OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mips/] [arch/] [v2_0/] [include/] [arch.inc] - Rev 174

Compare with Previous | Blame | View Log

#ifndef CYGONCE_HAL_ARCH_INC
#define CYGONCE_HAL_ARCH_INC
##=============================================================================
##
##      arch.inc
##
##      MIPS assembler header file
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   nickg
## Contributors:        nickg, dmoseley
## Date:        1997-10-16
## Purpose:     Architecture definitions.
## Description: This file contains various definitions and macros that are
##              useful for writing assembly code for the MIPS CPU family.
## Usage:
##              #include <cyg/hal/arch.inc>
##              ...
##              
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <cyg/hal/mips.inc>
        
#include <cyg/hal/variant.inc>

##----------------------------------------------------------------------------- 
## Set up the value for the initial status register


# Either the variant or platform may define an INITIAL_SR of its
#own. If not then provide a default value here.

#ifndef INITIAL_SR

# Both the variant and platform HALs have the option to add some bits
# to the default status register. If they do not choose to do so,
# supply default zeroes here.

# ifndef INITIAL_SR_VAR
#  define INITIAL_SR_VAR 0x00000000
# endif
# ifndef INITIAL_SR_PLF
#  define INITIAL_SR_PLF 0x00000000
# endif

#if defined(CYG_HAL_STARTUP_RAM) || defined(CYG_HAL_STARTUP_ROMRAM)
# if defined(CYGPKG_HAL_MIPS_SIM) || !defined(CYGSEM_HAL_USE_ROM_MONITOR)
#  define INITIAL_SR_ARCH       0x1000ff00 /* CP0 usable, Ints enabled, master interrupt disable */
# else
#  define INITIAL_SR_ARCH       0x1040ff00      /* as above + ROM vectors used  */
# endif 
#elif defined(CYG_HAL_STARTUP_ROM)
# define INITIAL_SR_ARCH        0x1040ff00      /* as above + ROM vectors used  */
#endif

#define INITIAL_SR      (INITIAL_SR_ARCH|INITIAL_SR_VAR|INITIAL_SR_PLF)

#endif

##-----------------------------------------------------------------------------
## Setup the initial value for the config0 register

#ifndef INITIAL_CONFIG0

#define INITIAL_CONFIG0 0x00000002

#endif

##-----------------------------------------------------------------------------
## MIPS thread and interrupt saved state. This must match the layout of the
## HAL_SavedRegisters in hal_arch.h. Do not change this without changing the
## layout there, or viceversa.  

# Size of registers that change size between 32 and 64 bit implementations
#ifdef CYGHWR_HAL_MIPS_64BIT
# define mips_regsize   8
#else
# define mips_regsize   4
#endif

# Size of registers that stay the same size in all implementations
# define mips_regsize32 4

# Size of FPU registers.
#if defined(CYGHWR_HAL_MIPS_FPU)
# if defined(CYGHWR_HAL_MIPS_FPU_64BIT)
#  define mips_fpuregsize 8
# elif defined(CYGHWR_HAL_MIPS_FPU_32BIT)
#  define mips_fpuregsize 4
# else
#  error MIPS FPU register size not defined
# endif
#endif


#define mipsreg_regs    0
#define mipsreg_hi      (mips_regsize*32)
#define mipsreg_lo      (mipsreg_hi+mips_regsize)
#ifdef CYGHWR_HAL_MIPS_FPU
# define mipsreg_fpureg (mipsreg_lo+mips_regsize)
# define mipsreg_fcr31  (mipsreg_fpureg+(mips_fpuregsize*32))
# define mipsreg_fppad  (mipsreg_fcr31+mips_regsize32)
# define mipsreg_vector (mipsreg_fppad+mips_regsize32)
#else
# define mipsreg_vector (mipsreg_lo+mips_regsize)
#endif
#define mipsreg_sr      (mipsreg_vector+mips_regsize32)
#define mipsreg_pc      (mipsreg_sr+mips_regsize32)
#define mipsreg_cachectrl (mipsreg_pc+mips_regsize)
#define mipsreg_cause   (mipsreg_cachectrl+mips_regsize32)
#define mipsreg_badvr   (mipsreg_cause+mips_regsize32)
#define mipsreg_prid    (mipsreg_badvr+mips_regsize)
#define mipsreg_config  (mipsreg_prid+mips_regsize32)
#define mipsreg_size    (mipsreg_config+mips_regsize32)

# The following expression ensures that the decrement is always a
# multiple of 16 bytes. This is a requirement of the MEABI used in
# MIPS32/64 targets.

#define mips_exception_decrement        ((mipsreg_size*2)&~0xF)

##-----------------------------------------------------------------------------
## Minimal stack frame size uses to call functions from asm.
        
#define mips_stack_frame_size           32      // 4 (64 bit) args worth

##-----------------------------------------------------------------------------
## Load Address and Relocate. This macro is used in code that may be linked
## to execute out of RAM but is actually executed from ROM. If that is the
## case a suitable version of this macro will have been defined elsewhere.
## This is just a default version for use when that does not happen.

#ifndef CYGPKG_HAL_MIPS_LAR_DEFINED

        .macro  lar     reg,addr
        la      \reg,\addr
        .endm

#define CYGPKG_HAL_MIPS_LAR_DEFINED

#endif

##-----------------------------------------------------------------------------
## CPU specific macros. These provide a common assembler interface to
## operations that may have CPU specific implementations on different
## variants of the architecture.                
        
        # Initialize CPU
        .macro  hal_cpu_init

#if defined(CYGPKG_HAL_MIPS_MIPS32) || defined(CYGPKG_HAL_MIPS_MIPS64)
        # Initialize/clear watchpoint registers
        mvatc0  zero, C0_WATCHLO
        nop
        nop
        nop
        mtc0    zero, C0_WATCHHI 
        nop
        nop
        nop
#endif /* CYGPKG_HAL_MIPS_MIPS32 || CYGPKG_HAL_MIPS_MIPS64 */
        mtc0    zero,cause              # zero cause reg
        nop
#if !defined(CYGSEM_HAL_USE_ROM_MONITOR)
        la      v0,INITIAL_SR           # initialize status register
        mtc0    v0,status
        nop
        nop
        nop
        la      v0,INITIAL_CONFIG0
        mtc0    v0,config0
        nop
        nop
        nop
#endif
        .endm

        # Enable interrupts
#ifdef CYG_HAL_MIPS_R3900       
        .macro hal_cpu_int_enable
        mfc0    v0,status
        nop
        nop
        ori     v0,v0,0x0001            # set IE bit
        mtc0    v0,status
        nop
        nop
        nop
        .endm           
#else
        .macro hal_cpu_int_enable       
        mfc0    v0,status
        la      v1,0xFFFFFFF9
        and     v0,v0,v1                # clear EXL and ERL bits        
        ori     v0,v0,0x0001            # set IE bit
        mtc0    v0,status
        nop
        nop
        nop     
        .endm   
#endif          


        # Disable interrupts
        .macro hal_cpu_int_disable
        mfc0    v0,status
        la      v1,0xFFFFFFFE
        and     v0,v0,v1
        mtc0    v0,status
        nop
        nop
        nop
        .endm   

        # Merge the interrupt enable state of the status register in
        # \sr with the current sr.
#ifdef CYG_HAL_MIPS_R3900
#define HAL_SR_INT_MASK 0x00000001              // IEc only
#else
#define HAL_SR_INT_MASK 0x00000007              // IE, EXL, ERL
#endif                  
        .macro  hal_cpu_int_merge sr
        mfc0    v0,status                       # V0 = current SR
        la      v1,HAL_SR_INT_MASK              # V1 = SR interrupt bits mask
        and     \sr,\sr,v1                      # Isolate interrupt bits of \sr
        nor     v1,v1,zero                      # Invert mask
        and     v0,v0,v1                        # V0 = current SR except int bits
        or      v0,v0,\sr                       # V0 = New SR
        mtc0    v0,status                       # Return to SR
        .endm

        # Enable further exception processing, and disable
        # interrupt processing.
#ifdef CYG_HAL_MIPS_R3900       
        .macro hal_cpu_except_enable
        hal_cpu_int_disable
        .endm           
#else
        .macro hal_cpu_except_enable
        mfc0    v0,status
        la      v1,0xFFFFFFF0
        and     v0,v0,v1                # clear EXL, ERL and IE bits    
        mtc0    v0,status
        nop
        nop
        nop
        .endm
#endif          
        
        # Return from exception.
#ifdef CYG_HAL_MIPS_R3900
        .macro  hal_cpu_eret pc,sr
        mtc0    \sr,status                      # Load status register
        nop
        nop
        nop
        sync                                    # settle things down
        jr      \pc                             # jump back to interrupted code
        rfe                                     # restore state (delay slot)    
        .endm
#else
        .macro  hal_cpu_eret pc,sr
        .set mips3
        ori     \sr,\sr,2                       # prevent interrupts until eret
        mtc0    \sr,status                      # put SR back
        nop
        nop
        nop
        mvatc0  \pc,epc                         # put PC in EPC
        nop
        nop
        nop
        sync                                    # settle things down
        eret                                    # return
        nop                                     # just to be safe
        .set mips0
        .endm
#endif  
        
##-----------------------------------------------------------------------------
# Default MIPS interrupt decoding macros. This uses the basic interrupt
# support provided by CP0 in the cause and status registers. If there is
# a more complex external interrupt controller, or the default stuff is
# interpreted differently (as in the TX3904) then these macros will be 
# overridden and CYGPKG_HAL_MIPS_INTC_DEFINED will be defined.

#ifndef CYGPKG_HAL_MIPS_INTC_DEFINED

#ifndef CYGPKG_HAL_MIPS_INTC_INIT_DEFINED
        # initialize all interrupts to disabled
        .macro  hal_intc_init
        mfc0    v0,status
        nop
        lui     v1,0xFFFF
        ori     v1,v1,0x00FF
        and     v0,v0,v1                # clear the IntMask bits
        mtc0    v0,status
        nop
        nop
        nop
        .endm
#endif

#ifndef CYGPKG_HAL_MIPS_INTC_DECODE_DEFINED
        .macro  hal_intc_decode vnum
        mfc0    v1,status               # get status register (interrupt mask)
        nop                             # delay slot
        mfc0    v0,cause                # get cause register
        nop                             # delay slot
        and     v0,v0,v1                # apply interrupt mask
        srl     v0,v0,10                # shift interrupt bits down
        andi    v0,v0,0x7f              # isolate 6 interrupt bits
        la      v1,hal_intc_translation_table
        add     v0,v0,v1                # index into table
        lb      \vnum,0(v0)             # pick up vector number
        .endm
#endif

#ifndef CYGPKG_HAL_MIPS_INTC_TRANSLATE_DEFINED
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        .macro  hal_intc_translate inum,vnum
        move    \vnum,zero                      # Just vector zero is supported
        .endm
#else                   
        .macro  hal_intc_translate inum,vnum
        move    \vnum,\inum                     # Vector == interrupt number
        .endm
#endif
#endif

        .macro  hal_intc_decode_data
hal_intc_translation_table:     
        .byte   0, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   3, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   4, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   3, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   5, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   3, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   4, 0, 1, 0
        .byte   2, 0, 1, 0
        .byte   3, 0, 1, 0
        .byte   2, 0, 1, 0
        .endm
#endif

#------------------------------------------------------------------------------
# Register save and restore macros. These expect a pointer to a CPU save state
# area in the register \ptr. The GPR indicated by \reg will be saved into its
# slot in that structure.

#ifdef CYGHWR_HAL_MIPS_64BIT

        .macro sgpr reg,ptr
        sd      $\reg,(mipsreg_regs+\reg*mips_regsize)(\ptr)
        .endm

        .macro lgpr reg,ptr
        ld      $\reg,(mipsreg_regs+\reg*mips_regsize)(\ptr)
        .endm

        .macro slo reg,ptr
        sd      \reg,(mipsreg_lo)(\ptr)
        .endm

        .macro shi reg,ptr
        sd      \reg,(mipsreg_hi)(\ptr)
        .endm

        .macro llo reg,ptr
        ld      \reg,(mipsreg_lo)(\ptr)
        .endm

        .macro lhi reg,ptr
        ld      \reg,(mipsreg_hi)(\ptr)
        .endm

        .macro ssp reg,ptr
        sd      \reg,(mipsreg_regs+29*mips_regsize)(\ptr)
        .endm

        .macro lsp reg,ptr
        ld      \reg,(mipsreg_regs+29*mips_regsize)(\ptr)
        .endm

        .macro sva reg,val
        sd      \reg,\val
        .endm

        .macro lva reg,val
        ld      \reg,\val
        .endm

        .macro mvafc0 gpr,cpr
        dmfc0   \gpr,\cpr
        .endm

        .macro mvatc0 gpr,cpr
        dmtc0   \gpr,\cpr
        .endm

        .macro lpc reg,ptr
        ld      \reg,(mipsreg_pc)(\ptr)
        .endm

        .macro spc reg,ptr
        sd      \reg,(mipsreg_pc)(\ptr)
        .endm

#else

        .macro sgpr reg,ptr
        sw      $\reg,(mipsreg_regs+\reg*mips_regsize)(\ptr)
        .endm

        .macro lgpr reg,ptr
        lw      $\reg,(mipsreg_regs+\reg*mips_regsize)(\ptr)
        .endm

        .macro slo reg,ptr
        sw      \reg,(mipsreg_lo)(\ptr)
        .endm

        .macro shi reg,ptr
        sw      \reg,(mipsreg_hi)(\ptr)
        .endm

        .macro llo reg,ptr
        lw      \reg,(mipsreg_lo)(\ptr)
        .endm

        .macro lhi reg,ptr
        lw      \reg,(mipsreg_hi)(\ptr)
        .endm

        .macro ssp reg,ptr
        sw      \reg,(mipsreg_regs+29*mips_regsize)(\ptr)
        .endm

        .macro lsp reg,ptr
        lw      \reg,(mipsreg_regs+29*mips_regsize)(\ptr)
        .endm

        .macro sva reg,val
        sw      \reg,\val
        .endm

        .macro lva reg,val
        lw      \reg,\val
        .endm

        .macro mvafc0 gpr,cpr
        mfc0    \gpr,\cpr
        .endm

        .macro mvatc0 gpr,cpr
        mtc0    \gpr,\cpr
        .endm

        .macro lpc reg,ptr
        lw      \reg,(mipsreg_pc)(\ptr)
        .endm

        .macro spc reg,ptr
        sw      \reg,(mipsreg_pc)(\ptr)
        .endm
#endif

#------------------------------------------------------------------------------
# FPU macros.
# The MIPS floating point unit essentially operates in two modes. In the first
# it supplies 32 32bit FP registers that may be paired into 16 64 bit registers.
# In the second it supplies 32 64bit registers. Which mode is to be used depends
# not only on the specific implementation in use, but also on the setting of the
# FR bit in the status register (if it is implemented) and on the expectations of
# the toolchain.                        
        
#ifndef CYGPKG_HAL_MIPS_FPU_DEFINED

#ifdef CYGHWR_HAL_MIPS_FPU

#if defined(CYGHWR_HAL_MIPS_FPU_64BIT)
#define sfpr    sdc1
#define lfpr    ldc1
#define CYG_HAL_MIPS_FPU_SR_INIT        0x24000000      
#elif defined(CYGHWR_HAL_MIPS_FPU_32BIT)
#define sfpr    swc1
#define lfpr    lwc1
#define CYG_HAL_MIPS_FPU_SR_INIT        0x20000000              
#else
#error MIPS FPU register size not defined
#endif          

#ifndef CYG_HAL_MIPS_FCSR_INIT
#define CYG_HAL_MIPS_FCSR_INIT 0
#endif

        .macro  hal_fpu_init
        mfc0    v0,status                       # Get sr
        la      v1,0xDBFFFFFF                   # Clear bits to be changed
        and     v0,v0,v1
        la      v1,CYG_HAL_MIPS_FPU_SR_INIT     # Set the bits we want
        or      v0,v0,v1                        # Set sr to required value
        mtc0    v0,status                       # return to sr
        nop
        nop
        nop
        la      v0,CYG_HAL_MIPS_FCSR_INIT       # Get initial value for FCR31
        ctc1    v0,$31                          # set Fp control reg
        nop
        .endm

        # Save the caller-saved registers as defined by the ABI.
        # These only really need saving during interrupts.
        .macro  hal_fpu_save_caller regs
        cfc1    v0,$31
        sw      v0,mipsreg_fcr31(\regs)
        sfpr    f0,(mipsreg_fpureg+0*mips_fpuregsize)(\regs)
        sfpr    f1,(mipsreg_fpureg+1*mips_fpuregsize)(\regs)
        sfpr    f2,(mipsreg_fpureg+2*mips_fpuregsize)(\regs)
        sfpr    f3,(mipsreg_fpureg+3*mips_fpuregsize)(\regs)
        sfpr    f4,(mipsreg_fpureg+4*mips_fpuregsize)(\regs)
        sfpr    f5,(mipsreg_fpureg+5*mips_fpuregsize)(\regs)
        sfpr    f6,(mipsreg_fpureg+6*mips_fpuregsize)(\regs)
        sfpr    f7,(mipsreg_fpureg+7*mips_fpuregsize)(\regs)
        sfpr    f8,(mipsreg_fpureg+8*mips_fpuregsize)(\regs)
        sfpr    f9,(mipsreg_fpureg+9*mips_fpuregsize)(\regs)
        sfpr    f10,(mipsreg_fpureg+10*mips_fpuregsize)(\regs)
        sfpr    f11,(mipsreg_fpureg+11*mips_fpuregsize)(\regs)
        sfpr    f12,(mipsreg_fpureg+12*mips_fpuregsize)(\regs)
        sfpr    f13,(mipsreg_fpureg+13*mips_fpuregsize)(\regs)
        sfpr    f14,(mipsreg_fpureg+14*mips_fpuregsize)(\regs)
        sfpr    f15,(mipsreg_fpureg+15*mips_fpuregsize)(\regs)
        sfpr    f16,(mipsreg_fpureg+16*mips_fpuregsize)(\regs)
        sfpr    f17,(mipsreg_fpureg+17*mips_fpuregsize)(\regs)
        sfpr    f18,(mipsreg_fpureg+18*mips_fpuregsize)(\regs)
        sfpr    f19,(mipsreg_fpureg+19*mips_fpuregsize)(\regs)
        sfpr    f31,(mipsreg_fpureg+31*mips_fpuregsize)(\regs)
        .endm

        # Save the callee-saved registers as defined by the ABI.
        # These are the only registers that need to be saved
        # across thread switches.
        .macro  hal_fpu_save_callee regs
        sfpr    f20,(mipsreg_fpureg+20*mips_fpuregsize)(\regs)
        sfpr    f21,(mipsreg_fpureg+21*mips_fpuregsize)(\regs)
        sfpr    f22,(mipsreg_fpureg+22*mips_fpuregsize)(\regs)
        sfpr    f23,(mipsreg_fpureg+23*mips_fpuregsize)(\regs)
        sfpr    f24,(mipsreg_fpureg+24*mips_fpuregsize)(\regs)
        sfpr    f25,(mipsreg_fpureg+25*mips_fpuregsize)(\regs)
        sfpr    f26,(mipsreg_fpureg+26*mips_fpuregsize)(\regs)
        sfpr    f27,(mipsreg_fpureg+27*mips_fpuregsize)(\regs)
        sfpr    f28,(mipsreg_fpureg+28*mips_fpuregsize)(\regs)
        sfpr    f29,(mipsreg_fpureg+29*mips_fpuregsize)(\regs)
        sfpr    f30,(mipsreg_fpureg+30*mips_fpuregsize)(\regs)
        .endm

        # General macro to save everything
        .macro  hal_fpu_save regs
        hal_fpu_save_caller \regs
        hal_fpu_save_callee \regs
        .endm

        # Reload the caller-saved registers.
        .macro  hal_fpu_load_caller regs
        lfpr    f0,(mipsreg_fpureg+0*mips_fpuregsize)(\regs)
        lfpr    f1,(mipsreg_fpureg+1*mips_fpuregsize)(\regs)
        lfpr    f2,(mipsreg_fpureg+2*mips_fpuregsize)(\regs)
        lfpr    f3,(mipsreg_fpureg+3*mips_fpuregsize)(\regs)
        lfpr    f4,(mipsreg_fpureg+4*mips_fpuregsize)(\regs)
        lfpr    f5,(mipsreg_fpureg+5*mips_fpuregsize)(\regs)
        lfpr    f6,(mipsreg_fpureg+6*mips_fpuregsize)(\regs)
        lfpr    f7,(mipsreg_fpureg+7*mips_fpuregsize)(\regs)
        lfpr    f8,(mipsreg_fpureg+8*mips_fpuregsize)(\regs)
        lfpr    f9,(mipsreg_fpureg+9*mips_fpuregsize)(\regs)
        lfpr    f10,(mipsreg_fpureg+10*mips_fpuregsize)(\regs)
        lfpr    f11,(mipsreg_fpureg+11*mips_fpuregsize)(\regs)
        lfpr    f12,(mipsreg_fpureg+12*mips_fpuregsize)(\regs)
        lfpr    f13,(mipsreg_fpureg+13*mips_fpuregsize)(\regs)
        lfpr    f14,(mipsreg_fpureg+14*mips_fpuregsize)(\regs)
        lfpr    f15,(mipsreg_fpureg+15*mips_fpuregsize)(\regs)
        lfpr    f16,(mipsreg_fpureg+16*mips_fpuregsize)(\regs)
        lfpr    f17,(mipsreg_fpureg+17*mips_fpuregsize)(\regs)
        lfpr    f18,(mipsreg_fpureg+18*mips_fpuregsize)(\regs)
        lfpr    f19,(mipsreg_fpureg+19*mips_fpuregsize)(\regs)
        lfpr    f31,(mipsreg_fpureg+31*mips_fpuregsize)(\regs)
        lw      v0,mipsreg_fcr31(\regs)
        ctc1    v0,$31
        .endm

        # Reload the callee-saved registers.
        .macro  hal_fpu_load_callee regs
        lfpr    f20,(mipsreg_fpureg+20*mips_fpuregsize)(\regs)
        lfpr    f21,(mipsreg_fpureg+21*mips_fpuregsize)(\regs)
        lfpr    f22,(mipsreg_fpureg+22*mips_fpuregsize)(\regs)
        lfpr    f23,(mipsreg_fpureg+23*mips_fpuregsize)(\regs)
        lfpr    f24,(mipsreg_fpureg+24*mips_fpuregsize)(\regs)
        lfpr    f25,(mipsreg_fpureg+25*mips_fpuregsize)(\regs)
        lfpr    f26,(mipsreg_fpureg+26*mips_fpuregsize)(\regs)
        lfpr    f27,(mipsreg_fpureg+27*mips_fpuregsize)(\regs)
        lfpr    f28,(mipsreg_fpureg+28*mips_fpuregsize)(\regs)
        lfpr    f29,(mipsreg_fpureg+29*mips_fpuregsize)(\regs)
        lfpr    f30,(mipsreg_fpureg+30*mips_fpuregsize)(\regs)
        .endm

        # Reload everything.
        .macro  hal_fpu_load regs
        hal_fpu_load_caller \regs
        hal_fpu_load_callee \regs
        .endm
#else   

        # Default macros for non-fpu implementations
        
        .macro  hal_fpu_init
        .endm
                
        .macro  hal_fpu_save regs
        .endm

        .macro  hal_fpu_save_caller regs
        .endm

        .macro  hal_fpu_save_callee regs
        .endm

        .macro  hal_fpu_load_caller regs
        .endm
        
        .macro  hal_fpu_load_callee regs
        .endm
        
        .macro  hal_fpu_load regs
        .endm
        
#endif
                        
#endif  

#------------------------------------------------------------------------------
# MMU macros.
        
#ifndef CYGPKG_HAL_MIPS_MMU_DEFINED

        .macro  hal_mmu_init
        .endm

#endif  

#------------------------------------------------------------------------------
# MEMC macros.
        
#ifndef CYGPKG_HAL_MIPS_MEMC_DEFINED

        .macro  hal_memc_init
        .endm

#endif  
        
#------------------------------------------------------------------------------
# Cache macros.
        
#ifndef CYGPKG_HAL_MIPS_CACHE_DEFINED

#ifdef CYG_HAL_MIPS_R3900
        .macro  hal_cache_init
        mfc0    v0,config               # disable cache in config register
        nop
        nop
        la      v1,0xffffffcf
        and     v0,v0,v1
        mtc0    v0,config
        nop
        nop
        nop
        .endm
#else
        .macro  hal_cache_init

        mfc0    v0,config0              # disable Kseg0 caching in config0 register
        nop
        nop
        la      v1,0xfffffff8
        and     v0,v0,v1
        ori     v0,v0,2
        mtc0    v0,config0
        nop
        nop
        nop

        .endm
#endif

#endif  

#------------------------------------------------------------------------------
# Diagnostics macros.
        
#ifndef CYGPKG_HAL_MIPS_DIAG_DEFINED

        .macro  hal_diag_init
        .endm

        .macro  hal_diag_excpt_start
        .endm

        .macro  hal_diag_intr_start
        .endm

        .macro  hal_diag_restore
        .endm
#endif  

#------------------------------------------------------------------------------
# Timer initialization.
        
#ifndef CYGPKG_HAL_MIPS_TIMER_DEFINED

        .macro  hal_timer_init
        .endm

#endif  

#------------------------------------------------------------------------------
# Monitor initialization.
        
#ifndef CYGPKG_HAL_MIPS_MON_DEFINED

        .macro  hal_mon_init
        .endm

#endif  

#------------------------------------------------------------------------------
#endif // ifndef CYGONCE_HAL_ARCH_INC
# end of arch.inc

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.