Subversion Repositories openrisc_2011-10-31

##=============================================================================
##
##      mbx.S
##
##      MBX board hardware setup
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   hmt
## Contributors:hmt
## Date:        1999-06-08
## Purpose:     MBX board hardware setup
## Description: This file contains any code needed to initialize the
##              hardware on a MBX860 or 821 PowerPC board.
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <pkgconf/system.h>
#include <pkgconf/hal.h>
#include <pkgconf/hal_powerpc.h>
#include <pkgconf/hal_powerpc_mbx.h>
        
#include <cyg/hal/arch.inc>             /* register symbols et al */
#include <cyg/hal/ppc_regs.h>           /* on-chip resource layout, special */
                                        /* registers, IMM layout...         */
#include <cyg/hal/quicc/ppc8xx.h>       /* more of the same */
        
#------------------------------------------------------------------------------
# this is kept thus for commonality with CygMon code

#if 40 == CYGHWR_HAL_POWERPC_BOARD_SPEED
# define __40MHZ 1
#elif 50 == CYGHWR_HAL_POWERPC_BOARD_SPEED
# define __50MHZ 1
#else
# error Bad Board speed defined: see CYGBLD_HAL_PLATFORM_H
#endif

#------------------------------------------------------------------------------
# this is controlled with one define for tidiness:
# (and it is undefined by default)

//#define CYGPRI_RAM_START_PROGRAMS_UPMS

#if defined(CYG_HAL_STARTUP_ROM) || defined(CYGPRI_RAM_START_PROGRAMS_UPMS)
# define CYGPRI_DO_PROGRAM_UPMS
#endif

#if defined(CYGPRI_RAM_START_PROGRAMS_UPMS) && defined(CYGSEM_HAL_ROM_MONITOR)
/* use old tables in a StubROM build iff RAM start will reprogram them */
# define CYGPRI_USE_OLD_UPM_TABLES
#endif

/* The intention is that we only set up the UPMs in ROM start, be it actual
 * ROM application start or Stub ROMs that we built from the same sources.
 * 
 * The alternative approach - in which we have reliability doubts - is to
 * program the UPMs with *old* timing data in StubROM start, then
 * *reprogram* them with *new* timing data in RAM start - and of course
 * program with *new* timing data in plain ROM application start.
 * (Re-programming from new to new timing data fails - hence the suspicion
 * of reprogramming _at_all_, hence this private configuration)
 * 
 * With CYGPRI_RAM_START_PROGRAMS_UPMS left undefined, the former behaviour
 * - programming the UPMs exactly once - is obtained.  Define it to get the
 * latter, untrusted behaviour.
 */
        
#------------------------------------------------------------------------------

// LED macro uses r3, r5: r4 left alone
#define LED( x ) \
        lwi     r5,0xfa100001;         \
        lwi     r3,((x) & 0xe);        \
        stb     r3,0(r5)

        
#------------------------------------------------------------------------------
                
FUNC_START( hal_hardware_init )

        # Throughout this routine, r4 is the base address of the control
        # registers.  r3 and r5 are scratch in general.
        
        lwi     r4,CYGARC_REG_IMM_BASE  # base address of control registers
        mtspr   CYGARC_REG_IMMR,r4

        LED( 0 )                        # turn all LEDs on
        
#define CACHE_UNLOCKALL         0x0a00
#define CACHE_DISABLE           0x0400
#define CACHE_INVALIDATEALL     0x0c00
#define CACHE_ENABLE            0x0200
#define CACHE_ENABLEBIT         0x8000

#define CACHE_FORCEWRITETHROUGH 0x0100
#define CACHE_NOWRITETHROUGH    0x0300
#define CACHE_CLEAR_LE_SWAP     0x0700

        # DATA CACHE
        mfspr   r3,CYGARC_REG_DC_CST            /* clear error bits */
        lis     r3,CACHE_UNLOCKALL
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* unlock all lines */
        
        lis     r3,CACHE_INVALIDATEALL
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* invalidate all lines */

        lis     r3,CACHE_DISABLE
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* disable */
        
        lis     r3,CACHE_FORCEWRITETHROUGH
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* set force-writethrough mode */

        lis     r3,CACHE_CLEAR_LE_SWAP
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* clear little-endian swap mode */
        /* (dunno what this is, but it sounds like a bad thing) */
        
        # INSTRUCTION CACHE (no writeback modes)
        mfspr   r3,CYGARC_REG_IC_CST            /* clear error bits */
        lis     r3,CACHE_UNLOCKALL
        mtspr   CYGARC_REG_IC_CST,r3            /* unlock all lines */
        isync
        lis     r3,CACHE_INVALIDATEALL
        mtspr   CYGARC_REG_IC_CST,r3            /* invalidate all lines */
        isync
        lis     r3,CACHE_DISABLE
        mtspr   CYGARC_REG_IC_CST,r3            /* disable */
        isync
        
        sync
        
        /*
         * SIU Initialization.
         */
/*        lwi   r3,0x0062A900*/
/*        lwi   r3,0x006A2900*/
        lwi     r3,0x00602400
        stw     r3,SIUMCR(r4)

        /*
         * Enable bus monitor. Disable Watchdog timer.
         */
        lwi     r3,0xffffff88
        stw     r3,SYPCR(r4)

        /*
         * Clear REFA & REFB. Enable but freeze timebase.
         */
        lwi     r3,0x00c2
        sth     r3,TBSCR(r4)

        /*
         * Unlock some RTC registers (see section 5.11.2)
         */
        lwi     r3,0x55ccaa33
        stw     r3,RTCSCK(r4)
        stw     r3,RTCK(r4)
        stw     r3,RTSECK(r4)
        stw     r3,RTCALK(r4)

        /*
         * Clear SERC & ALR. RTC runs on freeze. Enable RTC.
         */
        li      r3,0x00c3
        sth     r3,RTCSC(r4)

        /*
         * Clear periodic timer interrupt status.
         * Enable periodic timer and stop it on freeze.
         */
        li      r3,0x0083
        sth     r3,PISCR(r4)

#ifdef CYGPRI_DO_PROGRAM_UPMS
        /*
         * Perform UPM programming by writing to its 64 RAM locations.
         * Note that UPM initialization must be done before the Bank Register
         * initialization. Otherwise, system may hang when writing to Bank
         * Registers in certain cases.
         */
        lis     r5,__upmtbl_start@h
        ori     r5,r5,__upmtbl_start@l
        lis     r6,__upmtbl_end@h
        ori     r6,r6,__upmtbl_end@l
        sub     r7,r6,r5      /* size of table */ 
        srawi   r7,r7,2       /* in words */
        
        li      r6,0x0000     /* Command - OP=Write, UPMA, MAD=0 */
    1:
        lwz     r3,0(r5)      /* get data from table */
        stw     r3,MDR(r4)    /* store the data to MD register */
        stw     r6,MCR(r4)    /* issue command to MCR register */
        addi    r5,r5,4       /* next entry in the table */
        addi    r6,r6,1       /* next MAD address */
        cmpw    r6,r7         /* done yet ? */
        blt     1b
#endif // CYGPRI_DO_PROGRAM_UPMS

        /*
         * Set refresh timer prescaler to divide by 8.
         */
        li      r3,PTP_DIV32
        sth     r3,MPTPR(r4)

        /*
         * See Table 15-16 MPC860 User's Manual.
         *
         * PTA = 0x13 (clock dependent)
         * PTAE = enabled
         * AMA = 0
         * DSA = 2 cycle disable
         * G0CLA = A12
         * GPL_A4DIS = 0
         * RLFA = 0
         * WLFA = 0
         * TLFA = 0
         */
#ifdef __50MHZ
        lwi     r3,0x18801000
#else
        lwi     r3,0x13801000
#endif
        stw     r3,MAMR(r4)

        /*
         * Base Register initialization.
         */
        /* BOOT ROM */
        lwi     r3,0xfe000401   # 8-bit, GPCM
#ifdef __50MHZ
        lwi     r5,0xff800960 /* for 120nS devices, else 0xff800940 */
#else
        lwi     r5,0xff800930
#endif
#ifdef CYGHWR_HAL_POWERPC_MBX_BOOT_32BIT_FLASH
        // Then the 32-bit FLASH device is on CS0, the "ROM" is on CS7
        stw     r3,BR7(r4)
        stw     r5,OR7(r4)
#else   // Boot from 8-bit ROM - the default, on CS0
        stw     r3,BR0(r4)
        stw     r5,OR0(r4)
#endif
        /* ONBOARD DRAM */
        lwi     r3,0x00000081   # 32-bit, UPMA
        lwi     r5,0xffc00400
        stw     r3,BR1(r4)
        stw     r5,OR1(r4)

        /* DRAM DIMM BANK0 */
        lwi     r3,0x00000080   # 32-bit, UPMA, INVALID
        lwi     r5,0x00000400
        stw     r3,BR2(r4)
        stw     r5,OR2(r4)

        /* DRAM DIMM BANK1 */
        lwi     r3,0x00000080   # 32-bit, UPMA, INVALID
        lwi     r5,0x00000400
        stw     r3,BR3(r4)
        stw     r5,OR3(r4)

        /* NVRAM */
        lwi     r3,0xfa000401   # 8-bit, GPCM
#ifdef __50MHZ
        lwi     r5,0xffe00930
#else
        lwi     r5,0xffe00920
#endif
        stw     r3,BR4(r4)
        stw     r5,OR4(r4)

        /* PCI BRIDGE MEM/IO */
        lwi     r3,0x80000001   # 32-bit, GPCM
        lwi     r5,0xa0000108
        stw     r3,BR5(r4)
        stw     r5,OR5(r4)

        /* PCI BRIDGE REGISTERS */
        lwi     r3,0xfa210001   # 32-bit, GPCM
        lwi     r5,0xffff0108
        stw     r3,BR6(r4)
        stw     r5,OR6(r4)

        /* FLASH */
        lwi     r3,0xfc000001   # 32-bit, GPCM
#ifdef __50MHZ
        lwi     r5,0xff800940
#else
        lwi     r5,0xff800930
#endif
#ifdef CYGHWR_HAL_POWERPC_MBX_BOOT_32BIT_FLASH
        // Then the 32-bit FLASH device is on CS0, the "ROM" is on CS7
        stw     r3,BR0(r4)
        stw     r5,OR0(r4)
#else   // Boot from 8-bit ROM - so the 32-bit FLASH is on CS7
        stw     r3,BR7(r4)
        stw     r5,OR7(r4)
#endif
        /*
         *  SYSTEM CLOCK CONTROL REGISTER
         *
         *  COM   (1:2)   = 0
         *  TBS   (6)     = 1
         *  RTDIV (7)     = 0
         *  RTSEL (8)     = 0
         *  CRQEN (9)     = 0
         *  PRQEN (10)    = 0
         *  EBDF  (13:14) = 0
         *  DFSYNC(17:18) = 0
         *  DFBRG (19:20) = 0
         *  DFNL  (21:23) = 0
         *  DFNH  (24:26) = 0
         */
        lwi     r3,0x02000000
        stw     r3,SCCR(r4)
        
        /*
         *  The following sets up a 40MHz CPU clock.
         *  I've seen 2 variations of MBX boards. One
         *  uses a direct feed (1:1) 40MHz clock on
         *  EXTCLK inputs. The other uses a 32KHz
         *  oscillator on the OSCM inputs.
         */
        lwz     r3,PLPRCR(r4)
        rlwinm  r3,r3,12,20,31
        cmpwi   r3,0
        beq     1f
        
        /*
         *  PLL, LOW POWER, AND RESET CONTROL REGISTER
         *
         *  MF    (0:11)  = depends on source clock
         *  SPLSS (16)    = 1
         *  TEXPS (17)    = 1
         *  TMIST (19)    = 1
         *  CSRC  (21)    = 0
         *  LPM   (22:23) = 0
         *  CSR   (24)    = 0
         *  LOLRE (25)    = 0
         *  FIOPD (26)    = 0
         */
        /*  MF    (0:11)  = 0x4c4 = 1220 = (40MHz/32.768KHz) */
#ifdef __50MHZ
        lwi     r3,0x5f50d000
#else
        lwi     r3,0x4c40d000
#endif
        b       2f
    1:
        /*  MF    (0:11)  = 0x000 = 1 = (1:1) */
        lwi     r3,0x0000d000
    2:
        stw     r3,PLPRCR(r4)

        # mask interrupt sources in the SIU
        lis     r2,0
        lwi     r3,CYGARC_REG_IMM_SIMASK
        stw     r2,0(r3)

        # set the decrementer to maxint
        lwi     r2,0
        not     r2,r2
        mtdec   r2
        
        # and enable the timebase and decrementer to make sure
        li      r2,1                            # TBEnable and not TBFreeze
        lwi     r3,CYGARC_REG_IMM_TBSCR
        sth     r2,0(r3)

        LED( 8 ) # turn red led off

#ifdef CYG_HAL_STARTUP_ROM
        # move return address to where the ROM is
        mflr    r3
        andi.   r3,r3,0xffff
        oris    r3,r3,CYGMEM_REGION_rom>>16
        mtlr    r3
#endif

        blr
FUNC_END( hal_hardware_init )


#ifdef CYGPRI_DO_PROGRAM_UPMS
# -------------------------------------------------------------------------
# this table initializes the User Programmable Machine (UPM) nastiness
# in the QUICC to control DRAM timing.

__upmtbl_start:

#ifdef __25MHZ
        /* UPM contents for 25MHz clk. DRAM: EDO,4K,60ns */
        
        /* Single read. (offset 0 in upm RAM) */
        .long   0xcfffe004, 0x0fffe404, 0x08af2c04, 0x03af2c08
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst read. (offset 8 in upm RAM) */
        .long   0xcfffe004, 0x0fffe404, 0x08af2c04, 0x03af2c08
        .long   0x08af2c04, 0x03af2c08, 0x08af2c04, 0x03af2c08
        .long   0x08af2c04, 0x03af2c08, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Single write. (offset 18 in upm RAM) */
        .long   0xcfffe004, 0x0fffa404, 0x08ff2c00, 0x33ff6c0f
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst write. (offset 20 in upm RAM) */
        .long   0xcfffe004, 0x0fffa404, 0x08ff2c00, 0x03ff2c0c
        .long   0x08ff2c00, 0x03ff2c0c, 0x08ff2c00, 0x03ff2c0c
        .long   0x08ff2c00, 0x33ff6c0f, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Refresh (offset 30 in upm RAM) */
        .long   0xc0ffec04, 0x07ffec04, 0x3fffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
        
        /* Exception. (offset 3c in upm RAM) */
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
#endif

#ifdef __33MHZ
        /* UPM contents for 33MHz clk. DRAM: EDO,4K,60ns */
        
        /* Single read. (offset 0 in upm RAM) */
        .long   0xcfffe004, 0x0fffe404, 0x08af2c04, 0x03af2c08
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst read. (offset 8 in upm RAM) */
        .long   0xcfffe004, 0x0fffe404, 0x08af2c04, 0x03af2c08
        .long   0x08af2c04, 0x03af2c08, 0x08af2c04, 0x03af2c08
        .long   0x08af2c04, 0x03af2c08, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Single write. (offset 18 in upm RAM) */
        .long   0xcfffe004, 0x0fff2404, 0x08ff2c00, 0x33ff6c07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst write. (offset 20 in upm RAM) */
        .long   0xcfffe004, 0x0fff2404, 0x08ff2c00, 0x03ff2c0c
        .long   0x08ff2c00, 0x03ff2c0c, 0x08ff2c00, 0x03ff2c0c
        .long   0x08ff2c00, 0x33ff6c07, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Refresh (offset 30 in upm RAM) */
        .long   0xc0ffec04, 0x03ffec04, 0x1fffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
        
        /* Exception. (offset 3c in upm RAM) */
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
#endif

#ifdef CYGPRI_USE_OLD_UPM_TABLES

        // BUT new tables received from motorola are further down

        // And I just discovered a good reason for using the NEW TABLES:
        // with the old tables, the cache zero-a-line command does not
        // work.  It only zeros the first 12 bytes of the line, not all 16.
        // This may be related to having the cache set up write-through, as
        // seems necessary to have it work on this platform.

#ifdef __40MHZ
        /* UPM contents for 40MHz clk. DRAM: EDO,4K,60ns */
        
        /* Single read. (offset 0 in upm RAM) */
        .long   0xefffe004, 0x0fffe004, 0x0eefac04, 0x00af2c04
        .long   0x03af2c08, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst read. (offset 8 in upm RAM) */
        .long   0xefffe004, 0x0fffe004, 0x0eefac04, 0x00af2c04
        .long   0x03af2c08, 0x0caf2c04, 0x00af2c04, 0x03af2c08
        .long   0x0caf2c04, 0x00af2c04, 0x03af2c08, 0x0caf2c04
        .long   0x00af2c04, 0x03af2c08, 0xffffec07, 0xffffec07

        /* Single write. (offset 18 in upm RAM) */
        .long   0xefffe004, 0x0fffa004, 0x0eff2c04, 0x00ff2c00
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst write. (offset 20 in upm RAM) */
        .long   0xefffe004, 0x0fffa004, 0x0eff2c04, 0x00ff2c00
        .long   0x0fff2c0c, 0x0cff2c00, 0x03ff2c0c, 0x0cff2c00
        .long   0x03ff2c0c, 0x0cff2c00, 0x33ff6c07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07

        /* Refresh (offset 30 in upm RAM) */
        .long   0xf0ffec04, 0x00ffec04, 0x0fffec04, 0x0fffec04
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
        
        /* Exception. (offset 3c in upm RAM) */
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
#endif

#ifdef __50MHZ
        /* UPM contents for 50MHZ clk. DRAM: EDO,4K,60ns */
        
        /* Single read. (offset 0 in upm RAM) */
        .long   0xffffe004, 0x0fffe004, 0x0fffe404, 0x0cafac04
        .long   0x00af2c04, 0x0faf2c08, 0xffffec07, 0xffffec07

        /* Burst read. (offset 8 in upm RAM) */
        .long   0xffffe004, 0x0fffe004, 0x0fffe404, 0x0cafac04
        .long   0x00af2c04, 0x0faf2c08, 0x0caf2c04, 0x00af2c04
        .long   0x0faf2c08, 0x0caf2c04, 0x00af2c04, 0x0faf2c08
        .long   0x0caf2c04, 0x00af2c04, 0x0faf2c08, 0xffffec07

        /* Single write. (offset 18 in upm RAM) */
        .long   0xffffe004, 0x0fffe004, 0x0fffa404, 0x0cff2c04
        .long   0x00ff2c00, 0xffffec07, 0xffffec07, 0xffffec07

        /* Burst write. (offset 20 in upm RAM) */
        .long   0xffffe004, 0x0fffe004, 0x0fffa404, 0x0cff2c04
        .long   0x00ff2c00, 0x0fff2c08, 0x0cff2c04, 0x00ff2c00
        .long   0x0fff2c00, 0x0cff2c04, 0x00ff2c00, 0x0fff2c08
        .long   0x0cff2c04, 0x00ff2c00, 0xffffec07, 0xffffec07

        /* Refresh (offset 30 in upm RAM) */
        .long   0xf0ffec04, 0xc0ffec04, 0x00ffec04, 0x0fffec04
        .long   0x1fffec07, 0xffffec07, 0xffffec07, 0xffffec07
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
                
        /* Exception. (offset 3c in upm RAM) */
        .long   0xffffec07, 0xffffec07, 0xffffec07, 0xffffec07
#endif

#else // !CYGPRI_USE_OLD_UPM_TABLES: use the NEW TABLES

        // for RAM startup or ROM application when NOT making a stub rom,
        // ie. CYGSEM_HAL_ROM_MONITOR not defined.

#ifdef __40MHZ
        /* UPM contents for 40MHz clk. DRAM: EDO,4K,60ns */
        .long   0xcfafc004, 0x0fafc404, 0x0caf0c04, 0x30af0c00
        .long   0xf1bf4805, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xcfafc004, 0x0fafc404, 0x0caf0c04, 0x03af0c08
        .long   0x0caf0c04, 0x03af0c08, 0x0caf0c04, 0x03af0c08
        .long   0x0caf0c04, 0x30af0c00, 0xf3bf4805, 0xffffc005
        .long   0xffffc005, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xcfff0004, 0x0fff0404, 0x0cff0c00, 0x33ff4804
        .long   0xffffc005, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xcfff0004, 0x0fff0404, 0x0cff0c00, 0x03ff0c0c
        .long   0x0cff0c00, 0x03ff0c0c, 0x0cff0c00, 0x03ff0c0c
        .long   0x0cff0c00, 0x33ff4804, 0xffffc005, 0xffffc005
        .long   0xffffc005, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xfcffc004, 0xc0ffc004, 0x01ffc004, 0x0fffc004
        .long   0x3fffc004, 0xffffc005, 0xffffc005, 0xffffc005
        .long   0xffffc005, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xffffc007, 0xffffc007, 0xffffc007, 0xffffc007
#endif
        
#ifdef __50MHZ
        /* UPM contents for 50MHZ clk. DRAM: EDO,4K,60ns */
        
        .long   0xcfafc004, 0x0fafc404, 0x0caf8c04, 0x10af0c04
        .long   0xf0af0c00, 0xf3bf4805, 0xffffc005, 0xffffc005

        .long   0xcfafc004, 0x0fafc404, 0x0caf8c04, 0x00af0c04
        .long   0x07af0c08, 0x0caf0c04, 0x01af0c04, 0x0faf0c08
        .long   0x0caf0c04, 0x01af0c04, 0x0faf0c08, 0x0caf0c04
        .long   0x10af0c04, 0xf0afc000, 0xf3bf4805, 0xffffc005

        .long   0xcfff0004, 0x0fff0404, 0x0cff0c00, 0x13ff4804
        .long   0xffffc004, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xcfff0004, 0x0fff0404, 0x0cff0c00, 0x03ff0c0c
        .long   0x0cff0c00, 0x03ff0c0c, 0x0cff0c00, 0x03ff0c0c
        .long   0x0cff0c00, 0x13ff4804, 0xffffc004, 0xffffc005
        .long   0xffffc005, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xfcffc004, 0xc0ffc004, 0x01ffc004, 0x0fffc004
        .long   0x1fffc004, 0xffffc004, 0xffffc005, 0xffffc005
        .long   0xffffc005, 0xffffc005, 0xffffc005, 0xffffc005

        .long   0xffffc007, 0xffffc007, 0xffffc007, 0xffffc007
#endif
#endif  // OLD/NEW TABLES == CYGPRI_USE_OLD_UPM_TABLES or not.
        // depending on CYGSEM_HAL_ROM_MONITOR and whether RAM
        // start re-initializes.
        
__upmtbl_end:
#endif // CYGPRI_DO_PROGRAM_UPMS
        
FUNC_START(hal_mbx_set_led)
        andi.   r3,r3,0x0e
        lwi     r4,0xfa100001
        stb     r3,0(r4)
        blr
FUNC_END(hal_mbx_set_led)
        
FUNC_START(hal_mbx_flash_led)
        lwi     r4,0xfa100001
    1:  
        li      r5,10
        stb     r5,0(r4)
        
        lis     r5,10
        mtctr   r5
    2:  
        bdnz    2b

        li      r5,12
        stb     r5,0(r4)
        
        lis     r5,10
        mtctr   r5
    3:  
        bdnz    3b
        
        subi    r3,r3,1
        cmpwi   r3,0
        bge     1b

        li      r5,6
        stb     r5,0(r4)

        lis     r5,20
        mtctr   r5
    4:  
        bdnz    4b

        blr
FUNC_END(hal_mbx_flash_led)


#------------------------------------------------------------------------------
# end of mbx.S