Subversion Repositories openrisc

//=============================================================================
//
//      flash.c - Cyclone Diagnostics
//
//=============================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   Scott Coulter, Jeff Frazier, Eric Breeden
// Contributors:
// Date:        2001-01-25
// Purpose:     
// Description: 
//
//####DESCRIPTIONEND####
//
//===========================================================================*/
 
#include <redboot.h>
#ifdef CYGPKG_IO_FLASH
#include <cyg/io/flash.h>
 
#include "iq80310.h"	/* 80310 chip set specific */
#include "7_segment_displays.h"
#include "test_menu.h"
 
typedef unsigned char FLASH_TYPE;
#define MASK 0xff  /* for 1 bank */
 
/* 28F016S5/28F640J3A Command Definitions  - First Bus Cycle */
#define RESET_CMD		(0xffffffff & MASK)
#define WRITE_TO_BUF_CMD	(0xe8e8e8e8 & MASK)
#define WRITE_CONFIRM_CMD	(0xd0d0d0d0 & MASK)
#define READ_ID_CMD		(0x90909090 & MASK)
#define READ_STAT_REG		(0x70707070 & MASK)
#define CLEAR_STAT_REG		(0x50505050 & MASK)
#define ERASE_CMD		(0x20202020 & MASK)
#define PROGRAM_CMD		(0x40404040 & MASK)
#define BEP_SUSPEND		(0xb0b0b0b0 & MASK)
#define BEP_RESUME		(0xd0d0d0d0 & MASK)
#define LOCK_CMD		(0x60606060 & MASK)
#define CLEAR_LOCK_BIT_SETUP	(0x60606060 & MASK)	/* 10/06/00 */
 
/* 28F016S5/28F640J3A Command Definitions  - Second Bus Cycle */
#define ERASE_CONFIRM		(0xd0d0d0d0 & MASK)
#define LOCK_BLOCK_CONFIRM	(0x01010101 & MASK)
#define MASTER_LOCK_CONFIRM	(0xf1f1f1f1 & MASK)  /* DO NOT EVER set master enable bit!!! */
#define UNLOCK_BLOCK_CONFIRM	(0xd0d0d0d0 & MASK)
#define CLEAR_LOCK_BIT_CONFIRM	(0xd0d0d0d0 & MASK)	/* 10/06/00 */
 
/* Flash category definitions */
#define SECTOR_PROG	0
#define BLOCK_PROG	1
 
/* status register bits */
#define WSM_READY		(FLASH_TYPE) (1 << 7)
#define WSM_BUSY		(FLASH_TYPE) (0 << 7)
#define BE_SUSPENDED		(FLASH_TYPE) (1 << 6)
#define BE_COMPLETED		(FLASH_TYPE) (0 << 6)
#define ERASE_UNLOCK_ERROR	(FLASH_TYPE) (1 << 5)
#define ERASE_UNLOCK_SUCCESS	(FLASH_TYPE) (0 << 5)
#define CLEAR_LOCK_BIT_ERROR	(FLASH_TYPE) (1 << 5)	/* 10/06/00 */
#define CLEAR_LOCK_BIT_SUCCESS	(FLASH_TYPE) (0 << 5)	/* 10/06/00 */
#define PROGRAM_LOCK_ERROR	(FLASH_TYPE) (1 << 4)
#define PROGRAM_LOCK_SUCCESS	(FLASH_TYPE) (0 << 4)
#define SET_LOCK_BIT_ERROR	(FLASH_TYPE) (1 << 4)	/* 10/17/00 */
#define SET_LOCK_BIT_SUCCESS	(FLASH_TYPE) (0 << 4)	/* 10/17/00 */
#define VPP_LOW_DETECT		(FLASH_TYPE) (1 << 3)
#define VPP_OK			(FLASH_TYPE) (0 << 3)
#define PROGRAM_SUSPENDED	(FLASH_TYPE) (1 << 2)
#define PROGRAM_COMPLETED	(FLASH_TYPE) (0 << 2)
#define DEVICE_PROTECTED	(FLASH_TYPE) (1 << 1)
#define DEVICE_UNLOCKED		(FLASH_TYPE) (0 << 1)
 
 
/* Other Intel 28F016S5/28F640J3A definitions */
#define CMD_SEQ_ERR		(FLASH_TYPE) (ERASE_UNLOCK_ERROR | PROGRAM_LOCK_ERROR)
#define ALL_FLASH_STATUS	(FLASH_TYPE) (0xfe)
#define UNKNOWN_ERR		(FLASH_TYPE) (0xff)
 
#define TEST_BUF_LONGS		16384
#define TEST_BUF_CHARS		65536
 
#define MADE_BY_INTEL		(0x89898989 & MASK)		/* Manufacturer Code, read at address 0, note that address bit A0 is not used in x8 or x16 mode when obtaining identifier code */
 
#define I28F640J3A		(0x17171717 & MASK)		/* Device Code, read at address 1, note that bit address A0 is not used in x8 or x16 mode when obtaining identifier code */
 
/*#define FLASH_BLOCK_SIZE	0x10000*/	/* 28F016S5 */
#define FLASH_BLOCK_SIZE	0x20000		/* 28F640J3A */
 
#define BLOCK_LOCKED		1
#define BLOCK_UNLOCKED		0
 
// First 4K page of flash at physical address zero is
// virtually mapped at address 0xd0000000.
#define FLASH_P2V(x) ((volatile FLASH_TYPE *)(((unsigned)(x) < 0x1000) ?  \
                           ((unsigned)(x) | 0xd0000000) :  \
                           (unsigned)(x)))
 
 
unsigned long *flash_buffer = (unsigned long *)0xa1000000;
 
int cmd_stat;						
 
extern void _flushICache(void);
extern void _enableICache(void);
extern void _disableICache(void);
extern void _switchMMUpageTables(void);
extern void _usec_delay(void);
extern void _msec_delay(void);
 
unsigned long eeprom_size;
unsigned long flash_base;
 
ADDR eeprom_prog_first, eeprom_prog_last;
 
extern long hexIn(void);
extern char *sgets(char *s);
 
/* forward declarations */
void init_eeprom(void) RAM_FUNC_SECT;
int check_eeprom(ADDR addr, unsigned long length) RAM_FUNC_SECT;
int check_bstat(int block_num) RAM_FUNC_SECT;
int set_all_lock_bits(void) RAM_FUNC_SECT;		/* 10/11/00 added */
int clear_all_lock_bits(ADDR addr) RAM_FUNC_SECT;	/* 10/06/00 added */
int erase_eeprom(ADDR addr, unsigned long length) RAM_FUNC_SECT;
int write_eeprom(ADDR start_addr, const void *data_arg, int data_size) RAM_FUNC_SECT;
void flash_test(MENU_ARG arg) RAM_FUNC_SECT;
void display_val(int num) RAM_FUNC_SECT;
void display_out (int msb_flag, unsigned char val) RAM_FUNC_SECT;
 
#define MSB_DISPLAY_REG		(volatile unsigned char *)0xfe840000
#define LSB_DISPLAY_REG		(volatile unsigned char *)0xfe850000
 
void display_out (int msb_flag, unsigned char val)
{
    volatile unsigned char *ledPtr;
 
    if (msb_flag)
	ledPtr = MSB_DISPLAY_REG;
    else
	ledPtr = LSB_DISPLAY_REG;
 
    *ledPtr = SevSegDecode[val & 0xf];
}
 
void display_val (int number)
{
    unsigned char disp_val = number % 256;
    unsigned char msb, lsb;
 
    lsb = disp_val & 0x0f;
    msb = (disp_val & 0xf0) >> 4;
 
    display_out (0, lsb);
    display_out (1, msb);
}
 
/********************************************************/
/* INIT FLASH						*/
/*							*/
/* This routine initializes the variables for timing    */
/* with any board configuration.  This is used to get   */
/* exact timing every time.				*/
/********************************************************/
void init_eeprom(void)
{
    unsigned char MfgCode=MADE_BY_INTEL;
    unsigned char DevCode=I28F640J3A;
 
    eeprom_size = 0x800000;
 
    printf( "\nManufacturer Code = 0x%x\n", MfgCode);
    printf( "Device Code = %x\n", DevCode);
    printf( "Flash Memory size = 0x%x\n", eeprom_size);
 
    return;
}
 
/********************************************************/
/* CHECK EEPROM						*/
/* Check if Flash is Blank				*/
/*							*/
/* returns OK if it is; returns ERROR and sets cmd_stat */
/* to an error code if memory region is not Flash or if */
/* it is not blank.					*/
/*							*/
/********************************************************/
int check_eeprom(ADDR addr, unsigned long length)
{
    FLASH_TYPE *p, *end;
 
    if (eeprom_size == 0) {
	cmd_stat = E_NO_FLASH;
	return ERR;
    }
 
    if (addr == NO_ADDR) {
	addr = FLASH_BLK4_BASE_ADDR;	/* start at base address of block */
	length = eeprom_size - RESERVED_AREA_SIZE;
    } else if (length == 0)
	length = 1;
 
    p = (FLASH_TYPE *)addr;
 
    end = (FLASH_TYPE *)FLASH_TOP_ADDR; 
    /* search for first non blank address starting at base address of Flash Block 2 */
    while (p != end) {
	if (*FLASH_P2V(p) != 0xff) {
	    eeprom_prog_first = (ADDR)p;	/* found first non blank memory cell */
 
	    /* now find last non blank memory cell starting from top of Flash memory */
	    for (p = end - 1; *FLASH_P2V(p) == 0xff; --p)
		;
	    eeprom_prog_last = (ADDR)p;	/* found last non blank memory cell */ 
 
	    cmd_stat = E_EEPROM_PROG;
 
	    return ERR;
        }
	p++;
    }
    return OK;
}
 
/********************************************************/
/* SET ALL LOCK BITS					*/
/*							*/
/* returns OK if successful; otherwise returns ERROR    */
/* and sets cmd_stat to an error code			*/
/* The 28F640J3A is divided into 64, 128Kbyte blocks	*/
/* This routine sets a lock bit in the block specified  */
/* by a given address					*/
/********************************************************/
int set_all_lock_bits()
{
    unsigned long addr = 0x0; 
    void *err_addr;
    int stat;
 
    if ((stat = flash_lock((void *)addr, 4 * FLASH_BLOCK_SIZE, (void **)&err_addr)) != 0)
	return stat;
 
    return( OK );
}
 
 
/********************************************************/
/* CLEAR ALL LOCK BITS					*/
/*							*/
/* returns OK if successful; otherwise returns ERROR    */
/* and sets cmd_stat to an error code			*/
/* The 28F640J3A is divided into 64, 128Kbyte blocks	*/
/* This routine clears all block lock bits	 	*/
/********************************************************/
int clear_all_lock_bits(ADDR addr)
{
    void *err_addr;
    int stat;
 
    if ((stat = flash_unlock((void *)0, eeprom_size, (void **)&err_addr)) != 0)
	return stat;
    return OK;
}
 
 
/********************************************************/
/* ERASE EEPROM						*/
/*							*/
/* returns OK if erase was successful,			*/
/* otherwise returns ERROR				*/
/* and sets cmd_stat to an error code			*/
/*							*/
/********************************************************/
int erase_eeprom(ADDR addr, unsigned long length)
{
    void *err_addr;
    int num_blocks;
 
    /********************************************************/
    /* The 28F640J3A is divided into 64, 128Kbyte blocks    */
    /* each of which must be individually erased.	    */
    /* This routine and erases a whole number of blocks     */
    /********************************************************/
 
    /* don't erase boot area even if entire eeprom is specified */
    if (addr == NO_ADDR) {
	addr = FLASH_BLK4_BASE_ADDR;
	length = eeprom_size - RESERVED_AREA_SIZE;
    }
 
    if (length == 0) {
	/* 10/06/00 */
	printf( "erase_eeprom, return OK, length=0\n");
	return OK;
    }
 
    /* start address must be block-aligned */
    if ((addr % FLASH_BLOCK_SIZE) != 0)	{
	cmd_stat = E_EEPROM_ADDR;
	printf( "erase_eeprom, addr = 0x%x\n", addr);
	printf( "erase_eeprom, FLASH_BLOCK_SIZE = 0x%x\n", FLASH_BLOCK_SIZE);
	printf( "erase_eeprom, return ERR, (addr %% FLASH_BLOCK_SIZE) = %d\n", addr % FLASH_BLOCK_SIZE);
 
	return ERR;
    }
 
    /* figure out how many blocks require erasure - round up using integer division */
    if (length % FLASH_BLOCK_SIZE)		/* non-multiple, round up */
	num_blocks = (length + FLASH_BLOCK_SIZE) / FLASH_BLOCK_SIZE;
    else					/* multiple number of blocks */
	num_blocks = length / FLASH_BLOCK_SIZE;
 
    if (eeprom_size == 0) {
	cmd_stat = E_NO_FLASH;
	return ERR;
    }
 
    if (flash_erase((void *)addr, num_blocks * FLASH_BLOCK_SIZE, (void **)&err_addr) != 0) {
	cmd_stat = E_EEPROM_FAIL;
	return ERR;
    }
 
    return OK;
}
 
 
/********************************************************/
/* WRITE EEPROM                				*/
/*                     					*/
/* returns OK if successful; otherwise returns ERROR    */
/* and sets cmd_stat to an error code		 	*/
/*							*/
/********************************************************/
int
write_eeprom(ADDR start_addr, const void *data_arg, int data_size)
{
    void *err_addr;
 
    if (flash_program((void *)start_addr, data_arg, data_size, &err_addr) != 0) {
	cmd_stat = E_EEPROM_FAIL;
	return ERR;
    }
    return OK;
}
 
 
/*****************************************************************************
*
* flash_test - System Flash ROM diagnostics
*
* A destructive Flash ROM Read/Write test.  Note that the area of Flash
* which is tested changes based on whether the diagnostic is being invoked
* from the System code or from the Factory code (can't write over MON960).
*
* This test basically does a Longword Address test to the Flash area.
*
*/
void flash_test(MENU_ARG arg)
{
 
    ADDR start_addr = (ADDR)FLASH_ADDR;	/* Original */
 
    int i;
    unsigned long *f_ptr = (unsigned long *)FLASH_ADDR;
    int bytes_written = 0;
    unsigned long flash_data;
    char answer[20];
 
/* 10/31/00 */
    int status;
 
    init_eeprom();
 
    printf("***********************************\n");
    printf("***           WARNING           ***\n");
    printf("*** This test is destructive to ***\n");
    printf("*** all contents of the FLASH!  ***\n");
    printf("***********************************\n");
 
    printf("\nDo you wish to continue? (y/n)\n");
    sgets(answer);
    printf("\n\n");
    if ((answer[0] != 'y') && (answer[0] != 'Y'))
	return; 
 
    printf ("FLASH begins at 0x%X\n", FLASH_ADDR);
    printf ("Total FLASH size = 0x%X\n\n", eeprom_size);
    printf ("Checking FLASH ...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
 
    printf ("\nClearing Block Lock Bits... \n");
    if(clear_all_lock_bits(NO_ADDR)==OK)
        printf("Done!\n\n");
    else
        printf("Error!\n\n");
 
    printf ("Erasing FLASH...\n");
    if (erase_eeprom(NO_ADDR, 0) != OK)
        printf("Error on erase_eeprom()\n\n");
    else
        printf("Done Erasing FLASH!\n\n");
 
    (ADDR)start_addr = (ADDR)FLASH_BLK4_BASE_ADDR;
 
    printf ("Writing Longword Data to FLASH...\n");
 
    /* write to all of available Flash ROM.  Don't do this thousands of times
       since the Flash has only 100,000 write cycles in its lifespan */
 
    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE)) {
	flash_data = (unsigned long)start_addr;
    	for (i=0; i<TEST_BUF_LONGS; i++) {
            flash_buffer[i] = flash_data;	/* put address in buffer */
	    flash_data += 4;			/* increment address     */
	}
        if (write_eeprom (start_addr, (void *)flash_buffer, TEST_BUF_CHARS) != OK) {
            printf("Error on write_eeprom()\n");
            goto finish;
        }
        start_addr = (unsigned long)start_addr + TEST_BUF_CHARS;
        bytes_written += TEST_BUF_CHARS;
    }
 
    printf ("Write Complete, Verifying Data...\n");
    bytes_written = 0;
 
    f_ptr = (unsigned long *)FLASH_BLK4_BASE_ADDR;
 
    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE)) {
        if (*f_ptr != (unsigned long)f_ptr) {
            printf ("Data verification error at 0x%X\n", (unsigned long)f_ptr);
            printf ("Expected 0x%X Got 0x%X\n", (unsigned long)f_ptr, *f_ptr);
            goto finish;
        }
        f_ptr++;
        bytes_written += 4;
    }
    printf ("Done Verifying Longword Data!\n\n");
 
    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
                eeprom_prog_first, eeprom_prog_last);
 
    printf ("Erasing FLASH...\n");
    if (erase_eeprom(NO_ADDR, 0) != OK)
        printf("Error on erase_eeprom()\n\n");
    else
        printf("Done Erasing FLASH!\n\n");
 
    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
	       eeprom_prog_first, eeprom_prog_last);
 
    /* reinitialize variables */
    bytes_written = 0;
 
    start_addr = (ADDR)FLASH_BLK4_BASE_ADDR;
    f_ptr = (unsigned long *)FLASH_BLK4_BASE_ADDR;
 
    printf ("Writing Inverted Longword Data to FLASH...\n");
 
    /* write to all of available Flash ROM.  Don't do this thousands of times
       since the Flash has only 100,000 write cycles in its lifespan */
 
    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE)) {
	flash_data = (unsigned long)start_addr;
    	for (i=0; i<TEST_BUF_LONGS; i++) {
            flash_buffer[i] = ~flash_data;	/* put address BAR in buffer */
	    flash_data += 4;			/* increment address     */
	}
        if (write_eeprom (start_addr, (void *)flash_buffer, TEST_BUF_CHARS) != OK) {
            printf("Error on write_eeprom()\n");
            goto finish;
        }
        start_addr = (unsigned long)start_addr + TEST_BUF_CHARS;
        bytes_written += TEST_BUF_CHARS;
    }
 
    printf ("Write Complete, Verifying Data...\n");
    bytes_written = 0;
 
    while (bytes_written < (eeprom_size - RESERVED_AREA_SIZE)) {
        if (*f_ptr != (~(unsigned long)f_ptr)) {
            printf ("Data verification error at 0x%X\n", (unsigned long)f_ptr);
            printf ("Expected 0x%X Got 0x%X\n", (~(unsigned long)f_ptr), *f_ptr);
            goto finish;
        }
        f_ptr++;
        bytes_written += 4;
    }
    printf ("Done Verifying Inverted Longword Data!\n\n");
 
 
    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else {
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
	       eeprom_prog_first, eeprom_prog_last);
    }
 
    printf ("Erasing FLASH...\n");
    if (erase_eeprom(NO_ADDR, 0) != OK)
        printf("Error on erase_eeprom()\n\n");
    else
        printf("Done Erasing FLASH!\n\n");
 
    printf ("Checking FLASH...\n");
    if (check_eeprom(NO_ADDR, 0) == OK)
        printf("FLASH is erased\n\n");
    else
        printf("FLASH is programmed between 0x%X and 0x%X\n\n",
	       eeprom_prog_first, eeprom_prog_last);
 
/* 11/02/00 */
    printf ("Setting Lock Bits for Blocks 0-3... \n");
    if( (status = set_all_lock_bits() ) == OK )
        printf("Done!\n");
    else
        printf("Error! status =0x%x\n", status);
 
finish:
    _flushICache();
 
    printf ("\nHit <CR> to Continue...\n");
    (void)hexIn();
    return;
}
 
#endif // CYGPKG_IO_FLASH