URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mips/] [arch/] [v2_0/] [include/] [hal_arch.h] - Rev 587
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef CYGONCE_HAL_HAL_ARCH_H #define CYGONCE_HAL_HAL_ARCH_H //========================================================================== // // hal_arch.h // // Architecture specific abstractions // //========================================================================== //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): nickg // Contributors: nickg, dmoseley // Date: 1999-02-17 // Purpose: Define architecture abstractions // Usage: #include <cyg/hal/hal_arch.h> // //####DESCRIPTIONEND#### // //========================================================================== #ifndef __ASSEMBLER__ #include <pkgconf/hal.h> #include <cyg/infra/cyg_type.h> #include <cyg/hal/var_arch.h> //-------------------------------------------------------------------------- // Processor saved states: // The layout of this structure is also defined in "arch.inc", for assembly // code. Do not change this without changing that (or vice versa). // Notes: This structure is carefully laid out. It is a multiple of 8 // bytes and the pc and badvr fields are positioned to ensure that // they are on 8 byte boundaries. #ifdef CYGHWR_HAL_MIPS_64BIT # define CYG_HAL_MIPS_REG CYG_WORD64 # define CYG_HAL_MIPS_REG_SIZE 8 #else # define CYG_HAL_MIPS_REG CYG_WORD32 # define CYG_HAL_MIPS_REG_SIZE 4 #endif #if defined(CYGHWR_HAL_MIPS_FPU) # if defined(CYGHWR_HAL_MIPS_FPU_64BIT) # define CYG_HAL_FPU_REG CYG_WORD64 # elif defined(CYGHWR_HAL_MIPS_FPU_32BIT) # define CYG_HAL_FPU_REG CYG_WORD32 # else # error MIPS FPU register size not defined # endif #endif typedef struct { // These are common to all saved states CYG_HAL_MIPS_REG d[32]; /* Data regs */ CYG_HAL_MIPS_REG hi; /* hi word of mpy/div reg */ CYG_HAL_MIPS_REG lo; /* lo word of mpy/div reg */ #ifdef CYGHWR_HAL_MIPS_FPU CYG_HAL_FPU_REG f[32]; /* FPU registers */ CYG_WORD32 fcr31; /* FPU control/status register */ CYG_WORD32 fppad; /* Dummy location to make this */ /* structure a multiple of 8 */ /* bytes long. */ #endif // These are only saved for exceptions and interrupts CYG_WORD32 vector; /* Vector number */ CYG_WORD32 sr; /* Status Reg */ CYG_HAL_MIPS_REG pc; /* Program Counter */ CYG_WORD32 cache; /* Cache control register */ // These are only saved for exceptions, and are not restored // when continued. CYG_WORD32 cause; /* Exception cause register */ CYG_HAL_MIPS_REG badvr; /* Bad virtual address reg */ CYG_WORD32 prid; /* Processor Version */ CYG_WORD32 config; /* Config register */ } HAL_SavedRegisters; //-------------------------------------------------------------------------- // Exception handling function. // This function is defined by the kernel according to this prototype. It is // invoked from the HAL to deal with any CPU exceptions that the HAL does // not want to deal with itself. It usually invokes the kernel's exception // delivery mechanism. externC void cyg_hal_deliver_exception( CYG_WORD code, CYG_ADDRWORD data ); //-------------------------------------------------------------------------- // Bit manipulation macros externC cyg_uint32 hal_lsbit_index(cyg_uint32 mask); externC cyg_uint32 hal_msbit_index(cyg_uint32 mask); #define HAL_LSBIT_INDEX(index, mask) index = hal_lsbit_index(mask); #define HAL_MSBIT_INDEX(index, mask) index = hal_msbit_index(mask); //-------------------------------------------------------------------------- // Context Initialization // Optional FPU context initialization #ifdef CYGHWR_HAL_MIPS_FPU #define HAL_THREAD_INIT_FPU_CONTEXT( _regs_, _id_ ) \ { \ for( _i_ = 0; _i_ < 32; _i_++ ) (_regs_)->f[_i_] = (_id_)|0xFF00|_i_; \ (_regs_)->fcr31 = 0x01000000; \ } #else #define HAL_THREAD_INIT_FPU_CONTEXT( _regs_, _id_ ) #endif // Initialize the context of a thread. // Arguments: // _sparg_ name of variable containing current sp, will be written with new sp // _thread_ thread object address, passed as argument to entry point // _entry_ entry point address. // _id_ bit pattern used in initializing registers, for debugging. #define HAL_THREAD_INIT_CONTEXT( _sparg_, _thread_, _entry_, _id_ ) \ { \ register CYG_WORD _sp_ = ((CYG_WORD)_sparg_)-56; \ register HAL_SavedRegisters *_regs_; \ int _i_; \ _sp_ = _sp_ & 0xFFFFFFF0; \ _regs_ = (HAL_SavedRegisters *)(((_sp_) - sizeof(HAL_SavedRegisters))&0xFFFFFFF0); \ for( _i_ = 0; _i_ < 32; _i_++ ) (_regs_)->d[_i_] = (_id_)|_i_; \ HAL_THREAD_INIT_FPU_CONTEXT( _regs_, _id_ ); \ (_regs_)->d[29] = (CYG_HAL_MIPS_REG)(_sp_); /* SP = top of stack */ \ (_regs_)->d[04] = (CYG_HAL_MIPS_REG)(_thread_); /* R4 = arg1 = thread ptr */ \ (_regs_)->lo = 0; /* LO = 0 */ \ (_regs_)->hi = 0; /* HI = 0 */ \ (_regs_)->d[30] = (CYG_HAL_MIPS_REG)(_sp_); /* FP = top of stack */ \ (_regs_)->d[31] = (CYG_HAL_MIPS_REG)(_entry_); /* RA(d[31]) = entry point*/ \ (_regs_)->pc = (CYG_WORD)(_entry_); /* PC = entry point */ \ (_regs_)->sr = 0x00000001; /* SR = ls 3 bits only */ \ _sparg_ = (CYG_ADDRESS)_regs_; \ } //-------------------------------------------------------------------------- // Context switch macros. // The arguments are pointers to locations where the stack pointer // of the current thread is to be stored, and from where the sp of the // next thread is to be fetched. externC void hal_thread_switch_context( CYG_ADDRESS to, CYG_ADDRESS from ); externC void hal_thread_load_context( CYG_ADDRESS to ) __attribute__ ((noreturn)); #define HAL_THREAD_SWITCH_CONTEXT(_fspptr_,_tspptr_) \ hal_thread_switch_context( (CYG_ADDRESS)_tspptr_, \ (CYG_ADDRESS)_fspptr_); #define HAL_THREAD_LOAD_CONTEXT(_tspptr_) \ hal_thread_load_context( (CYG_ADDRESS)_tspptr_ ); //-------------------------------------------------------------------------- // Execution reorder barrier. // When optimizing the compiler can reorder code. In multithreaded systems // where the order of actions is vital, this can sometimes cause problems. // This macro may be inserted into places where reordering should not happen. // The "memory" keyword is potentially unnecessary, but it is harmless to // keep it. #define HAL_REORDER_BARRIER() asm volatile ( "" : : : "memory" ) //-------------------------------------------------------------------------- // Breakpoint support // HAL_BREAKPOINT() is a code sequence that will cause a breakpoint to // happen if executed. // HAL_BREAKINST is the value of the breakpoint instruction and // HAL_BREAKINST_SIZE is its size in bytes. // HAL_BREAKINST_TYPE is the type. #define HAL_BREAKPOINT(_label_) \ asm volatile (" .globl " #_label_ ";" \ #_label_":" \ " break 5" \ ); #define HAL_BREAKINST 0x0005000d #define HAL_BREAKINST_SIZE 4 #define HAL_BREAKINST_TYPE cyg_uint32 //-------------------------------------------------------------------------- // Thread register state manipulation for GDB support. // Default to a 32 bit register size for GDB register dumps. #ifndef CYG_HAL_GDB_REG #define CYG_HAL_GDB_REG CYG_WORD32 #endif // Translate a stack pointer as saved by the thread context macros above into // a pointer to a HAL_SavedRegisters structure. #define HAL_THREAD_GET_SAVED_REGISTERS( _sp_, _regs_ ) \ (_regs_) = (HAL_SavedRegisters *)(_sp_) // If the CPU has an FPU, we also need to move the FPU registers. #ifdef CYGHWR_HAL_MIPS_FPU #define HAL_GET_GDB_FPU_REGISTERS( _regval_ , _regs_ ) \ CYG_MACRO_START \ int _i_; \ for( _i_ = 0; _i_ < 32; _i_++ ) \ _regval_[38+_i_] = (_regs_)->f[_i_]; \ _regval_[70] = (_regs_)->fcr31; \ CYG_MACRO_END #define HAL_SET_GDB_FPU_REGISTERS( _regs_ , _regval_ ) \ CYG_MACRO_START \ int _i_; \ for( _i_ = 0; _i_ < 32; _i_++ ) \ (_regs_)->f[_i_] = _regval_[38+_i_]; \ (_regs_)->fcr31 = _regval_[70]; \ CYG_MACRO_END #else #define HAL_GET_GDB_FPU_REGISTERS( _regval_ , _regs_ ) #define HAL_SET_GDB_FPU_REGISTERS( _regs_ , _regval_ ) #endif // Some targets also report the state of all the coprocessor 0 // registers to GDB. If that is the case then // CYGPKG_HAL_MIPS_GDB_REPORT_CP0 will be defined and the // HAL_[G|S]ET_CP0_REGISTER_*() macros will be defined. #ifdef CYGPKG_HAL_MIPS_GDB_REPORT_CP0 #define HAL_GET_GDB_CP0_REGISTERS( _regval_, _regs_ ) \ HAL_GET_CP0_REGISTER_32( _regval_[74], 0, 0 ); /* index */ \ HAL_GET_CP0_REGISTER_32( _regval_[75], 1, 0 ); /* random */ \ HAL_GET_CP0_REGISTER_32( _regval_[76], 2, 0 ); /* EntryLo0 */ \ HAL_GET_CP0_REGISTER_32( _regval_[77], 3, 0 ); /* EntryLo1 */ \ HAL_GET_CP0_REGISTER_64( _regval_[78], 4, 0 ); /* context */ \ HAL_GET_CP0_REGISTER_32( _regval_[79], 5, 0 ); /* PageMask */ \ HAL_GET_CP0_REGISTER_32( _regval_[80], 6, 0 ); /* Wired */ \ (_regval_)[81] = 0xC0C0C006; \ (_regval_)[82] = (_regs_)->badvr; /* BadVr */ \ HAL_GET_CP0_REGISTER_32( _regval_[83], 9, 0 ); /* Count */ \ HAL_GET_CP0_REGISTER_64( _regval_[84], 10, 0 ); /* EntryHi */ \ HAL_GET_CP0_REGISTER_32( _regval_[85], 11, 0 ); /* Compare */ \ (_regval_)[86] = (_regs_)->sr; /* Status */ \ (_regval_)[87] = (_regs_)->cause; /* Cause */ \ HAL_GET_CP0_REGISTER_64( _regval_[88], 14, 0 ); /* EPC */ \ HAL_GET_CP0_REGISTER_32( _regval_[89], 15, 0 ); /* PRId */ \ HAL_GET_CP0_REGISTER_32( _regval_[90], 16, 0 ); /* Config */ \ HAL_GET_CP0_REGISTER_32( _regval_[91], 17, 0 ); /* LLAddr */ \ HAL_GET_CP0_REGISTER_64( _regval_[92], 18, 0 ); /* WatchLo */ \ HAL_GET_CP0_REGISTER_32( _regval_[93], 19, 0 ); /* WatchHi */ \ HAL_GET_CP0_REGISTER_64( _regval_[94], 20, 0 ); /* XContext */ \ (_regval_)[95] = 0xC0C0C021; \ (_regval_)[96] = 0xC0C0C022; \ HAL_GET_CP0_REGISTER_32( _regval_[97], 23, 0 ); /* Debug */ \ HAL_GET_CP0_REGISTER_64( _regval_[98], 24, 0 ); /* DEPC */ \ (_regval_)[99] = 0xC0C0C025; \ HAL_GET_CP0_REGISTER_32( _regval_[100], 26, 0 ); /* ErrCtl */ \ HAL_GET_CP0_REGISTER_32( _regval_[101], 27, 0 ); /* CacheErr */ \ HAL_GET_CP0_REGISTER_32( _regval_[102], 28, 0 ); /* TagLo */ \ HAL_GET_CP0_REGISTER_32( _regval_[103], 29, 0 ); /* TagHi */ \ HAL_GET_CP0_REGISTER_64( _regval_[104], 30, 0 ); /* ErrorEPC */ \ HAL_GET_CP0_REGISTER_64( _regval_[105], 31, 0 ); /* DESAVE */ \ HAL_GET_CP0_REGISTER_32( _regval_[106], 16, 1 ); /* Config1 */ #define HAL_SET_GDB_CP0_REGISTERS( _regval_, _regs_ ) \ HAL_SET_CP0_REGISTER_32( _regval_[74], 0, 0 ); /* index */ \ HAL_SET_CP0_REGISTER_32( _regval_[76], 2, 0 ); /* EntryLo0 */ \ HAL_SET_CP0_REGISTER_32( _regval_[77], 3, 0 ); /* EntryLo1 */ \ HAL_SET_CP0_REGISTER_64( _regval_[78], 4, 0 ); /* context */ \ HAL_SET_CP0_REGISTER_32( _regval_[79], 5, 0 ); /* PageMask */ \ HAL_SET_CP0_REGISTER_32( _regval_[80], 6, 0 ); /* Wired */ \ HAL_SET_CP0_REGISTER_32( _regval_[83], 9, 0 ); /* Count */ \ HAL_SET_CP0_REGISTER_64( _regval_[84], 10, 0 ); /* EntryHi */ \ HAL_SET_CP0_REGISTER_32( _regval_[85], 11, 0 ); /* Compare */ \ HAL_SET_CP0_REGISTER_32( _regval_[90], 16, 0 ); /* Config */ \ HAL_SET_CP0_REGISTER_64( _regval_[92], 18, 0 ); /* WatchLo */ \ HAL_SET_CP0_REGISTER_32( _regval_[93], 19, 0 ); /* WatchHi */ \ HAL_SET_CP0_REGISTER_64( _regval_[94], 20, 0 ); /* XContext */ \ HAL_SET_CP0_REGISTER_32( _regval_[97], 23, 0 ); /* Debug */ \ HAL_SET_CP0_REGISTER_64( _regval_[98], 24, 0 ); /* DEPC */ \ HAL_SET_CP0_REGISTER_32( _regval_[100], 26, 0 ); /* ErrCtl */ \ HAL_SET_CP0_REGISTER_32( _regval_[101], 27, 0 ); /* CacheErr */ \ HAL_SET_CP0_REGISTER_32( _regval_[102], 28, 0 ); /* TagLo */ \ HAL_SET_CP0_REGISTER_32( _regval_[103], 29, 0 ); /* TagHi */ \ HAL_SET_CP0_REGISTER_64( _regval_[105], 31, 0 ); /* DESAVE */ #else #define HAL_GET_GDB_CP0_REGISTERS( _regval_, _regs_ ) #define HAL_SET_GDB_CP0_REGISTERS( _regval_, _regs_ ) #endif // Copy a set of registers from a HAL_SavedRegisters structure into a // GDB ordered array. #define HAL_GET_GDB_REGISTERS( _aregval_ , _regs_ ) \ { \ CYG_HAL_GDB_REG *_regval_ = (CYG_HAL_GDB_REG *)(_aregval_); \ int _i_; \ \ for( _i_ = 0; _i_ < 32; _i_++ ) \ _regval_[_i_] = (_regs_)->d[_i_]; \ \ HAL_GET_GDB_FPU_REGISTERS( _regval_, _regs_ ); \ \ _regval_[32] = (_regs_)->sr; \ _regval_[33] = (_regs_)->lo; \ _regval_[34] = (_regs_)->hi; \ _regval_[35] = (_regs_)->badvr; \ _regval_[36] = (_regs_)->cause; \ _regval_[37] = (_regs_)->pc; \ \ HAL_GET_GDB_CP0_REGISTERS( _regval_, _regs_ ); \ } // Copy a GDB ordered array into a HAL_SavedRegisters structure. #define HAL_SET_GDB_REGISTERS( _regs_ , _aregval_ ) \ { \ CYG_HAL_GDB_REG *_regval_ = (CYG_HAL_GDB_REG *)(_aregval_); \ int _i_; \ \ for( _i_ = 0; _i_ < 32; _i_++ ) \ (_regs_)->d[_i_] = _regval_[_i_]; \ \ HAL_SET_GDB_FPU_REGISTERS( _regs_, _regval_ ); \ \ (_regs_)->sr = _regval_[32]; \ (_regs_)->lo = _regval_[33]; \ (_regs_)->hi = _regval_[34]; \ (_regs_)->badvr = _regval_[35]; \ (_regs_)->cause = _regval_[36]; \ (_regs_)->pc = _regval_[37]; \ \ HAL_SET_GDB_CP0_REGISTERS( _regval_, _regs_ ); \ } //-------------------------------------------------------------------------- // HAL setjmp // Note: These definitions are repeated in hal_arch.h. If changes are // required remember to update both sets. #define CYGARC_JMP_BUF_SP 0 #define CYGARC_JMP_BUF_R16 1 #define CYGARC_JMP_BUF_R17 2 #define CYGARC_JMP_BUF_R18 3 #define CYGARC_JMP_BUF_R19 4 #define CYGARC_JMP_BUF_R20 5 #define CYGARC_JMP_BUF_R21 6 #define CYGARC_JMP_BUF_R22 7 #define CYGARC_JMP_BUF_R23 8 #define CYGARC_JMP_BUF_R28 9 #define CYGARC_JMP_BUF_R30 10 #define CYGARC_JMP_BUF_R31 11 #define CYGARC_JMP_BUF_SIZE 12 typedef cyg_uint32 hal_jmp_buf[CYGARC_JMP_BUF_SIZE]; externC int hal_setjmp(hal_jmp_buf env); externC void hal_longjmp(hal_jmp_buf env, int val); //------------------------------------------------------------------------- // Idle thread code. // This macro is called in the idle thread loop, and gives the HAL the // chance to insert code. Typical idle thread behaviour might be to halt the // processor. externC void hal_idle_thread_action(cyg_uint32 loop_count); #define HAL_IDLE_THREAD_ACTION(_count_) hal_idle_thread_action(_count_) //-------------------------------------------------------------------------- // Minimal and sensible stack sizes: the intention is that applications // will use these to provide a stack size in the first instance prior to // proper analysis. Idle thread stack should be this big. // THESE ARE NOT INTENDED TO BE MICROMETRICALLY ACCURATE FIGURES. // THEY ARE HOWEVER ENOUGH TO START PROGRAMMING. // YOU MUST MAKE YOUR STACKS LARGER IF YOU HAVE LARGE "AUTO" VARIABLES! // This is not a config option because it should not be adjusted except // under "enough rope" sort of disclaimers. // Typical case stack frame size: return link + 4 pushed registers + some locals. #define CYGNUM_HAL_STACK_FRAME_SIZE (48) // Stack needed for a context switch: #if defined(CYGHWR_HAL_MIPS_FPU) # if defined(CYGHWR_HAL_MIPS_FPU_64BIT) #define CYGNUM_HAL_STACK_CONTEXT_SIZE (((32+12)*CYG_HAL_MIPS_REG_SIZE)+(32*8)) # elif defined(CYGHWR_HAL_MIPS_FPU_32BIT) #define CYGNUM_HAL_STACK_CONTEXT_SIZE (((32+12)*CYG_HAL_MIPS_REG_SIZE)+(32*4)) # else # error MIPS FPU register size not defined # endif #else #define CYGNUM_HAL_STACK_CONTEXT_SIZE ((32+10)*CYG_HAL_MIPS_REG_SIZE) #endif // Interrupt + call to ISR, interrupt_end() and the DSR #define CYGNUM_HAL_STACK_INTERRUPT_SIZE (4+2*CYGNUM_HAL_STACK_CONTEXT_SIZE) #ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK // An interrupt stack which is large enough for all possible interrupt // conditions (and only used for that purpose) exists. "User" stacks // can be much smaller #define CYGNUM_HAL_STACK_SIZE_MINIMUM (CYGNUM_HAL_STACK_CONTEXT_SIZE+ \ CYGNUM_HAL_STACK_INTERRUPT_SIZE*2+ \ CYGNUM_HAL_STACK_FRAME_SIZE*8) #define CYGNUM_HAL_STACK_SIZE_TYPICAL (CYGNUM_HAL_STACK_SIZE_MINIMUM+1024) #else // CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK // No separate interrupt stack exists. Make sure all threads contain // a stack sufficiently large. #define CYGNUM_HAL_STACK_SIZE_MINIMUM (4096) #define CYGNUM_HAL_STACK_SIZE_TYPICAL (4096) #endif #endif /* __ASSEMBLER__ */ // Convenience macros for accessing memory cached or uncached #define CYGARC_KSEG_MASK (0xE0000000) #define CYGARC_KSEG_CACHED (0x80000000) #define CYGARC_KSEG_UNCACHED (0xA0000000) #define CYGARC_KSEG_CACHED_BASE (0x80000000) #define CYGARC_KSEG_UNCACHED_BASE (0xA0000000) #ifndef __ASSEMBLER__ #define CYGARC_CACHED_ADDRESS(x) ((((CYG_ADDRESS)(x)) & ~CYGARC_KSEG_MASK) | CYGARC_KSEG_CACHED) #define CYGARC_UNCACHED_ADDRESS(x) ((((CYG_ADDRESS)(x)) & ~CYGARC_KSEG_MASK) | CYGARC_KSEG_UNCACHED) #define CYGARC_PHYSICAL_ADDRESS(x) (((CYG_ADDRESS)(x)) & ~CYGARC_KSEG_MASK) #else // __ASSEMBLER__ #define CYGARC_CACHED_ADDRESS(x) ((((x)) & ~CYGARC_KSEG_MASK) | CYGARC_KSEG_CACHED) #define CYGARC_UNCACHED_ADDRESS(x) ((((x)) & ~CYGARC_KSEG_MASK) | CYGARC_KSEG_UNCACHED) #define CYGARC_PHYSICAL_ADDRESS(x) (((x)) & ~CYGARC_KSEG_MASK) #define CYGARC_ADDRESS_REG_CACHED(reg) \ and reg, reg, ~CYGARC_KSEG_MASK; \ or reg, reg, CYGARC_KSEG_CACHED #define CYGARC_ADDRESS_REG_UNCACHED(reg) \ and reg, reg, ~CYGARC_KSEG_MASK; \ or reg, reg, CYGARC_KSEG_UNCACHED #endif /* __ASSEMBLER__ */ //-------------------------------------------------------------------------- // Macros for switching context between two eCos instances (jump from // code in ROM to code in RAM or vice versa). #define CYGARC_HAL_SAVE_GP() \ CYG_MACRO_START \ register CYG_ADDRWORD __gp_save; \ asm volatile ( "move %0,$28;" \ ".extern _gp;" \ "la $gp,_gp;" \ : "=r"(__gp_save)) #define CYGARC_HAL_RESTORE_GP() \ asm volatile ( "move $gp,%0;" :: "r"(__gp_save) ); \ CYG_MACRO_END //-------------------------------------------------------------------------- // Macro for finding return address. #define CYGARC_HAL_GET_RETURN_ADDRESS(_x_, _dummy_) \ asm volatile ( "move %0,$31;" : "=r" (_x_) ) #define CYGARC_HAL_GET_RETURN_ADDRESS_BACKUP(_dummy_) //-------------------------------------------------------------------------- #endif // CYGONCE_HAL_HAL_ARCH_H // End of hal_arch.h
Go to most recent revision | Compare with Previous | Blame | View Log