Subversion Repositories openrisc

##=============================================================================
##
##      vectors.S
##
##      MIPS exception vectors
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   nickg
## Contributors:        nickg, dmoseley
## Date:        1998-02-04
## Purpose:     MIPS exception vectors
## Description: This file defines the code placed into the exception
##              vectors. It also contains the first level default VSRs
##              that save and restore state for both exceptions and
##              interrupts.
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <pkgconf/system.h>     
#include <pkgconf/hal.h>

#ifdef CYGPKG_KERNEL
# include <pkgconf/kernel.h>    
#endif
                        
#include <cyg/hal/arch.inc>     
#include <cyg/hal/hal_arch.h>   
        
#ifdef at
#undef at
#endif
        .extern cyg_instrument

##-----------------------------------------------------------------------------
## Hardware supplied vectors
        
        .set    noreorder

        .section ".reset_vector","ax"

        # Reset vector at 0xBFC00000

FUNC_START(reset_vector)

#ifndef CYG_HAL_STARTUP_RAM
#  if defined(CYGPKG_HAL_RESET_VECTOR_FIRST_CODE)
        hal_reset_vector_first_code
#  endif
#  if defined(CYGPKG_HAL_EARLY_INIT)
        hal_early_init
#  endif
        # Decide whether this is an NMI, cold or warm boot.

        mfc0    k0,status               # get status reg
        lui     k1,0x0008               # isolate NMI bit
        and     k1,k1,k0                
        beqz    k1,1f                   # skip if zero
        nop

        lar     k1,__nmi_entry          # jump to ROM nmi code
        jalr    k1
        nop
1:
        lui     k1,0x0010               # isolate soft reset bit
        and     k1,k1,k0                
        beqz    k1,2f                   # skip if zero
        nop

        lar     k1,__warm_start         # jump to ROM warm_start code
        jr      k1
        nop
2:
        la      k0,INITIAL_CONFIG0      # Set up config0 register
        mtc0    k0,config0              # to disable cache
#endif  
        lar     v0,_start               # jump to start
#ifdef CYGARC_START_FUNC_UNCACHED
        CYGARC_ADDRESS_REG_UNCACHED(v0)
#endif

        jr      v0
        nop                             # (delay slot)

FUNC_END(reset_vector)
        
        .section ".debug_vector","ax"
                
        # Debug vector at 0xBFC00200
        
FUNC_START(debug_vector)
        la      k0,32*4
        la      k1,hal_vsr_table        # Get VSR table
        lw      k1,32*4(k1)             # load debug vector
        jr      k1                      # go there
        nop                             # (delay slot)
FUNC_END(debug_vector)

        .section ".other_vector","ax"

        # Common vector at 0x80000080 or 0xBFC00180
        
FUNC_START(other_vector)
        mfc0    k0,cause                # K0 = exception cause
        nop
        andi    k0,k0,0x7F              # isolate exception code
        la      k1,hal_vsr_table        # address of VSR table
        add     k1,k1,k0                # offset of VSR entry
        lw      k1,0(k1)                # k1 = pointer to VSR
        jr      k1                      # go there
        nop                             # (delay slot)
FUNC_END(other_vector)
        
        .section ".utlb_vector","ax"

FUNC_START(utlb_vector)
        mfc0    k0,cause                # K0 = exception cause
        nop
        andi    k0,k0,0x7F              # isolate exception code
        la      k1,hal_vsr_table        # address of VSR table
        add     k1,k1,k0                # offset of VSR entry
        lw      k1,0(k1)                # k1 = pointer to VSR
        jr      k1                      # go there
        nop                             # (delay slot)
FUNC_END(utlb_vector)

##-----------------------------------------------------------------------------
## Startup code

        .text
        
FUNC_START(_start)

        # Initialize hardware
        hal_cpu_init
        hal_diag_init
        hal_mmu_init
        hal_fpu_init
        hal_memc_init
        hal_intc_init
        hal_cache_init
        hal_timer_init
                        
#ifdef CYGARC_START_FUNC_UNCACHED
        # switch to cached execution address if necessary
        # assumption is that hal_cache_init makes this safe
        lar     v0,1f
        jr      v0
        nop
   1:
#endif
        
        # Load Global Pointer register.
        la      gp,_gp

        # load initial stack pointer
        la      a0,__interrupt_stack
        move    sp,a0

        hal_mon_init
                
#ifdef CYG_HAL_STARTUP_ROM
        # Copy data from ROM to RAM

        .extern hal_copy_data
        jal     hal_copy_data
        nop

#endif

        # Zero BSS

        .extern hal_zero_bss
        jal     hal_zero_bss
        nop

        # Call variant and platform HAL
        # initialization routines.

        .extern hal_variant_init
        jal     hal_variant_init
        nop

        .extern hal_platform_init
        jal     hal_platform_init
        nop

        # Call constructors
        .extern cyg_hal_invoke_constructors
        jal     cyg_hal_invoke_constructors
        nop

#if defined(CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS)
        .extern initialize_stub
        jal     initialize_stub
        nop
#endif
#if defined(CYGDBG_HAL_MIPS_DEBUG_GDB_CTRLC_SUPPORT)
        .extern hal_ctrlc_isr_init
        jal     hal_ctrlc_isr_init
        nop
#endif

        # Call cyg_start        
        
        .extern cyg_start
        j       cyg_start
        lui     ra,0
        
FUNC_END(_start )


##-----------------------------------------------------------------------------
                
FUNC_START(__warm_start)

        ## The following is debug code left in here for now in case it
        ## proves useful in the near future.    
#if 0
        move    s0,t0
        move    s1,a1
        
#       hal_diag_init

        hal_diag_writec '$'
        mvafc0  a0,$30                  # get ErrorEPC
        lar     k0,hal_diag_ai_write_hex8
        jalr    k0
        nop
        hal_diag_writec '-'     
        move    a0,s0
        jalr    k0
        nop
        hal_diag_writec '-'     
        move    a0,s1
        jalr    k0
        nop
1:      
        b       1b
        nop
#endif

        # Treat a warm-start either as a cold-start or an NMI
#if defined(CYGHWR_HAL_MIPS_WARMSTART_COLDSTART)
        lar     v0,_start               # jump to start
        jr      v0
        nop                             # (delay slot)
#else
        # Defaults to NMI
        b       __nmi_entry
        nop
#endif        

FUNC_END(__warm_start)          

##-----------------------------------------------------------------------------
        
FUNC_START(__nmi_entry)         

        # Clear exception state
        hal_cpu_except_enable
        
        # Move the ErrorEPC register to the EPC register so that the
        # default exception handler saves the right PC value.
        mvafc0  k0,$30
        nop; nop; nop;
        mvatc0  k0,epc
        nop; nop; nop;  

#if (INITIAL_SR & 0x00400000) == 0
        # Taking this exception will have set the BEV bit to 1.
        # If we normally run with it zero, we must clear it here.
        mfc0    k0,status       
        la      k1,0xFFBFFFFF
        and     k0,k0,k1
        mtc0    k0,status
#endif  

        la      k0,34*4
        la      k1,hal_vsr_table        # Get VSR table
        lw      k1,34*4(k1)             # load NMI vector
        jr      k1                      # go there
        nop                             # (delay slot)
        
FUNC_END(__nmi_entry)

##-----------------------------------------------------------------------------
## Default exception VSR.
## Saves machine state and calls external handling code.
        
FUNC_START(__default_exception_vsr)

        # We enter here with all of the CPU state still
        # in its registers except:
        # K0 = vector index
        # K1 = address of this function

        move    k1,sp                   # K1 = original SP
        
        addi    sp,sp,-mips_exception_decrement
                                # space for registers + safety margin

        sw      k0,mipsreg_vector(sp)   # store vector

        # store GPRs
        .set    noat
        sgpr    0,sp
        sgpr    1,sp
        sgpr    2,sp
        sgpr    3,sp
        sgpr    4,sp
        sgpr    5,sp
        sgpr    6,sp
        sgpr    7,sp
        sgpr    8,sp
        sgpr    9,sp
        sgpr    10,sp
        sgpr    11,sp
        sgpr    12,sp
        sgpr    13,sp
        sgpr    14,sp
        sgpr    15,sp
        sgpr    16,sp
        sgpr    17,sp
        sgpr    18,sp
        sgpr    19,sp
        sgpr    20,sp
        sgpr    21,sp
        sgpr    22,sp
        sgpr    23,sp
        sgpr    24,sp
        sgpr    25,sp
#       sgpr    26,sp   # == K0
#       sgpr    27,sp   # == K1
        sgpr    28,sp   # == GP
#       sgpr    29,sp   # == SP
        sgpr    30,sp   # == FP
        sgpr    31,sp   # == RA
        .set    at
        
        mfhi    a0
        mflo    a1
        shi     a0,sp
        slo     a1,sp

        # K1 contains original SP
        ssp     k1,sp                   # store in reg dump     
        
        # save remaining machine state registers        
        mfc0    t0,cause
        mfc0    t1,status
        mfc0    t2,cachectrl
        mvafc0  t3,badvr
        mfc0    t4,config
        mfc0    t5,prid
        mvafc0  t6,epc
        
        sw      t0,mipsreg_cause(sp)
        sw      t1,mipsreg_sr(sp)
        sw      t2,mipsreg_cachectrl(sp)
        sva     t3,mipsreg_badvr(sp)
        sw      t4,mipsreg_config(sp)
        sw      t5,mipsreg_prid(sp)
        sva     t6,mipsreg_pc(sp)

        hal_fpu_save sp
        
        # The machine state is now all saved on the stack.

        hal_diag_excpt_start
        
        # Load Global Pointer register.
        la      gp,_gp
        
        move    s0,sp                           # save pointer to saved state

#if defined(CYGSEM_HAL_ROM_MONITOR) && \
    defined(CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK)

        la      a0,__interrupt_stack            # a0 = stack top
        la      a1,__interrupt_stack_base       # a1 = stack base
        sub     a3,sp,a1                        # a3 = sp - base
        bltz    a3,1f                           # not on istack if < 0 
        nop                                     # delay slot
        sub     t0,a0,sp                        # t0 = top - sp
        bgtz    t0,8f                           # already on istack if > 0 
        nop                                     # delay slot
1:      
        move    sp,a0                           # switch to istack
8:
        addi    sp,sp,-8                        # space for old SP 
                                                # (8 to keep dword alignment!)
        sw      s0,0(sp)                        # save old SP on stack
        
#endif          
        addi    sp,sp,-mips_stack_frame_size    # make a null frame     

        # Need to set up back pointers etc. ???

        hal_cpu_except_enable                   # reenable exceptions

        .extern cyg_hal_exception_handler
        jal     cyg_hal_exception_handler       # call C code
        move    a0,s0                           # arg0 = register dump (delay slot)
                
#if defined(CYGSEM_HAL_ROM_MONITOR) && \
    defined(CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK)

        # If we are returning from the last nested exception, move back
        # to the thread stack.
        # Since we have arranged for the top of stack location to
        # contain the sp we need to go back to here, just pop it off
        # and put it in SP.

        lw      sp,mips_stack_frame_size(sp)    # sp = *sp
        subu    sp,sp,mips_stack_frame_size     # make a null frame             
#endif
        
        j       restore_state
        nop
                                
FUNC_END(__default_exception_vsr)

##------------------------------------------------------------------------------
## Default interrupt VSR.
## Saves machine state and calls appropriate ISR. When done, calls
## interrupt_end() to finish up and possibly reschedule.        

FUNC_START(__default_interrupt_vsr)

        
        # We enter here with all of the CPU state still
        # in its registers except:
        # K0 = vector index
        # K1 = address of this function

        move    k1,sp                   # K1 = original SP
                
        addi    sp,sp,-mips_exception_decrement
                                # space for registers + safety margin

        sw      k0,mipsreg_vector(sp)   # store vector

        # store GPRs
        .set    noat
        sgpr    0,sp
        sgpr    1,sp
        sgpr    2,sp
        sgpr    3,sp
        sgpr    4,sp
        sgpr    5,sp
        sgpr    6,sp
        sgpr    7,sp
        sgpr    8,sp
        sgpr    9,sp
        sgpr    10,sp
        sgpr    11,sp
        sgpr    12,sp
        sgpr    13,sp
        sgpr    14,sp
        sgpr    15,sp
        sgpr    16,sp
        sgpr    17,sp
        sgpr    18,sp
        sgpr    19,sp
        sgpr    20,sp
        sgpr    21,sp
        sgpr    22,sp
        sgpr    23,sp
        sgpr    24,sp
        sgpr    25,sp
#       sgpr    26,sp   # == K0
#       sgpr    27,sp   # == K1
        sgpr    28,sp   # == GP
#       sgpr    29,sp   # == SP
        sgpr    30,sp   # == FP
        sgpr    31,sp   # == RA
        .set    at
        
        mfhi    a0
        mflo    a1
        shi     a0,sp
        slo     a1,sp

        # K1 contains original SP
        ssp     k1,sp                   # store in reg dump     
                
        mfc0    t1,status
        mfc0    t2,cachectrl
        mvafc0  t3,epc
        
        sw      t1,mipsreg_sr(sp)
        sw      t2,mipsreg_cachectrl(sp)
        sva     t3,mipsreg_pc(sp)

        hal_fpu_save sp
                
        # The machine state is now all saved on the stack.

        # Load Global Pointer register.
        la      gp,_gp
        
#ifdef CYGFUN_HAL_COMMON_KERNEL_SUPPORT                 
        .extern cyg_scheduler_sched_lock
        la      v0,cyg_scheduler_sched_lock
        lw      a0,0(v0)
        addi    a0,a0,1
        sw      a0,0(v0)
#endif

        move    s0,sp                           # save pointer to saved state

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK 

        la      a0,__interrupt_stack            # a0 = stack top
        la      a1,__interrupt_stack_base       # a1 = stack base
        sub     a3,sp,a1                        # a3 = sp - base
        bltz    a3,1f                           # not on istack if < 0 
        nop                                     # delay slot
        sub     t0,a0,sp                        # t0 = top - sp
        bgtz    t0,8f                           # already on istack if > 0 
        nop                                     # delay slot
1:      
        move    sp,a0                           # switch to istack
8:
        addi    sp,sp,-8                        # space for old SP 
                                                # (8 to keep dword alignment!)
        sw      s0,0(sp)                        # save old SP on stack
        
#endif
                                        
        subu    sp,sp,mips_stack_frame_size     # make a null frame     

        # Need to set up back pointers etc. ???

        # Decode external interrupt via interrupt controller

        hal_intc_decode s2

        # Here, s2 contains the number of the interrupt being serviced,
        # we need to derive from that the vector number to call in the ISR
        # table.
        
        hal_intc_translate s2,s1
        
        # Here s1 is the number of the vector to be called and s2 is
        # the number of the interrupt being serviced. 

        hal_diag_intr_start
                
#if defined(CYGPKG_KERNEL_INSTRUMENT) && defined(CYGDBG_KERNEL_INSTRUMENT_INTR)

        # Call cyg_instrument to record that this interrupt is being raised.
                
        li      a0,0x0301                       # a0 = type = INTR,RAISE
        move    a1,s1                           # a1 = vector number
        jal     cyg_instrument                  # call instrument function
         move   a2,s2                           # a2 = interrupt number
#endif

#if defined(CYGDBG_HAL_MIPS_DEBUG_GDB_CTRLC_SUPPORT)
        # If we are supporting Ctrl-C interrupts from GDB, we must squirrel
        # away a pointer to the save interrupt state here so that we can
        # plant a breakpoint at some later time.
        
        .extern hal_saved_interrupt_state
        la      v0,hal_saved_interrupt_state
        sw      s0,0(v0)
        
#endif
        
        sll     s1,s1,2                         # s1 = byte offset of vector

        hal_cpu_except_enable                   # reenable exceptions
                        
        la      t2,hal_interrupt_handlers       # handler table
        add     t2,t2,s1                        # address of ISR ptr
        lw      t2,0(t2)                        # ISR pointer

        la      a1,hal_interrupt_data           # data table
        add     a1,a1,s1                        # address of data ptr
        lw      a1,0(a1)                        # Data pointer

        move    a0,s2                           # pass interrupt number

        jalr    t2                              # call ISR via t2
        nop                                     # (delay slot)

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK

        # If we are returning from the last nested interrupt, move back
        # to the thread stack. interrupt_end() must be called on the
        # thread stack since it potentially causes a context switch.
        # Since we have arranged for the top of stack location to
        # contain the sp we need to go back to here, just pop it off
        # and put it in SP.

        
        lw      sp,mips_stack_frame_size(sp)    # sp = *sp
        subu    sp,sp,mips_stack_frame_size     # make a null frame             
#endif
        
#ifdef CYGFUN_HAL_COMMON_KERNEL_SUPPORT

        # We only need to call _interrupt_end() when there is a kernel
        # present to do any tidying up.
        
        # On return v0 bit 1 will indicate whether a DSR is
        # to be posted. Pass this together with a pointer to
        # the interrupt object we have just used to the
        # interrupt tidy up routine.

        # Note that s0, s1 and s2 are defined to be preserved across
        # calls by the calling convention, so they still contain
        # the register dump, the vector offset and the interrupt number
        # respectively.

        move    s2,v0
                
        la      a1,hal_interrupt_objects        # interrupt object table
        add     a1,a1,s1                        # address of object ptr
        lw      a1,0(a1)                        # a1 = object ptr

        move    a2,s0                           # arg3 = saved register dump
        
        .extern interrupt_end
        jal     interrupt_end                   # call into C to finish off 
         move   a0,v0                           # put ISR result in arg0
        
        move    v0,s2                           # return value from isr
#endif
                                
restore_state:
#if defined(CYGSEM_HAL_USE_ROM_MONITOR_CygMon)
        move    k0,v0
#endif

        # All done, restore CPU state and continue

        addi    sp,sp,mips_stack_frame_size     # retrieve CPU state ptr

        # Disable interrupts again while we restore state. 
        hal_cpu_int_disable

        hal_diag_restore

        hal_fpu_load sp

        lw      t0,mipsreg_cachectrl(sp)
        lhi     t1,sp
        llo     t2,sp

        mtc0    t0,cachectrl
        mthi    t1
        mtlo    t2

        # load GPRs
        .set    noat
#       lgpr    0,sp
        lgpr    1,sp
        lgpr    2,sp
        lgpr    3,sp
        lgpr    4,sp
        lgpr    5,sp
        lgpr    6,sp
        lgpr    7,sp
        lgpr    8,sp
        lgpr    9,sp
        lgpr    10,sp
        lgpr    11,sp
        lgpr    12,sp
        lgpr    13,sp
        lgpr    14,sp
        lgpr    15,sp
        lgpr    16,sp
        lgpr    17,sp
        lgpr    18,sp
        lgpr    19,sp
        lgpr    20,sp
        lgpr    21,sp
        lgpr    22,sp
        lgpr    23,sp
        lgpr    24,sp
        lgpr    25,sp
#       lgpr    26,sp   # == K0
#       lgpr    27,sp   # == K1
        lgpr    28,sp   # == GP
#       lgpr    29,sp   # == SP
        lgpr    30,sp   # == FP
        lgpr    31,sp   # == RA
        .set    at

#if defined(CYGSEM_HAL_USE_ROM_MONITOR_CygMon)

        # If we have a Cygmon that wants to listen to network interrupts, then
        # the return code from the earlier call to hal_default_isr() will
        # have been negative to indicate this. So we jump into Cygmon here
        # because Cygmon requires the processor state to be the same as when
        # the interrupt was taken, but with k0 as the exception number.
        
        bgez    k0,1f
        nop
        # Check for new cygmon
        sw      k0,(mipsreg_regs+26*4)(sp)      # save k0
        la      k1,0x80000100 + 41*4            # New cygmon "magic" id
        lw      k1,0(k1)
        lui     k0,0x55aa
        ori     k0,0x4321
        bne     k0,k1,1f
                        
        # Need to let cygmon handle this
        la      k1,0x80000100 + 39*4            # stub entry vector
        lw      k0,(mipsreg_regs+26*4)(sp)      # restore k0
        lw      k1,0(k1)
        lw      sp,(mipsreg_regs+29*4)(sp)      # restore SP
        sll     k0,1                            # clear bit 31.
        jr      k1
        srl     k0,1
    1:
#endif

        lw      k1,mipsreg_sr(sp)               # K1 = saved SR

#if 0 < CYGINT_HAL_MIPS_INTERRUPT_RETURN_KEEP_SR_IM
        # Keep the current settings of the IM[7:0] bits within the status
        # register.  These may be used as interrupt masks, so if an ISR or
        # DSR masks interrupts they must be preserved.
        # If they are not used, then this does no harm.
        ori     k0,zero,0xff00
        nor     k0,k0,k0                        # 0xffff00ff
        and     k1,k1,k0                        # all interrupts disabled

        mfc0    k0,status                       # V0 = current SR
        nop
        nop
        andi    k0,k0,0xff00                    # preserve interrupt set
        or      k1,k1,k0                        # insert into "saved SR"
#endif // 0 < CYGINT_HAL_MIPS_INTERRUPT_RETURN_KEEP_SR_IM
        lva     k0,mipsreg_pc(sp)               # K0 = return PC
        lsp     sp,sp                           # load SP

        # Invoke CPU specific mechanism for returning from this
        # exception
        
        hal_cpu_eret k0,k1
                
FUNC_END(__default_interrupt_vsr)

        hal_intc_decode_data

##-----------------------------------------------------------------------------
## Execute pending DSRs on the interrupt stack with interrupts enabled.
## Note: this can only be called from code running on a thread stack
        
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
        .extern cyg_interrupt_call_pending_DSRs

FUNC_START(hal_interrupt_stack_call_pending_DSRs)
        mfc0    t0,status                       # get status register value
        la      v0,__interrupt_stack            # v0 = interrupt stack
        move    v1,sp                           # v1 = original stack ptr
        move    sp,v0                           # sp = interrupt stack
        addi    sp,sp,-32                       # make a null frame
        sw      v1,16(sp)                       # save old sp
        sw      ra,20(sp)                       # save old ra
        sw      t0,24(sp)                       # save old sr

        hal_cpu_int_enable

        jal     cyg_interrupt_call_pending_DSRs # call back to kernel
        nop

        lw      a0,24(sp)                       # get status reg

        hal_cpu_int_merge a0                    # merge with current SR
        
        lw      ra,20(sp)                       # restore ra
        lw      sp,16(sp)                       # restore sp

        jr      ra                              # go back
        nop                                     # delay slot
        
FUNC_END(hal_interrupt_stack_call_pending_DSRs) 
#endif          

##-----------------------------------------------------------------------------
## Short circuit in case any code tries to use "__gccmain()"

FUNC_START(__gccmain)
        jr      ra
        nop
FUNC_END(__gccmain)

##-----------------------------------------------------------------------------
## Switch to a new stack.
## This is used in RedBoot to allow code to execute in a different
## stack context.

FUNC_START(hal_program_new_stack)
        # Arguments are:
        # a0 = function to call
        # a1 = stack pointer to use

        move    v1,sp                           # v1 = original stack ptr
        move    sp,a1                           # sp = new stack
        addi    sp,sp,-32                       # make a null frame
        sva     v1,8(sp)                        # save old sp
        sva     ra,16(sp)                       # save old ra

        jalr    a0                              # call function
         nop

        lva     ra,16(sp)                       # restore ra
        lva     sp,8(sp)                        # restore sp

        jr      ra                              # go back
         nop                                    # delay slot
        
FUNC_END(hal_program_new_stack)
                
##-----------------------------------------------------------------------------
## hal_zero_bss
## Zero bss. Done in assembler to be optimal rather than using memset,
## which would risk zeroing bss while using it.
        
FUNC_START(hal_zero_bss)
#ifdef CYGHWR_HAL_MIPS_64BIT
#define STORE_OP        sd
#define BLOCK_SHIFT     6
#else
#define STORE_OP        sw
#define BLOCK_SHIFT     5
#endif
        la      a0,__bss_start          # start of bss
        la      a1,__bss_end            # end of bss
        andi    a2,a0,mips_regsize-1    # is bss aligned?
        bne     a2,zero,1f              # skip word copy
        nop
        
        # loop with 8 stores per loop
        subu            a3,a1,a0                # get length
        srl             a3,a3,BLOCK_SHIFT       # get number of blocks
        sll             a3,a3,BLOCK_SHIFT       # get length of blocks
        addu            a3,a0,a3                # get end addr of blocks
2:      STORE_OP        zero,(mips_regsize*0)(a0)
        STORE_OP        zero,(mips_regsize*1)(a0)
        STORE_OP        zero,(mips_regsize*2)(a0)
        STORE_OP        zero,(mips_regsize*3)(a0)
        STORE_OP        zero,(mips_regsize*4)(a0)
        STORE_OP        zero,(mips_regsize*5)(a0)
        STORE_OP        zero,(mips_regsize*6)(a0)
        STORE_OP        zero,(mips_regsize*7)(a0)
        addu            a0,a0,mips_regsize*8    # next addr
        bne             a3,a0,2b                # to next store
        nop

        # If length is a multiple of block size then we
        # are done and need to skip the byte loop
        beq             a1,a0,3f
        nop
        
        # finish 1 byte at a time
1:      sb      zero,0(a0)              # zero memory
        addiu   a0,a0,1                 # next addr
        bne     a0,a1,1b                # to next store
        nop
3:      jr      ra
        nop
FUNC_END(hal_zero_bss)

        
##-----------------------------------------------------------------------------
## VSR springboard for break instruction exceptions
## Both GCC and GDB use break instructions. GCC for division-by-zero
## notification and GDB for program-flow breakpoints. This springboard
## looks for the d-b-z kind and directs them to another vector so libc
## can handle these without affecting the debugger.
        
FUNC_START(__break_vsr_springboard)
        mvafc0  k0,epc
        mfc0    k1,cause
        bltzl   k1,1f
        addi    k0,k0,4                 # delay slot (only executed if BD set)
1:      lw      k1,0(k0)                # get break instruction
        la      k0,0x0007000d           # break 0x7 used by GCC for d-b-z
        bne     k0,k1,2f
        nop
        ori     k0,$0,14*4              # CYGNUM_HAL_VECTOR_DIV_BY_ZERO
        la      k1,hal_vsr_table        # address of VSR table
        add     k1,k1,k0                # offset of VSR entry
        lw      k1,0(k1)                # k1 = pointer to VSR
        jr      k1                      # go there
        nop                             # (delay slot)
2:      ori     k0,$0,9*4               # CYGNUM_HAL_VECTOR_BREAKPOINT
        j       __default_exception_vsr
        nop                             # (delay slot)
FUNC_END(__break_vsr_springboard)


##-----------------------------------------------------------------------------
## Interrupt Stack.
## Used during intialization and for executing ISRs.
        
        .bss

        .balign 16
        .global cyg_interrupt_stack_base
cyg_interrupt_stack_base:
__interrupt_stack_base:
        .rept CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE
        .byte 0
        .endr
        .balign 16
        .global cyg_interrupt_stack
cyg_interrupt_stack:
__interrupt_stack:

        .long   0,0,0,0,0,0,0,0 

##-----------------------------------------------------------------------------
## VSR table.
## The main interrupt code indirects through here to find the VSR
## to execute for each architecture defined interrupt.
## This is only used for simulated targets, on real targets a fixed location VSR
## table is now allocated at 0x80000100.

#ifndef CYG_HAL_MIPS_VSR_TABLE_DEFINED
        
##      .section ".vsr_table","a"
        
        .data
                        
        .globl  hal_vsr_table

hal_vsr_table:  
        .long   __default_interrupt_vsr 
        .rept   63
        .long   __default_exception_vsr 
        .endr

#endif  
        
#------------------------------------------------------------------------------
# Interrupt vector tables.
# These tables contain the isr, data and object pointers used to deliver
# interrupts to user code.
# hal_interrupt_level contains the interrupt level set by 
# HAL_INTERRUPT_CONFIGURE().
# This is a default set that provide support only for the 6 external
# interrupts in the status/cause registers. Platforms or boards are expected
# to define their own versions of these if they have their own interrupt mappings.

#ifndef CYG_HAL_MIPS_ISR_TABLES_DEFINED
        
        .extern hal_default_isr
        
        .data

        .globl  hal_interrupt_handlers
hal_interrupt_handlers:
        .long   hal_default_isr
        .long   hal_default_isr
        .long   hal_default_isr
        .long   hal_default_isr
        .long   hal_default_isr
        .long   hal_default_isr


        .globl  hal_interrupt_data
hal_interrupt_data:
        .rept   6
        .long   0
        .endr

        .globl  hal_interrupt_objects
hal_interrupt_objects:
        .rept   6
        .long   0
        .endr

#endif  

##-----------------------------------------------------------------------------
## end of vectors.S