URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [i386/] [pcmb/] [v2_0/] [src/] [pcmb_smp.c] - Rev 279
Go to most recent revision | Compare with Previous | Blame | View Log
//========================================================================== // // pcmb_smp.c // // HAL SMP implementation // //========================================================================== //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): nickg // Contributors: nickg // Date: 2001-08-03 // Purpose: HAL SMP implementation // Description: This file contains SMP support functions. // //####DESCRIPTIONEND#### // //========================================================================*/ #include <pkgconf/hal.h> #include <pkgconf/hal_i386.h> #include <pkgconf/hal_i386_pcmb.h> #ifdef CYGPKG_HAL_SMP_SUPPORT #ifdef CYGPKG_KERNEL #include <pkgconf/kernel.h> #endif #include <cyg/infra/cyg_type.h> // Base types #include <cyg/infra/cyg_trac.h> // tracing macros #include <cyg/infra/cyg_ass.h> // assertion macros #include <cyg/infra/diag.h> #include <cyg/hal/hal_intr.h> #include <cyg/hal/hal_io.h> #include <cyg/hal/hal_smp.h> // ------------------------------------------------------------------------ // Debugging/diagnostic controls // Setting this to 1 causes the parsing of the MP structures and the // initialization of the APIC and IOAPIC to be reported on the // diagnostic channel. #define SHOW_DIAGNOSTICS 0 // Setting this to 1 causes various things to be displayed on the PC // screen during normal operation. These are mostly for my own use, // and may be somewhat obscure to anyone else. #define SCREEN_DIAGNOSTICS 0 #if SCREEN_DIAGNOSTICS==0 #undef PC_WRITE_SCREEN #undef PC_WRITE_SCREEN_8 #undef PC_WRITE_SCREEN_16 #undef PC_WRITE_SCREEN_32 #define PC_WRITE_SCREEN( pos, ch ) #define PC_WRITE_SCREEN_8( pos, val ) #define PC_WRITE_SCREEN_16( pos, val ) #define PC_WRITE_SCREEN_32( pos, val ) #endif // ------------------------------------------------------------------------ static int streq( const char *s1, const char *s2 ) { while( *s1 == *s2 && *s1 && *s2 ) s1++,s2++; return !(*s2-*s1); } /*------------------------------------------------------------------------*/ // MP FPS structure: #define MP_FPS_SIGNATURE 0 #define MP_FPS_MPCT 4 #define MP_FPS_LENGTH 8 #define MP_FPS_REV 9 #define MP_FPS_CSUM 10 #define MP_FPS_FEATURE1 11 #define MP_FPS_FEATURE2 12 #define MP_FPS_FEATURE3 13 #define MP_FPS_FEATURE4 14 #define MP_FPS_FEATURE5 15 #define MP_FPS_SIZE 16 #define MP_FPS_SIGNATURE_VALUE 0x5f504d5f /*------------------------------------------------------------------------*/ // MP config table structure // Header structure: #define MPCT_HDR_SIGNATURE 0 #define MPCT_HDR_LENGTH 4 #define MPCT_HDR_REV 6 #define MPCT_HDR_CHECKSUM 7 #define MPCT_HDR_OEM_ID 8 #define MPCT_HDR_PROD_ID 16 #define MPCT_HDR_OEM_TAB 28 #define MPCT_HDR_OEM_TAB_SIZE 32 #define MPCT_HDR_ENTRY_COUNT 34 #define MPCT_HDR_LOCAL_APIC 36 #define MPCT_HDR_XTAB_LENGTH 40 #define MPCT_HDR_XTAB_CHECKSUM 42 #define MPCT_HDR_SIZE 44 #define MPCT_HDR_SIGNATURE_VAL 0x504d4350 #define MPCT_ENTRY_TYPE_PROCESSOR 0 #define MPCT_ENTRY_TYPE_BUS 1 #define MPCT_ENTRY_TYPE_IOAPIC 2 #define MPCT_ENTRY_TYPE_INTERRUPT_IO 3 #define MPCT_ENTRY_TYPE_INTERRUPT_LOCAL 4 #define MPCT_ENTRY_PROC_TYPE 0 #define MPCT_ENTRY_PROC_APIC_ID 1 #define MPCT_ENTRY_PROC_APIC_VER 2 #define MPCT_ENTRY_PROC_CPU_FLAGS 3 #define MPCT_ENTRY_PROC_CPU_SIGNATURE 4 #define MPCT_ENTRY_PROC_FEATURE_FLAGS 8 #define MPCT_ENTRY_PROC_RESERVED0 12 #define MPCT_ENTRY_PROC_RESERVED1 16 #define MPCT_ENTRY_PROC_SIZE 20 #define MPCT_ENTRY_BUS_TYPE 0 #define MPCT_ENTRY_BUS_ID 1 #define MPCT_ENTRY_BUS_TYPE_STRING 2 #define MPCT_ENTRY_BUS_SIZE 8 #define MPCT_ENTRY_IOAPIC_TYPE 0 #define MPCT_ENTRY_IOAPIC_ID 1 #define MPCT_ENTRY_IOAPIC_VER 2 #define MPCT_ENTRY_IOAPIC_FLAGS 3 #define MPCT_ENTRY_IOAPIC_ADDRESS 4 #define MPCT_ENTRY_IOAPIC_SIZE 8 #define MPCT_ENTRY_IOINT_TYPE 0 #define MPCT_ENTRY_IOINT_INT_TYPE 1 #define MPCT_ENTRY_IOINT_FLAGS 2 #define MPCT_ENTRY_IOINT_SOURCE_BUS 4 #define MPCT_ENTRY_IOINT_SOURCE_IRQ 5 #define MPCT_ENTRY_IOINT_DEST_APIC 6 #define MPCT_ENTRY_IOINT_DEST_INT 7 #define MPCT_ENTRY_IOINT_SIZE 8 #define MPCT_ENTRY_LOCINT_TYPE 0 #define MPCT_ENTRY_LOCINT_INT_TYPE 1 #define MPCT_ENTRY_LOCINT_FLAGS 2 #define MPCT_ENTRY_LOCINT_SOURCE_BUS 4 #define MPCT_ENTRY_LOCINT_SOURCE_IRQ 5 #define MPCT_ENTRY_LOCINT_DEST_APIC 6 #define MPCT_ENTRY_LOCINT_DEST_INT 7 #define MPCT_ENTRY_LOCINT_SIZE 8 /*------------------------------------------------------------------------*/ // Exported SMP configuration CYG_ADDRESS cyg_hal_smp_local_apic; CYG_ADDRESS cyg_hal_smp_io_apic; CYG_WORD32 cyg_hal_smp_cpu_count = 0; CYG_BYTE cyg_hal_smp_cpu_flags[HAL_SMP_CPU_MAX]; CYG_BYTE cyg_hal_isa_bus_id = 0xff; CYG_BYTE cyg_hal_isa_bus_irq[16]; CYG_BYTE cyg_hal_pci_bus_id = 0xff; CYG_BYTE cyg_hal_pci_bus_irq[4]; HAL_SPINLOCK_TYPE cyg_hal_ioapic_lock; /*------------------------------------------------------------------------*/ // Statics static CYG_ADDRESS mp_fps; static CYG_ADDRESS mpct; /*------------------------------------------------------------------------*/ static CYG_WORD32 mp_checksum(CYG_BYTE *p, CYG_WORD32 len) { CYG_WORD32 sum = 0; while (len--) sum += *p++; return sum & 0xFF; } /*------------------------------------------------------------------------*/ static cyg_bool cyg_hal_scan_smp_config( CYG_ADDRESS base, CYG_ADDRWORD size ) { #if SHOW_DIAGNOSTICS diag_printf("Scan for MP struct: %08x..%08x\n",base,base+size); #endif while( size > 0 ) { CYG_WORD32 sig; HAL_READMEM_UINT32( base, sig ); if( sig == MP_FPS_SIGNATURE_VALUE ) { CYG_BYTE val8; // We have a candidate for the floating structure #if SHOW_DIAGNOSTICS diag_printf("MP_FPS candidate found at %08x\n",base); #endif HAL_READMEM_UINT8( base+MP_FPS_LENGTH, val8 ); if( val8 != 1 ) break; HAL_READMEM_UINT8( base+MP_FPS_REV, val8 ); if( val8 != 1 && val8 != 4 ) break; if( mp_checksum( (CYG_BYTE *)base, MP_FPS_SIZE ) != 0 ) break; mp_fps = base; HAL_READMEM_UINT32( base+MP_FPS_MPCT, mpct ); #if SHOW_DIAGNOSTICS diag_printf("MPCT at %08x\n",mpct); #endif return 1; } base += 16; size -= 16; } return 0; } /*------------------------------------------------------------------------*/ static cyg_bool cyg_hal_find_smp_config( void ) { // check bottom 1k if( cyg_hal_scan_smp_config(0x00000, 0x00400 ) ) return 1; // check top 1k of RAM if( cyg_hal_scan_smp_config(0x9fc00, 0x00400 ) ) return 1; // check BIOS ROM if( cyg_hal_scan_smp_config(0xf0000, 0x10000 ) ) return 1; } /*------------------------------------------------------------------------*/ static cyg_bool cyg_hal_parse_smp_config( void ) { CYG_WORD32 val32; CYG_WORD16 val16; CYG_BYTE val8; int i; #if SHOW_DIAGNOSTICS { diag_printf("FPS address: %08x\n",mp_fps); HAL_READMEM_UINT32( mp_fps+MP_FPS_SIGNATURE, val32); diag_printf("FPS signature: %08x\n",val32); HAL_READMEM_UINT32( mp_fps+MP_FPS_MPCT, val32); diag_printf("FPS MPCT address: %08x\n",val32); HAL_READMEM_UINT8( mp_fps+MP_FPS_LENGTH, val8); diag_printf("FPS length: %02x\n",val8); HAL_READMEM_UINT8( mp_fps+MP_FPS_REV, val8); diag_printf("FPS spec rev: %02x\n",val8); HAL_READMEM_UINT8( mp_fps+MP_FPS_CSUM, val8); diag_printf("FPS checksum: %02x\n",val8); for( i = 0; i < 5; i++ ) { HAL_READMEM_UINT8( mp_fps+MP_FPS_FEATURE1, val8); diag_printf("FPS feature byte %d: %02x\n",i,val8); } } #endif if( mpct ) { HAL_READMEM_UINT32( mpct+MPCT_HDR_SIGNATURE, val32); if( val32 != MPCT_HDR_SIGNATURE_VAL ) return 0; HAL_READMEM_UINT16( mpct+MPCT_HDR_LENGTH, val16); if( mp_checksum( (CYG_BYTE *)mpct, val16 ) != 0 ) return 0; #if SHOW_DIAGNOSTICS { char id[13]; diag_printf("MPCT address: %08x\n",mpct); HAL_READMEM_UINT32( mpct+MPCT_HDR_SIGNATURE, val32); diag_printf("MPCT signature: %08x\n",val32); HAL_READMEM_UINT16( mpct+MPCT_HDR_LENGTH, val16); diag_printf("MPCT length: %04x\n",val16); HAL_READMEM_UINT8( mpct+MPCT_HDR_REV, val8); diag_printf("MPCT spec rev: %02x\n",val8); HAL_READMEM_UINT8( mpct+MPCT_HDR_CHECKSUM, val8); diag_printf("MPCT checksum: %02x\n",val8); for( i = 0; i < 8; i++ ) { HAL_READMEM_UINT8( mpct+MPCT_HDR_OEM_ID+i, val8); id[i] = val8; } id[i] = 0; diag_printf("MPCT OEM Id: %s\n",id); for( i = 0; i < 12; i++ ) { HAL_READMEM_UINT8( mpct+MPCT_HDR_PROD_ID+i, val8); id[i] = val8; } id[i] = 0; diag_printf("MPCT Product Id: %s\n",id); HAL_READMEM_UINT32( mpct+MPCT_HDR_OEM_TAB, val32); diag_printf("MPCT OEM table: %08x\n",val32); HAL_READMEM_UINT16( mpct+MPCT_HDR_OEM_TAB_SIZE, val16); diag_printf("MPCT OEM table size: %04x\n",val16); HAL_READMEM_UINT16( mpct+MPCT_HDR_ENTRY_COUNT, val16); diag_printf("MPCT entry count: %04x\n",val16); HAL_READMEM_UINT32( mpct+MPCT_HDR_LOCAL_APIC, val32); diag_printf("MPCT local APIC: %08x\n",val32); HAL_READMEM_UINT16( mpct+MPCT_HDR_XTAB_LENGTH, val16); diag_printf("MPCT extended table length: %04x\n",val16); HAL_READMEM_UINT8( mpct+MPCT_HDR_XTAB_CHECKSUM, val8); diag_printf("MPCT extended table checksum: %02x\n",val8); } #endif // Extract the data we need from the structure HAL_READMEM_UINT32( mpct+MPCT_HDR_LOCAL_APIC, cyg_hal_smp_local_apic); // now parse the base table, looking for processor and IOAPIC entries. { CYG_WORD16 entries; CYG_ADDRESS entry = mpct + MPCT_HDR_SIZE; HAL_READMEM_UINT16( mpct+MPCT_HDR_ENTRY_COUNT, entries); #if SHOW_DIAGNOSTICS diag_printf("\nBase table:\n"); #endif while( entries-- ) { CYG_BYTE type; HAL_READMEM_UINT8( entry, type ); switch( type ) { case MPCT_ENTRY_TYPE_PROCESSOR: #if SHOW_DIAGNOSTICS diag_printf(" Processor\n"); HAL_READMEM_UINT8( entry+MPCT_ENTRY_PROC_APIC_ID, val8 ); diag_printf(" APIC ID: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_PROC_APIC_VER, val8 ); diag_printf(" APIC Version: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_PROC_CPU_FLAGS, val8 ); diag_printf(" CPU Flags: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_PROC_CPU_SIGNATURE, val32 ); diag_printf(" CPU Signature: %08x\n",val32); HAL_READMEM_UINT8( entry+MPCT_ENTRY_PROC_FEATURE_FLAGS, val32 ); diag_printf(" Feature flags: %08x\n",val32); #endif { CYG_BYTE cpuid; // Index CPUs by their APIC IDs HAL_READMEM_UINT8( entry+MPCT_ENTRY_PROC_APIC_ID, cpuid ); // Get flags for this CPU. HAL_READMEM_UINT8(entry+MPCT_ENTRY_PROC_CPU_FLAGS, cyg_hal_smp_cpu_flags[cpuid]); cyg_hal_smp_cpu_count++; // count another CPU } entry += MPCT_ENTRY_PROC_SIZE; break; case MPCT_ENTRY_TYPE_BUS: { CYG_BYTE id; char bustype[7]; HAL_READMEM_UINT8( entry+MPCT_ENTRY_BUS_ID, id ); #if SHOW_DIAGNOSTICS diag_printf(" Bus\n"); diag_printf(" ID: %02x\n",id); #endif { int i; for( i = 0; i < 6; i++ ) { HAL_READMEM_UINT8( entry+MPCT_ENTRY_BUS_TYPE_STRING+i, val8 ); bustype[i] = val8; } bustype[i] = 0; #if SHOW_DIAGNOSTICS diag_printf(" Type: %s\n",&bustype[0]); #endif } if( streq( bustype, "ISA " ) ) { cyg_hal_isa_bus_id = id; for( i = 0; i < 16; i++ ) cyg_hal_isa_bus_irq[i] = 100; } if( streq( bustype, "PCI " ) ) { cyg_hal_pci_bus_id = id; } } entry += MPCT_ENTRY_BUS_SIZE; break; case MPCT_ENTRY_TYPE_IOAPIC: #if SHOW_DIAGNOSTICS diag_printf(" I/O APIC\n"); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOAPIC_ID, val8 ); diag_printf(" ID: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOAPIC_VER, val8 ); diag_printf(" Version: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOAPIC_FLAGS, val8 ); diag_printf(" Flags: %02x\n",val8); HAL_READMEM_UINT32( entry+MPCT_ENTRY_IOAPIC_ADDRESS, val32 ); diag_printf(" Address: %08x\n",val32); #endif HAL_READMEM_UINT32( entry+MPCT_ENTRY_IOAPIC_ADDRESS, cyg_hal_smp_io_apic ); entry += MPCT_ENTRY_IOAPIC_SIZE; break; case MPCT_ENTRY_TYPE_INTERRUPT_IO: { CYG_BYTE bus, irq, dst; HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_SOURCE_BUS, bus ); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_SOURCE_IRQ, irq ); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_DEST_INT, dst ); #if SHOW_DIAGNOSTICS diag_printf(" I/O interrupt assignment\n"); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_TYPE, val8 ); diag_printf(" Type: %02x\n",val8); HAL_READMEM_UINT16( entry+MPCT_ENTRY_IOINT_TYPE, val16 ); diag_printf(" Flags: %04x\n",val16); diag_printf(" Source bus: %02x\n",bus); diag_printf(" Source IRQ: %02x\n",irq); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_DEST_APIC, val8 ); diag_printf(" Dest APIC: %02x\n",val8); diag_printf(" Dest Interrupt: %02x\n",dst); #endif if( bus == cyg_hal_isa_bus_id ) cyg_hal_isa_bus_irq[irq] = dst; // if( bus == cyg_hal_pci_bus_id ) // cyg_hal_pci_bus_irq[irq] = dst; } entry += MPCT_ENTRY_IOINT_SIZE; break; case MPCT_ENTRY_TYPE_INTERRUPT_LOCAL: #if SHOW_DIAGNOSTICS diag_printf(" Local interrupt assignment\n"); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_TYPE, val8 ); diag_printf(" Type: %02x\n",val8); HAL_READMEM_UINT16( entry+MPCT_ENTRY_IOINT_TYPE, val16 ); diag_printf(" Flags: %04x\n",val16); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_SOURCE_BUS, val8 ); diag_printf(" Source bus: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_SOURCE_IRQ, val8 ); diag_printf(" Source IRQ: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_DEST_APIC, val8 ); diag_printf(" Dest APIC: %02x\n",val8); HAL_READMEM_UINT8( entry+MPCT_ENTRY_IOINT_DEST_INT, val8 ); diag_printf(" Dest Interrupt: %02x\n",val8); #endif entry += MPCT_ENTRY_LOCINT_SIZE; break; default: #if SHOW_DIAGNOSTICS diag_printf(" MPCT Entry: unknown type %02x\n",type); #endif entry += 8; break; } } } } #if SHOW_DIAGNOSTICS diag_printf("Exported configuration:\n"); diag_printf(" Local APIC: %08x\n", cyg_hal_smp_local_apic ); diag_printf(" I/O APIC: %08x\n", cyg_hal_smp_io_apic ); diag_printf(" CPU count: %d\n", cyg_hal_smp_cpu_count ); for( i = 0; i < cyg_hal_smp_cpu_count; i++ ) { diag_printf(" CPU %d %sactive %s\n",i, ((cyg_hal_smp_cpu_flags[i]&1)?"":"in"), ((cyg_hal_smp_cpu_flags[i]&2)?"master":"slave") ); } diag_printf(" ISA IRQ map:\n"); for( i = 0; i < 16; i++ ) { diag_printf(" IRQ %2d -> IOAPIC INT %2d\n",i,cyg_hal_isa_bus_irq[i]); } #endif return 1; } /*------------------------------------------------------------------------*/ // Init local APIC static cyg_bool cyg_hal_smp_init_apic(void) { cyg_uint32 maxlvt; cyg_uint32 val; HAL_SMP_CPU_TYPE cpu; HAL_APIC_READ(HAL_APIC_ID, val ); cpu = val>>24; #if SHOW_DIAGNOSTICS diag_printf("Local APIC: %08x\n",cyg_hal_smp_local_apic); diag_printf(" ID: %08x\n",val); #endif // get max local vector table entry offset HAL_APIC_READ(HAL_APIC_VER, maxlvt ); #if SHOW_DIAGNOSTICS diag_printf(" VERSION: %08x\n",maxlvt); #endif maxlvt >>= 16; maxlvt &= 0xFF; #if SHOW_DIAGNOSTICS diag_printf("maxlvt = %d\n",maxlvt); #endif // Start by ensuring that all interrupt sources are disabled. The // following code ensures that this happens cleanly. // Local timer vector HAL_APIC_READ( HAL_APIC_LVT_TIMER, val ); val |= HAL_APIC_LVT_MASK ; HAL_APIC_WRITE( HAL_APIC_LVT_TIMER, val ); #if SHOW_DIAGNOSTICS diag_printf(" APIC_LVT_TIMER: %08x\n",val); #endif // Local interrupt vectors HAL_APIC_READ( HAL_APIC_LVT_INT0, val ); val |= HAL_APIC_LVT_MASK ; HAL_APIC_WRITE( HAL_APIC_LVT_INT0, val ); #if SHOW_DIAGNOSTICS diag_printf(" APIC_LVT_INT0: %08x\n",val); #endif HAL_APIC_READ( HAL_APIC_LVT_INT1, val ); val |= HAL_APIC_LVT_MASK ; HAL_APIC_WRITE( HAL_APIC_LVT_INT1, val ); #if SHOW_DIAGNOSTICS diag_printf(" APIC_LVT_INT1: %08x\n",val); #endif if (maxlvt >= 3 ) { HAL_APIC_READ( HAL_APIC_LVT_ERROR, val ); val |= HAL_APIC_LVT_MASK ; HAL_APIC_WRITE( HAL_APIC_LVT_ERROR, val ); #if SHOW_DIAGNOSTICS diag_printf(" APIC_LVT_ERROR: %08x\n",val); #endif } if (maxlvt >= 4 ) { HAL_APIC_READ( HAL_APIC_LVT_PC, val ); val |= HAL_APIC_LVT_MASK ; HAL_APIC_WRITE( HAL_APIC_LVT_PC, val ); #if SHOW_DIAGNOSTICS diag_printf(" APIC_LVT_PC: %08x\n",val); #endif } // Now initialize the local vector table. HAL_APIC_WRITE( HAL_APIC_LVT_TIMER, HAL_APIC_LVT_MASK ); HAL_APIC_WRITE( HAL_APIC_LVT_INT0, HAL_APIC_LVT_MASK ); HAL_APIC_WRITE( HAL_APIC_LVT_INT1, HAL_APIC_LVT_MASK ); if( maxlvt >= 3 ) HAL_APIC_WRITE( HAL_APIC_LVT_ERROR, HAL_APIC_LVT_MASK ); if( maxlvt >= 4 ) HAL_APIC_WRITE( HAL_APIC_LVT_PC, HAL_APIC_LVT_MASK ); // Set up DFR to flat delivery mode. HAL_APIC_WRITE( HAL_APIC_DFR, 0xffffffff ); // Set up logical destination id. We set bit 1<<cpuid in the LDR // register. HAL_APIC_READ( HAL_APIC_LDR, val ); val |= 1<<(cpu+24); HAL_APIC_WRITE( HAL_APIC_LDR, val ); // Set TPR register to accept all. HAL_APIC_WRITE( HAL_APIC_TPR, 0 ); // Enable APIC in SPIV HAL_APIC_WRITE( HAL_APIC_SPIV, 0x00000100 ); if( cyg_hal_smp_cpu_flags[HAL_SMP_CPU_THIS()] & 2 ) { // This is the boot CPU, switch its PIC into APIC mode // Non-boot CPUs are already in APIC mode. HAL_WRITE_UINT8( 0x22, 0x70 ); HAL_WRITE_UINT8( 0x23, 0x01 ); } return 1; } /*------------------------------------------------------------------------*/ // Initialize I/O APIC static cyg_bool cyg_hal_smp_init_ioapic(void) { CYG_WORD32 val; cyg_uint32 tabsize = 0; int i; HAL_SMP_CPU_TYPE cpu_this = HAL_SMP_CPU_THIS(); HAL_SPINLOCK_CLEAR( cyg_hal_ioapic_lock ); HAL_SPINLOCK_SPIN( cyg_hal_ioapic_lock ); HAL_IOAPIC_READ( HAL_IOAPIC_REG_APICVER, val ); tabsize = (val>>16)&0xFF; // Set up ISA interrupts for( i = 0; i < 16; i++ ) { if( cyg_hal_isa_bus_irq[i] != 100 ) { CYG_WORD32 tehi = 0, telo = 0x00010000; tehi |= cpu_this<<24; telo |= CYGNUM_HAL_ISR_MIN+i; HAL_IOAPIC_WRITE( HAL_IOAPIC_REG_REDIR_LO(cyg_hal_isa_bus_irq[i]), telo ); HAL_IOAPIC_WRITE( HAL_IOAPIC_REG_REDIR_HI(cyg_hal_isa_bus_irq[i]), tehi ); } } #if SHOW_DIAGNOSTICS diag_printf("I/O APIC: %08x\n",cyg_hal_smp_io_apic); HAL_IOAPIC_READ( HAL_IOAPIC_REG_APICID, val ); diag_printf(" ID: %08x\n",val); HAL_IOAPIC_READ( HAL_IOAPIC_REG_APICVER, val ); diag_printf(" VER: %08x\n",val); HAL_IOAPIC_READ( HAL_IOAPIC_REG_APICARB, val ); diag_printf(" ARB: %08x\n",val); diag_printf(" Redirection Table:\n"); for( i = 0; i < tabsize; i++ ) { CYG_WORD32 tehi, telo; HAL_IOAPIC_READ( HAL_IOAPIC_REG_REDIR_LO(i), telo ); HAL_IOAPIC_READ( HAL_IOAPIC_REG_REDIR_HI(i), tehi ); diag_printf(" %02d: %08x %08x\n",i,tehi,telo); } #endif HAL_SPINLOCK_CLEAR( cyg_hal_ioapic_lock ); return 1; } /*------------------------------------------------------------------------*/ static volatile CYG_WORD32 init_deasserted; __externC volatile CYG_WORD32 cyg_hal_smp_cpu_sync_flag[HAL_SMP_CPU_MAX]; __externC volatile CYG_WORD32 cyg_hal_smp_cpu_sync[HAL_SMP_CPU_MAX]; __externC volatile void (*cyg_hal_smp_cpu_entry[HAL_SMP_CPU_MAX])(void); __externC volatile CYG_WORD32 cyg_hal_smp_vsr_sync_flag; __externC volatile CYG_WORD32 cyg_hal_smp_cpu_running[HAL_SMP_CPU_MAX]; /*------------------------------------------------------------------------*/ __externC void cyg_hal_smp_start(void); __externC CYG_BYTE cyg_hal_slave_trampoline[]; __externC CYG_BYTE cyg_hal_slave_trampoline_end[]; #define HAL_SLAVE_START_ADDRESS 0x00002000 __externC void cyg_hal_cpu_start( HAL_SMP_CPU_TYPE cpu ) { #if 1 CYG_WORD32 icrlo, icrhi; CYG_BYTE *p = &cyg_hal_slave_trampoline[0]; CYG_BYTE *q = (CYG_BYTE *)HAL_SLAVE_START_ADDRESS; CYG_BYTE old_cmos; int i; // Copy the trampoline over... do { *q++ = *p++; } while( p != &cyg_hal_slave_trampoline_end[0]); // Init synchronization spinlock to locked to halt slave CPU in // cyg_hal_smp_startup(). init_deasserted = 0; // We now have to execute the grungy and unpleasant AP startup // sequence to get the cpu running. I'm sure that not all of this // is strictly necessary, but it works and it is too much effort // to work out the minimal subset. // Write warm-reset code into CMOS RAM and write the address of // the trampoline entry point into location 40:67. HAL_READ_CMOS( 0x0f, old_cmos ); HAL_WRITE_CMOS( 0x0f, 0x0a ); HAL_WRITEMEM_UINT16( 0x467, HAL_SLAVE_START_ADDRESS & 0xf ); HAL_WRITEMEM_UINT16( 0x469, HAL_SLAVE_START_ADDRESS>>4 ); // Send an INIT interrupt to the dest CPU icrhi = cpu<<24; icrlo = 0x0000C500; HAL_APIC_WRITE( HAL_APIC_ICR_HI, icrhi ); HAL_APIC_WRITE( HAL_APIC_ICR_LO, icrlo ); hal_delay_us( 10 * 1000 ); // Wait 10ms // Wait for the ICR to become inactive do { HAL_APIC_READ( HAL_APIC_ICR_LO, icrlo ); } while( (icrlo & 0x00001000) != 0 ); // Now de-assert INIT icrlo = 0x00008500; HAL_APIC_WRITE( HAL_APIC_ICR_HI, icrhi ); HAL_APIC_WRITE( HAL_APIC_ICR_LO, icrlo ); init_deasserted = 1; // Now we send two STARTUP IPIs for( i = 0; i < 2; i++ ) { icrlo = 0x00000600 | (HAL_SLAVE_START_ADDRESS>>12); // Send the STARTUP IPI HAL_APIC_WRITE( HAL_APIC_ICR_HI, icrhi ); HAL_APIC_WRITE( HAL_APIC_ICR_LO, icrlo ); hal_delay_us( 300 ); // Wait for the ICR to become inactive do { HAL_APIC_READ( HAL_APIC_ICR_LO, icrlo ); } while( (icrlo & 0x00001000) != 0 ); hal_delay_us( 300 ); } HAL_WRITE_CMOS( 0x0f, old_cmos ); // PC_WRITE_SCREEN( PC_SCREEN_LINE(5)+0, '!' ); hal_delay_us( 300 ); // PC_WRITE_SCREEN( PC_SCREEN_LINE(5)+1, '!' ); #endif } /*------------------------------------------------------------------------*/ __externC void cyg_hal_smp_start(void); __externC void cyg_hal_smp_startup(void); __externC void cyg_hal_cpu_release( HAL_SMP_CPU_TYPE cpu ) { // PC_WRITE_SCREEN( PC_SCREEN_LINE(13), '!' ); // PC_WRITE_SCREEN_8( PC_SCREEN_LINE(13), cpu ); cyg_hal_smp_cpu_entry[cpu] = cyg_hal_smp_start; while( cyg_hal_smp_cpu_entry[cpu] != 0 ) { // PC_WRITE_SCREEN_32( PC_SCREEN_LINE(13)+4, cyg_hal_smp_cpu_entry[cpu] ); hal_delay_us( 100 ); continue; } } /*------------------------------------------------------------------------*/ __externC void cyg_hal_smp_startup(void) { HAL_SMP_CPU_TYPE cpu; // PC_WRITE_SCREEN( PC_SCREEN_LINE(2)+0, '!' ); #ifndef CYG_HAL_STARTUP_RAM // Wait for INIT interrupt to be deasserted while( !init_deasserted ) continue; #endif // PC_WRITE_SCREEN( PC_SCREEN_LINE(2)+1, '!' ); cpu = HAL_SMP_CPU_THIS(); // PC_WRITE_SCREEN_8( PC_SCREEN_LINE(2)+6, cpu ); #ifndef CYG_HAL_STARTUP_RAM // Wait 1s for the world to settle hal_delay_us( 1000000 ); // PC_WRITE_SCREEN( PC_SCREEN_LINE(2)+2, '!' ); // Setup our APIC cyg_hal_smp_init_apic(); #endif // PC_WRITE_SCREEN( PC_SCREEN_LINE(2)+3, '!' ); #ifdef CYGPKG_KERNEL_SMP_SUPPORT cyg_hal_smp_cpu_running[cpu] = 1; cyg_kernel_smp_startup(); #else for(;;) { void (*entry)(void); while( (entry = cyg_hal_smp_cpu_entry[cpu]) == 0 ) { #if 0 //SCREEN_DIAGNOSTICS static int n; PC_WRITE_SCREEN_8( PC_SCREEN_LINE(2)+10, n ); PC_WRITE_SCREEN_8( PC_SCREEN_LINE(2)+15, cyg_hal_smp_cpu_sync[cpu] ); PC_WRITE_SCREEN_8( PC_SCREEN_LINE(2)+30, cyg_hal_smp_cpu_sync_flag[0] ); PC_WRITE_SCREEN_8( PC_SCREEN_LINE(2)+35, cyg_hal_smp_cpu_sync_flag[1] ); PC_WRITE_SCREEN_8( PC_SCREEN_LINE(2)+40, cyg_hal_smp_vsr_sync_flag ); n++; #endif hal_delay_us( 100 ); } // PC_WRITE_SCREEN( PC_SCREEN_LINE(2)+4, '!' ); cyg_hal_smp_cpu_entry[cpu] = 0; // PC_WRITE_SCREEN_32( PC_SCREEN_LINE(2)+20, entry ); if( entry != NULL ) { cyg_hal_smp_cpu_running[cpu] = 1; entry(); } } #endif } /*------------------------------------------------------------------------*/ __externC void cyg_hal_smp_init(void) { if( !cyg_hal_find_smp_config() ) return; if( !cyg_hal_parse_smp_config() ) return; if( !cyg_hal_smp_init_apic() ) return; if( !cyg_hal_smp_init_ioapic() ) return; } /*------------------------------------------------------------------------*/ __externC void cyg_hal_smp_cpu_start_all(void) { HAL_SMP_CPU_TYPE cpu; for( cpu = 0; cpu < HAL_SMP_CPU_COUNT(); cpu++ ) { cyg_hal_smp_cpu_sync[cpu] = 0; cyg_hal_smp_cpu_sync_flag[cpu] = 0; cyg_hal_smp_cpu_running[cpu] = 0; cyg_hal_smp_cpu_entry[cpu] = 0; if( cpu != HAL_SMP_CPU_THIS() ) cyg_hal_cpu_start( cpu ); else cyg_hal_smp_cpu_running[cpu] = 1; } } /*------------------------------------------------------------------------*/ // SMP message buffers. // SMP CPUs pass messages to eachother via a small circular buffer // protected by a spinlock. Each message is a single 32 bit word with // a type code in the top 4 bits and any argument in the remaining // 28 bits. #define SMP_MSGBUF_SIZE 4 static struct smp_msg_t { HAL_SPINLOCK_TYPE lock; // protecting spinlock volatile CYG_WORD32 msgs[SMP_MSGBUF_SIZE]; // message buffer volatile CYG_WORD32 head; // head of list volatile CYG_WORD32 tail; // tail of list volatile CYG_WORD32 reschedule; // reschedule request volatile CYG_WORD32 timeslice; // timeslice request } smp_msg[HAL_SMP_CPU_MAX]; /*------------------------------------------------------------------------*/ // Pass a message to another CPU. #if SCREEN_DIAGNOSTICS static int res_msgs[2], tms_msgs[2]; #endif __externC void cyg_hal_cpu_message( HAL_SMP_CPU_TYPE cpu, CYG_WORD32 msg, CYG_WORD32 arg, CYG_WORD32 wait) { #if 1 CYG_INTERRUPT_STATE istate; struct smp_msg_t *m = &smp_msg[cpu]; int i; HAL_SMP_CPU_TYPE me = HAL_SMP_CPU_THIS(); HAL_DISABLE_INTERRUPTS( istate ); // Get access to the message buffer for the selected CPU HAL_SPINLOCK_SPIN( m->lock ); #if 0 //SCREEN_DIAGNOSTICS if( msg == HAL_SMP_MESSAGE_RESCHEDULE ) res_msgs[me]++; else if( msg == HAL_SMP_MESSAGE_TIMESLICE ) tms_msgs[me]++; PC_WRITE_SCREEN_8( PC_SCREEN_LINE(18+me), me); PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+40, res_msgs[me]); PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+45, tms_msgs[me]); #endif if( msg == HAL_SMP_MESSAGE_RESCHEDULE ) m->reschedule = true; else if( msg == HAL_SMP_MESSAGE_TIMESLICE ) m->timeslice = true; else { CYG_WORD32 next = (m->tail + 1) & (SMP_MSGBUF_SIZE-1); // If the buffer is full, wait for space to appear in it. // This should only need to be done very rarely. while( next == m->head ) { HAL_SPINLOCK_CLEAR( m->lock ); for( i = 0; i < 1000; i++ ); HAL_SPINLOCK_SPIN( m->lock ); } m->msgs[m->tail] = msg | arg; m->tail = next; } // Now send an interrupt to the CPU. // PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+50, cyg_hal_smp_cpu_running[cpu] ); if( cyg_hal_smp_cpu_running[cpu] ) { CYG_WORD32 icrlo, icrhi; // Set the ICR fields we want to write. Most fields are zero // except the destination in the high word and the vector // number in the low. icrhi = cpu<<24; icrlo = CYGNUM_HAL_SMP_CPU_INTERRUPT_VECTOR( cpu ); // Write the ICR register. The interrupt will be raised when // the low word is written. HAL_APIC_WRITE( HAL_APIC_ICR_HI, icrhi ); HAL_APIC_WRITE( HAL_APIC_ICR_LO, icrlo ); // Wait for the ICR to become inactive do { #if 0 //SCREEN_DIAGNOSTICS static int n; PC_WRITE_SCREEN_8( PC_SCREEN_LINE(18+me)+55, n ); n++; #endif HAL_APIC_READ( HAL_APIC_ICR_LO, icrlo ); } while( (icrlo & 0x00001000) != 0 ); } HAL_SPINLOCK_CLEAR( m->lock ); // If we are expected to wait for the command to complete, then // spin here until it does. We actually wait for the destination // CPU to empty its input buffer. So we might wait for messages // from other CPUs as well. But this is benign. while(wait) { for( i = 0; i < 1000; i++ ); HAL_SPINLOCK_SPIN( m->lock ); if( m->head == m->tail ) wait = false; HAL_SPINLOCK_CLEAR( m->lock ); } HAL_RESTORE_INTERRUPTS( istate ); #endif } /*------------------------------------------------------------------------*/ #if SCREEN_DIAGNOSTICS static int isrs[2]; static int dsrs[2]; #endif __externC CYG_WORD32 cyg_hal_cpu_message_isr( CYG_WORD32 vector, CYG_ADDRWORD data ) { HAL_SMP_CPU_TYPE me = HAL_SMP_CPU_THIS(); struct smp_msg_t *m = &smp_msg[me]; CYG_WORD32 ret = 1; CYG_INTERRUPT_STATE istate; HAL_DISABLE_INTERRUPTS( istate ); HAL_SPINLOCK_SPIN( m->lock ); // First, acknowledge the interrupt. HAL_INTERRUPT_ACKNOWLEDGE( vector ); #if SCREEN_DIAGNOSTICS isrs[me]++; PC_WRITE_SCREEN_8( PC_SCREEN_LINE(18+me), me); PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+5, isrs[me]); #endif if( m->reschedule || m->timeslice ) ret |= 2; // Ask for the DSR to be called. // Now pick messages out of the buffer and handle them while( m->head != m->tail ) { CYG_WORD32 msg = m->msgs[m->head]; switch( msg & HAL_SMP_MESSAGE_TYPE ) { case HAL_SMP_MESSAGE_RESCHEDULE: ret |= 2; // Ask for the DSR to be called. break; case HAL_SMP_MESSAGE_MASK: // Mask the supplied vector // cyg_hal_interrupt_set_mask( msg&HAL_SMP_MESSAGE_ARG, false ); break; case HAL_SMP_MESSAGE_UNMASK: // Unmask the supplied vector // cyg_hal_interrupt_set_mask( msg&HAL_SMP_MESSAGE_ARG, true ); break; case HAL_SMP_MESSAGE_REVECTOR: // Deal with a change of CPU assignment for a vector. We // only actually worry about what happens when the vector // is changed to some other CPU. We just mask the // interrupt locally. // if( hal_interrupt_cpu[msg&HAL_SMP_MESSAGE_ARG] != me ) // cyg_hal_interrupt_set_mask( msg&HAL_SMP_MESSAGE_ARG, false ); break; } // Update the head pointer after handling the message, so that // the wait in cyg_hal_cpu_message() completes after the action // requested. m->head = (m->head + 1) & (SMP_MSGBUF_SIZE-1); } HAL_SPINLOCK_CLEAR( m->lock ); HAL_RESTORE_INTERRUPTS( istate ); return ret; } /*------------------------------------------------------------------------*/ // CPU message DSR. // This is only executed if the message was // HAL_SMP_MESSAGE_RESCHEDULE. It calls up into the kernel to effect a // reschedule. __externC void cyg_scheduler_set_need_reschedule(void); __externC void cyg_scheduler_timeslice_cpu(void); #if SCREEN_DIAGNOSTICS __externC int cyg_scheduler_sched_lock; static int rescheds[2]; static int timeslices[2]; #endif __externC CYG_WORD32 cyg_hal_cpu_message_dsr( CYG_WORD32 vector, CYG_ADDRWORD data ) { HAL_SMP_CPU_TYPE me = HAL_SMP_CPU_THIS(); struct smp_msg_t *m = &smp_msg[me]; CYG_INTERRUPT_STATE istate; CYG_WORD32 reschedule, timeslice; HAL_DISABLE_INTERRUPTS( istate ); HAL_SPINLOCK_SPIN( m->lock ); #if SCREEN_DIAGNOSTICS dsrs[me]++; PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+10, dsrs[me]); PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+15, cyg_scheduler_sched_lock); #endif reschedule = m->reschedule; timeslice = m->timeslice; m->reschedule = m->timeslice = false; HAL_SPINLOCK_CLEAR( m->lock ); HAL_RESTORE_INTERRUPTS( istate ); if( reschedule ) { #if SCREEN_DIAGNOSTICS rescheds[me]++; PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+20, rescheds[me]); #endif cyg_scheduler_set_need_reschedule(); } if( timeslice ) { #if SCREEN_DIAGNOSTICS timeslices[me]++; PC_WRITE_SCREEN_16( PC_SCREEN_LINE(18+me)+25, timeslices[me]); #endif cyg_scheduler_timeslice_cpu(); } return 0; } /*------------------------------------------------------------------------*/ #if SCREEN_DIAGNOSTICS static int x = 0; #endif __externC void cyg_hal_smp_halt_other_cpus(void) { int i; HAL_SMP_CPU_TYPE me = HAL_SMP_CPU_THIS(); // PC_WRITE_SCREEN_8( PC_SCREEN_LINE(6+me), me ); for( i = 0 ; i < HAL_SMP_CPU_COUNT(); i++ ) { if( i != me && cyg_hal_smp_cpu_running[i] ) { CYG_WORD32 icrhi, icrlo; CYG_WORD32 oldsync; // PC_WRITE_SCREEN_8( PC_SCREEN_LINE(6+me)+40, i ); oldsync = cyg_hal_smp_cpu_sync_flag[i]; cyg_hal_smp_cpu_sync[i] = 0; icrhi = i<<24; icrlo = CYGNUM_HAL_VECTOR_NMI; // not really used icrlo |= 0x00000400; // Delivery = NMI //icrlo |= 0x000C0000; // Dest = all excluding self // Write the ICR register. The interrupt will be raised when // the low word is written. HAL_APIC_WRITE( HAL_APIC_ICR_HI, icrhi ); HAL_APIC_WRITE( HAL_APIC_ICR_LO, icrlo ); // Wait for the ICR to become inactive do { #if 0 //SCREEN_DIAGNOSTICS static int n; PC_WRITE_SCREEN_8( PC_SCREEN_LINE(6+me)+45, n ); n++; #endif HAL_APIC_READ( HAL_APIC_ICR_LO, icrlo ); } while( (icrlo & 0x00001000) != 0 ); // Wait for CPU to halt while( cyg_hal_smp_cpu_sync_flag[i] == oldsync ) { #if 0 //SCREEN_DIAGNOSTICS PC_WRITE_SCREEN_8( PC_SCREEN_LINE(6+me)+4, x ); x++; PC_WRITE_SCREEN_8( PC_SCREEN_LINE(6+me)+10+(i*8), cyg_hal_smp_cpu_sync_flag[i] ); PC_WRITE_SCREEN_8( PC_SCREEN_LINE(6+me)+10+(i*8)+4, oldsync ); #endif hal_delay_us( 100 ); } } } } __externC void cyg_hal_smp_release_other_cpus(void) { int i; for( i = 0 ; i < HAL_SMP_CPU_COUNT(); i++ ) { if( i != HAL_SMP_CPU_THIS() && cyg_hal_smp_cpu_running[i] ) { CYG_WORD32 oldsync = cyg_hal_smp_cpu_sync_flag[i]; cyg_hal_smp_cpu_sync[i] = 1; while( cyg_hal_smp_cpu_sync_flag[i] == oldsync ) continue; cyg_hal_smp_cpu_sync[i] = 0; } } } #endif // CYGPKG_HAL_SMP_SUPPORT /*------------------------------------------------------------------------*/ /* End of pcmb_smp.c */
Go to most recent revision | Compare with Previous | Blame | View Log