Subversion Repositories openrisc

#ifndef CYGONCE_HAL_IMP_INTR_H
#define CYGONCE_HAL_IMP_INTR_H
 
//==========================================================================
//
//      imp_intr.h
//
//      TX39 Interrupt and clock support
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    nickg
// Contributors: nickg, jskov,
//               gthomas, jlarmour
// Date:         1999-02-16
// Purpose:      TX39 Interrupt support
// Description:  The macros defined here provide the HAL APIs for handling
//               interrupts and the clock for variants of the TX39 MIPS
//               architecture.
//              
// Usage:
//              #include <cyg/hal/imp_intr.h>
//              ...
//              
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/hal.h>
 
#include <cyg/infra/cyg_type.h>
 
#include <cyg/hal/plf_intr.h>
 
//--------------------------------------------------------------------------
// Interrupt vectors.
 
#ifndef CYGHWR_HAL_INTERRUPT_VECTORS_DEFINED
 
// These are decoded via the IP bits of the cause
// register when an external interrupt is delivered.
 
#define CYGNUM_HAL_INTERRUPT_1                0
#define CYGNUM_HAL_INTERRUPT_2                1
#define CYGNUM_HAL_INTERRUPT_3                2
#define CYGNUM_HAL_INTERRUPT_4                3
#define CYGNUM_HAL_INTERRUPT_5                4
#define CYGNUM_HAL_INTERRUPT_6                5
#define CYGNUM_HAL_INTERRUPT_7                6
#define CYGNUM_HAL_INTERRUPT_DMAC1_CH3        7
#define CYGNUM_HAL_INTERRUPT_DMAC1_CH2        8
#define CYGNUM_HAL_INTERRUPT_DMAC0_CH1        9
#define CYGNUM_HAL_INTERRUPT_DMAC0_CH0        10
#define CYGNUM_HAL_INTERRUPT_SIO_0            11
#define CYGNUM_HAL_INTERRUPT_SIO_1            12
#define CYGNUM_HAL_INTERRUPT_TMR_0            13
#define CYGNUM_HAL_INTERRUPT_TMR_1            14
#define CYGNUM_HAL_INTERRUPT_TMR_2            15
#define CYGNUM_HAL_INTERRUPT_0                16
 
// Min/Max ISR numbers and how many there are
#define CYGNUM_HAL_ISR_MIN                     0
#define CYGNUM_HAL_ISR_MAX                     16
#define CYGNUM_HAL_ISR_COUNT                   17
 
// The vector used by the Real time clock
#define CYGNUM_HAL_INTERRUPT_RTC            CYGNUM_HAL_INTERRUPT_TMR_0
 
#define CYGHWR_HAL_INTERRUPT_VECTORS_DEFINED
 
#endif
 
//--------------------------------------------------------------------------
// Interrupt controller access.
 
#ifndef CYGHWR_HAL_INTERRUPT_CONTROLLER_ACCESS_DEFINED
 
#if defined(CYGPKG_HAL_MIPS_TX3904)
 
#define CYG_HAL_MIPS_TX3904_ILR0     0xFFFFC010
#define CYG_HAL_MIPS_TX3904_CConR    0xFFFFE000
 
// Array which stores the configured priority levels for the configured
// interrupts.
externC volatile CYG_BYTE hal_interrupt_level[CYGNUM_HAL_ISR_COUNT];
 
 
#define HAL_INTERRUPT_MASK( _vector_ )                       \
{                                                            \
    HAL_IO_REGISTER _reg_ = CYG_HAL_MIPS_TX3904_ILR0;        \
    CYG_WORD32 _ilr_;                                        \
    _reg_ += (_vector_)&0xC;                                 \
    HAL_READ_UINT32( _reg_, _ilr_ );                         \
    _ilr_ &= ~(7 << (((_vector_)&0x3)<<3));                  \
    HAL_WRITE_UINT32( _reg_, _ilr_ );                        \
}
 
#define HAL_INTERRUPT_UNMASK( _vector_ )                                \
{                                                                       \
    HAL_IO_REGISTER _reg_ = CYG_HAL_MIPS_TX3904_ILR0;                   \
    CYG_WORD32 _ilr_;                                                   \
    _reg_ += (_vector_)&0xC;                                            \
    HAL_READ_UINT32( _reg_, _ilr_ );                                    \
    _ilr_ |= hal_interrupt_level[_vector_] << (((_vector_)&0x3)<<3);    \
    HAL_WRITE_UINT32( _reg_, _ilr_ );                                   \
}
 
#define HAL_INTERRUPT_ACKNOWLEDGE( _vector_ )                           \
{                                                                       \
    if( _vector_ <= CYGNUM_HAL_INTERRUPT_7 ||                           \
        _vector_ == CYGNUM_HAL_INTERRUPT_0 )                            \
    {                                                                   \
        cyg_uint32 _v_ = _vector_ + 1;                                  \
        cyg_uint8 _reg_;                                                \
                                                                        \
        /* adjust vector to bit offset in CConR */                      \
        if( _v_ == CYGNUM_HAL_INTERRUPT_0 + 1 ) _v_ = 0;                \
                                                                        \
        /* get CConR */                                                 \
        HAL_READ_UINT8( CYG_HAL_MIPS_TX3904_CConR+1, _reg_ );           \
                                                                        \
        /* clear old value and set new */                               \
        _reg_ &= ~(7 << 5);                                             \
        _reg_ |= _v_ << 5;                                              \
        HAL_WRITE_UINT8( CYG_HAL_MIPS_TX3904_CConR+1, _reg_);           \
    }                                                                   \
}
 
#define HAL_INTERRUPT_CONFIGURE( _vector_, _level_, _up_ )              \
{                                                                       \
    if( _vector_ <= CYGNUM_HAL_INTERRUPT_7 ||                           \
        _vector_ == CYGNUM_HAL_INTERRUPT_0 )                            \
    {                                                                   \
        cyg_uint32 _v_ = _vector_ + 1;                                  \
        cyg_uint32 _val_ = 0;                                           \
        cyg_uint16 _reg_;                                               \
                                                                        \
        /* adjust vector to bit offset in CConR */                      \
        if( _v_ == CYGNUM_HAL_INTERRUPT_0 + 1 ) _v_ = 0;                \
        _v_ <<= 1;                                                      \
                                                                        \
        /* set bits according to requirements */                        \
        if( _up_ ) _val_ |= 1;                                          \
        if( !(_level_) ) _val_ |= 2;                                    \
                                                                        \
        /* get CConR */                                                 \
        HAL_READ_UINT16( CYG_HAL_MIPS_TX3904_CConR+2, _reg_ );          \
                                                                        \
        /* clear old value and set new */                               \
        _reg_ &= ~(3 << _v_);                                           \
        _reg_ |= _val_ << _v_;                                          \
        HAL_WRITE_UINT16( CYG_HAL_MIPS_TX3904_CConR+2, _reg_ );         \
    }                                                                   \
}
 
#define HAL_INTERRUPT_SET_LEVEL( _vector_, _level_ )    \
{                                                       \
    HAL_IO_REGISTER _reg_ = CYG_HAL_MIPS_TX3904_ILR0;   \
    CYG_WORD32 _ilr_;                                   \
    _reg_ += (_vector_)&0xC;                            \
    HAL_READ_UINT32( _reg_, _ilr_ );                    \
    _ilr_ |= (_level_) << (((_vector_)&0x3)<<3);        \
    HAL_WRITE_UINT32( _reg_, _ilr_ );                   \
    hal_interrupt_level[_vector_] = _level_;            \
}
 
#define CYGHWR_HAL_INTERRUPT_CONTROLLER_ACCESS_DEFINED
 
#else
 
#error Unspecified TX39 variant
 
#endif
 
#endif
 
//--------------------------------------------------------------------------
// Clock control
 
#ifndef CYGHWR_HAL_CLOCK_CONTROL_DEFINED
 
#if defined(CYGPKG_HAL_MIPS_TX3904)
 
#define CYG_HAL_MIPS_TX3904_TIMER_BASE 0xFFFFF000
#define CYG_HAL_MIPS_TX3904_TIMER_CR  (CYG_HAL_MIPS_TX3904_TIMER_BASE + 0x00)
#define CYG_HAL_MIPS_TX3904_TIMER_SR  (CYG_HAL_MIPS_TX3904_TIMER_BASE + 0x04)
#define CYG_HAL_MIPS_TX3904_TIMER_CPR (CYG_HAL_MIPS_TX3904_TIMER_BASE + 0x08)
#define CYG_HAL_MIPS_TX3904_TIMER_IMR (CYG_HAL_MIPS_TX3904_TIMER_BASE + 0x10)
#define CYG_HAL_MIPS_TX3904_TIMER_DR  (CYG_HAL_MIPS_TX3904_TIMER_BASE + 0x20)
#define CYG_HAL_MIPS_TX3904_TIMER_RR  (CYG_HAL_MIPS_TX3904_TIMER_BASE + 0xF0)
 
#define HAL_CLOCK_INITIALIZE( _period_ )                             \
{                                                                    \
    HAL_WRITE_UINT32( CYG_HAL_MIPS_TX3904_TIMER_DR, 0x00000003 );    \
    HAL_WRITE_UINT32( CYG_HAL_MIPS_TX3904_TIMER_CPR, _period_ );     \
    HAL_WRITE_UINT32( CYG_HAL_MIPS_TX3904_TIMER_SR, 0x00000000 );    \
    HAL_WRITE_UINT32( CYG_HAL_MIPS_TX3904_TIMER_IMR, 0x00008001 );   \
    HAL_WRITE_UINT32( CYG_HAL_MIPS_TX3904_TIMER_CR, 0x000000C0 );    \
}
 
#define HAL_CLOCK_RESET( _vector_, _period_ )                        \
{                                                                    \
    HAL_WRITE_UINT32( CYG_HAL_MIPS_TX3904_TIMER_SR, 0x00000000 );    \
}
 
#if defined(CYGHWR_HAL_MIPS_TX3904_TRR_REQUIRES_SYNC) && \
    !defined(CYGPKG_HAL_MIPS_SIM)
 
// We need to sync and check the coprocessor 0 condition - this
// indicates whether data is present in the write buffer. We need to
// wait until the data to be written is flushed out. This works
// around a tx39 bug.  gcc will insert a NOP after the asm insns.
 
# define HAL_CLOCK_READ( _pvalue_ )                                     \
CYG_MACRO_START                                                         \
    asm volatile (                                                      \
        "sync; nop; 1: ; bc0f 1b"                                       \
        :                                                               \
        :                                                               \
        : "$0"                                                          \
        );                                                              \
     HAL_READ_UINT32( CYG_HAL_MIPS_TX3904_TIMER_RR, *(_pvalue_) );      \
CYG_MACRO_END
 
#else
 
# define HAL_CLOCK_READ( _pvalue_ )                                     \
CYG_MACRO_START                                                         \
    HAL_READ_UINT32( CYG_HAL_MIPS_TX3904_TIMER_RR, *(_pvalue_) );       \
CYG_MACRO_END
 
#endif
 
#if defined(CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY) && \
    !defined(HAL_CLOCK_LATENCY)
#define HAL_CLOCK_LATENCY( _pvalue_ ) HAL_CLOCK_READ(_pvalue_)
#endif
 
#define CYGHWR_HAL_CLOCK_CONTROL_DEFINED
 
#else
 
#error Unspecified TX39 variant
 
#endif
 
#endif
 
//--------------------------------------------------------------------------
// Timeout exception support. This is TX39 specific.
 
#if defined(CYGPKG_HAL_MIPS_TX3904)
 
#define HAL_TX39_DEBUG_TOE_ENABLE()                     \
{                                                       \
    HAL_IO_REGISTER _reg_ = CYG_HAL_MIPS_TX3904_CConR;  \
    CYG_WORD32 _cconr_;                                 \
    HAL_READ_UINT32( _reg_, _cconr_);                   \
    _cconr_ |= 0x04000000;                              \
    HAL_WRITE_UINT32( _reg_, _cconr_);                  \
}
 
#define HAL_TX39_DEBUG_TOE_DISABLE()                    \
{                                                       \
    HAL_IO_REGISTER _reg_ = CYG_HAL_MIPS_TX3904_CConR;  \
    CYG_WORD32 _cconr_;                                 \
    HAL_READ_UINT32( _reg_, _cconr_);                   \
    _cconr_ &= 0xFBFFFFFF;                              \
    HAL_WRITE_UINT32( _reg_, _cconr_);                  \
}
 
#else
 
#define HAL_TX39_DEBUG_TOE_ENABLE()
 
#define HAL_TX39_DEBUG_TOE_DISABLE()
 
#endif
 
 
//--------------------------------------------------------------------------
#endif // ifndef CYGONCE_HAL_IMP_INTR_H
// End of imp_intr.h