Subversion Repositories openrisc_me

##=============================================================================##
##      context.S
##
##      MIPS context switch code
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   nickg
## Contributors:        nickg
## Date:        1998-04-27
## Purpose:     MIPS context switch code
## Description: This file contains implementations of the thread context 
##              switch routines. It also contains the longjmp() and setjmp()
##              routines.
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <pkgconf/hal.h>

#include <cyg/hal/arch.inc>

#ifdef at
#undef at
#endif

#------------------------------------------------------------------------------
# hal_thread_switch_context
# Switch thread contexts
# A0 = address of sp of next thread to execute
# A1 = address of sp save location of current thread

        .global hal_thread_switch_context
hal_thread_switch_context:              

        addi    sp,sp,-mipsreg_size     # space for registers

        # store GPRs
        .set    noat
#ifndef CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
        sgpr    0,sp
        sgpr    1,sp
        sgpr    2,sp
        sgpr    3,sp
        sgpr    4,sp
        sgpr    5,sp
        sgpr    6,sp
        sgpr    7,sp
        sgpr    8,sp
        sgpr    9,sp
        sgpr    10,sp
        sgpr    11,sp
        sgpr    12,sp
        sgpr    13,sp
        sgpr    14,sp
        sgpr    15,sp
        sgpr    24,sp
        sgpr    25,sp
        sgpr    28,sp   # == GP
#endif  
        sgpr    16,sp
        sgpr    17,sp   
        sgpr    18,sp
        sgpr    19,sp
        sgpr    20,sp
        sgpr    21,sp
        sgpr    22,sp
        sgpr    23,sp
#       sgpr    26,sp   # == K0
#       sgpr    27,sp   # == K1
#       sgpr    29,sp   # == SP
        sgpr    30,sp   # == FP
        sgpr    31,sp   # == RA
        spc     $31,sp  # == PC (to help with debugging)
        .set    at
        
#ifndef CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM

        mflo    t0                              # save LO and HI regs
        mfhi    t1
        slo     t0,sp
        shi     t1,sp
        
#endif

        hal_fpu_save_callee     sp

#ifndef CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM

        hal_fpu_save_caller     sp

#endif
        
        addi    t0,sp,mipsreg_size              # save SP in reg dump
        ssp     t0,sp

        mfc0    t1,status                       # Save status register
        sw      t1,mipsreg_sr(sp)
        
        sw      sp,0(a1)                        # save sp in save loc
        
        # Now load the destination thread by dropping through
        # to hal_thread_load_context
        
#------------------------------------------------------------------------------
# hal_thread_load_context
# Load thread context
# A0 = address of sp of next thread to execute
# Note that this function is also the second half of hal_thread_switch_context
# and is simply dropped into from it.
        
        .global hal_thread_load_context
hal_thread_load_context:

        lw      sp,0(a0)                        # load new SP directly

#ifndef CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM

        hal_fpu_load_caller sp  
        
#endif
                        
        hal_fpu_load_callee sp
        
#ifndef CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
        
        lw      t0,mipsreg_hi(sp)               # load HI and LO regs
        lw      t1,mipsreg_lo(sp)
        mthi    t0
        mtlo    t1

#endif

        # load GPRs
        .set    noat
#       lgpr    0,sp
        lgpr    4,sp    # A0, must load for thread startup
#ifndef CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
        lgpr    1,sp
        lgpr    2,sp
        lgpr    3,sp
        lgpr    5,sp
        lgpr    6,sp
        lgpr    7,sp
        lgpr    8,sp
        lgpr    9,sp
        lgpr    10,sp
        lgpr    11,sp
        lgpr    12,sp
        lgpr    13,sp
        lgpr    14,sp
        lgpr    15,sp
        lgpr    24,sp
        lgpr    25,sp
#endif  
        lgpr    16,sp
        lgpr    17,sp
        lgpr    18,sp
        lgpr    19,sp
        lgpr    20,sp
        lgpr    21,sp
        lgpr    22,sp
        lgpr    23,sp
#       lgpr    26,sp   # == K0
#       lgpr    27,sp   # == K1
#       lgpr    28,sp   # == GP
#       lgpr    29,sp   # == SP
        lgpr    30,sp   # == FP
        lgpr    31,sp   # == RA
        .set    at
        
        lw      a2,mipsreg_sr(sp)               # A2 = saved SR
        lsp     sp,sp                           # SP = saved SP

        hal_cpu_int_merge a2                    # Merge with current SR
        
        jr      ra                              # return via ra
        nop                                     # delay slot - must be nop

#------------------------------------------------------------------------------
# HAL longjmp, setjmp implementations
# hal_setjmp saves only to callee save registers 16-23, 28, 30, 31[ra], 29[sp]
# into buffer supplied in a0[arg0]
# Note: These definitions are repeated in hal_arch.h. If changes are required
# remember to update both sets.

#define CYGARC_JMP_BUF_SP        0
#define CYGARC_JMP_BUF_R16       1
#define CYGARC_JMP_BUF_R17       2
#define CYGARC_JMP_BUF_R18       3
#define CYGARC_JMP_BUF_R19       4
#define CYGARC_JMP_BUF_R20       5
#define CYGARC_JMP_BUF_R21       6
#define CYGARC_JMP_BUF_R22       7
#define CYGARC_JMP_BUF_R23       8
#define CYGARC_JMP_BUF_R28       9
#define CYGARC_JMP_BUF_R30      10
#define CYGARC_JMP_BUF_R31      11

#define CYGARC_JMP_BUF_SIZE     12

// FIXME: The follwing restricts us to using only 32 bit registers
// in jump buffers. If/when we move to a full 64 bit architecture,
// this will need to change, as will the instructions that we use to
// save and restore them.

#define jmpbuf_regsize 4
        
        .globl  hal_setjmp
        .ent    hal_setjmp
hal_setjmp:
        sw      $31,CYGARC_JMP_BUF_R31*jmpbuf_regsize(a0)       # ra (link)
        sw      $30,CYGARC_JMP_BUF_R30*jmpbuf_regsize(a0)
        sw      $28,CYGARC_JMP_BUF_R28*jmpbuf_regsize(a0)       # gp, optimize out?
        sw      $23,CYGARC_JMP_BUF_R23*jmpbuf_regsize(a0)
        sw      $22,CYGARC_JMP_BUF_R22*jmpbuf_regsize(a0)
        sw      $21,CYGARC_JMP_BUF_R21*jmpbuf_regsize(a0)
        sw      $20,CYGARC_JMP_BUF_R20*jmpbuf_regsize(a0)
        sw      $19,CYGARC_JMP_BUF_R19*jmpbuf_regsize(a0)
        sw      $18,CYGARC_JMP_BUF_R18*jmpbuf_regsize(a0)
        sw      $17,CYGARC_JMP_BUF_R17*jmpbuf_regsize(a0)
        sw      $16,CYGARC_JMP_BUF_R16*jmpbuf_regsize(a0)
        sw      sp,CYGARC_JMP_BUF_SP*jmpbuf_regsize(a0) # $29
        li      v0,0
        jr      ra
        nop                     # delay slot
        .end hal_setjmp

        .globl  hal_longjmp
        .ent    hal_longjmp
hal_longjmp:    
        lw      $31,CYGARC_JMP_BUF_R31*jmpbuf_regsize(a0)       # ra (link)
        lw      $30,CYGARC_JMP_BUF_R30*jmpbuf_regsize(a0)
        lw      $28,CYGARC_JMP_BUF_R28*jmpbuf_regsize(a0)       # gp, optimize out?
        lw      $23,CYGARC_JMP_BUF_R23*jmpbuf_regsize(a0)
        lw      $22,CYGARC_JMP_BUF_R22*jmpbuf_regsize(a0)
        lw      $21,CYGARC_JMP_BUF_R21*jmpbuf_regsize(a0)
        lw      $20,CYGARC_JMP_BUF_R20*jmpbuf_regsize(a0)
        lw      $19,CYGARC_JMP_BUF_R19*jmpbuf_regsize(a0)
        lw      $18,CYGARC_JMP_BUF_R18*jmpbuf_regsize(a0)
        lw      $17,CYGARC_JMP_BUF_R17*jmpbuf_regsize(a0)
        lw      $16,CYGARC_JMP_BUF_R16*jmpbuf_regsize(a0)
        lw      sp,CYGARC_JMP_BUF_SP*jmpbuf_regsize(a0) # $29
        move    v0,a1
        jr      ra
        nop                     # delay slot
        .end hal_longjmp
        
        
#------------------------------------------------------------------------------
# end of context.S