Subversion Repositories openrisc_me

##=============================================================================
##
##      romboot.S
##
##      x86 romboot
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   jskov
## Contributors:jskov
## Date:        1999-01-07
## Purpose:     x86 romboot
## Description: When booting from ROM we need to run a short sequence of real
##              mode code before jumping into 32 bit protected mode. There are
##              problems in GAS with mixing all this code together, and it is
##              easier to just move this bit of code out to a separate file.
##              
##
######DESCRIPTIONEND####
##
##=============================================================================


#include <pkgconf/system.h>
#include <pkgconf/hal.h>

#include <cyg/hal/arch.inc>

#==============================================================================

//    .file   "romboot.S"

#------------------------------------------------------------------------------

        .code16

romboot_start:                  
        /* Disable interrupt handling. */
        cli

        # Set DS == CS
        movw    %cs,%ax
        movw    %ax,%ds
        # set ES == 0
        movw    $0,%ax
        movw    %ax,%es

        # Call video bios to init display
        movw    $0xc000,%bx
        movw    %bx,%ds
        movw    0x0000,%ax
        movw    $0x0000,%bx
        movw    %bx,%ds
        cmpw    $0xAA55,%ax
        jne     1f
        .byte   0x9a            # lcall
        .word   0x0003          # offset
        .word   0xc000          # segment
1:
        
        movw    %cs,%ax
        movw    %ax,%ds
        # set ES == 0
        movw    $0,%ax
        movw    %ax,%es

        # build a GDT descriptor in memory at location zero
        movw    $(gdtEnd - gdtStart),%ax
        movw    %ax,%es:0
        lea     gdtStart,%ax
        addw    $0xFF00,%ax
        movw    %ax,%es:2
        movw    $0x000F,%ax
        movw    %ax,%es:4
        
        # load GDTR
        lgdt    %es:0

        # Switch to protected mode.
        movl    %cr0,%eax
        orb     $1, %al
        movl    %eax,%cr0

        # and do a jump to flush instruction prefetch
        jmp     romboot_pm

        hlt

        .align  4, 0xCC
gdtStart:
        /* Selector 0x00 == invalid. */
        .word   0x0000
        .word   0x0000
        .byte   0x00
        .byte   0x00
        .byte   0x00
        .byte   0x00

        /* Selector 0x08 == code. */
        .word   0xFFFF
        .word   0x0000
        .byte   0x00
        .byte   0x9B
        .byte   0xCF
        .byte   0x00

        /* Selector 0x10 == data. */
        .word   0xFFFF
        .word   0x0000
        .byte   0x00
        .byte   0x93
        .byte   0xCF
        .byte   0x00

        /* Selector 0x18 == shorter code: faults any code 
         * access 0xF0000000-0xFFFFFFFF.
         */
        .word   0xFFFF
        .word   0x0000
        .byte   0x00
        .byte   0x9B
        .byte   0xC7
        .byte   0x00

        /* Selector 0x20 == data; faults any access 0xF0000000-0xFFFFFFFF. */
        .word   0xFFFF
        .word   0x0000
        .byte   0x00
        .byte   0x93
        .byte   0xC7
        .byte   0x00

        .align  4, 0xCC
gdtEnd:

        # We arrive here in protected mode
romboot_pm:     

        # Load data selectors
        movw    $0x10, %ax
        movw    %ax, %ds
        movw    %ax, %es
        movw    %ax, %fs
        movw    %ax, %gs
        
        # jump to start of ROM, where the PM code starts        
#       ljmp    $8,$0xF0000
        .byte   0x66,0xea       # opsize + ljmp opcode
        .long   0x000F0000      # destination address
        .word   0x0008          # code selector

        .code16

        .org    0xF0
romboot_reset:          
        jmp     romboot_start

        .org    0x100
        
#------------------------------------------------------------------------------
# end of romboot.S