URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mips/] [vrc4373/] [v2_0/] [ChangeLog] - Rev 211
Go to most recent revision | Compare with Previous | Blame | View Log
2001-10-01 Jonathan Larmour <jlarmour@redhat.com>
* cdl/hal_mips_vr4300_vrc4373.cdl: Define CPU as big-endian here.
2001-09-07 Nick Garnett <nickg@redhat.com>
* cdl/hal_mips_vr4300_vrc4373.cdl: Brought up to date and much of
the configury now moved to the VRC437X package. Configury for
Redboot and virtual vectors added here.
* misc/redboot_RAM.ecm:
* misc/redboot_ROM.ecm:
* misc/redboot_ROMRAM.ecm:
These files added to configure redboot for this target.
* include/hal_diag.h:
* include/platform.inc:
* include/plf_cache.h:
* include/plf_intr.h:
* include/plf_io.h:
* include/plf_stub.h:
* include/plf_z8530.h:
* misc/stubrom.perm:
* src/hal_diag.c:
* src/platform.S:
* src/plf_misc.c:
* src/plf_stub.c:
* src/pmon.S:
Files removed and relocated to VRC437X package. This package is
now just a configuration and memory layout package. This ChangeLog
is being retained in it original form for archival purposes.
2001-02-26 Jonathan Larmour <jlarmour@redhat.com>
* include/platform.inc: Always do unsigned arithmetic on addresses
* src/platform.S: Ditto
Reported by Chris Morrow <cmorrow@YottaYotta.com>
2001-02-05 Jesper Skov <jskov@redhat.com>
* include/plf_io.h: Ignore devices not on bus 0.
2001-01-31 Nick Garnett <nickg@cygnus.co.uk>
* src/platform.S: Added *va* (see mips/arch/.../arch.inc) macros
when manipulating values that are potentially 64 bits.
2001-01-26 Jesper Skov <jskov@redhat.com>
* include/plf_stub.h: Reset macros moved
* include/plf_intr.h: to this file.
2000-10-20 Jonathan Larmour <jlarmour@redhat.com>
* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.mlt:
* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.mlt:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt:
Add heap1 section
* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.h:
* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.h:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h:
* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
Regenerated
2000-09-15 Nick Garnett <nickg@cygnus.co.uk>
* include/platform.inc: Added some extra ifdefs and code to try
and get ROM startup working.
* cdl/hal_mips_vr4300_vrc4373.cdl:
Building GDB stubs was requiring ROM startup when it should have
ROMRAM startup.
2000-08-31 Jonathan Larmour <jlarmour@redhat.com>
* src/platform.S (hal_pci_config_read): Prevent assembler reordering,
the address is important
2000-08-16 Nick Garnett <nickg@cygnus.co.uk>
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h:
Fixed typo in last change. Forgot that the RAM base address
appears twice in these files. Also fixed .h file to match.
2000-08-15 Nick Garnett <nickg@cygnus.co.uk>
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
RAM start on these configurations should be 0x80000000 not
0x80100000.
2000-05-22 Jesper Skov <jskov@redhat.com>
* src/hal_diag.c: Removed CTRLC init hacks.
* src/plf_misc.c (hal_ctrlc_isr_init): Made public.
2000-05-17 Jesper Skov <jskov@redhat.com>
* src/plf_misc.c: Let arch call ctrlc_init.
2000-02-18 Jonathan Larmour <jlarmour@redhat.co.uk>
* cdl/hal_mips_vr4300_vrc4373.cdl (CYGBLD_BUILD_GDB_STUBS): When
building stubs, define every dependency required here rather than
in the template
2000-02-10 Jesper Skov <jskov@redhat.com>
* include/plf_stub.h:
Removed HAL_STUB_PLATFORM_STUBS_INIT.
* include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed stubs as a
legal startup type.
2000-02-07 Jesper Skov <jskov@redhat.com>
* cdl/hal_mips_vr4300_vrc4373.cdl: use cpu options when linking.
2000-02-03 Jesper Skov <jskov@redhat.com>
* cdl/hal_mips_vr4300_vrc4373.cdl: Implements stubs.
2000-01-27 Jesper Skov <jskov@redhat.com>
* cdl/hal_mips_vr4300_vrc4373.cdl: Moved part of stubs build rule to
common HAL. Changed description.
2000-01-24 Jesper Skov <jskov@cygnus.co.uk>
* cdl/hal_mips_vr4300_vrc4373.cdl: Add stubs build rule.
2000-01-24 John Dallaway <jld@cygnus.co.uk>
* cdl/*.cdl:
Remove obsolete option CYGTST_TESTING_IDENTIFIER.
2000-01-19 Hugo Tyson <hmt@cygnus.co.uk>
* cdl/*.cdl: Add descriptions to a number of options &c which were
lacking same, also tidied up other typos as noticed en passant.
1999-12-21 Jonathan Larmour <jlarmour@cygnus.co.uk>
* misc/stubrom.perm: Rename CYG_HAL_ROM_MONITOR ->
CYGSEM_HAL_ROM_MONITOR
* include/platform.inc: Rename CYG_HAL_USE_ROM_MONITOR_PMON ->
CYGSEM_HAL_USE_ROM_MONITOR_PMON throughout
Rename CYG_HAL_USE_ROM_MONITOR_GDB_STUBS ->
CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs throughout
* src/hal_diag.c: Likewise
* src/plf_misc.c: Likewise. Similarly CYG_HAL_USE_ROM_MONITOR_CYGMON
-> CYGSEM_HAL_USE_ROM_MONITOR_CygMon
* cdl/hal_mips_vr4300_vrc4373.cdl: Add new platform-specific
CYGSEM_HAL_USE_ROM_MONITOR and CYGSEM_HAL_ROM_MONITOR options to
control ROM monitor support
1999-12-20 Gary Thomas <gthomas@cygnus.co.uk>
* cdl/hal_mips_vr4300_vrc4373.cdl: Add -Wl for linker options.
1999-11-25 Jonathan Larmour <jlarmour@cygnus.co.uk>
* include/pkgconf/hal_mips_vr4300_vrc4373.h:
Reparent under HAL MIPS variants as for other MIPS targets
1999-11-25 John Dallaway <jld@cygnus.co.uk>
* cdl/hal_mips_vr4300_vrc4373.cdl:
Remove references to obsolete 'STUBS' memory layout.
1999-11-25 Gary Thomas <gthomas@cygnus.co.uk>
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h: New file.
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: Real file.
* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.h:
* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.h: New file(s).
1999-11-02 Jesper Skov <jskov@cygnus.co.uk>
* cdl/hal_mips_vr4300_vrc4373.cdl: Added.
1999-10-29 Nick Garnett <nickg@cygnus.co.uk>
* include/plf_intr.h:
* src/plf_misc.c:
* src/hal_diag.c:
Changed CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT to
CYGDBG_HAL_MIPS_DEBUG_GDB_CTRLC_SUPPORT.
1999-10-05 Nick Garnett <nickg@cygnus.co.uk>
* src/platform.S: Swapped around the IOPROF registers for
big-endian mode. These 16 bit registers end up in opposite halves
of the 32 bit word in big endian mode.
* include/plf_z8530.h: In big-endian mode the Z8530 registers are
at the other end of the word. This is easily fixed by redefining
the DUART_BASE only.
1999-09-14 Jonathan Larmour <jlarmour@cygnus.co.uk>
* src/hal_diag.c (hal_diag_write_char): Ack VRC4373 interrupt to
prevent spurious interrupts
* include/pkgconf/hal_mips_vr4300_vrc4373.h:
Add new CYGSEM_HAL_MIPS_VR4300_VRC4373_DIAG_ACKS_INT_0 option to
control the above behaviour
1999-09-08 Jonathan Larmour <jlarmour@cygnus.co.uk>
* include/plf_intr.h (HAL_INTERRUPT_UNMASK): Rephrase to silence warnings
about left-shifting negative numbers. Equivalent when optimized.
(HAL_INTERRUPT_ACKNOWLEDGE): Likewise
(HAL_INTERRUPT_MASK): Likewise
1999-09-09 Nick Garnett <nickg@cygnus.co.uk>
* include/platform.inc: Changed end address for copy from
__bss_end to __ram_data_end.
1999-09-08 Jonathan Larmour <jlarmour@cygnus.co.uk>
* src/platform.S (NTLBENTRIES): Fix typo: 0x32 -> 32
* include/platform.inc (hal_mon_copy_trampoline): Use branch delay slot
when copying - both for ROMRAM startup and CYG_HAL_USE_ROM_MONITOR_PMON
(hal_mon_init_vsr_table): Don't init debug vector - not used on
vr4300 CPUs
1999-09-02 Nick Garnett <nickg@cygnus.co.uk>
* include/platform.inc: Added code to monitor setup to copy
other_vector in to correct RAM location.
1999-08-19 Nick Garnett <nickg@cygnus.co.uk>
* include/plf_io.h: Added this file to contain PCI access support.
* include/platform.inc:
* src/platform.S:
Added function to read data from the PCI data register together
with a data load/store VSR which catches any exceptions and fixes
them up so that the program can continue.
1999-07-15 Jonathan Larmour <jlarmour@cygnus.co.uk>
* src/hal_diag.c: Add prototypes for cyg_hal_is_break and
cyg_hal_user_break to silence warning
1999-06-21 Nick Garnett <nickg@cygnus.co.uk>
* src/plf_misc.c (hal_ctrlc_isr): Changed all return codes to 2 so
that the interrupt is reported as handled.
1999-06-17 Nick Garnett <nickg@cygnus.co.uk>
* include/platform.inc: Added code to initialize VSR slots for
debug, utlb and nmi vectors.
* misc/stubrom.perm: Added disable of
CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT when building ROM monitor.
1999-06-10 Jesper Skov <jskov@cygnus.co.uk>
* src/plf_stub.c (hal_plf_stub_init): Fix config problem.
1999-06-10 Nick Garnett <nickg@cygnus.co.uk>
* src/plf_stub.c: Added interrupt acknowledge calls to character
IO routines to prevent spurious interrupts.
1999-06-08 Nick Garnett <nickg@cygnus.co.uk>
* src/hal_diag.c: Ensure that reads and writes do not provoke
spurious interrupts.
* include/platform.inc: Tidied up debug version of
hal_diag_intr_start a little.
1999-05-28 Nick Garnett <nickg@cygnus.co.uk>
* misc/stubrom.perm: Added this file to contain a permutation for
building a stub ROM for the VRC4373 board.
* include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed redfinitions
triggered by CYG_HAL_STARTUP_STUBS.
* include/plf_stub.h: Added HAL_STUB_PLATFORM_INIT and voided
HAL_STUB_PLATFORM_INIT_BREAK_IRQ and HAL_STUB_PLATFORM_STUBS_INIT.
* src/plf_stub.c:
Moved all setup into hal_plf_stub_init(). Deleted
hal_plf_init_break_irq().
1999-05-27 Nick Garnett <nickg@cygnus.co.uk>
* src/plf_stub.c:
Moved Z8530 definitions out to plf_z8530.h.
Added setup of install_async_breakpoint() function is vector
table.
* src/platform.S: Some minor tidies to the code.
* src/hal_diag.c:
Moved Z8530 definitions out to plf_z8530.h.
Added modifications for Control-C support - mostly removing some
defunct code.
* include/plf_z8530.h
Added this file to contain definitions and access macros to the
Z8530 DUART for use in the HAL.
* include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed some
unnecessary defines.
* include/plf_intr.h:
* src/plf_misc.c:
Added Control-C support.
* include/platform.inc: Some minor changes to diagnostic macros.
1999-05-21 Nick Garnett <nickg@cygnus.co.uk>
* src/plf_stub.c (hal_plf_init_serial): Tidied away some unused
code.
* src/platform.S:
Made use of ROMRAM startup option where relevant.
Modified code to be position independent since under ROMRAM
startup it is linked to run in RAM but must actually run in ROM
prior to the copy.
Added some delay loops to try and get the hardware to settle on
startup. Without these the machine sometimes wedges after
power-on.
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt:
* include/pkgconf/mlt_mips_vr4300_vrc4373_stubs.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_stubs.mlt:
Added these files to support the new startup types.
Note: at present the .mlt files do not match the .ldi files.
* include/pkgconf/hal_mips_vr4300_vrc4373.h:
Added ROMRAM and STUBS startup options to CDL. Moved default ports
for DIAG and GDB to 0 at 38400 baud.
Added an ifdef to modify the configuration for STUBS startup.
* include/plf_stub.h: Removed spurious include.
* include/platform.inc:
Added version of INITIAL_SR for use with GDB stubs.
Added implementation of "lar" macro and converted the relevant
instances of "la" to use it.
Made use of ROMRAM startup option where relevant.
Implemented copy of ROM image to RAM and transfer of control to
it.
Tidied up trampoline copy and VSR table init in monitor init
macros.
Added code to generate messages to the GrammerEngine PromIce AI
interface during initialization.
1999-05-20 Gary Thomas <gthomas@cygnus.co.uk>
* include/pkgconf/hal_mips_vr4300_vrc4373.h: Move RTC setup here.
1999-05-13 Nick Garnett <nickg@cygnus.co.uk>
Imported whole directory tree into main trunk of repository.
1999-05-11 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi:
Moved RAM and ROM back to their correct addresses.
* include/pkgconf/hal_vr4300_vrc4373.h:
* include/pkgconf/hal_mips_vr4300_vrc4373.h:
Renamed hal_vr4300_vrc4373.h to match file name synthesized by
pkgconf.tcl.
* src/hal_diag.c:
* src/plf_stub.c:
Removed explicit include of vrc4372 pkgconf file.
1999-05-06 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/pkgconf/hal_vr4300_vrc4373.h: Switched initial DIAG and
GDB baud rates to 38400.
* include/plf_stub.h:
* src/plf_stub.c:
Added hal_plf_stub_init() to initialize the virtual vector table
for thread-aware debugging.
1999-05-05 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/platform.inc: Added code to plant interrupt VSR in table
when using PMON.
1999-04-29 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.ldi:
* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.mlt:
Load address moved to 0x80100000, which is the cacheable area (kseg0).
* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi: For testing
purposes ROM loaded code is put at 0x80680000 and its working RAM
at 0x80600800. These will be moved back to the real addresses when
we can build real ROMs.
The corresponding .mlt file has NOT been changed.
* src/plf_stub.c (hal_plf_init_serial): Re-enabled initialization
of serial port.
Temporarily made calls to PMON close function unconditional.
* src/plf_misc.c (hal_platform_init): Added call to
patch_dbg_syscalls().
* src/platform.S: Lots of code, tables and definitions added to
initialize the MMU and memory/bus controllers.
* src/hal_diag.c: Added support for GDB protocol messages.
* include/platform.inc: Added hal_mmu_init and hal_memc_init
macros. Added code to initialize the VSR table in various
configurations.
1999-04-26 Gary Thomas <gthomas@cygnus.co.uk>
[VR4300 branch]
* include/pkgconf/hal_vr4300_vrc4373.h: Default diagnostics on port B.
* src/hal_diag.c (hal_diag_init): Port initialization was incorrect.
1999-04-23 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/platform.inc: Added some extra vsr table redirects for
most other exceptions while we are running under PMON.
1999-04-22 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/plf_stub.h:
* src/plf_stub.c:
* src/PKGconf.mak (COMPILE):
Files added to start work on GDB stub support.
1999-04-22 Gary Thomas <gthomas@cygnus.co.uk>
[VR4300 branch]
* src/hal_diag.c:
* include/pkgconf/hal_vr4300_vrc4373.h: Add diag/gdb serial
port configury.
1999-04-22 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* include/platform.inc: Modified hal_intc_init to always enable
IPL0..2 bits in CP0 status register.
1999-04-21 Nick Garnett <nickg@cygnus.co.uk>
[VR4300 branch]
* src/plf_misc.c: Added this file to contain hal_platform_init().
* src/pmon.S: Renamed pmon entry functions to avoid clashes with
the C library. Removed unused code.
* src/platform.S: Added this file. It contains an ISR springboard
routine to decode interrupts via the vrc4372, a breakpoint
springboard to allow breakpoints to continue being handled by
PMON, and board specific versions of the ISR tables.
[later] Fixed a bug in the ISR springboard, added a few comments
too.
* src/hal_diag.c: Implemented direct-to-hardware diagnostic
output.
* src/PKGconf.mak (COMPILE): Added platform.S.
Added plf_misc.c.
* include/plf_intr.h: Added extensive support for vr4372 interrupt
controller.
* include/platform.inc: Added an initial status register value to
avoid upsetting PMON. Added plant of hal_breakpoint_springboard in
VSR table. Added some diagnostic code to wiggle a led.
Added an implementation of hal_intc_init. Changed initial status
register value. Moved VRC4372 register definitions here.
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log