URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [i386/] [pcmb/] [v2_0/] [ChangeLog] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
2002-08-14 Gary Thomas <gthomas@ecoscentric.com>
2002-08-14 Drew Moseley <drew.moseley@intel.com>
* cdl/hal_i386_pcmb.cdl:
* include/pcmb_io.h: Increase PCI space to include all possible
busses, slots, etc. Required because defaults are often too small.
2002-04-29 Gary Thomas <gthomas@redhat.com>
* src/pcmb_misc.c (hal_pcmb_init): Disable NMI at this point since
no real handlers are in place to handle it. This fixes a problem
with manual reset code for IDE drivers which can cause NMI.
2002-04-26 Bart Veer <bartv@redhat.com>
* support/gfxmode.c:
A utility to find out what graphics modes are available on any
given PC.
* include/pcmb.inc:
Change the graphics mode during RedBoot startup, when configured
to do so.
* cdl/hal_i386_pcmb.cdl:
Add new configuration option for changing the graphics mode
during RedBoot startup.
2001-12-06 Nick Garnett <nickg@redhat.com>
* include/pcmb_serial.h:
* src/pcmb_serial.c:
Added a simple validation test for serial devices. If the status
register reads back all ones we decide that the device is absent
and mark it invalid. We test this elsewhere to avoid touching the
device again. This should help to cope with various problems with
PCs that come with only one serial port.
2001-11-29 Jonathan Larmour <jlarmour@redhat.com>
* src/pcmb_screen.c: Restore sensible num lock behaviour after the
last change.
(KBScanTable): Fix scan table size.
2001-11-29 Trenton D. Adams <tadams@theone.dnsalias.com>
* src/pcmb_screen.c: Support numeric keypad and ctrl-alt-del for
rebooting.
2001-11-23 Nick Garnett <nickg@redhat.com>
* include/pcmb_io.h (PC_WRITE_SCREEN): Wrap positions beyond end
of screen back to start.
2001-11-01 Jonathan Larmour <jlarmour@redhat.com>
* src/pcmb_misc.c (hal_pcmb_init): Fix typo:
CYGPKG_HAL_I386_PCMB_HAL_MEMSIZE_BIOS ->
CYGPKG_HAL_I386_PCMB_MEMSIZE_BIOS
2001-10-19 Ian Campbell <icampbell@arcom.co.uk>
* cdl/hal_i386_pcmb.cdl: Add cdl_options for
CYGPKG_HAL_I386_PCMB_MEMSIZE to allow configuration of how memory
is detected. Change CYGNUM_HAL_RTC_PERIOD to use default_value
rather than calculated (so it can be overridden in the platform).
* src/pcmb_misc.c: Implement CYGPKG_HAL_I386_PCMB_MEMSIZE
configuration options.
2001-10-16 Mark Salter <msalter@redhat.com>
* src/pcmb_serial.c (cyg_hal_plf_serial_init): Use CDL to determine
how many serial ports to support.
* src/pcmb_screen.c (cyg_hal_plf_screen_init): Use CDL to determine
channel number for keyboard/screen.
2001-10-01 Ian Campbell <icampbell@arcom.co.uk>
* include/pcmb_io.h: Include CYGBLD_HAL_PLATFORM_H rather than
<pkgconf/hal_i386_pc.h>. Also include <pkgconf/system.h> so the
define is available.
2001-09-14 Mark Salter <msalter@redhat.com>
* include/pcmb_io.h (HAL_IDE_READ_ALTSTATUS): Add 2 for correct offset.
(HAL_IDE_WRITE_CONTROL): Ditto.
2001-08-22 Nick Garnett <nickg@redhat.com>
* src/pcmb_misc.c: Added spinlock to clock read operation.
* include/pcmb_io.h (PC_WRITE_SCREEN_*): Added casts to make these
macros more universal.
* src/pcmb_smp.c: Added this file to contain all SMP related
code. This includes parsing the MP structures; initializing the
APIC and IOAPIC; starting the CPUs; interrupt mapping; inter-CPU
interrupts; and CPU synchronization in the event of a debuggable
exception.
Note: there is still a _lot_ of debugging code in here, mostly
disabled, which needs cleaning up. Also, if this code is to ever
be released to the public, it should probably be tidied up a bit
more.
* include/pcmb_intr.h: Added SMP support. This includes the
inter-CPU interrupt vectors, interrupt masking, acknowledge, and
CPU affinity via the APIC and IOAPIC.
* cdl/hal_i386_pcmb.cdl: Added configury to compile pcmb_smp.c
only when SMP is enabled. Also define HAL_PLATFORM_EXTRA to
contain the SMP-ness of the HAL, so that RedBoot can report it.
2001-07-31 Mark Salter <msalter@redhat.com>
* include/pcmb_io.h: Add IDE I/O macros.
* cdl/hal_i386_pcmb.cdl: Now implements CYGINT_HAL_PLF_IF_IDE.
2001-07-18 Jonathan Larmour <jlarmour@redhat.com>
* include/pcmb_intr.h: Fill in interrupt table descriptions.
2001-07-05 Jonathan Larmour <jlarmour@redhat.com>
* src/pcmb_misc.c (hal_pcmb_init): Silence warning
* include/pcmb_intr.h: Revert below change - not relevant in this case
for clobbers
2001-07-04 Jonathan Larmour <jlarmour@redhat.com>
* include/pcmb_intr.h: Be pedantic about register constraint syntax
to satisfy newer compilers
2001-05-16 Jonathan Larmour <jlarmour@redhat.com>
* src/pcmb_misc.c (hal_pc_clock_initialize): Use mode 2 (rate generator)
instead of mode 3 (square wave).
2001-05-03 Nick Garnett <nickg@cygnus.co.uk>
[x86 branch]
* cdl/hal_i386_pcmb.cdl: Changed option
CYGIMP_HAL_I386_PCMB_SCREEN_SUPPORT to interface
CYGINT_HAL_I386_PCMB_SCREEN_SUPPORT.
2001-03-14 Nick Garnett <nickg@cygnus.co.uk>
[x86 branch]
* src/pcmb_misc.c:
Added hal_pcmb_init() which currently extracts memory sizes out of
CMOS RAM.
Added hal_i386_mem_real_region_top() to return top of either base
or extended memory regions.
* include/pcmb_io.h: Added CMOS RAM access macros.
* include/pcmb.inc: Removed memory size stuff.
* cdl/hal_i386_pcmb.cdl:
Added implement CYGINT_HAL_I386_MEM_REAL_REGION_TOP.
2001-03-13 Nick Garnett <nickg@cygnus.co.uk>
[x86 branch]
* include/pcmb.inc: Removed redundant FPU code.
2001-03-09 Nick Garnett <nickg@cygnus.co.uk>
[x86 branch]
* include/pcmb_intr.h: Rewrote HAL_INTERRUPT_ACKNOWLEDGE() and
reinstated as main acknowledge mechanism.
2001-03-08 Nick Garnett <nickg@cygnus.co.uk>
[x86 branch]
* cdl/hal_i386_pcmb.cdl:
* include/pcmb.inc:
* include/pcmb_intr.h:
* include/pcmb_io.h:
* include/pcmb_serial.h:
* src/pcmb_misc.c:
* src/pcmb_screen.c:
* src/pcmb_serial.c:
Created this package to provide the support needed to run eCos
binaries on an i386 PC using a standard motherboard. This package
provides support for the standard PC devices: timers, interrupt
controller, serial ports, ASCII display, keyboard, PCI bus
etc. that are found on all PC compatible platforms. It does not
provide support for devices that may also be found on modern
motherboards, such as ethernet, sound and video devices. These are
supported by drivers elsewhere.
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log