URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [arm/] [ebsa285/] [v2_0/] [include/] [hal_ebsa285.h] - Rev 565
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef CYGONCE_HAL_EBSA285_H #define CYGONCE_HAL_EBSA285_H /*============================================================================= // // hal_ebsa285.h // // HAL Description of SA-110 and 21285 control registers // and ARM memory control in general. // //============================================================================= //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //============================================================================= //#####DESCRIPTIONBEGIN#### // // Author(s): hmt // Contributors: hmt // Date: 1999-04-19 // Purpose: Intel EBSA285 hardware description // Description: // Usage: #include <cyg/hal/hal_ebsa285.h> // //####DESCRIPTIONEND#### // //===========================================================================*/ // Note: these defintions match the documentation, thus no attempt is made // to santise (mangle) the names against namespace pollution. Also, care should be // taken to keep this clean for use in assembly code (no "C" constructs). #define SZ_1K 0x00000400 #define SZ_2K 0x00000800 #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 #define SZ_32K 0x00008000 #define SZ_64K 0x00010000 #define SZ_128K 0x00020000 #define SZ_256K 0x00040000 #define SZ_512K 0x00080000 #define SZ_1M 0x00100000 #define SZ_2M 0x00200000 #define SZ_4M 0x00400000 #define SZ_8M 0x00800000 #define SZ_16M 0x01000000 #define SZ_32M 0x02000000 #define SZ_64M 0x04000000 #define SZ_128M 0x08000000 #define SZ_256M 0x10000000 #define SZ_512M 0x20000000 #define SZ_1G 0x40000000 #ifdef __ASSEMBLER__ #define REG8_VAL(a) (a) #define REG16_VAL(a) (a) #define REG32_VAL(a) (a) #define REG8_PTR(a) (a) #define REG16_PTR(a) (a) #define REG32_PTR(a) (a) #else /* __ASSEMBLER__ */ #define REG8_VAL(a) ((unsigned char)(a)) #define REG16_VAL(a) ((unsigned short)(a)) #define REG32_VAL(a) ((unsigned int)(a)) #define REG8_PTR(a) ((volatile unsigned char *)(a)) #define REG16_PTR(a) ((volatile unsigned long *)(a)) #define REG32_PTR(a) ((volatile unsigned long *)(a)) #endif /* __ASSEMBLER__ */ // // Memory Layout // #define EBSA285_RAM_BANK0_BASE 0x00000000 /* * SA-110 Cache and MMU Control Registers * * Accessed through coprocessor instructions. */ #define SA110_ID_REGISTER 0 #define SA110_CONTROL_REGISTER 1 #define SA110_TRANSLATION_TABLE_BASE_REGISTER 2 #define SA110_DOMAIN_ACCESS_CONTROL_REGISTER 3 #define SA110_FAULT_STATUS_REGISTER 5 #define SA110_FAULT_ADDRESS_REGISTER 6 #define SA110_CACHE_OPERATIONS_REGISTER 7 #define SA110_TLB_OPERATIONS_REGISTER 8 #define SA110_TEST_CLOCK_AND_IDLE_REGISTER 15 /* * SA-110 Cache and MMU Definitions */ #define SA110_ICACHE_SIZE SZ_16K #define SA110_DCACHE_SIZE SZ_16K #define SA110_ICACHE_LINESIZE_BYTES 32 #define SA110_DCACHE_LINESIZE_BYTES 32 #define SA110_ICACHE_LINESIZE_WORDS 8 #define SA110_DCACHE_LINESIZE_WORDS 8 #define SA110_ICACHE_WAYS 32 #define SA110_DCACHE_WAYS 32 #define SA110_ICACHE_LINE_BASE(p) REG32_PTR((unsigned long)(p) & \ ~(SA110_ICACHE_LINESIZE_BYTES - 1)) #define SA110_DCACHE_LINE_BASE(p) REG32_PTR((unsigned long)(p) & \ ~(SA110_DCACHE_LINESIZE_BYTES - 1)) #define SA110_ZEROS_BANK_BASE (0x50000000) #define ARM_FIRST_LEVEL_PAGE_TABLE_SIZE SZ_16K /* * SA-110 Cache and MMU ID Register value */ #define SA110_ID_MASK 0xFFFFFFF0 #define SA110_ID_VALUE 0x4401a100 /* * SA-110 Cache Control Register Bit Fields and Masks */ #define SA110_MMU_DISABLED 0x00000000 #define SA110_MMU_ENABLED 0x00000001 #define SA110_MMU_MASK 0x00000001 #define SA110_ADDRESS_FAULT_DISABLED 0x00000000 #define SA110_ADDRESS_FAULT_ENABLED 0x00000002 #define SA110_ADDRESS_FAULT_MASK 0x00000002 #define SA110_DATA_CACHE_DISABLED 0x00000000 #define SA110_DATA_CACHE_ENABLED 0x00000004 #define SA110_DATA_CACHE_MASK 0x00000004 #define SA110_WRITE_BUFFER_DISABLED 0x00000000 #define SA110_WRITE_BUFFER_ENABLED 0x00000008 #define SA110_WRITE_BUFFER_MASK 0x00000008 #define SA110_LITTLE_ENDIAN 0x00000000 #define SA110_BIG_ENDIAN 0x00000080 #define SA110_ACCESS_CHECKS_SYSTEM 0x00000100 #define SA110_ACCESS_CHECKS_ROM 0x00000200 #define SA110_INSTRUCTION_CACHE_DISABLED 0x00000000 #define SA110_INSTRUCTION_CACHE_ENABLED 0x00001000 #define SA110_INSTRUCTION_CACHE_MASK 0x00001000 /* * SA-110 Translation Table Base Bit Masks */ #define SA110_TRANSLATION_TABLE_MASK 0xFFFFC000 /* * SA-110 Domain Access Control Bit Masks */ #define SA110_DOMAIN_0_MASK 0x00000003 #define SA110_DOMAIN_1_MASK 0x0000000C #define SA110_DOMAIN_2_MASK 0x00000030 #define SA110_DOMAIN_3_MASK 0x000000C0 #define SA110_DOMAIN_4_MASK 0x00000300 #define SA110_DOMAIN_5_MASK 0x00000C00 #define SA110_DOMAIN_6_MASK 0x00003000 #define SA110_DOMAIN_7_MASK 0x0000C000 #define SA110_DOMAIN_8_MASK 0x00030000 #define SA110_DOMAIN_9_MASK 0x000C0000 #define SA110_DOMAIN_10_MASK 0x00300000 #define SA110_DOMAIN_11_MASK 0x00C00000 #define SA110_DOMAIN_12_MASK 0x03000000 #define SA110_DOMAIN_13_MASK 0x0C000000 #define SA110_DOMAIN_14_MASK 0x30000000 #define SA110_DOMAIN_15_MASK 0xC0000000 /* * SA-110 Fault Status Bit Masks */ #define SA110_FAULT_STATUS_MASK 0x0000000F #define SA110_DOMAIN_MASK 0x000000F0 /* * SA-110 Cache Control Operations Definitions */ #define SA110_FLUSH_CACHE_INST_DATA_OPCODE 0x0 #define SA110_FLUSH_CACHE_INST_DATA_RM 0x7 #define SA110_FLUSH_CACHE_INST_OPCODE 0x0 #define SA110_FLUSH_CACHE_INST_RM 0x5 #define SA110_FLUSH_CACHE_DATA_OPCODE 0x0 #define SA110_FLUSH_CACHE_DATA_RM 0x6 #define SA110_FLUSH_CACHE_DATA_SINGLE_OPCODE 0x1 #define SA110_FLUSH_CACHE_DATA_SINGLE_RM 0x6 #define SA110_CLEAN_CACHE_DATA_ENTRY_OPCODE 0x1 #define SA110_CLEAN_CACHE_DATA_ENTRY_RM 0xA #define SA110_DRAIN_CACHE_WRITE_BUFFER_OPCODE 0x4 #define SA110_DRAIN_CACHE_WRITE_BUFFER_RM 0xA /* * SA-110 TLB Operations Definitions */ #define SA110_FLUSH_INST_DATA_TLB_OPCODE 0x0 #define SA110_FLUSH_INST_DATA_TLB_RM 0x7 #define SA110_FLUSH_INST_TLB_OPCODE 0x0 #define SA110_FLUSH_INST_TLB_RM 0x5 #define SA110_FLUSH_DATA_TLB_OPCODE 0x0 #define SA110_FLUSH_DATA_TLB_RM 0x6 #define SA110_FLUSH_DATA_ENTRY_TLB_OPCODE 0x1 #define SA110_FLUSH_DATA_ENTRY_TLB_RM 0x6 /* * SA-110 Test, Clock and Idle Control Definition */ #define SA110_ICACHE_ODD_WORD_LOADING_OPCODE 0x1 #define SA110_ICACHE_ODD_WORD_LOADING_RM 0x1 #define SA110_ICACHE_EVEN_WORD_LOADING_OPCODE 0x1 #define SA110_ICACHE_EVEN_WORD_LOADING_RM 0x2 #define SA110_ICACHE_CLEAR_LFSR_OPCODE 0x1 #define SA110_ICACHE_CLEAR_LFSR_RM 0x4 #define SA110_ENABLE_CLOCK_SWITCHING_OPCODE 0x2 #define SA110_ENABLE_CLOCK_SWITCHING_RM 0x1 #define SA110_DISABLE_CLOCK_SWITCHING_OPCODE 0x2 #define SA110_DISABLE_CLOCK_SWITCHING_RM 0x2 #define SA110_DISABLE_mCLK_OUTPUT_OPCODE 0x2 #define SA110_DISABLE_mCLK_OUTPUT_RM 0x4 #define SA110_WAIT_FOR_INTERRUPT_OPCODE 0x2 #define SA110_WAIT_FOR_INTERRUPT_RM 0x8 /* * SA-110 Control and Status Register Base Definitions */ #define SA110_CONTROL_STATUS_BASE 0x42000000 #define SA110_REGISTER(x) REG32_PTR(SA110_CONTROL_STATUS_BASE + (x)) #define SA110_PCI_CONFIG0_BASE 0x7b000000 #define SA110_PCI_CONFIG1_BASE 0x7a000000 /* * These are standard PCI configuration offsets with base at * SA110_CONTROL_STATUS_BASE - a memory-mapped version of the board's * own PCI configuration registers. * (see io_pci_cfg.h for other registers) */ #define SA110_PCI_CFG_COMMAND_o 0x04 #define SA110_PCI_CFG_INT_LINE_o 0x3c #define SA110_PCI_CFG_CSR_MEM_BAR_o 0x10 // BAR[0] #define SA110_PCI_CFG_CSR_IO_BAR_o 0x14 // BAR[1] #define SA110_PCI_CFG_SDRAM_BAR_o 0x18 // BAR[2] #define SA110_PCI_CFG_COMMAND SA110_REGISTER(SA110_PCI_CFG_COMMAND_o) #define SA110_PCI_CFG_INT_LINE SA110_REGISTER(SA110_PCI_CFG_INT_LINE_o) #define SA110_PCI_CFG_CSR_MEM_BAR SA110_REGISTER(SA110_PCI_CFG_CSR_MEM_BAR_o) #define SA110_PCI_CFG_CSR_IO_BAR SA110_REGISTER(SA110_PCI_CFG_CSR_IO_BAR_o) #define SA110_PCI_CFG_SDRAM_BAR SA110_REGISTER(SA110_PCI_CFG_SDRAM_BAR_o) /* * These live in the same space as the PCI config registers, but * are specific to the 21285. */ #define SA110_OUT_INT_STATUS_o 0x30 #define SA110_OUT_INT_MASK_o 0x34 #define SA110_INBOUND_FIFO_o 0x40 #define SA110_OUTBOUND_FIFO_o 0x44 #define SA110_MAILBOX0_o 0x50 #define SA110_MAILBOX1_o 0x54 #define SA110_MAILBOX2_o 0x58 #define SA110_MAILBOX3_o 0x5C #define SA110_DOORBELL_o 0x60 #define SA110_DOORBELL_SETUP_o 0x64 #define SA110_OUT_INT_STATUS SA110_REGISTER(SA110_OUT_INT_STATUS_o) #define SA110_PCI_ADDR_EXT_o 0x140 #define SA110_DOORBELL_PCI_MASK_o 0x150 #define SA110_DOORBELL_SA_MASK_o 0x154 #define SA110_PCI_ADDR_EXT SA110_REGISTER(SA110_PCI_ADDR_EXT_o) #define SA110_DOORBELL_PCI_MASK SA110_REGISTER(SA110_DOORBELL_PCI_MASK_o) #define SA110_DOORBELL_SA_MASK SA110_REGISTER(SA110_DOORBELL_SA_MASK_o) #define SA110_OUT_INT_STATUS_DOORBELL_INT 0x4 #define SA110_OUT_INT_STATUS_OUTBOUND_INT 0x8 /* * SA-110 CSR Register Definitions */ #define SA110_CSR_BASE_ADDRESS_MASK_o 0xF8 #define SA110_CSR_BASE_ADDRESS_OFFSET_o 0xFC #define SA110_CSR_BASE_ADDRESS_MASK SA110_REGISTER(SA110_CSR_BASE_ADDRESS_MASK_o) #define SA110_CSR_BASE_ADDRESS_OFFSET SA110_REGISTER(SA110_CSR_BASE_ADDRESS_OFFSET_o) /* * SA-110 CSR Register Value Definitions */ #define SA110_CSR_WINDOW_SIZE_128 0x00000000 #define SA110_CSR_WINDOW_SIZE_512KB 0x00040000 #define SA110_CSR_WINDOW_SIZE_1MB 0x000C0000 #define SA110_CSR_WINDOW_SIZE_2MB 0x001C0000 #define SA110_CSR_WINDOW_SIZE_4MB 0x003C0000 #define SA110_CSR_WINDOW_SIZE_8MB 0x007C0000 #define SA110_CSR_WINDOW_SIZE_16MB 0x00FC0000 #define SA110_CSR_WINDOW_SIZE_32MB 0x01FC0000 #define SA110_CSR_WINDOW_SIZE_64MB 0x03FC0000 #define SA110_CSR_WINDOW_SIZE_128MB 0x07FC0000 #define SA110_CSR_WINDOW_SIZE_256MB 0x0FFC0000 /* * SA-110 SDRAM Register Definitions */ #define SA110_SDRAM_ARRAY_0_MODE_REGISTER_BASE REG32_PTR(0x40000000) #define SA110_SDRAM_ARRAY_1_MODE_REGISTER_BASE REG32_PTR(0x40004000) #define SA110_SDRAM_ARRAY_2_MODE_REGISTER_BASE REG32_PTR(0x40008000) #define SA110_SDRAM_ARRAY_3_MODE_REGISTER_BASE REG32_PTR(0x4000C000) #define SA110_SDRAM_BASE_ADDRESS_MASK_o 0x100 #define SA110_SDRAM_BASE_ADDRESS_OFFSET_o 0x104 #define SA110_EXP_ROM_BASE_ADDRESS_MASK_o 0x108 #define SA110_SDRAM_TIMING_o 0x10C #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_0_o 0x110 #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_1_o 0x114 #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_2_o 0x118 #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_3_o 0x11C #define SA110_SDRAM_BASE_ADDRESS_MASK SA110_REGISTER(SA110_SDRAM_BASE_ADDRESS_MASK_o) #define SA110_SDRAM_BASE_ADDRESS_OFFSET SA110_REGISTER(SA110_SDRAM_BASE_ADDRESS_OFFSET_o) #define SA110_EXP_ROM_BASE_ADDRESS_MASK SA110_REGISTER(SA110_EXP_ROM_BASE_ADDRESS_MASK_o) #define SA110_SDRAM_TIMING SA110_REGISTER(SA110_SDRAM_TIMING_o) #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_0 SA110_REGISTER(SA110_SDRAM_ADDRESS_SIZE_ARRAY_0_o) #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_1 SA110_REGISTER(SA110_SDRAM_ADDRESS_SIZE_ARRAY_1_o) #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_2 SA110_REGISTER(SA110_SDRAM_ADDRESS_SIZE_ARRAY_2_o) #define SA110_SDRAM_ADDRESS_SIZE_ARRAY_3 SA110_REGISTER(SA110_SDRAM_ADDRESS_SIZE_ARRAY_3_o) #define SA110_SDRAM_SIZE_1M 1 #define SA110_SDRAM_SIZE_2M 2 #define SA110_SDRAM_SIZE_4M 3 #define SA110_SDRAM_SIZE_8M 4 #define SA110_SDRAM_SIZE_16M 5 #define SA110_SDRAM_SIZE_32M 6 #define SA110_SDRAM_SIZE_64M 7 #define SA110_SDRAM_MUX_MODE0 0x00 #define SA110_SDRAM_MUX_MODE1 0x10 #define SA110_SDRAM_MUX_MODE2 0x20 #define SA110_SDRAM_MUX_MODE3 0x30 #define SA110_SDRAM_MUX_MODE4 0x40 #define SA110_SDRAM_MUX_MODE_MASK 0x70 /* * SA-110 SDRAM Configuration Value Definitions */ #define SA110_SDRAM_WINDOW_SIZE_256KB 0x00000000 #define SA110_SDRAM_WINDOW_SIZE_512KB 0x00040000 #define SA110_SDRAM_WINDOW_SIZE_1MB 0x000C0000 #define SA110_SDRAM_WINDOW_SIZE_2MB 0x001C0000 #define SA110_SDRAM_WINDOW_SIZE_4MB 0x003C0000 #define SA110_SDRAM_WINDOW_SIZE_8MB 0x007C0000 #define SA110_SDRAM_WINDOW_SIZE_16MB 0x00FC0000 #define SA110_SDRAM_WINDOW_SIZE_32MB 0x01FC0000 #define SA110_SDRAM_WINDOW_SIZE_64MB 0x03FC0000 #define SA110_SDRAM_WINDOW_SIZE_128MB 0x07FC0000 #define SA110_SDRAM_WINDOW_SIZE_256MB 0x0FFC0000 #define SA110_SDRAM_WINDOW_SIZE_NO_WINDOW 0x8FFC0000 /* * SA-110 Expansion ROM Configuration Value Definitions */ #define SA110_EXP_ROM_WINDOW_SIZE_1MB 0x00000000 #define SA110_EXP_ROM_WINDOW_SIZE_2MB 0x00100000 #define SA110_EXP_ROM_WINDOW_SIZE_4MB 0x00300000 #define SA110_EXP_ROM_WINDOW_SIZE_8MB 0x00700000 #define SA110_EXP_ROM_WINDOW_SIZE_16MB 0x00F00000 #define SA110_EXP_ROM_WINDOW_SIZE_NO_WINDOW 0x80F00000 /* * SA-110 SDRAM Timing Register Field Definitions */ #define SA110_SDRAM_ROW_PRECHARGE_1_CYCLE 0x00000000 #define SA110_SDRAM_ROW_PRECHARGE_2_CYCLES 0x00000001 #define SA110_SDRAM_ROW_PRECHARGE_3_CYCLES 0x00000002 #define SA110_SDRAM_ROW_PRECHARGE_4_CYCLES 0x00000003 #define SA110_SDRAM_LAST_DATA_IN_2_CYCLES 0x00000000 #define SA110_SDRAM_LAST_DATA_IN_3_CYCLES 0x00000004 #define SA110_SDRAM_LAST_DATA_IN_4_CYCLES 0x00000008 #define SA110_SDRAM_LAST_DATA_IN_5_CYCLES 0x0000000C #define SA110_SDRAM_RAS_TO_CAS_DELAY_2_CYCLES 0x00000020 #define SA110_SDRAM_RAS_TO_CAS_DELAY_3_CYCLES 0x00000030 #define SA110_SDRAM_CAS_LATENCY_2_CYCLES 0x00000080 #define SA110_SDRAM_CAS_LATENCY_3_CYCLES 0x000000C0 #define SA110_SDRAM_ROW_CYCLE_TIME_4_CYCLES 0x00000100 #define SA110_SDRAM_ROW_CYCLE_TIME_5_CYCLES 0x00000200 #define SA110_SDRAM_ROW_CYCLE_TIME_6_CYCLES 0x00000300 #define SA110_SDRAM_ROW_CYCLE_TIME_7_CYCLES 0x00000400 #define SA110_SDRAM_ROW_CYCLE_TIME_8_CYCLES 0x00000500 #define SA110_SDRAM_ROW_CYCLE_TIME_9_CYCLES 0x00000600 #define SA110_SDRAM_ROW_CYCLE_TIME_10_CYCLES 0x00000700 #define SA110_SDRAM_COMMAND_DRIVE_SAME_CYCLE 0x00000000 #define SA110_SDRAM_COMMAND_DRIVE_1_CYCLE 0x00000800 #define SA110_SDRAM_PARITY_DISABLED 0x00000000 #define SA110_SDRAM_PARITY_ENABLED 0x00001000 #define SA110_SDRAM_PARITY_MASK 0x00001000 #define SA110_SDRAM_SA110_PRIME_DISABLED 0x00000000 #define SA110_SDRAM_SA110_PRIME_ENABLED 0x00002000 #define SA110_SDRAM_SA110_PRIME_MASK 0x00002000 #define SA110_SDRAM_REFRESH_INTERVAL(x) (((x) << 16) & 0x003f0000) #define SA110_SDRAM_REFRESH_INTERVAL_MIN SA110_SDRAM_REFRESH_INTERVAL(1) #define SA110_SDRAM_REFRESH_INTERVAL_NORMAL SA110_SDRAM_REFRESH_INTERVAL(0x1A) /* * SA-110 SDRAM Address and Size Register Field Definitions */ #define SA110_SDRAM_SIZE_0 0x000000000 #define SA110_SDRAM_SIZE_1MB 0x000000001 #define SA110_SDRAM_SIZE_2MB 0x000000002 #define SA110_SDRAM_SIZE_4MB 0x000000003 #define SA110_SDRAM_SIZE_8MB 0x000000004 #define SA110_SDRAM_SIZE_16MB 0x000000005 #define SA110_SDRAM_SIZE_32MB 0x000000006 #define SA110_SDRAM_SIZE_64MB 0x000000007 #define SA110_SDRAM_ADDRESS_MULTIPLEX_MASK 0x000000070 #define SA110_SDRAM_ARRAY_BASE_MASK 0x00FF00000 /* * SA-110 Control Register. */ #define SA110_CONTROL_o 0x13C #define SA110_CONTROL SA110_REGISTER(SA110_CONTROL_o) /* * Control bits. */ #define SA110_CONTROL_INIT_COMPLETE 0x00000001 #define SA110_CONTROL_RST_I 0x00000200 #define SA110_CONTROL_WATCHDOG 0x00002000 #define SA110_CONTROL_CFN 0x80000000 /* * SA-110 UART Control/Configuration Registers. */ #define SA110_UART_DATA_REGISTER_o 0x160 #define SA110_UART_RXSTAT_o 0x164 #define SA110_UART_H_BAUD_CONTROL_o 0x168 #define SA110_UART_M_BAUD_CONTROL_o 0x16C #define SA110_UART_L_BAUD_CONTROL_o 0x170 #define SA110_UART_CONTROL_REGISTER_o 0x174 #define SA110_UART_FLAG_REGISTER_o 0x178 #define SA110_UART_DATA_REGISTER SA110_REGISTER(SA110_UART_DATA_REGISTER_o) #define SA110_UART_RXSTAT SA110_REGISTER(SA110_UART_RXSTAT_o) #define SA110_UART_H_BAUD_CONTROL SA110_REGISTER(SA110_UART_H_BAUD_CONTROL_o) #define SA110_UART_M_BAUD_CONTROL SA110_REGISTER(SA110_UART_M_BAUD_CONTROL_o) #define SA110_UART_L_BAUD_CONTROL SA110_REGISTER(SA110_UART_L_BAUD_CONTROL_o) #define SA110_UART_CONTROL_REGISTER SA110_REGISTER(SA110_UART_CONTROL_REGISTER_o) #define SA110_UART_FLAG_REGISTER SA110_REGISTER(SA110_UART_FLAG_REGISTER_o) #define UART_BASE_0 SA110_UART_DATA_REGISTER /* * SA-110 UART Data Register bit masks */ #define SA110_UART_DATA_MASK 0x000000FF /* * SA-110 UART RX Status Register bit masks */ #define SA110_UART_FRAMING_ERROR_MASK 0x00000001 #define SA110_UART_PARITY_ERROR_MASK 0x00000002 #define SA110_UART_OVERRUN_ERROR_MASK 0x00000004 /* * SA-110 UART High Baud Control Register bit masks */ #define SA110_UART_BREAK_DISABLED 0x00000000 #define SA110_UART_BREAK_ENABLED 0x00000001 #define SA110_UART_BREAK_MASK 0x00000001 #define SA110_UART_PARITY_DISABLED 0x00000000 #define SA110_UART_PARITY_ENABLED 0x00000002 #define SA110_UART_PARITY_MASK 0x00000002 #define SA110_UART_PARITY_ODD 0x00000000 #define SA110_UART_PARITY_EVEN 0x00000004 #define SA110_UART_ODD_EVEN_SELECT_MASK 0x00000004 #define SA110_UART_STOP_BITS_ONE 0x00000000 #define SA110_UART_STOP_BITS_TWO 0x00000008 #define SA110_UART_STOP_BITS_SELECT_MASK 0x00000008 #define SA110_UART_FIFO_DISABLED 0x00000000 #define SA110_UART_FIFO_ENABLED 0x00000010 #define SA110_UART_FIFO_ENABLE_MASK 0x00000010 #define SA110_UART_DATA_LENGTH_5_BITS 0x00000000 #define SA110_UART_DATA_LENGTH_6_BITS 0x00000020 #define SA110_UART_DATA_LENGTH_7_BITS 0x00000040 #define SA110_UART_DATA_LENGTH_8_BITS 0x00000060 #define SA110_UART_DATA_LENGTH_MASK 0x00000060 /* * SA-110 UART Medium Baud Control Register bit masks */ #define SA110_UART_H_BAUD_RATE_DIVISOR_MASK 0x0000000F /* * SA-110 UART Low Baud Control Register bit masks */ #define SA110_UART_L_BAUD_RATE_DIVISOR_MASK 0x000000FF /* * SA-110 UART Control Register bit fields */ #define SA110_UART_DISABLED 0x00000000 #define SA110_UART_ENABLED 0x00000001 #define SA110_UART_ENABLE_MASK 0x00000001 #define SA110_SIR_DISABLED 0x00000000 #define SA110_SIR_ENABLED 0x00000002 #define SA110_SIR_ENABLE_MASK 0x00000002 #define SA110_SIR_PULSE_WIDTH_BIT_RATE 0x00000000 #define SA110_SIR_PULSE_WIDTH_MAX_CLK 0x00000004 /* * SA-110 UART Flag Register bit masks */ #define SA110_TX_IDLE 0x00000000 #define SA110_TX_BUSY 0x00000008 #define SA110_TX_BUSY_MASK 0x00000008 #define SA110_RX_FIFO_FULL 0x00000000 #define SA110_RX_FIFO_EMPTY 0x00000010 #define SA110_RX_FIFO_STATUS_MASK 0x00000010 #define SA110_TX_FIFO_READY 0x00000000 #define SA110_TX_FIFO_BUSY 0x00000020 #define SA110_TX_FIFO_STATUS_MASK 0x00000020 /* * SA-110 IRQ Controller Registers */ #define SA110_IRQCONT_IRQSTATUS_o 0x180 #define SA110_IRQCONT_IRQRAWSTATUS_o 0x184 #define SA110_IRQCONT_IRQENABLE_o 0x188 #define SA110_IRQCONT_IRQENABLESET_o 0x188 #define SA110_IRQCONT_IRQENABLECLEAR_o 0x18C #define SA110_IRQCONT_IRQSOFT_o 0x190 #define SA110_IRQCONT_FIQSTATUS_o 0x280 #define SA110_IRQCONT_FIQRAWSTATUS_o 0x284 #define SA110_IRQCONT_FIQENABLE_o 0x288 #define SA110_IRQCONT_FIQENABLESET_o 0x288 #define SA110_IRQCONT_FIQENABLECLEAR_o 0x28C #define SA110_IRQCONT_FIQSOFT_o 0x290 #define SA110_IRQCONT_IRQSTATUS SA110_REGISTER(SA110_IRQCONT_IRQSTATUS_o) #define SA110_IRQCONT_IRQRAWSTATUS SA110_REGISTER(SA110_IRQCONT_IRQRAWSTATUS_o) #define SA110_IRQCONT_IRQENABLE SA110_REGISTER(SA110_IRQCONT_IRQENABLE_o) #define SA110_IRQCONT_IRQENABLESET SA110_REGISTER(SA110_IRQCONT_IRQENABLESET_o) #define SA110_IRQCONT_IRQENABLECLEAR SA110_REGISTER(SA110_IRQCONT_IRQENABLECLEAR_o) #define SA110_IRQCONT_IRQSOFT SA110_REGISTER(SA110_IRQCONT_IRQSOFT_o) #define SA110_IRQCONT_FIQSTATUS SA110_REGISTER(SA110_IRQCONT_FIQSTATUS_o) #define SA110_IRQCONT_FIQRAWSTATUS SA110_REGISTER(SA110_IRQCONT_FIQRAWSTATUS_o) #define SA110_IRQCONT_FIQENABLE SA110_REGISTER(SA110_IRQCONT_FIQENABLE_o) #define SA110_IRQCONT_FIQENABLESET SA110_REGISTER(SA110_IRQCONT_FIQENABLESET_o) #define SA110_IRQCONT_FIQENABLECLEAR SA110_REGISTER(SA110_IRQCONT_FIQENABLECLEAR_o) #define SA110_IRQCONT_FIQSOFT SA110_REGISTER(SA110_IRQCONT_FIQSOFT_o) /* * SA-110 Timer Control Registers */ #define SA110_TIMER_BASE_o 0x300 #define SA110_TIMER1_BASE_o (SA110_TIMER_BASE_o + 0x00) #define SA110_TIMER2_BASE_o (SA110_TIMER_BASE_o + 0x20) #define SA110_TIMER3_BASE_o (SA110_TIMER_BASE_o + 0x40) #define SA110_TIMER4_BASE_o (SA110_TIMER_BASE_o + 0x60) #define SA110_TIMER1_LOAD_o (SA110_TIMER1_BASE_o + 0x0) #define SA110_TIMER1_VALUE_o (SA110_TIMER1_BASE_o + 0x4) #define SA110_TIMER1_CONTROL_o (SA110_TIMER1_BASE_o + 0x8) #define SA110_TIMER1_CLEAR_o (SA110_TIMER1_BASE_o + 0xc) #define SA110_TIMER2_LOAD_o (SA110_TIMER2_BASE_o + 0x0) #define SA110_TIMER2_VALUE_o (SA110_TIMER2_BASE_o + 0x4) #define SA110_TIMER2_CONTROL_o (SA110_TIMER2_BASE_o + 0x8) #define SA110_TIMER2_CLEAR_o (SA110_TIMER2_BASE_o + 0xc) #define SA110_TIMER3_LOAD_o (SA110_TIMER3_BASE_o + 0x0) #define SA110_TIMER3_VALUE_o (SA110_TIMER3_BASE_o + 0x4) #define SA110_TIMER3_CONTROL_o (SA110_TIMER3_BASE_o + 0x8) #define SA110_TIMER3_CLEAR_o (SA110_TIMER3_BASE_o + 0xc) #define SA110_TIMER4_LOAD_o (SA110_TIMER4_BASE_o + 0x0) #define SA110_TIMER4_VALUE_o (SA110_TIMER4_BASE_o + 0x4) #define SA110_TIMER4_CONTROL_o (SA110_TIMER4_BASE_o + 0x8) #define SA110_TIMER4_CLEAR_o (SA110_TIMER4_BASE_o + 0xc) #define SA110_TIMER1_LOAD SA110_REGISTER(SA110_TIMER1_LOAD_o) #define SA110_TIMER1_VALUE SA110_REGISTER(SA110_TIMER1_VALUE_o) #define SA110_TIMER1_CONTROL SA110_REGISTER(SA110_TIMER1_CONTROL_o) #define SA110_TIMER1_CLEAR SA110_REGISTER(SA110_TIMER1_CLEAR_o) #define SA110_TIMER2_LOAD SA110_REGISTER(SA110_TIMER2_LOAD_o) #define SA110_TIMER2_VALUE SA110_REGISTER(SA110_TIMER2_VALUE_o) #define SA110_TIMER2_CONTROL SA110_REGISTER(SA110_TIMER2_CONTROL_o) #define SA110_TIMER2_CLEAR SA110_REGISTER(SA110_TIMER2_CLEAR_o) #define SA110_TIMER3_LOAD SA110_REGISTER(SA110_TIMER3_LOAD_o) #define SA110_TIMER3_VALUE SA110_REGISTER(SA110_TIMER3_VALUE_o) #define SA110_TIMER3_CONTROL SA110_REGISTER(SA110_TIMER3_CONTROL_o) #define SA110_TIMER3_CLEAR SA110_REGISTER(SA110_TIMER3_CLEAR_o) #define SA110_TIMER4_LOAD SA110_REGISTER(SA110_TIMER4_LOAD_o) #define SA110_TIMER4_VALUE SA110_REGISTER(SA110_TIMER4_VALUE_o) #define SA110_TIMER4_CONTROL SA110_REGISTER(SA110_TIMER4_CONTROL_o) #define SA110_TIMER4_CLEAR SA110_REGISTER(SA110_TIMER4_CLEAR_o) /* Timer bits */ #define SA110_TIMER_CONTROL_SCALE_1 0x00000000 #define SA110_TIMER_CONTROL_SCALE_16 0x00000004 #define SA110_TIMER_CONTROL_SCALE_256 0x00000008 #define SA110_TIMER_CONTROL_SCALE_EXT 0x0000000c #define SA110_TIMER_CONTROL_MODE 0x00000040 #define SA110_TIMER_CONTROL_ENABLE 0x00000080 /* * IRQ Controller IRQ Numbers */ #define SA110_IRQ_MIN 0 #define SA110_IRQ_RSV0 0 #define SA110_IRQ_SOFT_INTERRUPT 1 #define SA110_IRQ_CONSOLE_RX 2 #define SA110_IRQ_CONSOLE_TX 3 #define SA110_IRQ_TIMER_1 4 #define SA110_IRQ_TIMER_2 5 #define SA110_IRQ_TIMER_3 6 #define SA110_IRQ_TIMER_4 7 #define SA110_IRQ_IRQ_IN_I_0 8 #define SA110_IRQ_IRQ_IN_I_1 9 #define SA110_IRQ_IRQ_IN_I_2 10 #define SA110_IRQ_IRQ_IN_I_3 11 #define SA110_IRQ_XCS_I_0 12 #define SA110_IRQ_XCS_I_1 13 #define SA110_IRQ_XCS_I_2 14 #define SA110_IRQ_DOORBELL_FROM_HOST 15 #define SA110_IRQ_DMA_CHAN_1 16 #define SA110_IRQ_DMA_CHAN_2 17 #define SA110_IRQ_PIC_IRQ_I 18 #define SA110_IRQ_PMCSR_WRITE_BY_HOST 19 #define SA110_IRQ_RSV1 20 #define SA110_IRQ_RSV2 21 #define SA110_IRQ_START_BIST 22 #define SA110_IRQ_RECEIVED_SERR 23 #define SA110_IRQ_SDRAM_PARITY 24 #define SA110_IRQ_I20_INBOUND_POST_LIST 25 #define SA110_IRQ_RSV3 26 #define SA110_IRQ_DISCARD_TIMER_EXPIRED 27 #define SA110_IRQ_DATA_PARITY_ERROR 28 #define SA110_IRQ_MASTER_ABORT 29 #define SA110_IRQ_TARGET_ABORT 30 #define SA110_IRQ_PARITY_ERROR 31 #define SA110_IRQ_MAX 31 #define NUM_SA110_INTERRUPTS SA110_IRQ_MAX - SA110_IRQ_MIN + 1 #define SA110_IRQ_INTSRC_MASK(irq_nr) (1 << (irq_nr)) /* * SA110 IRQSOFT/FIQSOFT Register bit fields */ #define SA110_IRQSOFT_RAW_BIT_MASK 0x00000001 /* * SA-110 Miscellaneous Registers. */ #define SA110_XBUS_CYCLE_ARBITER_o 0x148 #define SA110_XBUS_IO_STROBE_MASK_o 0x14c #define SA110_XBUS_CYCLE_ARBITER SA110_REGISTER(SA110_XBUS_CYCLE_ARBITER_o) #define SA110_XBUS_IO_STROBE_MASK SA110_REGISTER(SA110_XBUS_IO_STROBE_MASK_o) #define SA110_XBUS_CYCLE_ARBITER_ENABLED 0x00800000 #define SA110_XBUS_XCS2 0x40012000 #define SA110_XBUS_XCS2_PCI_DISABLE 0x40 // ------------------------------------------------------------------------- // MMU initialization: // // These structures are laid down in memory to define the translation // table. For usage, see the memory setup in ebsa285_misc.c in this // component. hal_bsp_mmu_init() // /* * SA-1100 Translation Table Base Bit Masks */ #define ARM_TRANSLATION_TABLE_MASK 0xFFFFC000 /* * SA-1100 Domain Access Control Bit Masks */ #define ARM_ACCESS_TYPE_NO_ACCESS(domain_num) (0x0 << (domain_num)*2) #define ARM_ACCESS_TYPE_CLIENT(domain_num) (0x1 << (domain_num)*2) #define ARM_ACCESS_TYPE_MANAGER(domain_num) (0x3 << (domain_num)*2) // These are only useful in C, so: #ifndef __ASSEMBLER__ struct ARM_MMU_FIRST_LEVEL_FAULT { int id : 2; int sbz : 30; }; #define ARM_MMU_FIRST_LEVEL_FAULT_ID 0x0 struct ARM_MMU_FIRST_LEVEL_PAGE_TABLE { int id : 2; int imp : 2; int domain : 4; int sbz : 1; int base_address : 23; }; #define ARM_MMU_FIRST_LEVEL_PAGE_TABLE_ID 0x1 struct ARM_MMU_FIRST_LEVEL_SECTION { int id : 2; int b : 1; int c : 1; int imp : 1; int domain : 4; int sbz0 : 1; int ap : 2; int sbz1 : 8; int base_address : 12; }; #define ARM_MMU_FIRST_LEVEL_SECTION_ID 0x2 struct ARM_MMU_FIRST_LEVEL_RESERVED { int id : 2; int sbz : 30; }; #define ARM_MMU_FIRST_LEVEL_RESERVED_ID 0x3 #define ARM_MMU_FIRST_LEVEL_DESCRIPTOR_ADDRESS(ttb_base, table_index) \ (unsigned long *)((unsigned long)(ttb_base) + ((table_index) << 2)) #define ARM_MMU_SECTION(ttb_base, actual_base, virtual_base, \ cacheable, bufferable, perm) \ CYG_MACRO_START \ register union ARM_MMU_FIRST_LEVEL_DESCRIPTOR desc; \ \ desc.word = 0; \ desc.section.id = ARM_MMU_FIRST_LEVEL_SECTION_ID; \ desc.section.domain = 0; \ desc.section.c = (cacheable); \ desc.section.b = (bufferable); \ desc.section.ap = (perm); \ desc.section.base_address = (actual_base); \ *ARM_MMU_FIRST_LEVEL_DESCRIPTOR_ADDRESS(ttb_base, (virtual_base)) \ = desc.word; \ CYG_MACRO_END union ARM_MMU_FIRST_LEVEL_DESCRIPTOR { unsigned long word; struct ARM_MMU_FIRST_LEVEL_FAULT fault; struct ARM_MMU_FIRST_LEVEL_PAGE_TABLE page_table; struct ARM_MMU_FIRST_LEVEL_SECTION section; struct ARM_MMU_FIRST_LEVEL_RESERVED reserved; }; #endif /* __ASSEMBLER__ */ #define ARM_UNCACHEABLE 0 #define ARM_CACHEABLE 1 #define ARM_UNBUFFERABLE 0 #define ARM_BUFFERABLE 1 #define ARM_ACCESS_PERM_NONE_NONE 0 #define ARM_ACCESS_PERM_RO_NONE 0 #define ARM_ACCESS_PERM_RO_RO 0 #define ARM_ACCESS_PERM_RW_NONE 1 #define ARM_ACCESS_PERM_RW_RO 2 #define ARM_ACCESS_PERM_RW_RW 3 /*---------------------------------------------------------------------------*/ /* end of hal_ebsa285.h */ #endif /* CYGONCE_HAL_EBSA285_H */
Go to most recent revision | Compare with Previous | Blame | View Log