URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mips/] [tx39/] [v2_0/] [include/] [var_cache.h] - Rev 379
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef CYGONCE_IMP_CACHE_H #define CYGONCE_IMP_CACHE_H //============================================================================= // // imp_cache.h // // HAL cache control API // //============================================================================= //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //============================================================================= //#####DESCRIPTIONBEGIN#### // // Author(s): nickg // Contributors: nickg // Date: 1998-02-17 // Purpose: Cache control API // Description: The macros defined here provide the HAL APIs for handling // cache control operations. // Usage: // #include <cyg/hal/imp_cache.h> // ... // // //####DESCRIPTIONEND#### // //============================================================================= #include <pkgconf/hal.h> #include <cyg/infra/cyg_type.h> #include <cyg/hal/plf_cache.h> //============================================================================= // Toshiba TX3904 #ifdef CYGPKG_HAL_MIPS_TX3904 //----------------------------------------------------------------------------- // Cache dimensions // Data cache #define HAL_DCACHE_SIZE 1024 // Size of data cache in bytes #define HAL_DCACHE_LINE_SIZE 4 // Size of a data cache line #define HAL_DCACHE_WAYS 2 // Associativity of the cache // Instruction cache #define HAL_ICACHE_SIZE 4096 // Size of cache in bytes #define HAL_ICACHE_LINE_SIZE 16 // Size of a cache line #define HAL_ICACHE_WAYS 1 // Associativity of the cache #define HAL_DCACHE_SETS (HAL_DCACHE_SIZE/(HAL_DCACHE_LINE_SIZE*HAL_DCACHE_WAYS)) #define HAL_ICACHE_SETS (HAL_ICACHE_SIZE/(HAL_ICACHE_LINE_SIZE*HAL_ICACHE_WAYS)) //----------------------------------------------------------------------------- // Global control of data cache // Enable the data cache // This uses a bit in the config register, which is TX39 specific. #define HAL_DCACHE_ENABLE_DEFINED #define HAL_DCACHE_ENABLE() \ { \ asm volatile ("mfc0 $2,$3;" \ "ori $2,$2,0x0010;" \ "mtc0 $2,$3;" \ : \ : \ : "$2" \ ); \ \ } // Disable the data cache #define HAL_DCACHE_DISABLE_DEFINED #define HAL_DCACHE_DISABLE() \ { \ asm volatile ("mfc0 $2,$3;" \ "la $3,0xFFFFFFEF;" \ "and $2,$2,$3;" \ "mtc0 $2,$3;" \ : \ : \ : "$2", "$3" \ ); \ \ } // Invalidate the entire cache // The TX39 only has hit-invalidate on the DCACHE, not // index-invalidate, so we cannot just empty the cache out without // knowing what is in it. This is annoying. So, the best we can do is // fill the cache with data that is unlikely to be there // otherwise. Hence we read bytes from the ROM space since this is // most likely to be code, and will not get out of sync even if it is not. #define HAL_DCACHE_INVALIDATE_ALL_DEFINED #define HAL_DCACHE_INVALIDATE_ALL() \ { \ volatile CYG_BYTE *addr = (CYG_BYTE *)(0x9fc00000); \ volatile CYG_BYTE tmp = 0; \ int i; \ for( i = 0; i < (HAL_DCACHE_SIZE*2); i += HAL_DCACHE_LINE_SIZE ) \ { \ tmp = addr[i]; \ } \ } // Synchronize the contents of the cache with memory. #define HAL_DCACHE_SYNC_DEFINED #define HAL_DCACHE_SYNC() HAL_DCACHE_INVALIDATE_ALL() // Set the data cache refill burst size //#define HAL_DCACHE_BURST_SIZE(_size_) // Set the data cache write mode //#define HAL_DCACHE_WRITE_MODE( _mode_ ) //#define HAL_DCACHE_WRITETHRU_MODE 0 //#define HAL_DCACHE_WRITEBACK_MODE 1 // Load the contents of the given address range into the data cache // and then lock the cache so that it stays there. #define HAL_DCACHE_LOCK_DEFINED #define HAL_DCACHE_LOCK(_base_, _size_) \ { \ asm volatile ("mfc0 $2,$7;" \ "ori $2,$2,0x0100;" \ "mtc0 $2,$7;" \ : \ : \ : "$2" \ ); \ } // Undo a previous lock operation #define HAL_DCACHE_UNLOCK_DEFINED #define HAL_DCACHE_UNLOCK(_base_, _size_) \ { \ asm volatile ("mfc0 $2,$7;" \ "la $3,0xFFFFFEFF;" \ "and $2,$2,$3;" \ "mtc0 $2,$7;" \ : \ : \ : "$2", "$3" \ ); \ } // Unlock entire cache #define HAL_DCACHE_UNLOCK_ALL_DEFINED #define HAL_DCACHE_UNLOCK_ALL() HAL_DCACHE_UNLOCK(0,HAL_DCACHE_SIZE) //----------------------------------------------------------------------------- // Data cache line control // Allocate cache lines for the given address range without reading its // contents from memory. //#define HAL_DCACHE_ALLOCATE( _base_ , _size_ ) // Write dirty cache lines to memory and invalidate the cache entries // for the given address range. //#define HAL_DCACHE_FLUSH( _base_ , _size_ ) #define HAL_DCACHE_FLUSH_DEFINED // Ensure no default definition // Write dirty cache lines to memory for the given address range. //#define HAL_DCACHE_STORE( _base_ , _size_ ) #define HAL_DCACHE_STORE_DEFINED // Disable default definition //----------------------------------------------------------------------------- // Global control of Instruction cache // Enable the instruction cache // This uses a bit in the config register, which is TX39 specific. #define HAL_ICACHE_ENABLE_DEFINED #define HAL_ICACHE_ENABLE() \ { \ asm volatile ("mfc0 $2,$3;" \ "ori $2,$2,0x0020;" \ "mtc0 $2,$3;" \ : \ : \ : "$2" \ ); \ \ } // Disable the instruction cache #define HAL_ICACHE_DISABLE_DEFINED #define HAL_ICACHE_DISABLE() \ { \ asm volatile ("mfc0 $2,$3;" \ "la $3,0xFFFFFFDF;" \ "and $2,$2,$3;" \ "mtc0 $2,$3;" \ "j 1f;" \ "nop;" \ ".balign 16,0;" \ "1:;" \ : \ : \ : "$2", "$3" \ ); \ \ } // Load the contents of the given address range into the instruction cache // and then lock the cache so that it stays there. #define HAL_ICACHE_LOCK_DEFINED #define HAL_ICACHE_LOCK(_base_, _size_) \ { \ asm volatile ("mfc0 $2,$7;" \ "ori $2,$2,0x0200;" \ "mtc0 $2,$7;" \ : \ : \ : "$2" \ ); \ } // Undo a previous lock operation #define HAL_ICACHE_UNLOCK_DEFINED #define HAL_ICACHE_UNLOCK(_base_, _size_) \ { \ asm volatile ("mfc0 $2,$7;" \ "la $3,0xFFFFFDFF;" \ "and $2,$2,$3;" \ "mtc0 $2,$7;" \ : \ : \ : "$2", "$3" \ ); \ } // Unlock entire cache #define HAL_ICACHE_UNLOCK_ALL_DEFINED #define HAL_ICACHE_UNLOCK_ALL() HAL_ICACHE_UNLOCK(0, HAL_ICACHE_SIZE) //----------------------------------------------------------------------------- // Instruction cache line control // On the TX39, the instruction cache must be disabled to use the index-invalidate // cache operation. // Invalidate the entire cache // This uses the index-invalidate cache operation. #define HAL_ICACHE_INVALIDATE_ALL_DEFINED #define HAL_ICACHE_INVALIDATE_ALL() \ { \ register CYG_ADDRESS _baddr_ = 0x80000000; \ register CYG_ADDRESS _addr_ = 0x80000000; \ register CYG_WORD _state_; \ HAL_ICACHE_IS_ENABLED(_state_); \ HAL_ICACHE_DISABLE(); \ for( ; _addr_ < _baddr_+HAL_ICACHE_SIZE; _addr_ += HAL_ICACHE_LINE_SIZE ) \ { \ asm volatile ("cache 0x00,0(%0)" : : "r"(_addr_) ); \ } \ if( _state_ ) HAL_ICACHE_ENABLE(); \ } // Invalidate cache lines in the given range without writing to memory. // This uses the index-invalidate cache operation since the TX39 does not // have hit-invalidate on the instruction cache. #define HAL_ICACHE_INVALIDATE_DEFINED #define HAL_ICACHE_INVALIDATE( _base_ , _asize_ ) \ { \ register CYG_ADDRESS _addr_ = (CYG_ADDRESS)(_base_); \ register CYG_WORD _size_ = (_asize_); \ register CYG_WORD _state_; \ HAL_ICACHE_IS_ENABLED(_state_); \ HAL_ICACHE_DISABLE(); \ for( ; _addr_ <= _addr_+_size_; _addr_ += HAL_ICACHE_LINE_SIZE ) \ { \ asm volatile ("cache 0,0(%0)" : : "r"(_addr_) ); \ } \ if( _state_ ) HAL_ICACHE_ENABLE(); \ } #endif // CYGPKG_HAL_MIPS_TX3904 //----------------------------------------------------------------------------- #endif // ifndef CYGONCE_IMP_CACHE_H // End of imp_cache.h
Go to most recent revision | Compare with Previous | Blame | View Log