URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [openrisc/] [arch/] [current/] [include/] [openrisc_stub.h] - Rev 249
Go to most recent revision | Compare with Previous | Blame | View Log
//======================================================================== // // openrisc_stub.h // // OpenRISC-specific definitions for remote debugging via gdb // //======================================================================== //####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later version. // // eCos is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License along // with eCos; if not, write to the Free Software Foundation, Inc., // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. // // As a special exception, if other files instantiate templates or use macros // or inline functions from this file, or you compile this file and link it // with other works to produce a work based on this file, this file does not // by itself cause the resulting work to be covered by the GNU General Public // License. However the source code for this file must still be made available // in accordance with section (3) of the GNU General Public License. // // This exception does not invalidate any other reasons why a work based on // this file might be covered by the GNU General Public License. // // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. // at http://sources.redhat.com/ecos/ecos-license/ // ------------------------------------------- //####ECOSGPLCOPYRIGHTEND#### //======================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): sfurman // Contributors:Red Hat, nickg, dmoseley // Date: 2003-02-18 // Purpose: OpenRISC-specific definitions for gdb stubs support // // //####DESCRIPTIONEND#### // //============================================================================= #ifndef CYGONCE_HAL_OPENRISC_STUB_H #define CYGONCE_HAL_OPENRISC_STUB_H #include <pkgconf/system.h> #include <pkgconf/hal.h> #ifdef CYGPKG_IO_SERIAL #include <pkgconf/io_serial.h> #endif #include <cyg/hal/hal_diag.h> #ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS #include <cyg/infra/cyg_type.h> // CYG_UNUSED_PARAM, externC #define HAL_STUB_PLATFORM_INIT_SERIAL() HAL_DIAG_INIT() #define HAL_STUB_PLATFORM_GET_CHAR() \ ((cyg_int8)({ \ cyg_int8 _ch_; \ HAL_DIAG_READ_CHAR(_ch_); \ _ch_; \ })) #define HAL_STUB_PLATFORM_PUT_CHAR(c) HAL_DIAG_WRITE_CHAR((c)) #define HAL_STUB_PLATFORM_SET_BAUD_RATE(baud) CYG_UNUSED_PARAM(int,(baud)) #define HAL_STUB_PLATFORM_RESET() HAL_DIAG_INIT() #define HAL_STUB_PLATFORM_INIT() HAL_DIAG_INIT() #endif // ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS // 32 GPRs + 32 VFRs + PC reg + SR reg #define NUMREGS 66 // VFR regs are unimplemented so they are 0 bytes in length #define REGSIZE( _x_ ) ((((_x_) <= R31) || ((_x_) > VFR31)) ? 4 : 0) typedef unsigned long target_register_t; enum regnames { R0, SP, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, // Vector/Float registers, which are as yet unimplemented, // but defined in the or32 gdb back-end. VFR0, VFR1, VFR2, VFR3, VFR4, VFR5, VFR6, VFR7, VFR8, VFR9, VFR10, VFR11, VFR12, VFR13, VFR14, VFR15, VFR16, VFR17, VFR18, VFR19, VFR20, VFR21, VFR22, VFR23, VFR24, VFR25, VFR26, VFR27, VFR28, VFR29, VFR30, VFR31, // Special-purpose registers PC, SR }; typedef enum regnames regnames_t; // Override generic stubs get_register() and use arch-specific version #define CYGARC_STUB_REGISTER_ACCESS_DEFINED #if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT) || defined(CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT) #define HAL_GET_PROFILE_INFO( _thepc_, _thesp_ ) \ CYG_MACRO_START \ extern HAL_SavedRegisters *hal_saved_interrupt_state; \ if ( hal_saved_interrupt_state ) { \ (_thepc_) = (char *)(hal_saved_interrupt_state->pc); \ (_thesp_) = (char *)(hal_saved_interrupt_state->sp); \ } \ CYG_MACRO_END #endif /* Given a trap value TRAP, return the corresponding signal. */ externC int __computeSignal (unsigned int trap_number); /* Return the trap number corresponding to the last-taken trap. */ externC int __get_trap_number (void); /* Return the currently-saved value corresponding to register REG. */ externC target_register_t get_register (regnames_t reg); /* Store VALUE in the register corresponding to WHICH. */ externC void put_register (regnames_t which, target_register_t value); /* Set the currently-saved pc register value to PC. This also updates NPC as needed. */ externC void set_pc (target_register_t pc); /* Set things up so that the next user resume will execute one instruction. This may be done by setting breakpoints or setting a single step flag in the saved user registers, for example. */ externC void __single_step (void); /* Clear the single-step state. */ externC void __clear_single_step (void); /* If the breakpoint we hit is in the breakpoint() instruction, return a non-zero value. */ externC int __is_breakpoint_function (void); /* Skip the current instruction. */ externC void __skipinst (void); externC void __install_breakpoints (void); externC void __clear_breakpoints (void); #endif // ifndef CYGONCE_HAL_OPENRISC_STUB_H
Go to most recent revision | Compare with Previous | Blame | View Log