Subversion Repositories openrisc_me

2002-08-06  Gary Thomas  <gary@chez-thomas.org>
2002-08-06  Motoya Kurotsu <kurotsu@allied-telesis.co.jp>       

        * src/plf_serial.c: I/O channel data can't be constant - contains
        timeout information which can be changed.

2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_mips_vr4300_vrc437x.cdl: Indicate support of variable baud
        rates.

2001-10-30  Nick Garnett  <nickg@redhat.com>

        * include/platform.inc:
        Added local version of hal_intc_decode to make chaining work
        correctly.
        
        * include/plf_intr.h:
        Added local version of HAL_TRANSLATE_VECTOR() to make chaining
        work correctly.

2001-10-24  Nick Garnett  <nickg@redhat.com>

        * include/hal_diag.h: Fixed problem with support for virtual
        vector diagnostics.

        * include/platform.inc:
        Modify the ROM and ROMRAM version of hal_mon_copy_trampoline to
        copy the utlb trampoline to 0xa0000080 as well as 0xa0000000. This
        is necessary on 64 bit machines to catch 64 bit TLB exceptions.

2001-09-17  Nick Garnett  <nickg@redhat.com>

        * src/plf_misc.c:
        Added ISR for dealing with spurious interrupts from the VRC437X.
        Added PCI initialization routine.

        * src/platform.S: Change PCI IO base address setup to a more
        explicit value.

        * include/plf_io.h: Adjust PCI IO and memory base addresses to
        match the actual hardware setup.
        Add explicit PCI initialization routine.

        * include/platform.inc: Install bus error VSR in non-stub
        configurations too.

2001-09-07  Nick Garnett  <nickg@redhat.com>

        This package is newly created to contain code that is common to
        all VRC437X platforms. Most of the contents is derived from the
        original VRC4373 package. All ChangeLog entries other than this
        one were made when the files were in that package.  This ChangeLog
        entry describes any major changes that have occured to the files
        during the move.

        * include/platform.inc:
        Converted INITIAL_SR to INITIAL_SR_PLF to work with architecture
        and variant HALs.

        * src/platform.S: Added VRC4375 setup.
        
        * src/plf_serial.c: File added to implement serial IO in a vector
        compatible manner.
                
        * cdl/hal_mips_vr4300_vrc437x.cdl: Generic configuration for all
        targets added. Platform specific configuration moved out to
        specific packages.
        
        * include/hal_diag.h:
        * include/plf_cache.h:
        * include/plf_intr.h:
        * include/plf_io.h:
        * include/plf_stub.h:
        * include/plf_z8530.h:
        * misc/stubrom.perm:
        * src/hal_diag.c:
        * src/plf_misc.c:
        * src/plf_stub.c:
        * src/pmon.S:
        Files move with minor changes only from original VRC4373 package.
        

2001-02-26  Jonathan Larmour  <jlarmour@redhat.com>

        * include/platform.inc: Always do unsigned arithmetic on addresses
        * src/platform.S: Ditto
        Reported by Chris Morrow <cmorrow@YottaYotta.com>

2001-02-05  Jesper Skov  <jskov@redhat.com>

        * include/plf_io.h: Ignore devices not on bus 0.

2001-01-31  Nick Garnett  <nickg@cygnus.co.uk>

        * src/platform.S: Added *va* (see mips/arch/.../arch.inc) macros
        when manipulating values that are potentially 64 bits.

2001-01-26  Jesper Skov  <jskov@redhat.com>

        * include/plf_stub.h: Reset macros moved
        * include/plf_intr.h: to this file.

2000-10-20  Jonathan Larmour  <jlarmour@redhat.com>

        * include/pkgconf/mlt_mips_vr4300_vrc4373_ram.mlt:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_rom.mlt:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt:
        Add heap1 section

        * include/pkgconf/mlt_mips_vr4300_vrc4373_ram.h:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_rom.h:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_ram.ldi:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
        Regenerated

2000-09-15  Nick Garnett  <nickg@cygnus.co.uk>

        * include/platform.inc: Added some extra ifdefs and code to try
        and get ROM startup working.

        * cdl/hal_mips_vr4300_vrc4373.cdl:
        Building GDB stubs was requiring ROM startup when it should have
        ROMRAM startup.

2000-08-31  Jonathan Larmour  <jlarmour@redhat.com>

        * src/platform.S (hal_pci_config_read): Prevent assembler reordering,
        the address is important

2000-08-16  Nick Garnett  <nickg@cygnus.co.uk>

        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h: 
        Fixed typo in last change. Forgot that the RAM base address
        appears twice in these files. Also fixed .h file to match.
        
2000-08-15  Nick Garnett  <nickg@cygnus.co.uk>

        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
        RAM start on these configurations should be 0x80000000 not
        0x80100000.

2000-05-22  Jesper Skov  <jskov@redhat.com>

        * src/hal_diag.c: Removed CTRLC init hacks.

        * src/plf_misc.c (hal_ctrlc_isr_init): Made public.

2000-05-17  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: Let arch call ctrlc_init.

2000-02-18  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * cdl/hal_mips_vr4300_vrc4373.cdl (CYGBLD_BUILD_GDB_STUBS): When
        building stubs, define every dependency required here rather than
        in the template

2000-02-10  Jesper Skov  <jskov@redhat.com>

        * include/plf_stub.h: 
        Removed HAL_STUB_PLATFORM_STUBS_INIT.

        * include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed stubs as a
        legal startup type.

2000-02-07  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_mips_vr4300_vrc4373.cdl: use cpu options when linking.

2000-02-03  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_mips_vr4300_vrc4373.cdl: Implements stubs.

2000-01-27  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_mips_vr4300_vrc4373.cdl: Moved part of stubs build rule to
        common HAL. Changed description.

2000-01-24  Jesper Skov  <jskov@cygnus.co.uk>

        * cdl/hal_mips_vr4300_vrc4373.cdl: Add stubs build rule.

2000-01-24  John Dallaway  <jld@cygnus.co.uk>

        * cdl/*.cdl:

        Remove obsolete option CYGTST_TESTING_IDENTIFIER.

2000-01-19  Hugo Tyson  <hmt@cygnus.co.uk>

        * cdl/*.cdl: Add descriptions to a number of options &c which were
        lacking same, also tidied up other typos as noticed en passant.

1999-12-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * misc/stubrom.perm: Rename CYG_HAL_ROM_MONITOR ->
        CYGSEM_HAL_ROM_MONITOR

        * include/platform.inc: Rename CYG_HAL_USE_ROM_MONITOR_PMON ->
        CYGSEM_HAL_USE_ROM_MONITOR_PMON throughout
        Rename CYG_HAL_USE_ROM_MONITOR_GDB_STUBS ->
        CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs throughout

        * src/hal_diag.c: Likewise

        * src/plf_misc.c: Likewise. Similarly CYG_HAL_USE_ROM_MONITOR_CYGMON
        -> CYGSEM_HAL_USE_ROM_MONITOR_CygMon

        * cdl/hal_mips_vr4300_vrc4373.cdl: Add new platform-specific
        CYGSEM_HAL_USE_ROM_MONITOR and CYGSEM_HAL_ROM_MONITOR options to
        control ROM monitor support

1999-12-20  Gary Thomas  <gthomas@cygnus.co.uk>

        * cdl/hal_mips_vr4300_vrc4373.cdl: Add -Wl for linker options.

1999-11-25  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/pkgconf/hal_mips_vr4300_vrc4373.h: 
        Reparent under HAL MIPS variants as for other MIPS targets

1999-11-25  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_mips_vr4300_vrc4373.cdl:

        Remove references to obsolete 'STUBS' memory layout.

1999-11-25  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h: New file.

        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: Real file.

        * include/pkgconf/mlt_mips_vr4300_vrc4373_rom.h: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_ram.h: New file(s).

1999-11-02  Jesper Skov  <jskov@cygnus.co.uk>

        * cdl/hal_mips_vr4300_vrc4373.cdl: Added.

1999-10-29  Nick Garnett  <nickg@cygnus.co.uk>

        * include/plf_intr.h: 
        * src/plf_misc.c: 
        * src/hal_diag.c:
        Changed CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT to
        CYGDBG_HAL_MIPS_DEBUG_GDB_CTRLC_SUPPORT.

1999-10-05  Nick Garnett  <nickg@cygnus.co.uk>

        * src/platform.S: Swapped around the IOPROF registers for
        big-endian mode. These 16 bit registers end up in opposite halves
        of the 32 bit word in big endian mode.

        * include/plf_z8530.h: In big-endian mode the Z8530 registers are
        at the other end of the word. This is easily fixed by redefining
        the DUART_BASE only.

1999-09-14  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/hal_diag.c (hal_diag_write_char): Ack VRC4373 interrupt to
        prevent spurious interrupts
        * include/pkgconf/hal_mips_vr4300_vrc4373.h: 
        Add new CYGSEM_HAL_MIPS_VR4300_VRC4373_DIAG_ACKS_INT_0 option to
        control the above behaviour

1999-09-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/plf_intr.h (HAL_INTERRUPT_UNMASK): Rephrase to silence warnings
        about left-shifting negative numbers. Equivalent when optimized.
        (HAL_INTERRUPT_ACKNOWLEDGE): Likewise
        (HAL_INTERRUPT_MASK): Likewise

1999-09-09  Nick Garnett  <nickg@cygnus.co.uk>

        * include/platform.inc: Changed end address for copy from
        __bss_end to __ram_data_end.

1999-09-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/platform.S (NTLBENTRIES): Fix typo: 0x32 -> 32

        * include/platform.inc (hal_mon_copy_trampoline): Use branch delay slot
        when copying - both for ROMRAM startup and CYG_HAL_USE_ROM_MONITOR_PMON
        (hal_mon_init_vsr_table): Don't init debug vector - not used on
        vr4300 CPUs

1999-09-02  Nick Garnett  <nickg@cygnus.co.uk>

        * include/platform.inc: Added code to monitor setup to copy
        other_vector in to correct RAM location.

1999-08-19  Nick Garnett  <nickg@cygnus.co.uk>

        * include/plf_io.h: Added this file to contain PCI access support.

        * include/platform.inc:
        * src/platform.S: 
        Added function to read data from the PCI data register together
        with a data load/store VSR which catches any exceptions and fixes
        them up so that the program can continue.

1999-07-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/hal_diag.c: Add prototypes for cyg_hal_is_break and
        cyg_hal_user_break to silence warning

1999-06-21  Nick Garnett  <nickg@cygnus.co.uk>

        * src/plf_misc.c (hal_ctrlc_isr): Changed all return codes to 2 so
        that the interrupt is reported as handled.

1999-06-17  Nick Garnett  <nickg@cygnus.co.uk>

        * include/platform.inc: Added code to initialize VSR slots for
        debug, utlb and nmi vectors.

        * misc/stubrom.perm: Added disable of
        CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT when building ROM monitor.

1999-06-10  Jesper Skov  <jskov@cygnus.co.uk>

        * src/plf_stub.c (hal_plf_stub_init): Fix config problem.

1999-06-10  Nick Garnett  <nickg@cygnus.co.uk>

        * src/plf_stub.c: Added interrupt acknowledge calls to character
        IO routines to prevent spurious interrupts.

1999-06-08  Nick Garnett  <nickg@cygnus.co.uk>

        * src/hal_diag.c: Ensure that reads and writes do not provoke
        spurious interrupts.

        * include/platform.inc: Tidied up debug version of
        hal_diag_intr_start a little.

1999-05-28  Nick Garnett  <nickg@cygnus.co.uk>

        * misc/stubrom.perm: Added this file to contain a permutation for
        building a stub ROM for the VRC4373 board.

        * include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed redfinitions
        triggered by CYG_HAL_STARTUP_STUBS.

        * include/plf_stub.h: Added HAL_STUB_PLATFORM_INIT and voided
        HAL_STUB_PLATFORM_INIT_BREAK_IRQ and HAL_STUB_PLATFORM_STUBS_INIT.

        * src/plf_stub.c: 
        Moved all setup into hal_plf_stub_init(). Deleted
        hal_plf_init_break_irq().
        
1999-05-27  Nick Garnett  <nickg@cygnus.co.uk>

        * src/plf_stub.c: 
        Moved Z8530 definitions out to plf_z8530.h.
        Added setup of install_async_breakpoint() function is vector
        table.
        
        * src/platform.S: Some minor tidies to the code.

        * src/hal_diag.c:
        Moved Z8530 definitions out to plf_z8530.h.
        Added modifications for Control-C support - mostly removing some
        defunct code.

        * include/plf_z8530.h
        Added this file to contain definitions and access macros to the
        Z8530 DUART for use in the HAL.
        
        * include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed some
        unnecessary defines.

        * include/plf_intr.h:
        * src/plf_misc.c: 
        Added Control-C support.

        * include/platform.inc: Some minor changes to diagnostic macros.

1999-05-21  Nick Garnett  <nickg@cygnus.co.uk>

        * src/plf_stub.c (hal_plf_init_serial): Tidied away some unused
        code.

        * src/platform.S:
        Made use of ROMRAM startup option where relevant.
        Modified code to be position independent since under ROMRAM
        startup it is linked to run in RAM but must actually run in ROM
        prior to the copy.
        Added some delay loops to try and get the hardware to settle on
        startup. Without these the machine sometimes wedges after
        power-on.

        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_stubs.ldi: 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_stubs.mlt:
        Added these files to support the new startup types.
        Note: at present the .mlt files do not match the .ldi files.

        * include/pkgconf/hal_mips_vr4300_vrc4373.h:
        Added ROMRAM and STUBS startup options to CDL. Moved default ports
        for DIAG and GDB to 0 at 38400 baud.
        Added an ifdef to modify the configuration for STUBS startup.

        * include/plf_stub.h: Removed spurious include.

        * include/platform.inc:
        Added version of INITIAL_SR for use with GDB stubs.
        Added implementation of "lar" macro and converted the relevant
        instances of "la" to use it.
        Made use of ROMRAM startup option where relevant.
        Implemented copy of ROM image to RAM and transfer of control to
        it.
        Tidied up trampoline copy and VSR table init in monitor init
        macros.
        Added code to generate messages to the GrammerEngine PromIce AI
        interface during initialization.

1999-05-20  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/pkgconf/hal_mips_vr4300_vrc4373.h: Move RTC setup here.

1999-05-13  Nick Garnett  <nickg@cygnus.co.uk>

        Imported whole directory tree into main trunk of repository.
        
1999-05-11  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch] 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi:
        Moved RAM and ROM back to their correct addresses.

        * include/pkgconf/hal_vr4300_vrc4373.h: 
        * include/pkgconf/hal_mips_vr4300_vrc4373.h:
        Renamed hal_vr4300_vrc4373.h to match file name synthesized by
        pkgconf.tcl.

        * src/hal_diag.c:
        * src/plf_stub.c: 
        Removed explicit include of vrc4372 pkgconf file.

1999-05-06  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch]
        * include/pkgconf/hal_vr4300_vrc4373.h: Switched initial DIAG and
        GDB baud rates to 38400.

        * include/plf_stub.h:
        * src/plf_stub.c:
        Added hal_plf_stub_init() to initialize the virtual vector table
        for thread-aware debugging.

1999-05-05  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch] 
        * include/platform.inc: Added code to plant interrupt VSR in table
        when using PMON.

1999-04-29  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch] 
        * include/pkgconf/mlt_mips_vr4300_vrc4373_ram.ldi:
        * include/pkgconf/mlt_mips_vr4300_vrc4373_ram.mlt: 
        Load address moved to 0x80100000, which is the cacheable area (kseg0).

        * include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi: For testing
        purposes ROM loaded code is put at 0x80680000 and its working RAM
        at 0x80600800. These will be moved back to the real addresses when
        we can build real ROMs.
        The corresponding .mlt file has NOT been changed.

        * src/plf_stub.c (hal_plf_init_serial): Re-enabled initialization
        of serial port.
        Temporarily made calls to PMON close function unconditional.

        * src/plf_misc.c (hal_platform_init): Added call to
        patch_dbg_syscalls().

        * src/platform.S: Lots of code, tables and definitions added to
        initialize the MMU and memory/bus controllers.

        * src/hal_diag.c: Added support for GDB protocol messages.

        * include/platform.inc: Added hal_mmu_init and hal_memc_init
        macros. Added code to initialize the VSR table in various
        configurations. 

1999-04-26  Gary Thomas  <gthomas@cygnus.co.uk>

        [VR4300 branch] 
        * include/pkgconf/hal_vr4300_vrc4373.h: Default diagnostics on port B.

        * src/hal_diag.c (hal_diag_init): Port initialization was incorrect.

1999-04-23  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch]
        * include/platform.inc: Added some extra vsr table redirects for
        most other exceptions while we are running under PMON.

1999-04-22  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch]         
        * include/plf_stub.h: 
        * src/plf_stub.c:
        * src/PKGconf.mak (COMPILE): 
        Files added to start work on GDB stub support.

1999-04-22  Gary Thomas  <gthomas@cygnus.co.uk>

        [VR4300 branch] 
        * src/hal_diag.c: 
        * include/pkgconf/hal_vr4300_vrc4373.h: Add diag/gdb serial
        port configury.

1999-04-22  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch] 
        * include/platform.inc: Modified hal_intc_init to always enable
        IPL0..2 bits in CP0 status register.

1999-04-21  Nick Garnett  <nickg@cygnus.co.uk>

        [VR4300 branch]
        * src/plf_misc.c: Added this file to contain hal_platform_init().

        * src/pmon.S: Renamed pmon entry functions to avoid clashes with
        the C library. Removed unused code.

        * src/platform.S: Added this file. It contains an ISR springboard
        routine to decode interrupts via the vrc4372, a breakpoint
        springboard to allow breakpoints to continue being handled by
        PMON, and board specific versions of the ISR tables.
        [later] Fixed a bug in the ISR springboard, added a few comments
        too.
        
        * src/hal_diag.c: Implemented direct-to-hardware diagnostic
        output.

        * src/PKGconf.mak (COMPILE): Added platform.S.
        Added plf_misc.c.

        * include/plf_intr.h: Added extensive support for vr4372 interrupt
        controller.

        * include/platform.inc: Added an initial status register value to
        avoid upsetting PMON. Added plant of hal_breakpoint_springboard in
        VSR table. Added some diagnostic code to wiggle a led.
        Added an implementation of hal_intc_init. Changed initial status
        register value. Moved VRC4372 register definitions here.