URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [powerpc/] [mbx/] [v2_0/] [misc/] [stubrom.perm] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
#
# A configuration for building a GDB stub ROM for the Motorola MBX board,
# with MPC 860 or 821 CPU.
#
# To build the ROMs:
# 1. Create a build directory and cd into it.
# 2. Run: permtest.tcl --srcdir=<SOURCEDIR> <SOURCEDIR>/hal/powerpc/mbx/current/misc/stubrom.perm
# Where <SOURCEDIR> is the path to your source repository.
# (If necessary, make sure the system clock speed is set correctly in
# pkgconf/hal_powerpc_mbx.h: 40MHz (MPC821) versus 50MHz (MPC860) by default)
# If you do not have permtest, use the config tool or an editor to make
# the changes listed below to the relevant configuration files.
# If you intend to install the image into the 32-bit flash device instead of
# the 8-bit socketed ROM, set the option CYGHWR_HAL_POWERPC_MBX_BOOT_32BIT_FLASH
# in hal_powerpc_mbx.h
# 3. Run: make
# 4. Run: make -C hal/common/current/src/stubrom
#
# The file hal/common/current/src/stubrom/stubrom will be an excutable of the ROM.
# Use objcopy to convert this to the appropriate format for your PROM burner:
# powerpc-eabi-objcopy -O binary hal/common/current/src/stubrom/stubrom stubrom.img
# Enjoy!
#
pkgconf --target=powerpc --platform=mbx --startup=rom --disable-kernel --disable-uitron --disable-libc --disable-libm --disable-io --disable-io_serial --disable-wallclock --disable-watchdog
header hal.h {
enable CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
disable CYGFUN_HAL_COMMON_KERNEL_SUPPORT
disable CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
disable CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
disable CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
enable CYG_HAL_ROM_MONITOR
}
# enable CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT excluded for now
Go to most recent revision | Compare with Previous | Blame | View Log