URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mips/] [idt79s334a/] [v2_0/] [src/] [plf_misc.c] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
//========================================================================== // // plf_misc.c // // HAL platform miscellaneous functions // //========================================================================== //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): tmichals // Contributors: // Date: 2002-09-01 // Purpose: HAL miscellaneous functions // Description: This file contains miscellaneous functions provided by the // HAL. // //####DESCRIPTIONEND#### // //========================================================================*/ #include <pkgconf/hal.h> #include <pkgconf/system.h> #include CYGBLD_HAL_PLATFORM_H #include <cyg/infra/cyg_type.h> // Base types #include <cyg/infra/cyg_trac.h> // tracing macros #include <cyg/infra/cyg_ass.h> // assertion macros #include <cyg/hal/hal_arch.h> // architectural definitions #include <cyg/hal/hal_intr.h> // Interrupt handling #include <cyg/hal/hal_cache.h> // Cache handling /* This is the Reference board configuration */ #include <cyg/hal/idt79rc233x.h> #include <cyg/io/pci_hw.h> #include <cyg/io/pci.h> void hal_rc334PciInit (void); static void mmuInit (void); static void sysDisableBusError (void) ; static void sysEnableBusError(void); void ecosPciConfigOutByte( int busNo, int devFnNo,int regOffset,unsigned char data ); void ecosPciConfigOutHalfWord( int busNo,int devFnNo,int regOffset,unsigned short data ); void ecosPciConfigOutWord( int busNo,int devFnNo,int regOffset,unsigned int data ); unsigned char ecosPciConfigInByte(int busNo, int devFnNo,int regOffset); unsigned short ecosPciConfigInHalfWord( int busNo,int devFnNo,int regOffset); unsigned int ecosPciConfigInWord( int busNo, int devFnNo,int regOffset); void displayLED(char *str, int count); /*------------------------------------------------------------------------*/ /* this is called from the kernel */ void hal_platform_init(void) { HAL_ICACHE_INVALIDATE_ALL(); HAL_ICACHE_ENABLE(); HAL_DCACHE_INVALIDATE_ALL(); HAL_DCACHE_ENABLE(); displayLED("eCOS", 4); hal_if_init(); mmuInit(); hal_rc334PciInit(); } /* PCI Configuration Registers */ #define PCI_CFG_VENDORID 0x00 #define PCI_CFG_DEVICEID 0x02 #define PCI_CFG_COMMAND 0x04 #define PCI_CFG_STATUS 0x06 #define PCI_CFG_REVID 0x08 #define PCI_CFG_CLASS_CODE 0x09 #define PCI_CFG_CACHELINE 0x0c #define PCI_CFG_LATENCY_TIMER 0x0d #define PCI_CFG_HEADER_TYPE 0x0e #define PCI_CFG_BIST 0x0f #define PCI_CFG_BAR0 0x10 #define PCI_CFG_BAR1 0x14 #define PCI_CFG_BAR2 0x18 #define PCI_CFG_BAR3 0x1c #define PCI_CFG_BAR4 0x20 #define PCI_CFG_BAR5 0x24 #define PCI_CFG_CIS_POINTER 0x28 #define PCI_CFG_SUB_VENDORID 0x2c #define PCI_CFG_SUB_SYSTEMID 0x2e #define PCI_CFG_EXP_ROM 0x30 #define PCI_CFG_CAPABILITIES 0x34 #define PCI_CFG_RESERVED1 0x35 #define PCI_CFG_RESERVED2 0x38 #define PCI_CFG_INT_LINE 0x3c #define PCI_CFG_INT_PIN 0x3d #define PCI_CFG_MIN_GRANT 0x3e #define PCI_CFG_MAX_LATENCY 0x3f #define PCI_CFG_TRDY_TIMEOUT 0x40 #define PCI_CFG_RETRY_TIMEOUT 0x41 #define RC334_CONFIG0 0x80000000 /* Typical values used in this example */ #define RC334_PCI_CONFIG0 0x0204111D /* Device ID & Vendor ID */ #define RC334_PCI_CONFIG1 0x00200157 /* Command : MWINV, Enable bus master, memory I/O access */ #define RC334_PCI_CONFIG2 0x06800001 /* Class Code & Revision ID */ #define RC334_PCI_CONFIG3 0x0000ff04 /* BIST, Header Type, Master Latency, Cache line size */ #define RC334_PCI_CONFIG4 0xA0000008 /* Memory Base Address Reg, prefetchable */ #define RC334_PCI_CONFIG5 0x60000000 /* Integrated Controller Reg, non-prefetchable */ #define RC334_PCI_CONFIG6 0x00800001 /* IO Base Address Reg */ #define RC334_PCI_CONFIG7 0x00000000 /* Unused BAR space, assign some address that never gets generated on PCI Bus */ /* Reserved registers */ #define RC334_PCI_CONFIG8 0x00000000 #define RC334_PCI_CONFIG9 0x00000000 #define RC334_PCI_CONFIG10 0x00000000 /* Subsystem ID and the subsystem Vendor ID */ #define RC334_PCI_CONFIG11 0x00000000 /* Reserved registers */ #define RC334_PCI_CONFIG12 0x00000000 #define RC334_PCI_CONFIG13 0x00000000 #define RC334_PCI_CONFIG14 0x00000000 /* Max latency, Min Grant, Interrupt pin and interrupt line */ #define RC334_PCI_CONFIG15 0x38080101 /* Retry timeout value, TRDY timeout value. Set to default 0x80 */ #define RC334_PCI_CONFIG16 0x00008080 /* Rc32334 specific PCI registers */ #define RC334_PCI_REG_BASE 0xb8000000 #define RC334_CPUTOPCI_BASE_REG1 (RC334_PCI_REG_BASE + 0x20B0) #define RC334_CPUTOPCI_BASE_REG2 (RC334_PCI_REG_BASE + 0x20B8) #define RC334_CPUTOPCI_BASE_REG3 (RC334_PCI_REG_BASE + 0x20C0) #define RC334_CPUTOPCI_BASE_REG4 (RC334_PCI_REG_BASE + 0x20C8) #define RC334_PCI_ARB_REG (RC334_PCI_REG_BASE + 0x20E0) #define RC334_PCITOCPU__BASE_REG1 (RC334_PCI_REG_BASE + 0x20E8) #define RC334_PCITOCPU__BASE_REG2 (RC334_PCI_REG_BASE + 0x20F4) #define RC334_PCITOCPU__BASE_REG3 (RC334_PCI_REG_BASE + 0x2100) #define RC334_PCITOCPU__BASE_REG4 (RC334_PCI_REG_BASE + 0x210C) /* Considering a typical case */ #define CPUTOPCI_BASE_REG1_VAL 0x40000001 #define CPUTOPCI_BASE_REG2_VAL 0x00000000 #define CPUTOPCI_BASE_REG3_VAL 0x00000000 #define CPUTOPCI_BASE_REG4_VAL 0x18800001 //TCM#define PCITOCPU_BASE_REG3_VAL 0x00000000 //TCM#define PCITOCPU_BASE_REG4_VAL 0x18000051 /* Size field set to 0x14 : 1MB size */ #define RC334_PCITOCPU_BASE_REG1 (RC334_PCI_REG_BASE+0x20E8) #define RC334_PCITOCPU_BASE_REG2 (RC334_PCI_REG_BASE+0x20F4) #define RC334_PCITOCPU_BASE_REG3 (RC334_PCI_REG_BASE+0x2100) #define RC334_PCITOCPU_BASE_REG4 (RC334_PCI_REG_BASE+0x210C) #define PCITOCPU_MEM_BASE(addr) ( (addr & 0xFFFFFF)<<8) #define PCITOCPU_SIZE(i) ( ( i & 0x1F) << 2 ) #define PCITOCPU_EN_SWAP 1 #define SIZE_1MB 0x14 #define SIZE_64MB 0x1A #define SYS_MEM_BASE 0x0 /* local sdram starting address */ #define RC32334_INT_REG_BASE 0x18000000 /* Integrated controller's internal registers */ /* PCI Target Control Register is provided in the RC32334 to utilize eager prefetches and reduce target disconnects and retries. In the following example, an optimized value is picked that enables eager prefetch for all BAR's, enables Memory Write and Memory Write and Invalidate (MWMWI), uses threshold for target write FIFO of 8 words, and sets disconnect and retry timer to 40 PCI clocks */ #define PCI_TARGET_CONTROL_REG 0xB80020A4 #define PCI_TARGET_CONTROL_REG_VAL 0x7EF02828 /* BAR1 is selected as memory base register with 64 Mbyte address range starting at physical address 0x0000_0000, allowing external PCI masters to access the local SDRAM for data read and write. This register setting works with the BAR1 register in the PCI configuration register in the PCI bridge of the RC32334 which, in this example, has been set to 0xA000_0000. With the given settings, the external PCI masters can access addresses in the range 0xA000_0000 through 0xA3FF_FFFF using BAR1 which gets translated to address range 0x0000_0000 through 0x03FF_FFFF on the local CPU bus owing to the PCITOCPU_BASE_REG1 settings. */ #define PCITOCPU_BASE_REG1_VAL ((PCITOCPU_MEM_BASE(SYS_MEM_BASE)) | \ (PCITOCPU_SIZE(SIZE_64MB) ) | \ (PCITOCPU_EN_SWAP) ) /* BAR2 is selected as memory base register with 1 Mbyte range starting at the physical address 0x1800_0000. This maps to the RC32334 internal registers allowing external PCI masters to read/modify the RC32334 registers. In this example, the BAR2 register in the PCI configuration register of the RC32334 PCI bridge has been set to 0xB800_0000 (note that this address is in the PCI space and should not be confused with the CPU address map). External PCI masters can access memory range 0xB800_0000 through 0xB80F_FFFF, sufficient enough to access all the RC32334 internal registers. The PCITOCPU_BASE_REG2 settings map all PCI cycles falling in the above range to physical address range 0x1800_0000 — 0x180F_FFFF on the local CPU bus. */ #define PCITOCPU_BASE_REG2_VAL ((PCITOCPU_MEM_BASE(RC32334_INT_REG_BASE)) | \ (PCITOCPU_SIZE(SIZE_1MB) ) | \ (PCITOCPU_EN_SWAP) ) /* BAR3 is selected as IO base register with 1 Mbyte range mapped to address 0x1800_0000, providing another window for accessing the Integrated controller registers. In this example, the value for the BAR3 has been picked as 0x0000_0000 (address range 0x0000_00000 through 0x000F_FFFF). Any PCI IO cycles to this address range would get translated to local CPU address range of 0x1800_0000 through 0x180F_FFFF using this register settings. */ #define PCITOCPU_BASE_REG3_VAL ( \ (PCITOCPU_MEM_BASE(RC32334_INT_REG_BASE)) | \ (PCITOCPU_SIZE(SIZE_1MB) ) | \ (PCITOCPU_EN_SWAP) ) /* BAR4 register is not used. Therefore, it can be disabled by selecting the SIZE value 1-7 */ #define PCITOCPU_BASE_REG4_VAL ( PCITOCPU_SIZE( 1 ) ) /* Arbitration register value: Target Ready, internal arbiter, fixed priority */ #define PCI_ARB_REG_VAL 0x00000001 /* Rc32334 config address/data definitions */ #define PCI_CONFIG_ADDR_REG 0xb8002cf8 #define PCI_CONFIG_DATA_REG 0xb8002cfc /* BYTE SWAP macros */ #define HALF_WORD_SWAP(x) \ ( ( ( x << 8 ) & 0xff00) | \ ( (x >> 8 ) & 0x00ff ) ) #define WORD_SWAP(x)\ ( ( ( x << 24 ) & 0xff000000 ) | \ ( (x << 8 ) & 0x00ff0000 ) | \ ( (x >> 8 ) & 0x0000ff00 ) | \ ( (x >> 24 ) & 0x000000ff ) ) /* PCI Functions */ unsigned int pciConfigInWord( int busNo, int devNo, int funcNo, int regOffset); unsigned short pciConfigInHalfWord( int busNo, int devNo, int funcNo, int regOffset); unsigned char pciConfigInByte( int busNo, int devNo, int funcNo, int regOffset); void pciConfigOutWord ( int busNo, int devNo, int funcNo, int regOffset, unsigned int data ); void pciConfigOutHalfWord ( int busNo, int devNo, int funcNo, int regOffset, unsigned short data ); void pciConfigOutChar ( int busNo, int devNo, int funcNo, int regOffset, unsigned char data ); /* Rc32334 Bus error register. The bit7 of this register can be used to enable or disable the BusError. The bus error is disabled briefly at the time of pci Scanning and enabled thereafter. */ #define RC334_BUS_ERR_CNTL_REG 0xb8000010 /* Function name : hal_rc334PciInit Parameters passed : none return value : none The function initialises the configuration registers of Rc32334 PCI interface controller. */ void hal_rc334PciInit ( ) { unsigned int pciConfigData[17]; int index ; volatile unsigned int *configAddrReg ; volatile unsigned int *configDataReg ; volatile unsigned int *regPointer ; configAddrReg = (volatile unsigned int*) PCI_CONFIG_ADDR_REG; configDataReg = (volatile unsigned int*) PCI_CONFIG_DATA_REG; pciConfigData[0] = RC334_PCI_CONFIG0; pciConfigData[1] = RC334_PCI_CONFIG1; pciConfigData[2] = RC334_PCI_CONFIG2; pciConfigData[3] = RC334_PCI_CONFIG3; pciConfigData[4] = RC334_PCI_CONFIG4; pciConfigData[5] = RC334_PCI_CONFIG5; pciConfigData[6] = RC334_PCI_CONFIG6; pciConfigData[7] = RC334_PCI_CONFIG7; pciConfigData[8] = RC334_PCI_CONFIG8; pciConfigData[9] = RC334_PCI_CONFIG9; pciConfigData[10] = RC334_PCI_CONFIG10; pciConfigData[11] = RC334_PCI_CONFIG11; pciConfigData[12] = RC334_PCI_CONFIG12; pciConfigData[13] = RC334_PCI_CONFIG13; pciConfigData[14] = RC334_PCI_CONFIG14; pciConfigData[15] = RC334_PCI_CONFIG15; pciConfigData[16] = RC334_PCI_CONFIG16; *configAddrReg = (unsigned int)RC334_CONFIG0 ; /* This example writes to all the configuration registers. Some of the PCI configuration registers (such as Device ID, Vendor ID, Class Code, Revision ID, BIST, Header Type, Subsystem Vendor ID, Maximum Latency, Minimum Grant, Interrupt Pin) need not be initialized */ for (index =0; index <17; index++ ) { *configDataReg = pciConfigData[index]; *configAddrReg = *configAddrReg + 4; } /* Park the Address Register */ configAddrReg = ( volatile unsigned int*)0x0 ; /* Set Rc32334 specific registers */ regPointer = ( volatile unsigned int*)(RC334_CPUTOPCI_BASE_REG1) ; *regPointer = (unsigned int)(CPUTOPCI_BASE_REG1_VAL ); regPointer = (volatile unsigned int*)(RC334_CPUTOPCI_BASE_REG2) ; *regPointer = (unsigned int)(CPUTOPCI_BASE_REG2_VAL ); regPointer = (volatile unsigned int*)(RC334_CPUTOPCI_BASE_REG3) ; *regPointer = (unsigned int)(CPUTOPCI_BASE_REG3_VAL ); regPointer = (volatile unsigned int*)(RC334_CPUTOPCI_BASE_REG4) ; *regPointer = (unsigned int)(CPUTOPCI_BASE_REG4_VAL ); regPointer = (volatile unsigned int*)(RC334_PCITOCPU_BASE_REG1) ; *regPointer = (unsigned int)(PCITOCPU_BASE_REG1_VAL ); regPointer = ( volatile unsigned int*)(RC334_PCITOCPU_BASE_REG2) ; *regPointer = (unsigned int)(PCITOCPU_BASE_REG2_VAL ); regPointer = (volatile unsigned int*)(RC334_PCITOCPU_BASE_REG3) ; *regPointer = (unsigned int)(PCITOCPU_BASE_REG3_VAL ); regPointer = (volatile unsigned int*)(RC334_PCITOCPU_BASE_REG4) ; *regPointer = (unsigned int)(PCITOCPU_BASE_REG4_VAL ); regPointer = (volatile unsigned int*)PCI_TARGET_CONTROL_REG ; *regPointer = (unsigned int)PCI_TARGET_CONTROL_REG_VAL ; regPointer = (volatile unsigned int*)(RC334_PCI_ARB_REG); *regPointer = (unsigned int)(PCI_ARB_REG_VAL); } /* Function name : sysDisableBusError Disables the Bus Error prior to pciScan. */ static void sysDisableBusError ( ) { unsigned int* regPointer ; unsigned int data ; regPointer = (unsigned int*) ( RC334_BUS_ERR_CNTL_REG); data = *regPointer ; /* Set bit7 to disable busError */ data = data | 0x00000080 ; *regPointer = data ; } /* Function name : sysEnableBusError Enables the Bus Error after pciScan */ static void sysEnableBusError ( ) { unsigned int* regPointer ; unsigned int data ; regPointer = (unsigned int*) ( RC334_BUS_ERR_CNTL_REG); data = *regPointer ; /* Reset bit7 to enable busError */ data = data & 0xffffff7f; *regPointer = data ; } #define TLB_HI_MASK 0xffffe000 #define TLB_LO_MASK 0x3fffffff #define PAGEMASK_SHIFT 13 #define TLB_LO_SHIFT 6 #define PCI_PAGE_SIZE 0x01000000 /* 16 Mbyte */ #define MMU_PAGE_UNCACHED 0x00000010 #define MMU_PAGE_DIRTY 0x00000004 #define MMU_PAGE_VALID 0x00000002 #define MMU_PAGE_GLOBAL 0x00000001 #define PCI_MMU_PAGEMASK 0x00000fff #define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY| MMU_PAGE_VALID|MMU_PAGE_GLOBAL) #define PCI_MEMORY_SPACE1 0x40000000 #define PCI_MEMORY_SPACE2 0x60000000 #define PCI_IO_SPACE 0x18000000 /* Function name : mmuInit Tlb Initialisation for the PCI memory/IO windows. */ static void mmuInit ( ) { unsigned int Tlb_Attrib ; unsigned int Tlb_Hi ; unsigned int Tlb_Lo0 ; unsigned int Tlb_Lo1 ; unsigned int Page_Size ; unsigned int pageFrame ; unsigned int Tlb_Inx ; /* Uncached, dirty, global and valid MMU page */ Tlb_Attrib = PCI_MMU_PAGEATTRIB ; Page_Size = PCI_MMU_PAGEMASK ; Page_Size = (Page_Size << (PAGEMASK_SHIFT)); hal_setPageSize(Page_Size); /* * MMU mapping for PCI_MEMORY_SPACE1 * Map 16MB pages * Virtual 0x40000000-0x40ffffff to Physical 0x40000000 - 0x40ffffff * Virtual 0x41000000-0x41ffffff to Physical 0x41000000 - 0x41ffffff */ Tlb_Hi = PCI_MEMORY_SPACE1 ; /* VPN2:VirtualPageframeNumber%2 */ Tlb_Hi = (Tlb_Hi & TLB_HI_MASK) ; pageFrame = PCI_MEMORY_SPACE1 ; /* Even PFN:Page Frame Number */ pageFrame = pageFrame >> TLB_LO_SHIFT; Tlb_Lo0 = pageFrame ; Tlb_Lo0 = ( Tlb_Lo0 | Tlb_Attrib) ; Tlb_Lo0 = ( Tlb_Lo0 & TLB_LO_MASK); pageFrame = (PCI_MEMORY_SPACE1 | PCI_PAGE_SIZE) ; /* Odd PFN:Page Frame Number*/ pageFrame = pageFrame >> TLB_LO_SHIFT ; Tlb_Lo1 = pageFrame ; Tlb_Lo1 = ( Tlb_Lo1 | Tlb_Attrib) ; Tlb_Lo1 = ( Tlb_Lo1 & TLB_LO_MASK); Tlb_Inx = 0 ; hal_setTlbEntry(Tlb_Inx, Tlb_Hi, Tlb_Lo0, Tlb_Lo1); /* * MMU mapping for PCI_MEMORY_SPACE2 * Virtual 0x60000000-0x60ffffff to Physical 0x60000000 - 0x60ffffff * Virtual 0x61000000-0x61ffffff to Physical 0x61000000 - 0x61ffffff */ Tlb_Hi = PCI_MEMORY_SPACE2 ; /* VPN2 */ Tlb_Hi = ( Tlb_Hi & TLB_HI_MASK ); pageFrame = PCI_MEMORY_SPACE2 ; pageFrame = pageFrame >> TLB_LO_SHIFT ; /*Even PFN */ Tlb_Lo0 = pageFrame ; Tlb_Lo0 = ( Tlb_Lo0 | Tlb_Attrib) ; Tlb_Lo0 = ( Tlb_Lo0 & TLB_LO_MASK); pageFrame = ( PCI_MEMORY_SPACE2 | PCI_PAGE_SIZE ) ; pageFrame = pageFrame >> TLB_LO_SHIFT ; /* Odd PFN */ Tlb_Lo1 = pageFrame ; Tlb_Lo1 = ( Tlb_Lo1 | Tlb_Attrib) ; Tlb_Lo1 = ( Tlb_Lo1 & TLB_LO_MASK); Tlb_Inx = 1 ; hal_setTlbEntry(Tlb_Inx, Tlb_Hi, Tlb_Lo0, Tlb_Lo1); /* * MMU mapping PCI IO space * Virtual 0x18000000-0x18ffffff to Physical 0x18000000 - 0x18ffffff * Virtual 0x19000000-0x19ffffff to Physical 0x19000000 - 0x19ffffff */ Tlb_Hi = PCI_IO_SPACE ; /* VPN2 */ Tlb_Hi = ( Tlb_Hi & TLB_HI_MASK ); pageFrame = PCI_IO_SPACE ; pageFrame = pageFrame >> TLB_LO_SHIFT ; /* Even PFN */ Tlb_Lo0 = pageFrame ; Tlb_Lo0 = ( Tlb_Lo0 | Tlb_Attrib) ; Tlb_Lo0 = ( Tlb_Lo0 & TLB_LO_MASK); pageFrame = (PCI_IO_SPACE | PCI_PAGE_SIZE) ; pageFrame = pageFrame >> TLB_LO_SHIFT ; /* Odd PFN */ Tlb_Lo1 = pageFrame ; Tlb_Lo1 = ( Tlb_Lo1 | Tlb_Attrib) ; Tlb_Lo1 = ( Tlb_Lo1 & TLB_LO_MASK); Tlb_Inx = 2 ; hal_setTlbEntry(Tlb_Inx, Tlb_Hi, Tlb_Lo0, Tlb_Lo1); } /* ecos PCI functions */ void ecosPciConfigOutByte ( int busNo, int devFnNo, int regOffset, unsigned char data ){ unsigned int address ; address = ( ( (busNo << 16) & 0x00ff0000 ) | ( ( devFnNo << 8 ) & 0x0000ff00 ) ); address = ( address | 0x80000000 | (regOffset ) ); hal_sysConfigOutByte(address, data, (regOffset & 0x3) ); } void ecosPciConfigOutHalfWord ( int busNo, int devFnNo, int regOffset, unsigned short data ){ unsigned int address ; address = ( ( (busNo << 16) & 0x00ff0000 ) | ( ( devFnNo << 8 ) & 0x0000ff00) ); address = ( address | 0x80000000 | (regOffset ) ); hal_sysConfigOutHalfWord(address, data, (regOffset & 0x3) ); } void ecosPciConfigOutWord ( int busNo, int devFnNo, int regOffset, unsigned int data ){ unsigned int address ; address = ( ( (busNo << 16) & 0x00ff0000 ) | ( ( devFnNo << 8 ) & 0x0000ff00) ); address = ( address | 0x80000000 | (regOffset ) ); hal_sysConfigOutWord(address, data); } unsigned char ecosPciConfigInByte (int busNo, int devFnNo, int regOffset ){ unsigned int address ; unsigned char retVal ; address = ( ( (busNo << 16) & 0x00ff0000 ) | ( ( devFnNo << 8 ) & 0x0000ff00) ); address = ( address | 0x80000000 | (regOffset ) ); sysDisableBusError( ); retVal = (unsigned char)(hal_sysConfigInByte(address)); sysEnableBusError( ); return ( retVal ); } unsigned short ecosPciConfigInHalfWord ( int busNo, int devFnNo, int regOffset ){ unsigned int address; unsigned short retVal; address = ( ( (busNo << 16) & 0x00ff0000 ) | ( ( devFnNo << 8 ) & 0x0000ff00) ); address = ( address | 0x80000000 | (regOffset ) ); sysDisableBusError( ); retVal = (unsigned short)hal_sysConfigInHalfWord(address); sysEnableBusError( ); return retVal; } unsigned int ecosPciConfigInWord ( int busNo, int devFnNo, int regOffset ){ unsigned int address; unsigned int retVal; address = ( ( (busNo << 16) & 0x00ff0000 ) | ( ( devFnNo << 8 ) & 0x0000ff00) ); address = ( address | 0x80000000 | regOffset ); sysDisableBusError( ); retVal = hal_sysConfigInWord(address); sysEnableBusError( ); return retVal; } void displayLED(char *str, int count) { char *pChar = (char *)0xB4000000; char temp; /* clear */ temp = pChar[0x400]; if (count) pChar[0xf]= str[0]; else return; if (--count) pChar[0xb]= str[1]; else return; if (--count) pChar[0x7]= str[2]; else return; if (--count) pChar[0x3]= str[3]; else return; } /*------------------------------------------------------------------------*/ /* End of plf_misc.c */
Go to most recent revision | Compare with Previous | Blame | View Log