URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mips/] [vrc437x/] [v2_0/] [include/] [plf_intr.h] - Rev 757
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef CYGONCE_HAL_PLF_INTR_H #define CYGONCE_HAL_PLF_INTR_H //========================================================================== // // plf_intr.h // // VRC437X Interrupt and clock support // //========================================================================== //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): nickg // Contributors: nickg, jskov, // gthomas, jlarmour // Date: 1999-02-16 // Purpose: Define Interrupt support // Description: The macros defined here provide the HAL APIs for handling // interrupts and the clock for the VRC437X board. // // Usage: // #include <cyg/hal/plf_intr.h> // ... // // //####DESCRIPTIONEND#### // //========================================================================== #include <pkgconf/hal.h> #include <cyg/infra/cyg_type.h> //-------------------------------------------------------------------------- // Interrupt controller stuff. // The first 6 correspond to the interrupt lines in the status/cause regs #define CYGNUM_HAL_INTERRUPT_VRC437X 0 #define CYGNUM_HAL_INTERRUPT_IPL0 1 #define CYGNUM_HAL_INTERRUPT_IPL1 2 #define CYGNUM_HAL_INTERRUPT_IPL2 3 #define CYGNUM_HAL_INTERRUPT_POWER 4 #define CYGNUM_HAL_INTERRUPT_COMPARE 5 // The next 32 correspond to the interrupt lines in the 4372 interrupt // controller. These are decoded from the controller when an interrupt // on any of the IPL[0:2] lines in signalled. #define CYGNUM_HAL_INTERRUPT_REALTIME_A 6 #define CYGNUM_HAL_INTERRUPT_REALTIME_B 7 #define CYGNUM_HAL_INTERRUPT_DUART 8 #define CYGNUM_HAL_INTERRUPT_TIMER 9 #define CYGNUM_HAL_INTERRUPT_PARALLEL 10 #define CYGNUM_HAL_INTERRUPT_PCI_INTA 11 #define CYGNUM_HAL_INTERRUPT_PCI_INTB 12 #define CYGNUM_HAL_INTERRUPT_PCI_INTC 13 #define CYGNUM_HAL_INTERRUPT_PCI_INTD 14 #define CYGNUM_HAL_INTERRUPT_INT_9 15 #define CYGNUM_HAL_INTERRUPT_INT_10 16 #define CYGNUM_HAL_INTERRUPT_INT_11 17 #define CYGNUM_HAL_INTERRUPT_INT_12 18 #define CYGNUM_HAL_INTERRUPT_INT_13 19 #define CYGNUM_HAL_INTERRUPT_DMA_0 20 #define CYGNUM_HAL_INTERRUPT_DMA_1 21 #define CYGNUM_HAL_INTERRUPT_DMA_2 22 #define CYGNUM_HAL_INTERRUPT_DMA_3 23 #define CYGNUM_HAL_INTERRUPT_TICK_0 24 #define CYGNUM_HAL_INTERRUPT_TICK_1 25 #define CYGNUM_HAL_INTERRUPT_UNUSED_20 26 #define CYGNUM_HAL_INTERRUPT_UNUSED_21 27 #define CYGNUM_HAL_INTERRUPT_IO_TIMEOUT 28 #define CYGNUM_HAL_INTERRUPT_PCI_PERR 29 #define CYGNUM_HAL_INTERRUPT_PCI_SERR 30 #define CYGNUM_HAL_INTERRUPT_PCI_SIG_TA 31 #define CYGNUM_HAL_INTERRUPT_PCI_REC_TA 32 #define CYGNUM_HAL_INTERRUPT_PCI_SIG_MA 33 #define CYGNUM_HAL_INTERRUPT_PCI_ADD 34 #define CYGNUM_HAL_INTERRUPT_PCI_RET_ERR 35 #define CYGNUM_HAL_INTERRUPT_UNUSED_30 36 #define CYGNUM_HAL_INTERRUPT_UNUSED_31 37 // Min/Max ISR numbers and how many there are #define CYGNUM_HAL_ISR_MIN 0 #define CYGNUM_HAL_ISR_MAX 37 #define CYGNUM_HAL_ISR_COUNT 38 // The vector used by the Real time clock. The default here is to use // interrupt 5, which is connected to the counter/comparator registers // in many MIPS variants. #ifndef CYGNUM_HAL_INTERRUPT_RTC #define CYGNUM_HAL_INTERRUPT_RTC CYGNUM_HAL_INTERRUPT_COMPARE #endif #define CYGHWR_HAL_INTERRUPT_VECTORS_DEFINED //-------------------------------------------------------------------------- // Vector translation. // For chained interrupts we only have a single vector though which all // are passed. For unchained interrupts we have a vector per interrupt. // Vector 0 has a special catcher ISR for spurious interrupts from the VRC437X // and vectors 1-3 are springboards, so we chain through vector 4. #if defined(CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN) #define HAL_TRANSLATE_VECTOR(_vector_,_index_) \ { \ if ((_vector_)==0) \ (_index_) = 0; \ else \ (_index_) = 4; \ } #endif //-------------------------------------------------------------------------- // controller access code #define CYGHWR_HAL_MIPS_VRC4372_BASE 0xbc000000 #define CYGHWR_HAL_MIPS_VRC4372_INTC_POL (CYGHWR_HAL_MIPS_VRC4372_BASE+0x200) #define CYGHWR_HAL_MIPS_VRC4372_INTC_TRIG (CYGHWR_HAL_MIPS_VRC4372_BASE+0x204) #define CYGHWR_HAL_MIPS_VRC4372_INTC_PINS (CYGHWR_HAL_MIPS_VRC4372_BASE+0x208) #define CYGHWR_HAL_MIPS_VRC4372_INTC_MASK0 (CYGHWR_HAL_MIPS_VRC4372_BASE+0x20c) #define CYGHWR_HAL_MIPS_VRC4372_INTC_STAT0 (CYGHWR_HAL_MIPS_VRC4372_BASE+0x210) #define CYGHWR_HAL_MIPS_VRC4372_INTC_MASK1 (CYGHWR_HAL_MIPS_VRC4372_BASE+0x214) #define CYGHWR_HAL_MIPS_VRC4372_INTC_STAT1 (CYGHWR_HAL_MIPS_VRC4372_BASE+0x218) #define CYGHWR_HAL_MIPS_VRC4372_INTC_MASK2 (CYGHWR_HAL_MIPS_VRC4372_BASE+0x21c) #define CYGHWR_HAL_MIPS_VRC4372_INTC_STAT2 (CYGHWR_HAL_MIPS_VRC4372_BASE+0x220) #define CYGHWR_HAL_MIPS_VRC4372_INTC_MASK_OFF 8 // Array which stores the configured priority levels for the configured // interrupts. externC volatile CYG_BYTE cyg_hal_interrupt_level[CYGNUM_HAL_ISR_COUNT]; #define HAL_INTERRUPT_MASK( _vector_ ) \ CYG_MACRO_START \ if( _vector_ <= CYGNUM_HAL_INTERRUPT_COMPARE ) \ { \ asm volatile ( \ "mfc0 $3,$12\n" \ "la $2,0x00000400\n" \ "sllv $2,$2,%0\n" \ "nor $2,$2,$0\n" \ "and $3,$3,$2\n" \ "mtc0 $3,$12\n" \ "nop; nop; nop\n" \ : \ : "r"(_vector_) \ : "$2", "$3" \ ); \ } \ else \ { \ CYG_WORD32 _mask_; \ CYG_BYTE _shift_; \ HAL_IO_REGISTER _maskreg_ = CYGHWR_HAL_MIPS_VRC4372_INTC_MASK0 + \ cyg_hal_interrupt_level[_vector_] * \ CYGHWR_HAL_MIPS_VRC4372_INTC_MASK_OFF; \ HAL_READ_UINT32( _maskreg_, _mask_ ); \ _shift_ = _vector_-CYGNUM_HAL_INTERRUPT_REALTIME_A; \ _mask_ &= ~(1<<_shift_); \ HAL_WRITE_UINT32( _maskreg_, _mask_ ); \ } \ CYG_MACRO_END #define HAL_INTERRUPT_UNMASK( _vector_ ) \ CYG_MACRO_START \ if( _vector_ <= CYGNUM_HAL_INTERRUPT_COMPARE ) \ { \ asm volatile ( \ "mfc0 $3,$12\n" \ "la $2,0x00000400\n" \ "sllv $2,$2,%0\n" \ "or $3,$3,$2\n" \ "mtc0 $3,$12\n" \ "nop; nop; nop\n" \ : \ : "r"(_vector_) \ : "$2", "$3" \ ); \ } \ else \ { \ CYG_WORD32 _mask_; \ CYG_BYTE _shift_; \ HAL_IO_REGISTER _maskreg_ = CYGHWR_HAL_MIPS_VRC4372_INTC_MASK0 + \ cyg_hal_interrupt_level[_vector_] * \ CYGHWR_HAL_MIPS_VRC4372_INTC_MASK_OFF; \ HAL_READ_UINT32( _maskreg_, _mask_ ); \ _shift_ = _vector_-CYGNUM_HAL_INTERRUPT_REALTIME_A; \ _mask_ |= 1<<_shift_; \ HAL_WRITE_UINT32( _maskreg_, _mask_ ); \ } \ CYG_MACRO_END #define HAL_INTERRUPT_ACKNOWLEDGE( _vector_ ) \ CYG_MACRO_START \ CYG_WORD32 _srvector_ = _vector_; \ if( _vector_ > CYGNUM_HAL_INTERRUPT_COMPARE ) \ { \ CYG_WORD32 _stat_; \ CYG_BYTE _shift_; \ HAL_IO_REGISTER _statreg_ = CYGHWR_HAL_MIPS_VRC4372_INTC_STAT0 +\ cyg_hal_interrupt_level[_vector_] * \ CYGHWR_HAL_MIPS_VRC4372_INTC_MASK_OFF; \ HAL_READ_UINT32( _statreg_, _stat_ ); \ _shift_ = _vector_-CYGNUM_HAL_INTERRUPT_REALTIME_A; \ _stat_ &= ~(1<<_shift_); \ HAL_WRITE_UINT32( _statreg_, _stat_ ); \ _srvector_ = cyg_hal_interrupt_level[_vector_] + \ CYGNUM_HAL_INTERRUPT_IPL0; \ } \ asm volatile ( \ "mfc0 $3,$13\n" \ "la $2,0x00000400\n" \ "sllv $2,$2,%0\n" \ "nor $2,$2,$0\n" \ "and $3,$3,$2\n" \ "mtc0 $3,$13\n" \ "nop; nop; nop\n" \ : \ : "r"(_srvector_) \ : "$2", "$3" \ ); \ CYG_MACRO_END #define HAL_INTERRUPT_CONFIGURE( _vector_, _level_, _up_ ) \ CYG_MACRO_START \ if( (_vector_ >= CYGNUM_HAL_INTERRUPT_REALTIME_A) && \ (_vector_ <= CYGNUM_HAL_INTERRUPT_INT_13)) \ { \ CYG_WORD32 mask = 1<<(_vector_-CYGNUM_HAL_INTERRUPT_REALTIME_A); \ CYG_WORD32 pol; \ CYG_WORD32 trig; \ HAL_READ_UINT32( CYGHWR_HAL_MIPS_VRC4372_INTC_POL, pol ); \ HAL_READ_UINT32( CYGHWR_HAL_MIPS_VRC4372_INTC_TRIG, trig ); \ if( _level_ ) \ { \ pol &= ~mask; \ if( _up_ ) trig |= mask; \ else trig &= ~mask; \ } \ else \ { \ pol |= mask; \ if( !(_up_) ) trig |= mask; \ else trig &= ~mask; \ } \ HAL_WRITE_UINT32( CYGHWR_HAL_MIPS_VRC4372_INTC_POL, pol ); \ HAL_WRITE_UINT32( CYGHWR_HAL_MIPS_VRC4372_INTC_TRIG, trig ); \ } \ CYG_MACRO_END #define HAL_INTERRUPT_SET_LEVEL( _vector_, _level_ ) \ CYG_MACRO_START \ if( _vector_ > CYGNUM_HAL_INTERRUPT_COMPARE ) \ { \ cyg_uint32 _ilevel_ = _level_; \ while( _ilevel_ > 2 ) _ilevel_ -= 2; \ cyg_hal_interrupt_level[_vector_] = _ilevel_; \ } \ CYG_MACRO_END #define CYGHWR_HAL_INTERRUPT_CONTROLLER_ACCESS_DEFINED //-------------------------------------------------------------------------- // Control-C support. #if defined(CYGDBG_HAL_MIPS_DEBUG_GDB_CTRLC_SUPPORT) # define CYGHWR_HAL_GDB_PORT_VECTOR CYGNUM_HAL_INTERRUPT_DUART externC cyg_uint32 hal_ctrlc_isr(CYG_ADDRWORD vector, CYG_ADDRWORD data); #define HAL_CTRLC_ISR hal_ctrlc_isr #endif //---------------------------------------------------------------------------- // Reset. #define HAL_PLATFORM_RESET() CYG_EMPTY_STATEMENT #define HAL_PLATFORM_RESET_ENTRY 0xbfc00000 //-------------------------------------------------------------------------- #endif // ifndef CYGONCE_HAL_PLF_INTR_H // End of plf_intr.h
Go to most recent revision | Compare with Previous | Blame | View Log