite_sleb.cdl
description "SPARClite SLEB serial device drivers"
}
package CYGPKG_IO_SERIAL_TX39_JMR3904 {
alias { "TX39 JMR3904 serial device drivers"
devs_serial_tx39_jmr3904 jmr3904_serial_driver
devs_serial_mips_jmr3904 tx3904_serial_driver }
hardware
directory devs/serial/mips/jmr3904
script ser_mips_jmr3904.cdl
description "TX39 JMR3904 serial device drivers"
}
package CYGPKG_IO_SERIAL_MIPS_ATLAS {
alias { "Atlas serial device drivers"
devs_serial_atlas atlas_serial_driver
devs_serial_mips_atlas mips_atlas_serial_driver }
hardware
directory devs/serial/mips/atlas
script ser_mips_atlas.cdl
description "Atlas serial device drivers"
}
package CYGPKG_IO_SERIAL_MIPS_REF4955 {
alias { "TX49 REF4955 serial device drivers"
devs_serial_mips_ref4955 ref4955_serial_driver }
hardware
directory devs/serial/mips/ref4955
script ser_mips_ref4955.cdl
description "TX49 REF4955 serial device drivers"
}
package CYGPKG_IO_SERIAL_MIPS_VRC437X {
alias { "VRC437X serial device drivers"
devs_serial_mips_vrc437x vrc437x_serial_driver }
hardware
directory devs/serial/mips/vrc437x
script ser_mips_vrc437x.cdl
description "VRC437X serial device drivers"
}
package CYGPKG_IO_SERIAL_MN10300 {
alias { "MN10300 serial device drivers"
devs_serial_mn10300_mn10300
devs_serial_mn10300 mn10300_serial_driver }
hardware
directory devs/serial/mn10300/mn10300
script ser_mn10300.cdl
description "MN10300 serial device drivers"
}
package CYGPKG_IO_SERIAL_I386_PC {
alias { "PC serial device drivers"
devs_serial_i386_pc pc_serial_driver }
hardware
directory devs/serial/i386/pc
script ser_i386_pc.cdl
description "PC serial device drivers"
}
package CYGPKG_IO_SERIAL_GENERIC_16X5X {
alias { "16x5x compatible serial device drivers"
devs_serial_generic_16x5x 16x5x_serial_driver }
hardware
directory devs/serial/generic/16x5x
script ser_generic_16x5x.cdl
description "16x5x compatible serial device drivers"
}
package CYGPKG_IO_SERIAL_SH_SCI {
alias { "SH SCI serial device drivers"
devs_serial_sh_sci sci_serial_driver }
hardware
directory devs/serial/sh/sci
script ser_sh_sci.cdl
description "SH SCI serial device drivers"
}
package CYGPKG_IO_SERIAL_SH_SCIF {
alias { "SH SCIF serial device drivers"
devs_serial_sh_scif scif_serial_driver }
hardware
directory devs/serial/sh/scif
script ser_sh_scif.cdl
description "SH SCIF serial device drivers"
}
package CYGPKG_DEVS_ETH_ARM_CERF {
alias { "Crystal LAN ethernet driver for Cerf boards" cerf_eth_driver }
hardware
directory devs/eth/arm/cerf
script cerf_eth_drivers.cdl
description "Ethernet driver for Crystal LAN on Cerf based
development boards."
}
package CYGPKG_DEVS_ETH_ARM_CERFPDA {
alias { "Crystal LAN ethernet driver for the Cerfpda" cerfpda_eth_driver }
hardware
directory devs/eth/arm/cerfpda
script cerfpda_eth_drivers.cdl
description "Ethernet driver for Crystal LAN on the Cerfpda."
}
package CYGPKG_IO_SERIAL_SH_EDK7708 {
alias { "SH3 EDK7708 serial device drivers"
devs_serial_sh3_edk7708
devs_serial_sh_edk7708 edk7708_serial_driver }
hardware
directory devs/serial/sh/edk7708
script ser_sh_edk7708.cdl
description "SH3 EDK7708 serial device drivers"
}
package CYGPKG_IO_SERIAL_SH_CQ7708 {
alias { "SH3 cq7708 serial device drivers"
devs_serial_sh3_cq7708
devs_serial_sh_cq7708 cq7708_serial_driver }
hardware
directory devs/serial/sh/cq7708
script ser_sh_cq7708.cdl
description "SH3 cq7708 serial device drivers"
}
package CYGPKG_IO_SERIAL_SH_SE77X9 {
alias { "SH3 SE77X9 serial device driver"
devs_serial_sh3_se77x9 se77x9_serial_driver }
hardware
directory devs/serial/sh/se77x9
script ser_sh_se77x9.cdl
description "SH3 SE77x9 serial device driver"
}
package CYGPKG_IO_SERIAL_V85X_V850 {
alias { "NEC V850 serial device drivers"
devs_serial_v85x_v850 v850_serial_driver }
hardware
directory devs/serial/v85x/v850
script ser_v85x_v850.cdl
description "Serial device drivers for systems based on NEC V850
SA1 (70F3017) or SB1 (70F3033) processors."
}
package CYGPKG_IO_SERIAL_MIPS_UPD985XX {
alias { "NEC MIPS uPD985xx serial driver"
devs_serial_mips_upd985xx upd985xx_serial_driver }
hardware
directory devs/serial/mips/upd985xx
script ser_mips_upd985xx.cdl
description "NEC MIPS uPD985xx serial device drivers"
}
package CYGPKG_IO_SERIAL_MIPS_IDT79S334A {
alias { "MIPS IDT 79RC32334 reference platform serial device drivers"
devs_serial_idt79s334a idt79s334a_serial_driver
devs_serial_mips_idt79s334 mips_idt79s334a_serial_driver }
hardware
directory devs/serial/mips/idt79s334a
script ser_mipsidt_334a.cdl
description "IDT 334a reference platform serial device drivers"
}
package CYGPKG_IO_SERIAL_H8300_SCI {
alias { "H8/300 SCI serial device drivers"
devs_serial_h8300h_sci sci_serial_driver }
hardware
directory devs/serial/h8300/h8300h
script serial_h8300.cdl
description "H8/300 SCI serial device drivers"
}
package CYGPKG_IO_SERIAL_MCF5272_UART {
alias { "MCF5272 Serial UART Drivers"
devs_MCF5272_uart_driver }
hardware
directory devs/serial/mcf52xx/mcf5272
script ser_mcf5272_uart.cdl
description "Serial MCF5272 UART Drivers."
}
package CYGPKG_IO_SERIAL_LOOP {
alias { "Loop serial device drivers"
devs_serial_loop loop_serial_driver }
directory devs/serial/loop
script ser_loop.cdl
description "Loopback serial device driver."
}
package CYGPKG_IO_FILEIO {
alias { "File IO" fileio io_file }
directory io/fileio
script fileio.cdl
description "
This package contains the infrastructure for doing POSIX compliant
file IO."
}
package CYGPKG_FS_RAM {
alias { "RAM Filesystem" ramfs ram_fs fs_ram }
directory fs/ram
script ramfs.cdl
description "
This package contains a RAM resident filesystem."
}
package CYGPKG_FS_ROM {
alias { "ROM Filesystem" romfs rom_fs fs_rom }
directory fs/rom
script romfs.cdl
description "
This package contains a ROM resident filesystem."
}
package CYGPKG_FS_JFFS2 {
alias { "JFFS2 Filesystem" jffs2 }
directory fs/jffs2
script jffs2.cdl
description "
This package contains the JFFS2 filesystem."
}
package CYGPKG_LINUX_COMPAT {
alias { "Linux compatibility" linux_compat linuxcompat }
directory compat/linux
script linux.cdl
description "
eCos supports a basic Linux compatibility Layer providing various
functions, equivalents or stubs expected by Linux kernel code, for
assistance in porting drivers and file system code from Linux.
Note this does not provide Linux compatibility to applications."
}
package CYGPKG_IO_ETH_DRIVERS {
alias { "Common ethernet support" net_drivers eth_drivers CYGPKG_NET_ETH_DRIVERS }
directory io/eth
script eth_drivers.cdl
description "Platform independent ethernet support."
}
package CYGPKG_IO_USB {
alias { "Generic USB support" usb }
hardware
directory io/usb/common
script usb.cdl
description "Generic USB support"
}
package CYGPKG_IO_USB_SLAVE {
alias { "Generic USB slave-side support" usbs }
hardware
directory io/usb/slave
script usbs.cdl
description "Generic USB slave-side support"
}
package CYGPKG_IO_USB_SLAVE_ETH {
alias { "USB slave-side ethernet class drivers" usbs_eth }
directory io/usb/eth/slave
script usbs_eth.cdl
description "Support for USB peripherals that provide an ethernet-class function"
}
package CYGPKG_DEVS_USB_SA11X0 {
alias { "Device-driver for the SA11X0 on-chip USB support" usb_sa11x0 }
hardware
directory devs/usb/sa11x0
script usbs_sa11x0.cdl
description "A device driver for the SA11X0 on-chip USB slave port"
}
package CYGPKG_DEVS_USB_UPD985XX {
alias { usb_upd985xx }
hardware
directory devs/usb/nec_upd985xx
script usbs_upd985xx.cdl
description "A device driver for the NEC uPD985xx on-chip USB device"
}
package CYGPKG_NET {
alias { "Networking" net }
directory net/common
script net.cdl
description "Generic networking support, including TCP/IP."
}
package CYGPKG_NET_OPENBSD_STACK {
alias { "OpenBSD Stack" openbsd_net }
directory net/tcpip
script openbsd_net.cdl
description "TCP/IP stack from OpenBSD."
}
package CYGPKG_NET_FREEBSD_STACK {
alias { "FreeBSD Stack" freebsd_net }
directory net/bsd_tcpip
script freebsd_net.cdl
description "TCP/IP stack from FreeBSD, including KAME IPv6."
}
package CYGPKG_NET_FTPCLIENT {
alias { "FTP Client" ftpclient }
directory net/ftpclient
script ftpclient.cdl
description "FTP client support for get and put of files."
}
package CYGPKG_SNMPLIB {
alias { "SNMP library" snmplib }
directory net/snmp/lib
script snmplib.cdl
description "UCD SNMP library."
}
package CYGPKG_SNMPAGENT {
alias { "SNMP agent" snmpagent }
directory net/snmp/agent
script snmpagent.cdl
description "UCD SNMP agent."
}
package CYGPKG_HTTPD {
alias { "HTTP server" httpd }
directory net/httpd
script httpd.cdl
description "HTTP server."
}
package CYGPKG_NS_DNS {
alias { "DNS" dns }
directory net/ns/dns
script dns.cdl
description "DNS client support."
}
package CYGPKG_DEVS_ETH_ARM_EDB7XXX {
alias { "Cirrus Logic ethernet driver for EP7xxx boards" edb7xxx_eth_driver }
hardware
directory devs/eth/arm/edb7xxx
script edb7xxx_eth_drivers.cdl
description "Ethernet driver for Cirrus Logic EP7xxx based
development boards."
}
package CYGPKG_DEVS_ETH_ARM_KS32C5000 {
alias { "Samsung KS32C5000 ethernet driver" eth_ks32c5000 }
directory devs/eth/arm/ks32c5000
script ks32c5000_eth.cdl
description "Ethernet driver for Samsung ks32c5000/S3c4510."
}
package CYGPKG_DEVS_ETH_ARM_AAED2000 {
alias { "Ethernet driver for Agilent AAED2000 board" aaed2000_eth_driver }
hardware
directory devs/eth/arm/aaed2000
script aaed2000_eth_drivers.cdl
description "Ethernet driver for Agilent AAED2000
development boards."
}
package CYGPKG_DEVS_ETH_AMD_PCNET {
alias { "AMD PCNET ethernet driver" pcnet_eth_driver }
hardware
directory devs/eth/amd/pcnet
script amd_pcnet_eth_drivers.cdl
description "Ethernet driver for AMD PCNET controller."
}
package CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA {
alias { "MIPS Malta board ethernet driver" malta_eth_driver }
hardware
directory devs/eth/mips/malta
script mips_mips32_malta_eth_drivers.cdl
description "Ethernet driver for MIPS Malta board."
}
package CYGPKG_DEVS_ETH_MN10300_ASB2305 {
alias { "MN10300 ASB2305 board ethernet driver" asb2305_eth_driver }
hardware
directory devs/eth/mn10300/asb2305
script mn10300_asb2305_eth.cdl
description "Ethernet driver for MN10300 ASB2305 board."
}
package CYGPKG_DEVS_ETH_VIA_RHINE {
alias { "VIA Rhine ethernet driver" rhine_eth_driver }
hardware
directory devs/eth/via/rhine
script via_rhine_eth_drivers.cdl
description "Ethernet driver for VIA Rhine controller."
}
package CYGPKG_DEVS_ETH_SH_HS7729PCI {
alias { "HS7729PCI ethernet driver" hs7729pci_eth_driver }
hardware
directory devs/eth/sh/hs7729pci
script sh_hs7729pci_eth_drivers.cdl
description "Ethernet driver for HS7729PCI development boards."
}
package CYGPKG_DEVS_ETH_SH_SE77X9 {
alias { "SE77X9 ethernet driver" se77x9_eth_driver }
hardware
directory devs/eth/sh/se77x9
script sh_se77x9_eth_drivers.cdl
description "Ethernet driver for SE77x9 development boards."
}
package CYGPKG_DEVS_ETH_SH_SE7751 {
alias { "SE7751 ethernet driver" se7751_eth_driver }
hardware
directory devs/eth/sh/se7751
script sh_se7751_eth_drivers.cdl
description "Ethernet driver for SE7751 board."
}
package CYGPKG_DEVS_ETH_SH_ETHERC {
alias { "SH2 etherc driver" etherc_eth_driver }
hardware
directory devs/eth/sh/etherc
script sh_etherc_eth_drivers.cdl
description "Ethernet driver for SH2 etherc controller."
}
package CYGPKG_DEVS_ETH_ARM_EBSA285 {
alias { "Intel EBSA285 with PRO/100+ ethernet driver"
devs_eth_arm_ebsa285 ebsa285_eth_driver }
hardware
directory devs/eth/arm/ebsa285
script ebsa285_eth_drivers.cdl
description "Ethernet driver for Intel EBSA285 with PRO/100+ boards."
}
package CYGPKG_DEVS_ETH_ARM_FLEXANET {
alias { "SA11x0/Flexanet onboard ethernet support" devs_eth_arm_flexanet }
hardware
directory devs/eth/arm/flexanet
script flexanet_eth_drivers.cdl
description "This package contains hardware support for onboard SMC91C96
ethernet device on the Flexanet board."
}
package CYGPKG_DEVS_ETH_ARM_INNOVATOR {
alias { "OMAP Innovator onboard ethernet support" devs_eth_arm_innovator }
hardware
directory devs/eth/arm/innovator
script innovator_eth_drivers.cdl
description "This package contains hardware support for onboard SMC91C96
ethernet device on the Innovator board."
}
package CYGPKG_DEVS_ETH_ARM_INTEGRATOR {
alias { "ARM INTEGRATOR with Intel PRO/100+ ethernet driver"
devs_eth_arm_integrator integrator_eth_driver }
hardware
directory devs/eth/arm/integrator
script integrator_eth_drivers.cdl
description "Ethernet driver for Intel PRO/100+ boards on ARM INTEGRATOR."
}
package CYGPKG_DEVS_ETH_POWERPC_QUICC {
alias { "QUICC ethernet driver" quicc_eth_driver }
hardware
directory devs/eth/powerpc/quicc
script quicc_eth_drivers.cdl
description "Ethernet driver for PowerPC QUICC (MPC8xx) based boards."
}
package CYGPKG_DEVS_ETH_POWERPC_MBX {
alias { "MBX ethernet driver specifics" mbx_eth_driver }
hardware
directory devs/eth/powerpc/mbx
script mbx_eth_drivers.cdl
description "Ethernet driver specifics for Motorola MBX PowerPC (MPC8xx) based boards."
}
package CYGPKG_DEVS_ETH_POWERPC_QUICC2 {
alias { "QUICC2 ethernet driver" quicc_eth_driver }
hardware
directory devs/eth/powerpc/quicc2
script quicc2_eth_drivers.cdl
description "Fast ethernet driver for PowerPC QUICC2 (MPC8260) based boards."
}
package CYGPKG_DEVS_ETH_POWERPC_FEC {
alias { "FEC ethernet driver" fec_eth_driver }
hardware
directory devs/eth/powerpc/fec
script fec_eth_drivers.cdl
description "Ethernet driver for PowerPC FEC (MPC8xxT) based boards."
}
package CYGPKG_DEVS_ETH_POWERPC_VIPER {
alias { "A&M Viper ethernet driver" viper_eth_driver }
hardware
directory devs/eth/powerpc/viper
script viper_eth_drivers.cdl
description "Ethernet driver specifics for A&M Viper (MPC8xxT) based boards."
}
package CYGPKG_DEVS_ETH_POWERPC_ADDER {
alias { "A&M Adder ethernet driver" adder_eth_driver }
hardware
directory devs/eth/powerpc/adder
script adder_eth_drivers.cdl
description "Ethernet driver specifics for A&M Adder (MPC85x) based boards."
}
package CYGPKG_DEVS_ETH_INTEL_I82559 {
alias { "Intel 82559 ethernet driver"
devs_eth_intel_i82559 i82559_eth_driver }
hardware
directory devs/eth/intel/i82559
script intel_i82559_eth_drivers.cdl
description "Ethernet driver for Intel 82559 NIC."
}
package CYGPKG_DEVS_ETH_INTEL_I82544 {
alias { "Intel 82544 ethernet driver"
devs_eth_intel_i82544 i82544_eth_driver }
hardware
directory devs/eth/intel/i82544
script intel_i82544_eth_drivers.cdl
description "Ethernet driver for Intel 82544 NIC."
}
package CYGPKG_DEVS_ETH_INTEL_I21143 {
alias { "Intel 21143 ethernet driver"
devs_eth_intel_i21143 i21143_eth_driver }
hardware
directory devs/eth/intel/i21143
script intel_i21143_eth_drivers.cdl
description "Ethernet driver for Intel \[DEC\] 21143 NIC."
}
package CYGPKG_DEVS_ETH_MIPS_VRC4375 {
alias { "NEC MIPS VRC4375 ethernet driver"
devs_eth_mips_vrc4375 vrc4375_eth_driver }
hardware
directory devs/eth/mips/vrc4375
script vrc4375_eth_drivers.cdl
description "Ethernet driver for NEC MIPS VRC4375 'Blue Nile'
board with Intel \[ex Digital Equipment\]
i21143 ethernet interface."
}
package CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT {
alias { "Ocelot ethernet drivers"
devs_eth_mips_rm7000_ocelot ocelot_eth_driver }
hardware
directory devs/eth/mips/ocelot
script mips_rm7000_ocelot_eth_drivers.cdl
description "Ethernet driver for PMC-Sierra Ocelot board."
}
package CYGPKG_DEVS_ETH_ARM_IQ80321 {
alias { "Intel IQ80321 with onboard 82544 ethernet driver"
devs_eth_arm_iq80321 iq80321_eth_driver }
hardware
directory devs/eth/arm/iq80321
script iq80321_eth_drivers.cdl
description "Ethernet driver for Intel IQ80321 with onboard 82544 NIC."
}
package CYGPKG_DEVS_ETH_ARM_XSCALE_IQ80310 {
alias { "Intel IQ80310 with onboard 82559 ethernet driver"
devs_eth_arm_iq80310 iq80310_eth_driver }
hardware
directory devs/eth/arm/iq80310
script iq80310_eth_drivers.cdl
description "Ethernet driver for Intel IQ80310 with onboard 82559 NIC."
}
package CYGPKG_DEVS_ETH_I386_PC_I82559 {
alias { "Standard PC with EtherPro 10/100 ethernet device"
devs_eth_i386_pc_i82559 pc_etherpro }
hardware
directory devs/eth/i386/pc/i82559
script i386_pc_i82559_eth_drivers.cdl
description "Ethernet driver for standard PC with Intel 82559 NIC. This is
essentially support for a EtherPro 10/100 PCI card."
}
package CYGPKG_DEVS_ETH_I386_PC_I82544 {
alias { "Standard PC with Intel Gigabit ethernet device"
devs_eth_i386_pc_i82544 pc_ether_giga }
hardware
directory devs/eth/i386/pc/i82544
script i386_pc_i82544_eth_drivers.cdl
description "Ethernet driver for standard PC with Intel 82544 Gigabit NIC."
}
package CYGPKG_DEVS_ETH_MIPS_ATLAS {
alias { "MIPS Atlas with onboard SAA9730 ethernet driver"
devs_eth_mips_atlas atlas_eth_driver }
hardware
directory devs/eth/mips/atlas
script atlas_eth_drivers.cdl
description "Ethernet driver for MIPS Atlas with onboard SAA9730 NIC."
}
package CYGPKG_DEVS_ETH_NS_DP83902A {
alias { "NS DP83902A ethernet driver" dp83902a_eth_driver }
hardware
directory devs/eth/ns/dp83902a
script ns_dp83902a_eth_drivers.cdl
description "Ethernet driver for NS DP83902A controller."
}
package CYGPKG_DEVS_ETH_CL_CS8900A {
alias { "Cirrus Logic CS8900A ethernet driver" cs8900a_eth_driver }
hardware
directory devs/eth/cl/cs8900a
script cl_cs8900a_eth_drivers.cdl
description "Ethernet driver for Cirrus Logic CS8900A controller."
}
package CYGPKG_DEVS_ETH_MIPS_UPD985XX {
alias { "NEC uPD985xx ethernet driver" uPD985xx_eth_driver }
hardware
directory devs/eth/mips/upd985xx
script upd985xx_eth_drivers.cdl
description "NEC uPD985xx ethernet driver"
}
package CYGPKG_DEVS_ETH_MIPS_REFIDT334 {
alias { "MIPS IDT 79RC32334 reference platform ethernet driver"
devs_eth_refidt334 refidt334_eth_driver }
hardware
directory devs/eth/mips/idt79s334a
script refidt334_eth_drivers.cdl
description "Ethernet driver for MIPS IDT 79RC32334 reference platform."
}
# Not sure whether this should be "hardware"; if so, it should be mentioned
# in all targets that can use it.
package CYGPKG_DEVS_ETH_CF {
alias { "PCMCIA (Compact Flash) ethernet drivers" cf_eth_drivers }
directory devs/eth/cf
script cf_eth_drivers.cdl
hardware
description "Ethernet drivers for PCMCIA (Compact Flash) cardss."
}
package CYGPKG_DEVS_ETH_H8300_AKI3068NET {
alias { "Akizuki H8/3068 Board ethernet driver" aki3068net_eth_drivers }
directory devs/eth/h8300/aki3068net
script h8300_aki3068net_eth_drivers.cdl
hardware
description "Ethernet drivers for Akizuki H8/3068 Network
micom board."
}
package CYGPKG_DEVS_ETH_MCF5272 {
alias { "MCF5272 Fast Ethernet Controller driver" mcf5272_eth_driver}
hardware
directory devs/eth/mcf52xx/mcf5272
script mcf5272_eth_driver.cdl
description "Ethernet driver for the MCF5272."
}
package CYGPKG_DEVS_ETH_ECOSYNTH {
alias { "Synthetic target ethernet driver" ecosyntheth ecosynth_eth_driver }
directory devs/eth/synth/ecosynth
script syntheth.cdl
hardware
description "Ethernet driver for the synthetic target"
}
package CYGPKG_IO_PCI {
alias { "PCI configuration library" io_pci }
directory io/pci
script io_pci.cdl
hardware
description "
This package contains the PCI configuration library."
}
package CYGPKG_IO_WALLCLOCK {
alias { "Wallclock device framework" wallclock io_wallclock devices_wallclock device_wallclock }
directory io/wallclock
script wallclock.cdl
description "
This package provides a wallclock device framework. It is
also necessary to select an actual driver implementation."
}
package CYGPKG_DEVICES_WALLCLOCK_SH3 {
alias { "Wallclock driver for SH3 RTC module" devices_wallclock_sh3 device_wallclock_sh3 }
directory devs/wallclock/sh/sh3
script wallclock_sh3.cdl
hardware
description "
This package provides a wallclock driver implementation for the
Hitachi SH3 CPU's RTC module."
}
package CYGPKG_DEVICES_WALLCLOCK_MPC5xx {
alias { "Wallclock driver for mpc5xx RTC module" devices_wallclock_mpc5xx device_wallclock_mpc5xx }
directory devs/wallclock/powerpc/mpc5xx
script wallclock_mpc5xx.cdl
hardware
description "
This package provides a wallclock driver implementation for the
Motorola mpc5xx CPU's RTC module."
}
package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1742 {
alias { "Wallclock driver for Dallas 1742" devices_wallclock_ds1742 device_wallclock_ds1742 }
directory devs/wallclock/dallas/ds1742
script wallclock_ds1742.cdl
hardware
description "
This package provides a driver implementation for
the Dallas 1742 wallclock."
}
package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887 {
alias { "Wallclock driver for Dallas 12887" devices_wallclock_ds12887 device_wallclock_ds12887 }
directory devs/wallclock/dallas/ds12887
script wallclock_ds12887.cdl
hardware
description "
This package provides a driver implementation for
the Dallas 12887 wallclock."
}
package CYGPKG_DEVICES_WALLCLOCK_MIPS_REF4955 {
alias { "Wallclock driver for REF4955 board" devices_wallclock_ref4955 device_wallclock_ref4955 }
directory devs/wallclock/mips/ref4955
script wallclock_ref4955.cdl
hardware
description "
This package provides a wallclock driver implementation for the
Toshiba REF4955 board."
}
package CYGPKG_DEVICES_WALLCLOCK_I386_PC {
alias { "Standard PC RTC device" devs_wallclock_i386_pc_ds12887 pc_rtc }
hardware
directory devs/wallclock/i386/pc
script i386_pc_wallclock_drivers.cdl
description "
RTC driver for standard PC. This is essentially support for a
Dallas DS12887 RTC."
}
package CYGPKG_DEVICES_WALLCLOCK_SH_HS7729PCI {
alias { "Wallclock driver for HS7729PCI board" devices_wallclock_hs7729pci device_wallclock_hs7729pci }
directory devs/wallclock/sh/hs7729pci
script wallclock_hs7729pci.cdl
hardware
description "
This package provides a wallclock driver implementation for the
Hitachi HS7729PCI board."
}
package CYGPKG_DEVICES_WATCHDOG_ARM_AEB {
alias { "Watchdog driver for ARM/AEB board" devices_watchdog_aeb device_watchdog_aeb }
directory devs/watchdog/arm/aeb
script watchdog_aeb.cdl
hardware
description "
This package provides a watchdog driver implementation for the
ARM/AEB board."
}
package CYGPKG_DEVICES_WATCHDOG_ARM_AT91 {
alias { "Watchdog driver for ARM AT91 CPU" devices_watchdog_at91 device_watchdog_at91 }
directory devs/watchdog/arm/at91
script watchdog_at91.cdl
hardware
description "
This package provides a watchdog driver implementation for the
ARM AT91 CPU."
}
package CYGPKG_DEVICES_WATCHDOG_ARM_EBSA285 {
alias { "Watchdog driver for ARM/EBSA285 board" devices_watchdog_ebsa285 device_watchdog_ebsa285 }
directory devs/watchdog/arm/ebsa285
script watchdog_ebsa285.cdl
hardware
description "
This package provides a watchdog driver implementation for the
ARM/EBSA285 board."
}
package CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0 {
alias { "Watchdog driver for StrongARM SA11x0 devices" devices_watchdog_sa11x0 device_watchdog_sa11x0 }
directory devs/watchdog/arm/sa11x0
script watchdog_sa11x0.cdl
hardware
description "
This package provides a watchdog driver implementation for
Intel StrongARM SA11x0 integrated devices."
}
package CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300 {
alias { "Watchdog driver for MN10300 chip" devices_watchdog_mn10300 device_watchdog_mn10300 }
directory devs/watchdog/mn10300/mn10300
script watchdog_mn10300.cdl
hardware
description "
This package provides a watchdog driver implementation for the
MN10300 chip."
}
package CYGPKG_DEVICES_WATCHDOG_SH_SH3 {
alias { "Watchdog driver for the Hitachi SH3 chip" devices_watchdog_sh3 device_watchdog_sh3 }
directory devs/watchdog/sh/sh3
script watchdog_sh3.cdl
hardware
description "
This package provides a watchdog driver implementation for the
Hitachi SH3 chip."
}
package CYGPKG_DEVICES_WATCHDOG_H8300_H8300H {
alias { "Watchdog driver for the Hitachi H8/300H chip" devices_watchdog_h8300h device_watchdog_h8300h }
directory devs/watchdog/h8300/h8300h
script watchdog_h8300h.cdl
hardware
description "
This package provides a watchdog driver implementation for the
Hitachi H8/300H chip."
}
package CYGPKG_DEVS_WATCHDOG_SYNTH {
alias { "Watchdog driver for the synthetic target" devices_watchdog_synth device_watchdog_synth }
directory devs/watchdog/synth
script synth_watchdog.cdl
hardware
description "
This package provides a watchdog driver for the eCos
synthetic target."
}
package CYGPKG_IO_WATCHDOG {
alias { "Watchdog IO device" watchdog io_watchdog }
directory io/watchdog
script watchdog.cdl
description "
This package provides a watchdog device."
}
package CYGPKG_KERNEL {
alias { "eCos kernel" kernel }
directory kernel
script kernel.cdl
description "
This package contains the core functionality of the eCos kernel. It
relies on functionality provided by various HAL packages and by the
eCos infrastructure. In turn the eCos kernel provides support for
other packages such as the device drivers and the uITRON compatibility
layer."
}
package CYGPKG_MEMALLOC {
alias { "Dynamic memory allocation" memalloc malloc }
directory services/memalloc/common
script memalloc.cdl
description "
This package provides memory allocator infrastructure required for
dynamic memory allocators, including the ISO standard malloc
interface. It also contains some sample implementations."
}
package CYGPKG_LOADER {
alias { "Dynamic loader" loader dload }
directory services/loader
script loader.cdl
description "
This package provides support for the dynamic executable and
library loader."
}
package CYGPKG_COMPRESS_ZLIB {
alias { "Zlib compress/decompress" zlib_compress compress_zlib zlib }
directory services/compress/zlib
script compress_zlib.cdl
description "
This package provides zlib compression and decompression support."
}
package CYGPKG_POWER {
alias { "Power Management support" power }
directory services/power/common
script power.cdl
description "
This package provides some generic support for power management."
}
package CYGPKG_CRC {
alias { "CRC support" crc }
directory services/crc
script crc.cdl
description "
This package provides support for CRC functions, including the
POSIX 1003 defined CRC algorithm."
}
package CYGPKG_CPULOAD {
alias { "cpuload support" cpuload }
directory services/cpuload
script cpuload.cdl
description "
This package measures the CPU load over the last 100ms, 1second
and 10 second. All loads are returned as a percentage, ie 0-100.
This is only a rough measure."
}
package CYGPKG_PROFILE_GPROF {
alias { "Application profile support" profile_gprof gprof_profile }
directory services/profile/gprof
script profile_gprof.cdl
description "
This package instruments applications to collect profiling data,
using a methodology compatible with the gprof utility."
}
package CYGPKG_UITRON {
alias { "uITRON compatibility" uitron }
directory compat/uitron
script uitron.cdl
description "
eCos supports a uITRON Compatibility Layer, providing full Level S
(Standard) compliance with Version 3.02 of the uITRON Standard, plus
many Level E (Extended) features. uITRON is the premier Japanese
embedded RTOS standard."
}
package CYGPKG_ISOINFRA {
alias { "ISO C and POSIX infrastructure" isoinfra }
directory isoinfra
script isoinfra.cdl
description "
eCos supports implementations of ISO C libraries and POSIX implementations.
This package provides infrastructure used by all such implementations."
}
package CYGPKG_POSIX {
alias { "POSIX compatibility" posix }
directory compat/posix
script posix.cdl
description "
This package enables compatibility with the ISO/IEEE 1003.1 POSIX
standard. This allows the user application to use a well known
standard API, and starts a thread to invoke the user function
main()"
}
package CYGPKG_LIBC {
alias { "C library" libc clib clibrary }
directory language/c/libc/common
script libc.cdl
description "
The packages under this package enable compatibility with the ISO C
standard - ISO/IEC 9899:1990. This allows the user application to use
well known standard C library functions, and in eCos starts a thread
to invoke the user function main(). This package is a top-level placeholder
to contain the implementations."
}
package CYGPKG_LIBC_I18N {
alias { "ISO C library internationalization" libc_i18n }
directory language/c/libc/i18n
script i18n.cdl
description "
This package provides internationalization functions specified by the
ISO C standard - ISO/IEC 9899:1990."
}
package CYGPKG_LIBC_SETJMP {
alias { "ISO C library non-local jumps" libc_setjmp }
directory language/c/libc/setjmp
script setjmp.cdl
description "
This package provides non-local jump functionality specified by the
ISO C standard - ISO/IEC 9899:1990."
}
package CYGPKG_LIBC_SIGNALS {
alias { "ISO C library signals" libc_signals }
directory language/c/libc/signals
script signals.cdl
description "
This component controls signal functionality, as implemented in
ISO/IEC 9899:1990 chapter 7.7 with the signal() and raise() functions.
As well as allowing a program to send itself signals, it is also
possible to cause hardware exceptions to be signalled to the program
in a similar way."
}
package CYGPKG_LIBC_STARTUP {
alias { "ISO environment startup/termination" libc_startup }
directory language/c/libc/startup
script startup.cdl
description "
This package manages the control of the
environment (in the general sense) that an
application would require for full ISO C / POSIX
compatibility, including a main() entry point
supplied with arguments and an environment
(as retrievable by the getenv() function).
It also includes at the other end of things,
what happens when main() returns or exit() is
called."
}
package CYGPKG_LIBC_STDIO {
alias { "ISO C library standard input/output functions" libc_stdio }
directory language/c/libc/stdio
script stdio.cdl
description "
This package provides standard input/output functions associated
with the header file <stdio.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
}
package CYGPKG_LIBC_STDLIB {
alias { "ISO C library general utility functions" libc_stdlib }
directory language/c/libc/stdlib
script stdlib.cdl
description "
This package provides general utility functions associated
with the header file <stdlib.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
}
package CYGPKG_LIBC_STRING {
alias { "ISO C library string functions" libc_string }
directory language/c/libc/string
script string.cdl
description "
This package provides string functions specified by the ISO C standard
- ISO/IEC 9899:1990."
}
package CYGPKG_LIBC_TIME {
alias { "ISO C library date/time functions" libc_time }
directory language/c/libc/time
script time.cdl
description "
This package provides date and time manipulation functionality specified
by the ISO C standard - ISO/IEC 9899:1990."
}
package CYGPKG_LIBM {
alias { "Math library" libm mathlib mathlibrary }
directory language/c/libm
script libm.cdl
description "
ISO standard floating point mathematical library containing many
useful functions for mathematical calculations."
}
package CYGPKG_ERROR {
alias { "Common error code support" error errors }
directory error
script error.cdl
description "
This package contains the common list of error and status codes. It is
held centrally to allow packages to interchange error codes and status
codes in a common way, rather than each package having its own
conventions for error/status reporting. The error codes are modelled
on the POSIX style naming e.g. EINVAL etc. This package also provides
the standard strerror() function to convert error codes to textual
representation, as well as an implementation of the errno idiom."
}
package CYGPKG_CYGMON {
alias { "CygMon support via eCos" cygmon }
directory cygmon
script cygmon.cdl
description "
This package supports the CygMon \[stand-alone debug monitor\]
using eCos as the underlying board support mechanism."
}
package CYGPKG_REDBOOT {
alias { "RedBoot, the Red Hat bootstrap" cygmon }
directory redboot
script redboot.cdl
description "
This package creates the RedBoot \[stand-alone bootstrap & debug monitor\]
using eCos as the underlying board support mechanism."
}
package CYGPKG_MICROWINDOWS {
alias { "Microwindows" mw }
directory services/gfx/mw
script microwindows.cdl
description "Microwindows."
}
package CYGPKG_HAL_SH_SH7750_DREAMCAST {
alias { "SEGA Dreamcast" hal_sh_dreamcast sh_dreamcast_hal }
directory hal/sh/dreamcast
script hal_sh_sh7750_dreamcast.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on SEGA Dreamcast."
}
# --------------------------------------------------------------------------
# ARM packages
package CYGPKG_HAL_ARM {
alias { "ARM common HAL" hal_arm arm_hal arm_arch_hal }
directory hal/arm/arch
script hal_arm.cdl
hardware
description "
The ARM architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}
package CYGPKG_HAL_ARM_PID {
alias { "ARM development board (PID)" hal_arm_pid arm_pid_hal }
directory hal/arm/pid
script hal_arm_pid.cdl
hardware
description "
The pid HAL package provides the support needed to run eCos on a ARM
PID eval board."
}
package CYGPKG_HAL_ARM_AEB {
alias { "ARM evaluation board (AEB-1)" hal_arm_aeb arm_aeb_hal }
directory hal/arm/aeb
script hal_arm_aeb.cdl
hardware
description "
The aeb HAL package provides the support needed to run eCos on a ARM
AEB-1 eval board."
}
package CYGPKG_HAL_ARM_E7T {
alias { "ARM Evaluator7T board (AEB-2)" hal_arm_e7t arm_e7t_hal }
directory hal/arm/e7t
script hal_arm_e7t.cdl
hardware
description "
The e7t HAL package provides the support needed to run eCos on a ARM
Evaluator7T board (aka the AEB-2)."
}
package CYGPKG_HAL_ARM_INTEGRATOR {
alias { "ARM development board (INTEGRATOR)" hal_arm_integrator arm_integrator_hal }
directory hal/arm/integrator
script hal_arm_integrator.cdl
hardware
description "
The INTEGRATOR HAL package provides the support needed to
run eCos on a ARM INTEGRATOR eval board."
}
package CYGPKG_HAL_ARM_AT91 {
alias { "Atmel evaluation board (EB40)" hal_arm_at91 arm_at91_hal }
directory hal/arm/at91
script hal_arm_at91.cdl
hardware
description "
The at91 HAL package provides the support needed to run eCos on an Atmel
evaluation board (EB40)."
}
package CYGPKG_HAL_ARM_EBSA285 {
alias { "Intel EBSA285 StrongARM board" hal_arm_ebsa285 arm_ebsa285_hal }
directory hal/arm/ebsa285
script hal_arm_ebsa285.cdl
hardware
description "
The EBSA285 HAL package provides the support needed to run
eCos on a Intel EBSA285 StrongARM eval board."
}
package CYGPKG_HAL_ARM_ARM9 {
alias { "ARM9 variant" hal_arm_arm9 }
directory hal/arm/arm9/var
script hal_arm_arm9.cdl
hardware
description "
The ARM9 HAL package provides the support needed to run
eCos on a ARM9 based systems."
}
package CYGPKG_HAL_ARM_ARM9_AAED2000 {
alias { "Agilent AAED2000 unit" hal_arm_arm9_aaed }
directory hal/arm/arm9/aaed2000
script hal_arm_arm9_aaed2000.cdl
hardware
description "
The AAED2000 HAL package provides the support needed to run
eCos on an Agilent AAED2000 board."
}
package CYGPKG_HAL_ARM_ARM9_EXCALIBUR {
alias { "Altera Excalibur ARM9 board" hal_arm_arm9_excalibur }
directory hal/arm/arm9/excalibur
script hal_arm_arm9_excalibur.cdl
hardware
description "
The Excalibur HAL package provides the support needed to run
eCos on an Altera Excalibur ARM9 board."
}
package CYGPKG_HAL_ARM_ARM9_INNOVATOR {
alias { "Innovator (ARM)" hal_arm_arm9_innovator }
directory hal/arm/arm9/innovator
script hal_arm_arm9_innovator.cdl
hardware
description "
The Innovator HAL package provides the support needed to run
RedBoot on the ARM processor of the Innovator.
NOTE: Full support for eCos is not provided yet. This HAL
contains only the minimum amount necessary to run RedBoot
on the Innovator. In particular, interrupts are not yet
supported. Watch this space for more details in the near
future."
}
package CYGPKG_HAL_ARM_SA11X0 {
alias { "Intel SA11X0 Chipset" hal_arm_sa11x0 }
directory hal/arm/sa11x0/var
script hal_arm_sa11x0.cdl
hardware
description "
The SA11X0 HAL package provides the support needed to run
eCos on a Intel StrongARM SA11X0 based systems."
}
package CYGPKG_HAL_ARM_SA11X0_ASSABET {
alias { "Intel SA1110 Assabet eval board" hal_arm_sa11x0_assabet }
directory hal/arm/sa11x0/assabet
script hal_arm_sa11x0_assabet.cdl
hardware
description "
The ASSABET HAL package provides the support needed to run
eCos on a Intel StrongARM SA1110 evaluation board (assabet)."
}
package CYGPKG_HAL_ARM_SA11X0_CERF {
alias { "Intrinsyc Cerf board" hal_arm_sa11x0_cerf }
directory hal/arm/sa11x0/cerf
script hal_arm_sa11x0_cerf.cdl
hardware
description "
The CERF HAL package provides the support needed to run
eCos on a Intrinsyc StrongARM SA1110 Cerf board."
}
package CYGPKG_HAL_ARM_SA11X0_CERFPDA {
alias { "Intrinsyc Cerfpda" hal_arm_sa11x0_cerfpda }
directory hal/arm/sa11x0/cerfpda
script hal_arm_sa11x0_cerfpda.cdl
hardware
description "
The CERFPDA HAL package provides the support needed to run
eCos on a Intrinsyc StrongARM SA1110 Cerfpda."
}
package CYGPKG_HAL_ARM_SA11X0_IPAQ {
alias { "Compaq iPAQ Pocket PC" hal_arm_sa11x0_ipaq }
directory hal/arm/sa11x0/ipaq
script hal_arm_sa11x0_ipaq.cdl
hardware
description "
The IPAQ HAL package provides the support needed to run
eCos on a Intel StrongARM SA1110 pocket PC (Compaq iPAQ)."
}
package CYGPKG_HAL_ARM_SA11X0_FLEXANET {
alias { "SA1110 Flexanet board" hal_arm_sa11x0_flexanet }
directory hal/arm/sa11x0/flexanet
script hal_arm_sa11x0_flexanet.cdl
hardware
description "
The FLEXANET HAL package provides the support needed to run
eCos on an SA1110 Flexanet board."
}
package CYGPKG_HAL_ARM_SNDS {
alias { "Samsung SNDS" hal_arm_snds arm_snds_hal}
directory hal/arm/snds
script hal_arm_snds.cdl
hardware
description "
The SNDS HAL package provides the support needed to run eCos on a
Samsung SNDS eval board"
}
package CYGPKG_DEVS_ETH_SMSC_LAN91CXX {
alias { "SMSC LAN91CXX ethernet driver" lan91cxx_eth_driver lan9000_eth_driver }
hardware
directory devs/eth/smsc/lan91cxx
script smsc_lan91cxx_eth_drivers.cdl
description "Ethernet driver for SMSC LAN91CXX (LAN9000) controller."
}
package CYGPKG_HAL_ARM_SA11X0_NANO {
alias { "Intel SA1110 nanoEngine eval board" hal_arm_sa11x0_nano }
directory hal/arm/sa11x0/nano
script hal_arm_sa11x0_nano.cdl
hardware
description "
The nanoEngine HAL package provides the support needed to run
eCos on the Bright Star Engineering nanoEngine StrongARM SA1110 board."
}
package CYGPKG_DEVS_ETH_ARM_NANO {
alias { "BSE nanoEngine with 82559 ethernet driver"
devs_eth_arm_nano nano_eth_driver }
hardware
directory devs/eth/arm/nano
script nano_eth_drivers.cdl
description "Ethernet driver for SA11x0 nanoEngine with Intel
i82559 ethernet interfaces."
}
package CYGPKG_HAL_ARM_SA11X0_BRUTUS {
alias { "Intel SA1100 Brutus eval board" hal_arm_sa11x0_brutus }
directory hal/arm/sa11x0/brutus
script hal_arm_sa11x0_brutus.cdl
hardware
description "
The BRUTUS HAL package provides the support needed to run
eCos on a Intel StrongARM SA1110 evaluation board (brutus)."
}
package CYGPKG_HAL_ARM_SA11X0_SA1100MM {
alias { "Intel SA1100 Multimedia eval board" hal_arm_sa11x0_sa1100mm }
directory hal/arm/sa11x0/sa1100mm
script hal_arm_sa11x0_sa1100mm.cdl
hardware
description "
The MULTIMEDIA HAL package provides the support needed to run
eCos on a Intel StrongARM SA1110 Multimedia evaluation board."
}
package CYGPKG_HAL_ARM_EDB7XXX {
alias { "Cirrus Logic ARM7 based development boards" hal_arm_edb7xxx arm_edb7xxx_hal }
directory hal/arm/edb7xxx
script hal_arm_edb7xxx.cdl
hardware
description "
The EDB7XXX HAL package provides the support needed to run eCos on Cirrus Logic CL-PS7111 and EP7xxx based development boards."
}
package CYGPKG_HAL_ARM_CMA230 {
alias { "Cogent CMA230/222 board" hal_arm_cma230 arm_cma230_hal }
directory hal/arm/cma230
script hal_arm_cma230.cdl
hardware
description "
The cma230 HAL package provides the support needed to run eCos on a Cogent
CMA230 (ARM7TDMI) or CMA222 (ARM710T) eval board."
}
package CYGPKG_HAL_ARM_XSCALE_CORE {
alias { "Intel XScale Core" hal_arm_xscale_core }
directory hal/arm/xscale/cores
script hal_arm_xscale_core.cdl
hardware
description "
The XScale core HAL package provides the support needed to run eCos
on all Intel XScale based systems."
}
package CYGPKG_HAL_ARM_XSCALE_IOP310 {
alias { "Intel IOP8310 (IQ80200/IQ80310) XScale chipset" hal_arm_iop310 arm_iop310_hal }
directory hal/arm/xscale/iop310
script hal_arm_xscale_iop310.cdl
hardware
description "
The IOP310 HAL package provides the support needed to run
eCos on a system using the Intel XScale IOP310 (IQ80200/80310) chipset."
}
package CYGPKG_HAL_ARM_XSCALE_IQ80310 {
alias { "Intel IQ80310 (Cyclone) eval board" hal_arm_xscale_iq80310 hal_arm_xscale_cyclone }
directory hal/arm/xscale/iq80310
script hal_arm_xscale_iq80310.cdl
hardware
description "
The IQ80310 HAL package provides the support needed to run
eCos on an Intel Cyclone evaluation board, utilizing an Intel XScale
IQ80200/80310 chipset."
}
package CYGPKG_HAL_ARM_XSCALE_NPWR {
alias { "NPWR Linux Engine" hal_arm_xscale_npwr }
directory hal/arm/xscale/npwr
script hal_arm_xscale_npwr.cdl
hardware
description "
The NPWR HAL package provides the support needed to run
eCos on a NPWR Linux Engine, utilizing an Intel XScale
IQ80200/80310 chipset."
}
package CYGPKG_DEVS_ETH_ARM_XSCALE_NPWR {
alias { "NPWR Linux Engine ethernet drivers" devs_eth_arm_xscale_npwr }
hardware
directory devs/eth/arm/npwr
script npwr_eth_drivers.cdl
description "Ethernet drivers for NPWR Linux Engine via 82544 NIC."
}
package CYGPKG_HAL_ARM_XSCALE_VERDE {
alias { "Intel XScale 80320 I/O Processor" hal_arm_xscale_verde }
directory hal/arm/xscale/verde
script hal_arm_xscale_verde.cdl
hardware
description "
The XSCALE HAL package provides the support needed to run
eCos on Intel 80320 based systems."
}
package CYGPKG_HAL_ARM_XSCALE_IQ80321 {
alias { "Intel XScale IQ80321 eval board" hal_arm_xscale_iq80321 }
directory hal/arm/xscale/iq80321
script hal_arm_xscale_iq80321.cdl
hardware
description "
The IQ80321 HAL package provides the support needed to run
eCos on an Intel XScale IQ80321 evaluation board."
}
package CYGPKG_HAL_ARM_XSCALE_PXA2X0 {
alias { "Intel PXA2X0" hal_arm_xscale_pxa2x0 }
directory hal/arm/xscale/pxa2x0
script hal_arm_xscale_pxa2x0.cdl
hardware
description "
The PXA2X0 HAL package provides the support needed to run
eCos on Intel PXA2X0 based systems."
}
package CYGPKG_HAL_ARM_XSCALE_MPC50 {
alias { "MICROPLEX Printer Controller 5.0" hal_arm_xscale_mpc50 }
directory hal/arm/xscale/mpc50
script hal_arm_xscale_mpc50.cdl
hardware
description "
The MPC50 HAL package provides the support needed to run
eCos on a MPC 5.0."
}
# --------------------------------------------------------------------------
# SH packages
package CYGPKG_HAL_SH {
alias { "SH common HAL" hal_sh sh_hal sh_arch_hal }
directory hal/sh/arch
script hal_sh.cdl
hardware
description "
The SH (SuperH) architecture HAL package provides generic
support for this processor architecture. It is also
necessary to select variant and target platform HAL
packages."
}
package CYGPKG_HAL_SH_SH2 {
alias { "SH2 architecture" hal_sh_sh2 }
directory hal/sh/sh2
script hal_sh_sh2.cdl
hardware
description "
The SH2 (SuperH 2) variant HAL package provides generic
support for SH2 variant CPUs."
}
package CYGPKG_HAL_SH_SH3 {
alias { "SH3 architecture" hal_sh_sh3 }
directory hal/sh/sh3
script hal_sh_sh3.cdl
hardware
description "
The SH3 (SuperH 3) variant HAL package provides generic
support for SH3 variant CPUs."
}
package CYGPKG_HAL_SH_SH4 {
alias { "SH4 architecture" hal_sh_sh4 }
directory hal/sh/sh4
script hal_sh_sh4.cdl
hardware
description "
The SH4 (SuperH 4) variant HAL package provides generic
support for SH4 variant CPUs."
}
package CYGPKG_HAL_SH_EDK7708 {
alias { "Hitachi SH7708 board" hal_sh_edk sh_edk_hal }
directory hal/sh/edk7708
script hal_sh_edk7708.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on a Hitachi SH3 EDK7708 board."
}
package CYGPKG_HAL_SH_SH7708_CQ7708 {
alias { "CqREEK SH7708 board" hal_sh_cq sh_cq_hal }
directory hal/sh/cq7708
script hal_sh_sh7708_cq7708.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on a CqREEK SH7708 board."
}
package CYGPKG_HAL_SH_SH7750_CQ7750 {
alias { "CqREEK SH7750 board" hal_sh_cqsh4 sh_cqsh4_hal }
directory hal/sh/cq7750
script hal_sh_sh7750_cq7750.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on a CqREEK SH7750 board."
}
package CYGPKG_HAL_SH_SH7729_HS7729PCI {
alias { "Hitachi HS7729PCI board" hal_sh_sh7729_hs7729pci sh_sh7729_hs7729pci_hal }
directory hal/sh/hs7729pci
script hal_sh_sh7729_hs7729pci.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on a Hitachi HS7729PCI board."
}
package CYGPKG_HAL_SH_SH77X9_SE77X9 {
alias { "Hitachi SE77x9 board" hal_sh_sh77x9_se77x9 sh_sh77x9_se77x9_hal }
directory hal/sh/se77x9
script hal_sh_sh77x9_se77x9.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on a Hitachi Solution Engine 77x9 board."
}
package CYGPKG_HAL_SH_SH7751_SE7751 {
alias { "Hitachi SE7751 board" hal_sh_sh7751_se7751 sh_sh7751_se7751_hal }
directory hal/sh/se7751
script hal_sh_sh7751_se7751.cdl
hardware
description "
This SH HAL package provides the support needed to run
eCos on a Hitachi Solution Engine 7751 board."
}
# --------------------------------------------------------------------------
# H8300 packages
package CYGPKG_HAL_H8300 {
alias { "Hitachi H8300 common HAL" hal_h8300 h8300_hal}
directory hal/h8300/arch
script hal_h8300.cdl
hardware
description "
The Hitachi H8/300 architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}
package CYGPKG_HAL_H8300_H8300H {
alias { "Hitachi H8300H variant HAL" hal_h8300h h8300h_hal}
directory hal/h8300/h8300h
script hal_h8300_h8300h.cdl
hardware
description "
The H8300H HAL package provides the support needed to run eCos on a Hitachi
H8/300H processor."
}
package CYGPKG_HAL_H8300_H8300H_SIM {
alias { "H8/300H simulator" hal_h8300h_sim h8300h_sim_hal }
directory hal/h8300/sim
script hal_h8300_h8300h_sim.cdl
hardware
description "
The minimal simulator HAL package is provided for use when
only a simple simulation of the processor architecture is
desired, as opposed to detailed simulation of any specific
board. In particular it is not possible to simulate any of
the I/O devices, so device drivers cannot be used."
}
package CYGPKG_HAL_H8300_H8300H_AKI3068NET {
alias { "Akizuki H8/3068 board" hal_h8300h_aki3068net h8300h_aki3068net_hal }
directory hal/h8300/aki3068net
script hal_h8300_h8300h_aki3068net.cdl
hardware
description "
The aki HAL package provides the support needed to run
eCos on a Akizuki H8/3068 Network micom board."
}
# ==========================================================================
# --------------------------------------------------------------------------
# i386 packages
package CYGPKG_HAL_I386 {
alias { "i386 common HAL" hal_i386 i386_hal i386_arch_hal }
directory hal/i386/arch
script hal_i386.cdl
hardware
description "
The i386 architecture HAL package provides generic
support for this processor architecture. It is also
necessary to select a specific target platform HAL
package."
}
package CYGPKG_HAL_I386_GENERIC {
alias { "i386 generic target" hal_i386_generic }
directory hal/i386/generic
script hal_i386_generic.cdl
hardware
description "
The i386 generic Target HAL package provides support
for generic IA32 processors, from the 80386 to the latest
Pentium/Athlon."
}
package CYGPKG_HAL_I386_PCMB {
alias { "i386 PC Motherboard" hal_i386_pcmb }
directory hal/i386/pcmb
script hal_i386_pcmb.cdl
hardware
description "
The i386 PC Motherboard HAL package provides the
support needed to run eCos binaries on a standard i386
PC motherboard. This is a support package for various
actual platform specific targets."
}
package CYGPKG_HAL_I386_PC {
alias { "i386 PC target" hal_i386_pc }
directory hal/i386/pc
script hal_i386_pc.cdl
hardware
description "
The i386 PC Target HAL package provides the
support needed to run eCos binaries on a standard i386
PC."
}
# --------------------------------------------------------------------------
# Synthetic target.
package CYGPKG_HAL_SYNTH {
alias { "Linux synthetic target" linux }
directory hal/synth/arch
script hal_synth.cdl
hardware
description "
The Linux Synthetic Target HAL package provides the
support needed to run eCos binaries on top of the i386
Linux kernel."
}
package CYGPKG_HAL_SYNTH_I386 {
alias { "Linux/i386 synthetic target" i386_linux }
directory hal/synth/i386linux
script hal_synth_i386.cdl
hardware
description "
i386 processor-specific support for the Linux synthetic target"
}
# --------------------------------------------------------------------------
# SPARClite packages
package CYGPKG_HAL_SPARCLITE {
alias { "SPARClite common HAL" hal_sparclite sparclite_hal sparclite_arch_hal }
directory hal/sparclite/arch
script hal_sparclite.cdl
hardware
description "
The SPARClite architecture HAL package provides generic support
for this processor architecture. It is also necessary to select
a specific target platform HAL package."
}
package CYGPKG_HAL_SPARCLITE_SLEB {
alias { "Fujitsu MB86800-MA01 board" hal_sparclite_sleb sparclite_sleb_hal }
directory hal/sparclite/sleb
script hal_sparclite_sleb.cdl
hardware
description "
The SPARClite evaluation board HAL package is provided for use
with the Fujitsu MB8683x boards."
}
package CYGPKG_HAL_SPARCLITE_SIM {
alias { "SPARClite simulator" hal_sparclite_sim sparclite_sim_hal }
directory hal/sparclite/sim
script hal_sparclite_sim.cdl
hardware
description "
The SPARClite simulator HAL package is provided for use
with the SPARClite simulator."
}
# --------------------------------------------------------------------------
# SPARC V7/V8 packages
package CYGPKG_HAL_SPARC {
alias { "SPARC V7/V8 common HAL" hal_sparc sparc_hal sparc_arch_hal }
directory hal/sparc/arch
script hal_sparc.cdl
hardware
description "
The SPARC V7/V8 architecture HAL package provides generic support
for this processor architecture. It is also necessary to select
a specific target platform HAL package."
}
package CYGPKG_HAL_SPARC_ERC32 {
alias { "ERC32 processor" hal_sparc_erc32 sparc_erc32_hal }
directory hal/sparc/erc32
script hal_sparc_erc32.cdl
hardware
description "
The ERC32 processor HAL package is provided for use
with both real hardware and the TSIM/ERC32 simulator."
}
package CYGPKG_HAL_SPARC_LEON {
alias { "LEON processor" hal_sparc_leon sparc_leon_hal }
directory hal/sparc/leon
script hal_sparc_leon.cdl
hardware
description "
The LEON processor HAL package is provided for use
with both real hardware and the TSIM/LEON simulator."
}
# --------------------------------------------------------------------------
# PowerPC packages
package CYGPKG_HAL_POWERPC {
alias { "PowerPC common HAL" hal_powerpc powerpc_hal powerpc_arch_hal }
directory hal/powerpc/arch
script hal_powerpc.cdl
hardware
description "
The PowerPC architecture HAL package provides generic
support for this processor architecture. It is also necessary to
select a CPU variant and a specific target platform HAL
package."
}
package CYGPKG_HAL_POWERPC_MPC8260 {
alias { "PowerPC MPC8260 variant HAL" hal_mpc8260 }
directory hal/powerpc/mpc8260/
script hal_powerpc_mpc8260.cdl
hardware
description "
The PowerPC MPC8260 PowerQUICCII variant HAL package provides
support for this processor variant. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_POWERPC_MPC8xx {
alias { "PowerPC 8xx variant HAL" hal_mpc8xx mpc8xx_hal mpc8xx_arch_hal }
directory hal/powerpc/mpc8xx/
script hal_powerpc_mpc8xx.cdl
hardware
description "
The PowerPC 8xx variant HAL package provides generic support
for this processor variant. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_POWERPC_PPC60x {
alias { "PowerPC 60x variant HAL" hal_ppc60x ppc60x_hal ppc60x_arch_hal }
directory hal/powerpc/ppc60x/
script hal_powerpc_ppc60x.cdl
hardware
description "
The PowerPC 60x variant HAL package provides generic support
for this processor variant. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_POWERPC_MPC5xx {
alias { "PowerPC 5xx variant HAL" hal_mpc5xx mpc5xx_hal mpc5xx_arch_hal }
directory hal/powerpc/mpc5xx/
script hal_powerpc_mpc5xx.cdl
hardware
description "
The PowerPC 5xx variant HAL package provides generic support
for this processor variant. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_POWERPC_PPC40x {
alias { "PowerPC 40x variant HAL" hal_ppc40x ppc40x_hal ppc40x_arch_hal }
directory hal/powerpc/ppc40x/
script hal_powerpc_ppc40x.cdl
hardware
description "
The PowerPC 40x variant HAL package provides generic support
for this processor variant. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_POWERPC_COGENT {
alias { "Cogent CMA286/287 board" hal_powerpc_cogent powerpc_cogent_hal }
directory hal/powerpc/cogent
script hal_powerpc_cogent.cdl
hardware
description "
The cogent HAL package provides the support needed to run
eCos on a Cogent board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_CME555 {
alias { "Axiom's CME555 evaluation board" hal_powerpc_cme555 powerpc_cme555_hal }
directory hal/powerpc/cme555
script hal_powerpc_cme555.cdl
hardware
description "
The CME555 HAL package provides the support needed to run
eCos on a CME555 evaluation board from Axiom Manufacturing."
}
package CYGPKG_HAL_POWERPC_EC555 {
alias { "Wuerz development board" hal_powerpc_ec555 powerpc_ec555_hal }
directory hal/powerpc/ec555
script hal_powerpc_ec555.cdl
hardware
description "
The EC555 HAL package provides the support needed to run
eCos on an EC555 development board from Wuerz elektronik."
}
package CYGPKG_HAL_POWERPC_FADS {
alias { "Motorola MPC8xxFADS board" hal_powerpc_fads powerpc_fads_hal }
directory hal/powerpc/fads
script hal_powerpc_fads.cdl
hardware
description "
The FADS HAL package provides the support needed to run
eCos on a Motorola FADS board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_MBX {
alias { "Motorola MBX860/821 board" hal_powerpc_mbx powerpc_mbx_hal }
directory hal/powerpc/mbx
script hal_powerpc_mbx.cdl
hardware
description "
The MBX HAL package provides the support needed to run
eCos on a Motorola MBX board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_VIPER {
alias { "A&M Viper PPC860 board" hal_powerpc_viper powerpc_viper_hal }
directory hal/powerpc/viper
script hal_powerpc_viper.cdl
hardware
description "
The VIPER HAL package provides the support needed to run
eCos on a A&M VIPER board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_ADDER {
alias { "A&M Adder PPC85x board" hal_powerpc_adder powerpc_adder_hal }
directory hal/powerpc/adder
script hal_powerpc_adder.cdl
hardware
description "
The ADDER HAL package provides the support needed to run
eCos on a A&M ADDER board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_TS6 {
alias { "Delphi TigerSHARC-6 board" hal_powerpc_ts6 powerpc_ts6_hal }
directory hal/powerpc/ts6
script hal_powerpc_ts6.cdl
hardware
description "
The TS6 HAL package provides the support needed to run
eCos on a Delphi TigerSHARC-6 board equipped with a
PowerPC processor."
}
package CYGPKG_HAL_POWERPC_VADS {
alias { "Motorola MPC8260 VADS board" hal_powerpc_vads powerpc_vads_hal }
directory hal/powerpc/vads
script hal_powerpc_vads.cdl
hardware
description "
The VADS HAL package provides the support needed to run
eCos on a Motorola MPC8260 VADS board equipped with a
PowerPC processor."
}
package CYGPKG_HAL_QUICC {
alias { "Motorola MBX860/821 QUICC support" hal_quicc quicc_hal quicc }
directory hal/powerpc/quicc
script hal_powerpc_quicc.cdl
hardware
description "
The QUICC package provides some of the support needed
to run eCos on a Motorola MBX board, using the QUICC
feature of the MPC860 and MPC821 CPUs.
Currently only serial IO via SMC1 is provided by
this package."
}
package CYGPKG_HAL_POWERPC_SIM {
alias { "PowerPC simulator" hal_powerpc_sim powerpc_sim_hal }
directory hal/powerpc/sim
script hal_powerpc_sim.cdl
hardware
description "
The minimal simulator HAL package is provided for use when
only a simple simulation of the processor architecture is
desired, as opposed to detailed simulation of any specific
board. In particular it is not possible to simulate any of
the I/O devices, so device drivers cannot be used."
}
# --------------------------------------------------------------------------
# MIPS packages
package CYGPKG_HAL_MIPS {
alias { "MIPS common HAL" hal_mips mips_hal mips_arch_hal }
directory hal/mips/arch/
script hal_mips.cdl
hardware
description "
The MIPS architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a CPU variant and a specific target platform HAL
package."
}
package CYGPKG_HAL_MIPS_SIM {
alias { "MIPS simulator" hal_mips_sim mips_sim_hal }
directory hal/mips/sim
script hal_mips_sim.cdl
hardware
description "
The minimal simulator HAL package is provided for when only
a simple simulation of the processor architecture is
desired, as opposed to detailed simulation of any specific
board. To use this minimal simulator the command
`target sim --board=jmr3904pal' should be used from inside
gdb. It is not possible to use any of the eCos device
drivers when the simulator is running in this mode"
}
package CYGPKG_HAL_MIPS_TX39 {
alias { "TX39 chip HAL" hal_tx39 tx39_hal tx39_arch_hal }
directory hal/mips/tx39/
script hal_mips_tx39.cdl
hardware
description "
The TX39 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_TX39_JMR3904 {
alias { "Toshiba JMR-TX3904 board" hal_tx39_jmr3904 tx39_jmr3904_hal }
directory hal/mips/jmr3904
script hal_mips_tx39_jmr3904.cdl
hardware
description "
The JMR3904 HAL package should be used when targetting the
actual hardware. The same package can also be used when
running on the full simulator, since this provides an
accurate simulation of the hardware including I/O devices.
To use the simulator in this mode the command
`target sim --board=jmr3904' should be used from inside gdb."
}
package CYGPKG_HAL_MIPS_MIPS32 {
alias { "MIPS32 HAL" hal_mips32 mips32_hal mips32_arch_hal }
directory hal/mips/mips32/
script hal_mips_mips32.cdl
hardware
description "
The MIPS 32 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_MIPS64 {
alias { "MIPS64 HAL" hal_mips64 mips64_hal mips64_arch_hal }
directory hal/mips/mips64/
script hal_mips_mips64.cdl
hardware
description "
The MIPS 64 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_ATLAS {
alias { "MIPS Atlas board" hal_atlas atlas_hal }
directory hal/mips/atlas
script hal_mips_atlas.cdl
hardware
description "
The Atlas HAL package should be used when targetting the
actual hardware. "
}
package CYGPKG_HAL_MIPS_MALTA {
alias { "MIPS Malta board" hal_malta malta_hal }
directory hal/mips/malta
script hal_mips_malta.cdl
hardware
description "
The Malta HAL package should be used when targetting the
actual hardware. "
}
package CYGPKG_HAL_MIPS_TX49 {
alias { "TX49 chip HAL" hal_tx49 tx49_hal tx49_arch_hal }
directory hal/mips/tx49/
script hal_mips_tx49.cdl
hardware
description "
The TX49 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_TX49_REF4955 {
alias { "Toshiba TX4955 reference platform" hal_tx49_ref4955 tx49_ref4955_hal }
directory hal/mips/ref4955
script hal_mips_tx49_ref4955.cdl
hardware
description "
The REF4955 HAL package should be used when targetting the
actual hardware."
}
package CYGPKG_HAL_MIPS_RM7000 {
alias { "RM7000 chip HAL" hal_rm7000 rm7000_hal rm7000_arch_hal }
directory hal/mips/rm7000/var
script hal_mips_rm7000.cdl
hardware
description "
The RM7000 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_RM7000_OCELOT {
alias { "PMC-Sierra Ocelot platform" hal_rm7000_ocelot rm7000_ocelot_hal }
directory hal/mips/rm7000/ocelot
script hal_mips_rm7000_ocelot.cdl
hardware
description "
The Ocelot HAL package should be used when targetting the
actual hardware."
}
package CYGPKG_HAL_MIPS_VR4300 {
alias { "VR4300 chip HAL" hal_vr4300 vr4300_hal vr4300_arch_hal }
directory hal/mips/vr4300/
script hal_mips_vr4300.cdl
hardware
description "
The VR4300 variant HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_VR4300_VRC4373 {
alias { "NEC VRC4373 board" hal_vrc4373 vrc4373_hal }
directory hal/mips/vrc4373
script hal_mips_vr4300_vrc4373.cdl
hardware
description "
The VRC4373 HAL package should be used when targetting the
actual hardware."
}
package CYGPKG_HAL_MIPS_VR4300_VRC4375 {
alias { "NEC VRC4375 board" hal_vrc4375 vrc4375_hal }
directory hal/mips/vrc4375
script hal_mips_vr4300_vrc4375.cdl
hardware
description "
The VRC4375 HAL package should be used when targetting the
actual hardware."
}
package CYGPKG_HAL_MIPS_VR4300_VRC437X {
alias { "NEC VRC437X support" hal_vrc437x vrc437x_hal }
directory hal/mips/vrc437x
script hal_mips_vr4300_vrc437x.cdl
hardware
description "
The VRC437X HAL package should be used when targetting harware
that contains either a VRC437X companion chip."
}
package CYGPKG_HAL_MIPS_UPD985XX {
alias { "upd985xx chip HAL" hal_upd985xx upd985xx_hal upd985xx_arch_hal }
directory hal/mips/upd985xx/
script hal_mips_upd985xx.cdl
hardware
description "
The UPD985XX variant HAL package provides generic support
for this NEC system-on-chip processor architecture, uPD985xx.
It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_IDT32334 {
alias { "MIPS IDT32334 variant HAL" hal_idt32334 idt32334_hal idt32334_arch_hal }
directory hal/mips/idt32334
script hal_mips_idt32334.cdl
hardware
description "
The IDT32334 variant HAL package provides generic support
for platforms based on this variant. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_IDT32334_REFIDT334 {
alias { "MIPS IDT79S334A reference platform" hal_idt32334_refIDT334 idt32334_refIDT334_hal }
directory hal/mips/idt79s334a
script hal_mips_idt32334_refidt334.cdl
hardware
description "
The REFIDT334 HAL package should be used when targetting the
actual hardware."
}
# --------------------------------------------------------------------------
# MN10300 packages
package CYGPKG_HAL_MN10300 {
alias { "MN10300 common HAL" hal_mn10300 mn10300_hal mn10300_arch_hal }
directory hal/mn10300/arch
script hal_mn10300.cdl
hardware
description "
The MN10300 architecture HAL package provides generic
support for this processor architecture. It is also
necessary to select a specific target platform HAL
package."
}
package CYGPKG_HAL_MN10300_AM31 {
alias { "MN10300 AM31 variant HAL" hal_mn10300_am31 mn10300_am31_hal }
directory hal/mn10300/am31
script hal_mn10300_am31.cdl
hardware
description "
The MN10300 AM31 variant HAL package provides generic
support for this processor architecture. It is also
necessary to select a specific target platform HAL
package."
}
package CYGPKG_HAL_MN10300_AM31_SIM {
alias { "MN10300 simulator" hal_mn10300_sim mn10300_sim_hal }
directory hal/mn10300/sim
script hal_mn10300_am31_sim.cdl
hardware
description "
The minimal simulator HAL package is provided for use when
only a simple simulation of the processor architecture is
desired, as opposed to detailed simulation of any specific
board. In particular it is not possible to simulate any of
the I/O devices, so device drivers cannot be used."
}
package CYGPKG_HAL_MN10300_AM31_STDEVAL1 {
alias { "Matsushita stdeval1 board" hal_mn10300_stdeval1 mn10300_stdeval1_hal }
directory hal/mn10300/stdeval1
script hal_mn10300_am31_stdeval1.cdl
hardware
description "
The stdeval1 HAL package should be used when targetting the
actual hardware. The same package can also be used when
running on the full MN10300 simulator, since this provides
an accurate simulation of the full hardware including I/O
devices."
}
package CYGPKG_HAL_MN10300_AM33 {
alias { "MN10300 AM33 variant HAL" hal_mn10300_am33 mn10300_am33_hal }
directory hal/mn10300/am33
script hal_mn10300_am33.cdl
hardware
description "
The MN10300 AM33 variant HAL package provides generic
support for this processor architecture. It is also
necessary to select a specific target platform HAL
package."
}
package CYGPKG_HAL_MN10300_AM33_STB {
alias { "Matsushita STB board" hal_mn10300_am33_stb mn10300_am33_stb_hal }
directory hal/mn10300/stb
script hal_mn10300_am33_stb.cdl
hardware
description "
The STB HAL package should be used when targetting the
actual hardware for the AM33 STB evaluation board."
}
package CYGPKG_HAL_MN10300_AM33_ASB {
alias { "Matsushita ASB2303 board" hal_mn10300_am33_asb mn10300_am33_asb_hal }
directory hal/mn10300/asb
script hal_mn10300_am33_asb.cdl
hardware
description "
The ASB2303 HAL package should be used when targetting the
actual hardware for the AM33 ASB2303 evaluation board."
}
package CYGPKG_HAL_MN10300_AM33_ASB2305 {
alias { "Matsushita ASB2305 board" hal_mn10300_am33_asb2305
mn10300_am33_asb2305_hal }
directory hal/mn10300/asb2305
script hal_mn10300_am33_asb2305.cdl
hardware
description "
The ASB2305 HAL package should be used when targetting the
actual hardware for the AM33 ASB2305 evaluation board."
}
# --------------------------------------------------------------------------
# NEC packages
package CYGPKG_HAL_V85X {
alias { "NEC V85x common HAL" hal_v85x nec_arch_hal }
directory hal/v85x/arch
script hal_v85x.cdl
hardware
description "
The NEC V85x architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}
package CYGPKG_HAL_V85X_V850 {
alias { "NEC V850 variant HAL" hal_v85x_v850 nec_v850_hal }
directory hal/v85x/v850
script hal_v85x_v850.cdl
hardware
description "
The V850 HAL package provides the support needed to run eCos on a NEC V850
processor."
}
package CYGPKG_HAL_V85X_V850_CEB {
alias { "Cosmo CEB-V850/SA1 board" hal_v85x_v850_ceb nec_v850_ceb_hal }
directory hal/v85x/ceb_v850
script hal_v85x_ceb_v850.cdl
hardware
description "
The CEB-V850/SA1 HAL package provides the support needed to run eCos on a Cosmo CEB-V850/SA1
evaluation board."
}
# --------------------------------------------------------------------------
# m68k packages
package CYGPKG_HAL_M68K {
alias { "m68k common HAL" hal_m68k m68k_hal m68k_arch_hal }
directory hal/m68k/arch
script hal_m68k.cdl
hardware
description "The m68k architecture HAL package provides generic
support for this processor architecture. It is also
necessary to select a specific target platform HAL
package."
}
package CYGPKG_HAL_M68K_MCF52xx {
alias { "68k/Coldfire version 2 core variant HAL"
hal_m68k_mcf52xx
m68k_mcf52xx_hal }
directory hal/m68k/mcf52xx/var
script hal_m68k_mcf52xx.cdl
hardware
description "The 68k/Coldfire version 2 core variant HAL package
provides generic support for the version 2 Coldfire core.
It is also necessary to select a specific target platform
HAL package."
}
package CYGPKG_HAL_M68K_MCF52xx_MCF5272 {
alias { "mcf5272 68k/Coldfire processor variant HAL"
hal_m68k_mcf52xx_mcf5272
m68k_mcf52xx_mcf5272_hal }
directory hal/m68k/mcf52xx/mcf5272/proc
script hal_m68k_mcf52xx_mcf5272.cdl
hardware
description "The mcf5272 68k/Coldfire processor variant HAL package
provides generic support for this processor architecture.
It is also necessary to select a specific target platform
HAL package."
}
package CYGPKG_HAL_M68K_MCF52xx_MCF5272_MCF5272C3 {
alias { "Motorola mcf5272c3 evaluation board platform HAL"
hal_m68k_mcf52xx_mcf5272_mcf5272c3
m68k_mcf52xx_mcf5272_mcf5272c3_hal }
directory hal/m68k/mcf52xx/mcf5272/mcf5272c3/plf
script hal_m68k_mcf52xx_mcf5272_mcf5272c3.cdl
hardware
description "The Motorola mcf5272c3 evaluation board platform HAL
package should be used when targeting the actual hardware
for the Motorola mcf5272c3 evaluation board platform."
}
# --------------------------------------------------------------------------
# CalmRISC16 packages
package CYGPKG_HAL_CALM16 {
alias { "CalmRISC16 common HAL" hal_calm16 calm16_hal calm16_arch_hal }
directory hal/calmrisc16/arch/
script hal_calm16.cdl
hardware
description "
The CalmRISC16 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a CPU variant and a specific target platform HAL
package."
}
package CYGPKG_HAL_CALM16_CORE {
alias { "CORE HAL" hal_calm16core calm16core_hal calm16core_arch_hal }
directory hal/calmrisc16/core/
script hal_calm16_core.cdl
hardware
description "
The CalmRISC16 Core architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_CALM16_CEB {
alias { "Core eval board" hal_ceb ceb_hal }
directory hal/calmrisc16/ceb
script hal_calm16_ceb.cdl
hardware
description "
The CalmRISC16 HAL package should be used when targetting the
actual hardware. "
}
# --------------------------------------------------------------------------
# CalmRISC32 packages
package CYGPKG_HAL_CALM32 {
alias { "CalmRISC32 common HAL" hal_calm32 calm32_hal calm32_arch_hal }
directory hal/calmrisc32/arch/
script hal_calm32.cdl
hardware
description "
The CalmRISC32 architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a CPU variant and a specific target platform HAL
package."
}
package CYGPKG_HAL_CALM32_CORE {
alias { "CORE HAL" hal_calm32core calm32core_hal calm32core_arch_hal }
directory hal/calmrisc32/core/
script hal_calm32_core.cdl
hardware
description "
The CalmRISC32 Core architecture HAL package provides generic support
for this processor architecture. It is also necessary to
select a specific target platform HAL package."
}
package CYGPKG_HAL_CALM32_CEB {
alias { "Core eval board" hal_ceb ceb_hal }
directory hal/calmrisc32/ceb
script hal_calm32_ceb.cdl
hardware
description "
The CalmRISC32 HAL package should be used when targetting the
actual hardware. "
}
# --------------------------------------------------------------------------
# FUJITSU packages
package CYGPKG_HAL_FRV {
alias { "FR-V (Fujitsu) common HAL" hal_frv frv_hal frv_arch_hal }
directory hal/frv/arch
script hal_frv.cdl
hardware
description "
The FRV architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}
package CYGPKG_HAL_FRV_FRV400 {
alias { "FUJITSU development board (FR-V 400)" hal_frv_frv400 frv_frv400_hal }
directory hal/frv/frv400
script hal_frv_frv400.cdl
hardware
description "
The FRV400 HAL package provides the support needed to run eCos on a FUJITSU
MB93091 (FR-V 400) eval board."
}
package CYGPKG_DEVS_ETH_FRV_FRV400 {
alias { "Fujitsu FR-V 400 with 82559 ethernet driver"
devs_eth_frv_frv400 frv400_eth_driver }
hardware
directory devs/eth/frv/frv400
script frv400_eth_drivers.cdl
description "Ethernet driver for Fujitsu FR-V 400 with Intel
i82559 ethernet interfaces."
}
# --------------------------------------------------------------------------
# ==========================================================================
# --------------------------------------------------------------------------
# i386 targets
target pc {
alias { "i386 PC target" }
packages { CYGPKG_HAL_I386
CYGPKG_HAL_I386_GENERIC
CYGPKG_HAL_I386_PC
CYGPKG_HAL_I386_PCMB
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_I386_PC
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_I386_PC_I82559
CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
CYGPKG_DEVICES_WALLCLOCK_I386_PC
}
description "
The pc target provides the
packages needed to run eCos binaries on a standard i386
PC motherboard."
}
target pc_giga {
alias { "i386 PC target with Gigabit ethernet" }
packages { CYGPKG_HAL_I386
CYGPKG_HAL_I386_GENERIC
CYGPKG_HAL_I386_PC
CYGPKG_HAL_I386_PCMB
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_I386_PC
CYGPKG_DEVS_ETH_INTEL_I82544
CYGPKG_DEVS_ETH_I386_PC_I82544
CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
CYGPKG_DEVICES_WALLCLOCK_I386_PC
}
description "
The pc target provides the packages needed to run eCos binaries
on a standard i386 PC motherboard with an Intel 82543/82544 based
Gigabit ethernet interface."
}
# --------------------------------------------------------------------------
# FRV targets
target frv400 {
alias { "Fujitsu development board (FR-V 400)" FRV400 }
packages { CYGPKG_HAL_FRV
CYGPKG_HAL_FRV_FRV400
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_FRV_FRV400
CYGPKG_DEVS_ETH_NS_DP83902A
CYGPKG_DEVS_FLASH_FRV_FRV400
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
}
description "
The frv400 target provides the packages needed to run eCos on a Fujistu
development board (FR-V 400)."
}
# --------------------------------------------------------------------------
# ARM Targets
target pid {
alias { "ARM development board (PID)" PID }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_PID
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_ARM_PID
CYGPKG_DEVS_FLASH_ARM_PID
CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
}
description "
The pid target provides the packages needed to run eCos on an ARM
development board (formerly known as PID)."
}
target aeb {
alias { "ARM evaluation board (AEB-1)" aeb1 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_AEB
CYGPKG_IO_SERIAL_ARM_AEB
CYGPKG_DEVICES_WATCHDOG_ARM_AEB
}
description "
The aeb target provides the packages needed to run eCos on an ARM
evaluation board (AEB-1)."
}
target e7t {
alias { "ARM Evaluator7T board (AEB-2)" aeb2 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_E7T
CYGPKG_IO_SERIAL_ARM_E7T
}
description "
The e7t target provides the packages needed to run eCos on an ARM
Evaluator7T board (aka AEB-2)."
}
target integrator_arm7 {
alias { "ARM development board (INTEGRATOR) with ARM7TDMI" integrator }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_INTEGRATOR
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_ARM_INTEGRATOR
CYGPKG_DEVS_FLASH_INTEL_28FXXX
CYGPKG_DEVS_FLASH_ARM_INTEGRATOR
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_ARM_INTEGRATOR
}
description "
The INTEGRATOR_ARM7 target provides the packages needed to
run eCos on an ARM development board with an ARM7TDMI core
module installed."
}
target integrator_arm9 {
alias { "ARM development board (INTEGRATOR) with ARM966" }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_ARM9
CYGPKG_HAL_ARM_INTEGRATOR
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_ARM_INTEGRATOR
CYGPKG_DEVS_FLASH_INTEL_28FXXX
CYGPKG_DEVS_FLASH_ARM_INTEGRATOR
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_ARM_INTEGRATOR
}
description "
The INTEGRATOR_ARM9 target provides the packages needed to
run eCos on an ARM development board with an ARM966 core
module installed."
}
target at91 {
alias { "Atmel evaluation board (EB40)" eb40 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_AT91
CYGPKG_DEVS_FLASH_AT91
CYGPKG_IO_SERIAL_ARM_AT91
CYGPKG_DEVICES_WATCHDOG_ARM_AT91
}
description "
The aeb target provides the packages needed to run eCos on an Atmel
evaluation board (EB40)."
}
target ebsa285 {
alias { "Intel EBSA285 StrongARM board" ebsa }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_EBSA285
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_ARM_EBSA285
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_IO_SERIAL_ARM_EBSA285
CYGPKG_DEVICES_WATCHDOG_ARM_EBSA285
CYGPKG_DEVS_FLASH_EBSA285
}
description "
The ebsa285 target provides the packages needed to run
eCos on an Intel EBSA285 StrongARM board."
}
target aaed2000 {
alias { "Agilent AAED2000 unit" aaed }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_ARM9
CYGPKG_HAL_ARM_ARM9_AAED2000
CYGPKG_DEVS_FLASH_ARM_AAED2000
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_ETH_CL_CS8900A
CYGPKG_DEVS_ETH_ARM_AAED2000
CYGPKG_DEVS_KBD_AAED2000
CYGPKG_DEVS_TOUCH_AAED2000
}
description "
The AAED2000 target provides the packages needed to run
eCos on an Agilent AAED2000 board."
}
target excalibur_arm9 {
alias { "Altera ARM9/Excalibur board" excalibur_arm9 epxa10 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_ARM9
CYGPKG_HAL_ARM_ARM9_EXCALIBUR
CYGPKG_DEVS_FLASH_INTEL_28FXXX
CYGPKG_DEVS_FLASH_ARM_EXCALIBUR
}
description "
The Excalibur target provides the packages needed to run
eCos on an Altera Excalibur board."
}
target innovator {
alias { "Innovator (ARM) board" innovator }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_ARM9
CYGPKG_HAL_ARM_ARM9_INNOVATOR
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_FLASH_ARM_INNOVATOR
CYGPKG_DEVS_ETH_SMSC_LAN91CXX
CYGPKG_DEVS_ETH_ARM_INNOVATOR
}
description "
The Innovator HAL package provides the support needed to run
RedBoot on the ARM processor of the Innovator.
NOTE: Full support for eCos is not provided yet. This HAL
contains only the minimum amount necessary to run RedBoot
on the Innovator. In particular, interrupts are not yet
supported. Watch this space for more details in the near
future."
}
target assabet {
alias { "Intel StrongARM SA1110 board" assabet }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_ASSABET
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_PCMCIA_ASSABET
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_ASSABET
CYGPKG_IO_USB
CYGPKG_IO_USB_SLAVE
CYGPKG_DEVS_USB_SA11X0
CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
CYGPKG_DEVS_ETH_CF
CYGPKG_DEVS_ETH_NS_DP83902A
}
description "
The assabet target provides the packages needed to run
eCos on an Intel StrongARM SA1110 evaluation board."
}
target cerf {
alias { "Intrinsyc SA1110 Cerf board" cerf cerf_cube }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_CERF
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_PCMCIA_CERF
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_CERF
CYGPKG_IO_USB
CYGPKG_IO_USB_SLAVE
CYGPKG_DEVS_USB_SA11X0
CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
CYGPKG_DEVS_ETH_CF
CYGPKG_DEVS_ETH_ARM_CERF
CYGPKG_DEVS_ETH_CL_CS8900A
}
description "
The cerf target provides the packages needed to run
eCos on an Intrinsyc SA1110 Cerf board."
}
target cerfpda {
alias { "Intrinsyc SA1110 Cerfpda" cerf_pda }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_CERFPDA
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_ARM_CERFPDA
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_PCMCIA_CERFPDA
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_CERFPDA
CYGPKG_IO_USB
CYGPKG_IO_USB_SLAVE
CYGPKG_DEVS_USB_SA11X0
CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
CYGPKG_DEVS_ETH_CF
CYGPKG_DEVS_ETH_ARM_CERFPDA
CYGPKG_DEVS_ETH_CL_CS8900A
}
description "
The cerfpda target provides the packages needed to run
eCos on an Intrinsyc SA1110 cerfpda."
}
target ipaq {
alias { "Compaq iPAQ Pocket PC" ipaq }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_IPAQ
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_PCMCIA_IPAQ
CYGPKG_DEVS_FLASH_IPAQ
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
CYGPKG_DEVS_TOUCH_IPAQ
CYGPKG_DEVS_KBD_IPAQ
CYGPKG_DEVS_ETH_CF
CYGPKG_DEVS_ETH_NS_DP83902A
}
description "
The IPAQ target provides the packages needed to run
eCos on an Intel StrongARM SA1110 Pocket PC (Compaq iPAQ)."
}
target nano {
alias { "nanoEngine StrongARM SA1110 board" nano nanoEngine }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_NANO
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_FLASH_NANO
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_ARM_NANO
CYGPKG_DEVS_ETH_INTEL_I82559
}
description "
The nanoEngine target provides the packages needed to run
eCos on a Bright Star Engineering nanoEngine StrongARM SA1110 board."
}
target flexanet {
alias { "Flexanet StrongARM SA1110 platform" flexanet }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_FLEXANET
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_FLEXANET
CYGPKG_DEVS_ETH_SMSC_LAN91CXX
CYGPKG_DEVS_ETH_ARM_FLEXANET
CYGPKG_IO_USB
CYGPKG_IO_USB_SLAVE
CYGPKG_DEVS_USB_SA11X0
CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
}
description "
The Flexanet target provides the packages needed to run
eCos on an SA1110 Flexanet board."
}
target brutus {
alias { "Intel StrongARM SA1100 board" brutus }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_BRUTUS
CYGPKG_IO_SERIAL_ARM_SA11X0
}
description "
The brutus target provides the packages needed to run
eCos on an Intel StrongARM SA1100 evaluation board."
}
target sa1100mm {
alias { "Intel StrongARM SA1100 Multimedia board" sa1100mm }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SA11X0
CYGPKG_HAL_ARM_SA11X0_SA1100MM
CYGPKG_IO_SERIAL_ARM_SA11X0
CYGPKG_DEVS_FLASH_SA1100MM
}
description "
The sa1100mm target provides the packages needed to run
eCos on an Intel StrongARM SA1100 Multimedia evaluation board."
}
target iq80310 {
alias { "Intel IQ80310 XScale board" cyclone iq80310 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_XSCALE_CORE
CYGPKG_HAL_ARM_XSCALE_IOP310
CYGPKG_HAL_ARM_XSCALE_IQ80310
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_ARM_XSCALE_IQ80310
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310
CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310
}
description "
The iq80310 target provides the packages needed to run
eCos on a Cyclone IQ80310 board."
}
target npwr {
alias { "NPWR Linux Engine (Intel XScale)" npwr }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_XSCALE_CORE
CYGPKG_HAL_ARM_XSCALE_IOP310
CYGPKG_HAL_ARM_XSCALE_NPWR
CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310
CYGPKG_DEVS_ETH_INTEL_I82544
CYGPKG_DEVS_ETH_ARM_XSCALE_NPWR
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310
}
description "
The npwr target provides the packages needed to run
eCos on a NPWR Linux Engine."
}
target iq80321 {
alias { "Intel XScale IQ80321 Board" iq80321 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_XSCALE_CORE
CYGPKG_HAL_ARM_XSCALE_VERDE
CYGPKG_HAL_ARM_XSCALE_IQ80321
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_ARM_IQ80321
CYGPKG_DEVS_ETH_INTEL_I82544
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_IQ80321
CYGPKG_DEVS_ETH_ARM_IQ80321
}
description "
The IQ80321 target provides the packages needed to run
eCos on an Intel XScale IQ80321 board."
}
target edb7xxx {
alias { "Cirrus Logic EDB7xxx development board" edb7211 eb7xxx eb7211 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_EDB7XXX
CYGPKG_DEVS_ETH_ARM_EDB7XXX
CYGPKG_DEVS_ETH_CL_CS8900A
CYGPKG_IO_SERIAL_ARM_EDB7XXX
CYGPKG_DEVS_FLASH_EDB7XXX
}
description "
The edb7xxx target provides the packages needed to run eCos on the Cirrus Logic EDB7xxx development boards."
}
target cma230 {
alias { "Cogent CMA230/222 board" cma222 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_CMA230
CYGPKG_IO_SERIAL_ARM_CMA230
}
description "
The cma230 target provides the packages needed to run eCos on a Cogent
CMA230 (ARM7TDMI) or CMA222 (ARM710T) board."
}
target snds {
alias { "Samsung SNDS" SNDS snds snds100 }
packages { CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_SNDS
}
enable { CYGHWR_HAL_ARM_BIGENDIAN }
description "
The snds target provides the packages needed to run eCos on a
Samsung SNDS eval board."
}
target mpc50 {
alias { "MICROPLEX Printer Controller 5.0" mpc50 }
packages {
CYGPKG_HAL_ARM
CYGPKG_HAL_ARM_XSCALE_CORE
CYGPKG_HAL_ARM_XSCALE_PXA2X0
CYGPKG_HAL_ARM_XSCALE_MPC50
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_MPC50
}
description "
MICROPLEX Printer Controller 5.0"
}
# --------------------------------------------------------------------------
# SH targets
target sh7708 {
alias { "Hitachi EDK/SH7708 board" edk7708 }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH3
CYGPKG_HAL_SH_EDK7708
CYGPKG_DEVICES_WALLCLOCK_SH3
CYGPKG_IO_SERIAL_SH_SCI
CYGPKG_IO_SERIAL_SH_EDK7708
CYGPKG_DEVICES_WATCHDOG_SH_SH3
CYGPKG_DEVS_FLASH_SH_EDK7708
CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
}
description "
The sh7708 target provides the packages needed to run
eCos on a Hitachi EDK/SH7708 board."
}
target cq7708 {
alias { "CqREEK SH7708 board" cq7708 }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH3
CYGPKG_HAL_SH_SH7708_CQ7708
CYGPKG_IO_SERIAL_SH_SCI
CYGPKG_IO_SERIAL_SH_CQ7708
}
description "
The cq7708 target provides the packages needed to run
eCos on a CqREEK SH7708 board."
}
target cq7750 {
alias { "CqREEK SH7750 board" cqsh4 }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH4
CYGPKG_HAL_SH_SH7750_CQ7750
CYGPKG_DEVS_FLASH_CQ7750
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_SERIAL_SH_SCIF }
description "
The sh7750 target provides the packages needed to run
eCos on a CqREEK SH7750 board."
}
target hs7729pci {
alias { "Hitachi HS7729PCI board" hs7729 }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH3
CYGPKG_HAL_SH_SH7729_HS7729PCI
CYGPKG_DEVS_FLASH_SH_HS7729PCI
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_SH_HS7729PCI
CYGPKG_DEVS_ETH_VIA_RHINE
CYGPKG_DEVICES_WATCHDOG_SH_SH3
CYGPKG_DEVICES_WALLCLOCK_SH_HS7729PCI
CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
}
description "
The hs7729pci target provides the packages needed to run
eCos on a Hitachi HS7729PCI board."
}
target se77x9 {
alias { "Hitachi SE77x9 board" }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH3
CYGPKG_HAL_SH_SH77X9_SE77X9
CYGPKG_DEVS_FLASH_SH_SE77X9
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_ETH_NS_DP83902A
CYGPKG_DEVS_ETH_SH_SE77X9
CYGPKG_IO_SERIAL_SH_SE77X9
CYGPKG_IO_SERIAL_SH_SCIF
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_DEVICES_WATCHDOG_SH_SH3
}
description "
The se77x9 target provides the packages needed to run
eCos on a Hitachi Solution Engine 77x9 board."
}
target se7751 {
alias { "Hitachi SE7751 board" }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH4
CYGPKG_HAL_SH_SH7751_SE7751
CYGPKG_IO_PCI
CYGPKG_DEVS_FLASH_SH_SE7751
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_SERIAL_SH_SCIF
CYGPKG_DEVICES_WATCHDOG_SH_SH3
CYGPKG_DEVS_ETH_SH_SE7751
CYGPKG_DEVS_ETH_AMD_PCNET
}
description "
The se7751 target provides the packages needed to run
eCos on a Hitachi Solution Engine 7751 board."
}
target dreamcast {
alias { "SEGA Dreamcast" dreamcast }
packages { CYGPKG_HAL_SH
CYGPKG_HAL_SH_SH4
CYGPKG_HAL_SH_SH7750_DREAMCAST
CYGPKG_IO_PCI
CYGPKG_IO_SERIAL_SH_SCIF }
description "
The sh7750 target provides the packages needed to run
eCos on SEGA Dreamcast."
}
# --------------------------------------------------------------------------
# Synthetic targets.
target linux {
alias { "Linux synthetic target" i386linux }
packages { CYGPKG_HAL_SYNTH
CYGPKG_HAL_SYNTH_I386
CYGPKG_DEVS_FLASH_SYNTH
CYGPKG_DEVS_ETH_ECOSYNTH
CYGPKG_DEVS_WATCHDOG_SYNTH
}
description "
The linux target provides the
packages needed to run eCos binaries on top of the i386
Linux kernel."
}
# --------------------------------------------------------------------------
# SPARClite targets
target sleb {
alias { "Fujitsu MB86800-MA01 board" }
packages { CYGPKG_HAL_SPARCLITE
CYGPKG_HAL_SPARCLITE_SLEB
CYGPKG_IO_SERIAL_SPARCLITE_SLEB
}
description "
The sleb target provides the packages need to run eCos
on a Fujitsu MB86800-MA01 board."
}
target sparclite_sim {
alias { "SPARClite simulator" sl_sim sparcl_sim }
packages { CYGPKG_HAL_SPARCLITE
CYGPKG_HAL_SPARCLITE_SIM
}
description "
The sparclite_sim target provides the packages need to run eCos
on the SPARClite simulator."
}
# --------------------------------------------------------------------------
# SPARC V7/V8 targets
target sparc_erc32 {
alias { "ERC32 processor" erc32 }
packages { CYGPKG_HAL_SPARC
CYGPKG_HAL_SPARC_ERC32
}
description "
The sparc_erc32 target provides the packages need to run eCos
on the ERC32 processor or TSIM/ERC32 simulator."
}
target sparc_leon {
alias { "LEON processor" leon }
packages { CYGPKG_HAL_SPARC
CYGPKG_HAL_SPARC_LEON
}
description "
The sparc_leon target provides the packages need to run eCos
on the LEON processor or TSIM/LEON simulator."
}
# --------------------------------------------------------------------------
# PowerPC targets
target cme555 {
alias { "Axiom's CME555 board" cme555 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC5xx
CYGPKG_HAL_POWERPC_CME555
CYGPKG_DEVS_FLASH_CME555
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_SERIAL_POWERPC_CME555
CYGPKG_DEVICES_WALLCLOCK_MPC5xx
}
description "
The cme555 target provides the packages needed to run
eCos on a CME555 MPC555 evaluation board from Axiom
Manufacturing."
}
target ec555 {
alias { "Wuerz ec555" ec555 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC5xx
CYGPKG_HAL_POWERPC_EC555
CYGPKG_DEVS_FLASH_EC555
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_SERIAL_POWERPC_EC555
CYGPKG_DEVICES_WALLCLOCK_MPC5xx
}
description "
The ec555 target provides the packages needed to run
eCos on a EC555 MPC555 development board from Wuerz
elektronik."
}
target cma28x {
alias { "Cogent CMA286/287 board" cma286 cma287 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8xx
CYGPKG_HAL_POWERPC_COGENT
CYGPKG_IO_SERIAL_POWERPC_COGENT
}
description "
The cma28x target provides the packages needed to run
eCos on a Cogent CMA286 or CMA287 board."
}
target fads {
alias { "Motorola MPC8xxFADS board" }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8xx
CYGPKG_HAL_POWERPC_FADS
}
description "
The fads target provides the packages needed to run
eCos on a Motorola MPC8xxFADS board."
}
target mbx {
alias { "Motorola MBX860/821 board" mbx860 mbx821 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8xx
CYGPKG_HAL_POWERPC_MBX
CYGPKG_HAL_QUICC
CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
CYGPKG_DEVS_ETH_POWERPC_QUICC
CYGPKG_DEVS_ETH_POWERPC_MBX
CYGPKG_DEVS_FLASH_MBX
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
}
description "
The mbx target provides the packages needed to run
eCos on a Motorola MBX860 or MBX821 board."
}
target ts6 {
alias { "Delphi TigerSHARC-6 board" Pleiades sixpack }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8260
CYGPKG_HAL_POWERPC_TS6
CYGPKG_DEVS_ETH_POWERPC_QUICC2
CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC
CYGPKG_DEVS_FLASH_TS6
CYGPKG_DEVS_FLASH_INTEL_28FXXX
}
description "
The ts6 target provides the packages needed to run
eCos on a Delphi TigerSHARC-6 board."
}
target vads {
alias { "Motorola MPC8260 VADS board" }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8260
CYGPKG_HAL_POWERPC_VADS
CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC
CYGPKG_DEVS_ETH_POWERPC_QUICC2
CYGPKG_DEVS_FLASH_VADS
CYGPKG_DEVS_FLASH_INTEL_28FXXX
}
description "
The vads target provides the packages needed to run
eCos on a Motorola MPC8260 VADS board."
}
target viper {
alias { "A&M Viper PPC860 board" viper860 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8xx
CYGPKG_HAL_POWERPC_VIPER
CYGPKG_HAL_QUICC
CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
CYGPKG_DEVS_ETH_POWERPC_FEC
CYGPKG_DEVS_ETH_POWERPC_VIPER
CYGPKG_DEVS_FLASH_VIPER
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
}
description "
The viper target provides the packages needed to run
eCos on a A&M Viper PPC860 board."
}
target adder {
alias { "A&M Adder PPC850 board" adder850 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8xx
CYGPKG_HAL_POWERPC_ADDER
CYGPKG_HAL_QUICC
CYGPKG_DEVS_FLASH_POWERPC_ADDER
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_ETH_POWERPC_QUICC
CYGPKG_DEVS_ETH_POWERPC_ADDER
CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
}
description "
The adder target provides the packages needed to run
eCos on a A&M Adder PPC850 board."
}
target psim {
alias { "PowerPC simulator" ppc_sim powerpc_sim }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_PPC60x
CYGPKG_HAL_POWERPC_SIM
}
description "
The psim target provides the packages needed to run
eCos in the PSIM simulator."
}
##-------------------------------------------------------------------------------------------
## Cogent CSB281 (PowerPC 8245) packages
##
package CYGPKG_HAL_POWERPC_CSB281 {
alias { "Cogent PowerPC 8245 board" hal_powerpc_csb281 }
directory hal/powerpc/csb281
script hal_powerpc_csb281.cdl
hardware
description "
The CSB281 HAL package provides the support needed to run
eCos on a Cogent PowerPC 8245 board."
}
package CYGPKG_DEVS_FLASH_CSB281 {
alias { "FLASH memory support for Cogent PowerPC 8245 board" flash_csb281 }
directory devs/flash/powerpc/csb281
script flash_csb281.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Cogent CSB281 (PowerPC 8245) board."
}
package CYGPKG_DEVS_ETH_CSB281 {
alias { "Cogent CSB281 (PowerPC 8245) 82559 ethernet driver"
devs_eth_csb281 }
hardware
directory devs/eth/powerpc/csb281
script csb281_eth_drivers.cdl
description "Ethernet driver for Cogent CSB281 (PowerPC 8245)
with Intel i82559 ethernet interfaces."
}
target csb281 {
alias { "Cogent PowerPC 8245" cogent8245 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_PPC60x
CYGPKG_HAL_POWERPC_CSB281
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_CSB281
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_CSB281
CYGPKG_DEVS_ETH_INTEL_I82559
}
description "
The csb281 target provides the packages needed to run
eCos on the Cogent CSB281 (8245) board."
}
##-------------------------------------------------------------------------------------------
# --------------------------------------------------------------------------
# MIPS targets
target jmr3904 {
alias { "Toshiba JMR-TX3904 board" jmr tx39 }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_TX39
CYGPKG_HAL_MIPS_TX39_JMR3904
CYGPKG_IO_SERIAL_TX39_JMR3904
}
description "
The jmr3904 target provides the packages needed to run
eCos on a Toshiba JMR-TX3904 board. This target can also
be used when running in the full simulator, since the simulator provides an
accurate simulation of the hardware including I/O devices.
To use the simulator in this mode the command
`target sim --board=jmr3904' should be used from inside gdb."
}
target atlas_mips32_4kc {
alias { "MIPS Atlas board with Mips32 4Kc processor" atlas_mips32_4kc }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_MIPS32
CYGPKG_HAL_MIPS_ATLAS
CYGPKG_IO_SERIAL_MIPS_ATLAS
CYGPKG_DEVS_FLASH_ATLAS
CYGPKG_DEVS_ETH_MIPS_ATLAS
CYGPKG_IO_PCI
}
set_value CYGHWR_HAL_MIPS_MIPS32_CORE "4Kc"
description "
The atlas_mips32_4Kc target provides the packages needed to run
eCos on a MIPS Atlas board with a Mips32 4Kc processor."
}
target atlas_mips64_5kc {
alias { "MIPS Atlas board with Mips64 5Kc processor" atlas_mips64_5kc ruby }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_MIPS64
CYGPKG_HAL_MIPS_ATLAS
CYGPKG_IO_SERIAL_MIPS_ATLAS
CYGPKG_DEVS_FLASH_ATLAS
CYGPKG_DEVS_ETH_MIPS_ATLAS
}
set_value CYGHWR_HAL_MIPS_MIPS64_CORE "5K"
description "
The atlas_mips32_5Kc target provides the packages needed to run
eCos on a MIPS Atlas board with a Mips64 5Kc processor."
}
target malta_mips32_4kc {
alias { "MIPS Malta board with Mips32 4Kc processor" malta_mips32_4kc }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_MIPS32
CYGPKG_HAL_MIPS_MALTA
CYGPKG_DEVS_FLASH_INTEL_28FXXX
CYGPKG_DEVS_FLASH_MALTA
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_AMD_PCNET
CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA
}
set_value CYGHWR_HAL_MIPS_MIPS32_CORE "4Kc"
description "
The malta_mips32_4Kc target provides the packages needed to run
eCos on a MIPS Malta board with a Mips32 4Kc processor."
}
target malta_mips64_5kc {
alias { "MIPS Malta board with Mips64 5Kc processor" malta_mips64_5kc }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_MIPS64
CYGPKG_HAL_MIPS_MALTA
CYGPKG_DEVS_FLASH_INTEL_28FXXX
CYGPKG_DEVS_FLASH_MALTA
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_AMD_PCNET
CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA
}
set_value CYGHWR_HAL_MIPS_MIPS64_CORE "5K"
description "
The malta_mips64_5Kc target provides the packages needed to run
eCos on a MIPS Malta board with a Mips64 5Kc processor."
}
target tx39_sim {
alias { "TX39 minimal simulator" }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_TX39
CYGPKG_HAL_MIPS_SIM
}
description "
The tx39_sim target provides the packages needed to run
eCos in the TX39 minimal simulator. To use this minimal
simulator the command `target sim --board=jmr3904pal'
should be used from inside gdb. It is not possible to
use any of the eCos device drivers when the simulator
is running in this mode."
}
target ref4955 {
alias { "Toshiba TX4955 reference platform" tx49 }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_TX49
CYGPKG_HAL_MIPS_TX49_REF4955
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_MIPS_REF4955
CYGPKG_DEVICES_WALLCLOCK_MIPS_REF4955
CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1742
}
description "
The ref4955 target provides the packages needed to run
eCos on a Toshiba TX4955 reference platform."
}
target ocelot {
alias { "PMC-Sierra Ocelot platform" ocelot }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_RM7000
CYGPKG_HAL_MIPS_RM7000_OCELOT
CYGPKG_IO_PCI
CYGPKG_DEVS_FLASH_MIPS_OCELOT
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT
}
description "
The ocelot target provides the packages needed to run
eCos on a PMC-Sierra Ocelot Hot-Swap Computer."
}
target vrc4373 {
alias { "NEC VRC4373 board" }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_VR4300
CYGPKG_HAL_MIPS_VR4300_VRC4373
CYGPKG_HAL_MIPS_VR4300_VRC437X
CYGPKG_IO_SERIAL_MIPS_VRC437X
CYGPKG_DEVS_FLASH_MIPS_VRC437X
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_PCI
}
description "
The vrc4373 target provides the packages needed to run
eCos on an NEC VRC4373 board."
}
target vrc4375 {
alias { "NEC VRC4375 board" }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_VR4300
CYGPKG_HAL_MIPS_VR4300_VRC4375
CYGPKG_HAL_MIPS_VR4300_VRC437X
CYGPKG_IO_SERIAL_MIPS_VRC437X
CYGPKG_DEVS_FLASH_MIPS_VRC437X
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_INTEL_I21143
CYGPKG_DEVS_ETH_MIPS_VRC4375
}
description "
The vrc4375 target provides the packages needed to run
eCos on an NEC VRC4375 board."
}
target refidt334 {
alias { "MIPS IDT79S334A reference platform with IDT79RC32334 procesor" idt32334 }
packages { CYGPKG_HAL_MIPS
CYGPKG_HAL_MIPS_IDT32334
CYGPKG_HAL_MIPS_IDT32334_REFIDT334
CYGPKG_IO_PCI
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_MIPS_REFIDT334
CYGPKG_DEVS_FLASH_MIPS_REFIDT334
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_IO_SERIAL_MIPS_IDT79S334A
}
description "
The refidt334 target provides the packages needed to run
eCos on a MIPS IDT IDT79S334A reference board."
}
# --------------------------------------------------------------------------
# MN10300 targets
target am31_sim {
alias { "MN10300 AM31 minimal simulator" }
packages { CYGPKG_HAL_MN10300
CYGPKG_HAL_MN10300_AM31
CYGPKG_HAL_MN10300_AM31_SIM
}
description "
The am31_sim target provides the packages need to run
eCos in the MN10300 minimal simulator. It is not possible to
use any of the eCos device drivers when the simulator
is running in this mode."
}
target stdeval1 {
alias { "Matsushita stdeval1 board" }
packages { CYGPKG_HAL_MN10300
CYGPKG_HAL_MN10300_AM31_STDEVAL1
CYGPKG_HAL_MN10300_AM31
CYGPKG_IO_SERIAL_MN10300
CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300
}
description "
The stdeval1 target provides the packages needed to run
eCos on a Matsushita stdeval1 board. This target can also
be used when running in the full simulator, since the simulator provides an
accurate simulation of the hardware including I/O devices."
}
target stb {
alias { "Matsushita STB board" }
packages { CYGPKG_HAL_MN10300
CYGPKG_HAL_MN10300_AM33_STB
CYGPKG_HAL_MN10300_AM33
CYGPKG_IO_SERIAL_MN10300
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_FLASH_MN10300_STB
CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300
}
description "
The stb target provides the packages needed to run
eCos on a Matsushita STB board."
}
target asb {
alias { "Matsushita ASB2303 board" }
packages { CYGPKG_HAL_MN10300
CYGPKG_HAL_MN10300_AM33_ASB
CYGPKG_HAL_MN10300_AM33
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_FLASH_MN10300_ASB2303
}
description "
The asb target provides the packages needed to run
eCos on a Matsushita ASB2303 board."
}
target asb2305 {
alias { "Matsushita ASB2305 board" }
packages { CYGPKG_HAL_MN10300
CYGPKG_HAL_MN10300_AM33_ASB2305
CYGPKG_HAL_MN10300_AM33
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_FLASH_MN10300_ASB2305
}
description "
The asb2305 target provides the packages needed to run
eCos on a Matsushita ASB2305 board."
}
# --------------------------------------------------------------------------
# NEC targets
target ceb_v850 {
alias { "Cosmo CEB-V850 board" CEB ceb_v850_sa1 }
packages { CYGPKG_HAL_V85X
CYGPKG_HAL_V85X_V850
CYGPKG_HAL_V85X_V850_CEB
CYGPKG_IO_SERIAL_V85X_V850
}
description "
The ceb_v850 target provides the packages needed to run eCos on a
Cosmo CEB-V850 evaluation board fitted with a NEC V850/SA1 or NEC V850/SB1."
}
# --------------------------------------------------------------------------
# m68k targets
target mcf5272c3 {
alias { "Motorola mcf5272c3 evaluation board" }
packages {
CYGPKG_HAL_M68K
CYGPKG_HAL_M68K_MCF52xx
CYGPKG_HAL_M68K_MCF52xx_MCF5272
CYGPKG_HAL_M68K_MCF52xx_MCF5272_MCF5272C3
CYGPKG_DEVS_ETH_MCF5272
CYGPKG_IO_SERIAL_MCF5272_UART
}
description "The mcf5272c3 target provides the packages needed to run
eCos on the Motorola mcf5272c3 evaluation board."
}
# --------------------------------------------------------------------------
# --------------------------------------------------------------------------
# H8 targets
target h8300h_sim {
alias { "H8300H minimal simulator" }
packages { CYGPKG_HAL_H8300
CYGPKG_HAL_H8300_H8300H
CYGPKG_HAL_H8300_H8300H_SIM
CYGPKG_IO_SERIAL_H8300_SCI
}
description "
The h8300h_sim target provides the packages need to run
eCos in the H8/300H minimal simulator. It is not possible to
use any of the eCos device drivers when the simulator
is running in this mode."
}
target aki3068net {
alias { "Akizuki H8/3068 Network board" }
packages { CYGPKG_HAL_H8300
CYGPKG_HAL_H8300_H8300H
CYGPKG_HAL_H8300_H8300H_AKI3068NET
CYGPKG_IO_SERIAL_H8300_SCI
CYGPKG_DEVS_ETH_H8300_AKI3068NET
}
description "
The aki3068net target provides the packages need to run
eCos in the Akizuki H8/3068 Network board."
}
# --------------------------------------------------------------------------
# CalmRISC16 targets
target calm16_ceb {
alias { "CalmRISC16 Core Eval Board" }
packages { CYGPKG_HAL_CALM16
CYGPKG_HAL_CALM16_CORE
CYGPKG_HAL_CALM16_CEB
}
description "
The calm16_ceb target provides the packages needed to run
eCos on the CalmRISC16 Core Evaluation Board."
}
# --------------------------------------------------------------------------
# CalmRISC32 targets
target calm32_ceb {
alias { "CalmRISC32 Core Eval Board" }
packages { CYGPKG_HAL_CALM32
CYGPKG_HAL_CALM32_CORE
CYGPKG_HAL_CALM32_CEB
}
description "
The calm32_ceb target provides the packages needed to run
eCos on the CalmRISC32 Core Evaluation Board."
}
# --------------------------------------------------------------------------
package CYGPKG_HAL_POWERPC_TS1000 {
alias { "Allied Telesyn TS1000 board" hal_powerpc_ts1000 }
directory hal/powerpc/ts1000
script hal_powerpc_ts1000.cdl
hardware
description "
The TS1000 HAL package provides the support needed to run
eCos on a Allied Telesyn TS1000 board equipped with a PowerPC processor."
}
package CYGPKG_DEVS_FLASH_POWERPC_TS1000 {
alias { "FLASH memory support for Allied Telesyn TS1000 (PPC855) board" flash_ts1000 }
directory devs/flash/powerpc/ts1000
script flash_ts1000.cdl
hardware
description "
This package contains hardware support for FLASH memory
on the Allied Telesyn TS1000 (PPC855) platform."
}
package CYGPKG_DEVS_ETH_POWERPC_TS1000 {
alias { "Allied Telesyn TS1000 ethernet driver" ts1000_eth_driver }
hardware
directory devs/eth/powerpc/ts1000
script ts1000_eth_drivers.cdl
description "Ethernet driver specifics for Allied Telesyn TS1000 (MPC855T) based boards."
}
target ts1000 {
alias { "Allied Telesyn TS1000 board" ts1000_855 }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC8xx
CYGPKG_HAL_POWERPC_TS1000
CYGPKG_HAL_QUICC
CYGPKG_DEVS_FLASH_POWERPC_TS1000
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
CYGPKG_DEVS_ETH_POWERPC_FEC
CYGPKG_DEVS_ETH_POWERPC_TS1000
CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
}
description "
The ts1000 target provides the packages needed to run
eCos on a Allied Telesyn TS1000 (PPC855T) board."
}
# --------------------------------------------------------------------------
# OpenRISC targets
package CYGPKG_HAL_OPENRISC {
alias { "OpenRISC HAL" hal_openrisc openrisc_hal }
directory hal/openrisc/arch
script hal_openrisc.cdl
hardware
description "
The OpenRISC architecture HAL package provides generic
support for this processor architecture. It is also necessary to
select a specific target platform HAL package." }
package CYGPKG_HAL_OPENRISC_ORP {
alias { "OpenRISC Reference Platform" hal_orp orp_hal }
directory hal/openrisc/orp
script hal_openrisc_orp.cdl
hardware
description "
The OpenRISC Reference Platform (ORP) package should be used
with ORP-compliant simulators or hardware. "
}
target ORP {
alias { "OpenRISC Refererence Platform" orp }
packages { CYGPKG_HAL_OPENRISC
CYGPKG_HAL_OPENRISC_ORP
CYGPKG_DEVS_FLASH_OPENRISC_ORP
CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
}
description "
The ORP (OpenRISC Reference Platform) target provides the packages
needed to run eCos in simulator or HW environments that conform to the
OpenRISC Reference Platform."
}
Go to most recent revision | Compare with Previous | Blame | View Log