Subversion Repositories openrisc

#ifndef CYGONCE_PCMB_IO_H
#define CYGONCE_PCMB_IO_H
 
//=============================================================================
//
//      pcmb_io.h
//
//      PC Motherboard specific IO support
//
//=============================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    proven
// Contributors: proven, jskov, pjo
// Date:         1999-10-15
// Purpose:      PC Motherboard IO support
// Description:  The macros defined here provide the HAL APIs for handling
//               basic IO - specifically PCI config access.
//              
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/system.h>
#include CYGBLD_HAL_PLATFORM_H
 
#include <cyg/hal/pcmb_io.h>
 
//----------------------------------------------------------------------------
// The PCI resources required by the STPC 
// PCI Config registers in IO space
 
#define STPC_PCI_ADDR_REG  (0xCF8)
#define STPC_PCI_DATA_REG  (0xCFC)
 
//----------------------------------------------------------------------------
 
// Initialize the PCI bus.
#define HAL_PCI_INIT() \
CYG_MACRO_START    \
CYG_MACRO_END
 
//----------------------------------------------------------------------------
// Compute address necessary to access PCI config space for the given
// bus and device.
 
#define HAL_PCI_CONFIG_ADDRESS( __bus, __devfn, __offset )               \
	((1<<31) | ((__bus) << 16) | ((__devfn) << 8) | ((__offset) & ~3))               
 
//----------------------------------------------------------------------------
// Read a value from the PCI configuration space of the appropriate
// size at an address composed from the bus, devfn and offset.
 
#define HAL_PCI_CFG_READ_UINT32( __bus, __devfn, __offset, __val )                              \
CYG_MACRO_START                                                                                 \
    HAL_WRITE_UINT32(STPC_PCI_ADDR_REG,HAL_PCI_CONFIG_ADDRESS((__bus),(__devfn),(__offset)));   \
    HAL_READ_UINT32(STPC_PCI_DATA_REG,(__val));                                                 \
CYG_MACRO_END
 
#define HAL_PCI_CFG_READ_UINT8( __bus, __devfn, __offset, __val )                               \
CYG_MACRO_START                                                                                 \
    HAL_WRITE_UINT32(STPC_PCI_ADDR_REG,HAL_PCI_CONFIG_ADDRESS((__bus),(__devfn),(__offset)));   \
    HAL_READ_UINT8(STPC_PCI_DATA_REG + ((__offset)&3),(__val));                                 \
CYG_MACRO_END
 
#define HAL_PCI_CFG_READ_UINT16( __bus, __devfn, __offset, __val )                              \
CYG_MACRO_START                                                                                 \
    HAL_WRITE_UINT32(STPC_PCI_ADDR_REG,HAL_PCI_CONFIG_ADDRESS((__bus),(__devfn),(__offset)));   \
    HAL_READ_UINT16(STPC_PCI_DATA_REG + ((__offset)&2),(__val));                                \
CYG_MACRO_END
 
//----------------------------------------------------------------------------
// Write a value to the PCI configuration space of the appropriate
// size at an address composed from the bus, devfn and offset.
 
#define HAL_PCI_CFG_WRITE_UINT32( __bus, __devfn, __offset, __val )                             \
CYG_MACRO_START                                                                                 \
    HAL_WRITE_UINT32(STPC_PCI_ADDR_REG,HAL_PCI_CONFIG_ADDRESS((__bus),(__devfn),(__offset)));   \
    HAL_WRITE_UINT32(STPC_PCI_DATA_REG,(__val));                                                \
CYG_MACRO_END
 
#define HAL_PCI_CFG_WRITE_UINT8( __bus, __devfn, __offset, __val )                              \
CYG_MACRO_START                                                                                 \
    HAL_WRITE_UINT32(STPC_PCI_ADDR_REG,HAL_PCI_CONFIG_ADDRESS((__bus),(__devfn),(__offset)));   \
    HAL_WRITE_UINT8(STPC_PCI_DATA_REG+(__offset & 3),(__val));                                  \
CYG_MACRO_END
 
#define HAL_PCI_CFG_WRITE_UINT16( __bus, __devfn, __offset, __val )                             \
CYG_MACRO_START                                                                                 \
    HAL_WRITE_UINT32(STPC_PCI_ADDR_REG,HAL_PCI_CONFIG_ADDRESS((__bus),(__devfn),(__offset)));   \
    HAL_WRITE_UINT16(STPC_PCI_DATA_REG+(__offset & 2),(__val));                                 \
CYG_MACRO_END
 
 
//-----------------------------------------------------------------------------
// Resources
 
#ifdef CYGSEM_HAL_I386_PC_LARGE_PCI_SPACE
// Use unrestricted PCI space
#define CYG_PCI_MAX_BUS                     256
#define CYG_PCI_MIN_DEV                       0
#define CYG_PCI_MAX_DEV                      32
#define CYG_PCI_MAX_FN                        8
#endif
 
// This is where the PCI spaces are mapped in the CPU's address space.
// In the PC the PCI address space is mapped 1-1 into the CPU physical
// address space, so these values are both zero.
 
#define HAL_PCI_PHYSICAL_MEMORY_BASE    0x00000000
#define HAL_PCI_PHYSICAL_IO_BASE        0x0000
 
// Map PCI device resources starting from these addresses in PCI space.
// These are the addresses in PCI space where we should map device
// memory.  Since there is RAM and other devices in low memory and IO
// space, we allocate from high addresses. In most PC platforms, the
// BIOS will have actually allocated the PCI devices before we start,
// so these values are actually academic.
 
#define HAL_PCI_ALLOC_BASE_MEMORY  0xf0000000
#define HAL_PCI_ALLOC_BASE_IO      0xDF00
 
//----------------------------------------------------------------------------
// Translate the PCI interrupt requested by the device (INTA#, INTB#,
// INTC# or INTD#) to the associated CPU interrupt (i.e., HAL vector).
 
#define HAL_PCI_TRANSLATE_INTERRUPT( __bus, __devfn, __vec, __valid)            \
CYG_MACRO_START                                                                 \
	HAL_PCI_CFG_READ_UINT8((__bus),(__devfn),CYG_PCI_CFG_INT_LINE,(__vec)); \
	if(__vec<=15) __valid=1;                                                \
	else __valid=0;                                                         \
	__vec += 0x20;                                                          \
CYG_MACRO_END
 
//-----------------------------------------------------------------------------
// CMOS RAM access
 
#define HAL_CMOS_ADDRESS        0x70    // CMOS address register
#define HAL_CMOS_DATA           0x71    // CMOS data register
 
#define HAL_READ_CMOS( __addr, __val )                  \
CYG_MACRO_START                                         \
{                                                       \
    HAL_WRITE_UINT8( HAL_CMOS_ADDRESS, __addr );        \
    HAL_READ_UINT8( HAL_CMOS_DATA, (__val) );           \
}                                                       \
CYG_MACRO_END
 
#define HAL_WRITE_CMOS( __addr, __val )                 \
CYG_MACRO_START                                         \
{                                                       \
    HAL_WRITE_UINT8( HAL_CMOS_ADDRESS, __addr );        \
    HAL_WRITE_UINT8( HAL_CMOS_DATA, (__val) );          \
}                                                       \
CYG_MACRO_END
 
//-----------------------------------------------------------------------------
// Debug macros
// Some simple macros for writing useful info to a PC ASCII display
 
#define PC_WRITE_SCREEN( __pos, __ch ) \
                       (*((short *)(0xB8000)+((__pos)%(80*25))) = (0x0700+(__ch)))
 
#define PC_SCREEN_LINE( __line ) ((__line)*80)
 
#define PC_WRITE_SCREEN_8( __pos, __val )                       \
{                                                               \
    char __hex[] = "0123456789ABCDEF";                          \
    PC_WRITE_SCREEN( (__pos), __hex[((int)(__val)>>4)&0xF] );        \
    PC_WRITE_SCREEN( ((__pos)+1), __hex[(int)(__val)&0xF] );         \
}
 
#define PC_WRITE_SCREEN_16( __pos, __val )      \
    PC_WRITE_SCREEN_8( __pos, (int)(__val)>>8 );     \
    PC_WRITE_SCREEN_8( (__pos)+2, (int)(__val) );
 
#define PC_WRITE_SCREEN_32( __pos, __val )      \
    PC_WRITE_SCREEN_16( __pos, (int)(__val)>>16 );   \
    PC_WRITE_SCREEN_16( (__pos)+4, (int)(__val) );
 
//-----------------------------------------------------------------------------
// IDE interface macros
//
#define HAL_IDE_NUM_CONTROLLERS 2
 
// Initialize the IDE controller(s).
#define HAL_IDE_INIT()
 
#define __PCMB_IDE_PRI_CMD   0x1f0
#define __PCMB_IDE_PRI_CTL   0x3f4
#define __PCMB_IDE_SEC_CMD   0x170
#define __PCMB_IDE_SEC_CTL   0x374
 
#define __CMD_ADDR(__n) ((__n) ? __PCMB_IDE_SEC_CMD : __PCMB_IDE_PRI_CMD)
#define __CTL_ADDR(__n) ((__n) ? __PCMB_IDE_SEC_CTL : __PCMB_IDE_PRI_CTL)
 
#define HAL_IDE_READ_UINT8( __ctlr, __regno, __val )  \
    HAL_READ_UINT8(__CMD_ADDR(__ctlr) + (__regno), (__val))
#define HAL_IDE_READ_UINT16( __ctlr, __regno, __val )  \
    HAL_READ_UINT16(__CMD_ADDR(__ctlr) + (__regno), (__val))
#define HAL_IDE_READ_ALTSTATUS( __ctlr, __val )  \
    HAL_READ_UINT16(__CTL_ADDR(__ctlr) + 2, (__val))
 
#define HAL_IDE_WRITE_UINT8( __ctlr, __regno, __val )  \
    HAL_WRITE_UINT8(__CMD_ADDR(__ctlr) + (__regno), (__val))
#define HAL_IDE_WRITE_UINT16( __ctlr, __regno, __val )  \
    HAL_WRITE_UINT16(__CMD_ADDR(__ctlr) + (__regno), (__val))
#define HAL_IDE_WRITE_CONTROL( __ctlr, __val )  \
    HAL_WRITE_UINT16(__CTL_ADDR(__ctlr) + 2, (__val))
 
 
//-----------------------------------------------------------------------------
// end of pcmb_io.h
#endif // CYGONCE_PCMB_IO_H