URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [powerpc/] [vads/] [v2_0/] [cdl/] [hal_powerpc_vads.cdl] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
# ====================================================================
#
# hal_powerpc_vads.cdl
#
# Motorola MPC8260 Voyager ADS board HAL package configuration data
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
## Copyright (C) 2002 Gary Thomas
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): wpd
# Original data: hmt
# Contributors:
# Date: YYYY-MM-DD
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_HAL_POWERPC_VADS {
display "MPC8260 VADS board"
parent CYGPKG_HAL_POWERPC
requires CYGPKG_HAL_POWERPC_MPC8260
define_header hal_powerpc_vads.h
include_dir cyg/hal
description "
The VADS HAL package provides the support needed to run
eCos on a Mototola MPC8260 VADS board."
compile hal_diag.c hal_aux.c vads.S
implements CYGINT_HAL_DEBUG_GDB_STUBS
# removed by WPD for now
implements CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
# added by WPD for now
# Note: uncomment this to get old-style debug behaviour
# implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT_NOT_GUARANTEED
define_proc {
puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H <pkgconf/hal_powerpc_mpc8260.h>"
puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_powerpc_vads.h>"
puts $::cdl_header "#define HAL_PLATFORM_CPU \"PowerPC MPC8260\""
puts $::cdl_header "#define HAL_PLATFORM_BOARD \"Voyager ADS\""
puts $::cdl_header "#define HAL_PLATFORM_EXTRA \"\""
}
cdl_component CYG_HAL_STARTUP {
display "Startup type"
flavor data
legal_values {"RAM" "ROM"}
default_value {"RAM"}
no_define
define -file system.h CYG_HAL_STARTUP
description "
This option is used to control where the application program will
run, either from RAM or ROM (flash) memory. ROM based applications
must be self contained, while RAM applications will typically assume
the existence of a debug environment, such as GDB stubs."
cdl_option DCSPRI_HAL_VADS_ROM_MLT {
display "Memory Layout for ROM Startup"
flavor data
legal_values {"LOW" "HIGH" "RAM"}
default_value {"HIGH"}
description "
This option selects which memory layout file should be
used when configuring the VADS board for ROM startup.
The LOW option selects the memory layout for an image
stored at the beginning of the FLASH. It should be
used when the (hard reset) IP and boot memory space
are both mapped to address 0.
The HIGH option selects the memory layout for an image
stored in the last Megabyte of FLASH. It should be
used when the (hard reset) IP maps the interrupt
vector base address to 0xFFF00000 and the boot memory
space to the last 32 Megabytes of FLASH.
The RAM option is a hack used to place the ROM image
in RAM in order to simplify the development of a ROM
monitor by using the existing ROM monitor to load it
into RAM, but pretend like it is in ROM."
}
}
cdl_option CYGHWR_HAL_POWERPC_DISABLE_MMU {
display "DISABLE MMU"
flavor bool
default_value 1
# calculated 1
description "
This option will disable the MMU enabled."
}
cdl_option CYGHWR_HAL_POWERPC_BOARD_SPEED {
display "Development board clock speed (MHz)"
flavor data
legal_values 45 60 66
default_value 66
description "
The Delphi TigerSHARC-6 board will probably run at either
45 or 60 MHz. In the short term, however, we will be using
an MPC8260ADS board running at 66 MHz. Select the clock
speed appropriate for your board so that the system can set
the serial baud rate correctly, amongst other things."
}
# Real-time clock/counter specifics
cdl_component CYGNUM_HAL_RTC_CONSTANTS {
display "Real-time clock constants."
description "
Period is busclock/4/CYGNUM_HAL_RTC_DENOMINATOR. VERIFY THIS!!!"
flavor none
no_define
cdl_option CYGNUM_HAL_RTC_NUMERATOR {
display "Real-time clock numerator"
flavor data
calculated 1000000000
}
cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
display "Real-time clock denominator"
flavor data
default_value 100
description "
This option selects the number of system clock 'ticks'
per second. This rate is sometimes known as the heartbeat rate."
}
cdl_option CYGNUM_HAL_RTC_PERIOD {
display "Real-time clock period"
flavor data
calculated { (((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/4)/CYGNUM_HAL_RTC_DENOMINATOR) }
}
}
cdl_component CYGBLD_GLOBAL_OPTIONS {
display "Global build options"
flavor none
description "
Global build options including control over
compiler flags, linker flags and choice of toolchain."
parent CYGPKG_NONE
cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
display "Global command prefix"
flavor data
no_define
default_value { "powerpc-eabi" }
description "
This option specifies the command prefix used when
invoking the build tools."
}
cdl_option CYGBLD_GLOBAL_CFLAGS {
display "Global compiler flags"
flavor data
no_define
default_value { "-msoft-float -mcpu=603e -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
description "
This option controls the global compiler flags which
are used to compile all packages by
default. Individual packages may define
options which override these global flags."
}
cdl_option CYGBLD_GLOBAL_LDFLAGS {
display "Global linker flags"
flavor data
no_define
default_value { "-msoft-float -mcpu=603e -g -nostdlib -Wl,--gc-sections -Wl,-static" }
description "
This option controls the global linker flags. Individual
packages may define options which override these global flags."
}
cdl_option CYGBLD_BUILD_GDB_STUBS {
display "Build GDB stub ROM image"
default_value 0
requires { CYG_HAL_STARTUP == "ROM" }
requires CYGSEM_HAL_ROM_MONITOR
requires CYGBLD_BUILD_COMMON_GDB_STUBS
requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
requires CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
# We don't support GDB BREAK (yet)
# requires ! CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
#
requires CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
no_define
description "
This option enables the building of the GDB stubs for the
board. The common HAL controls takes care of most of the
build process, but the platform CDL takes care of creating
an S-Record data file. -- This needs more work"
make -priority 320 {
<PREFIX>/bin/gdb_module.bin : <PREFIX>/bin/gdb_module.img
$(OBJCOPY) -O srec --srec-forceS3 $< $(@:.bin=.s19)
$(OBJCOPY) -O binary $< $@
# }
# Changed the .srec extentsion to .txt for ease of downloading with hyperterm
# Changed the .txt extentsion to .s19 for ease of downloading with OCD
}
}
cdl_component CYGPKG_HAL_POWERPC_VADS_OPTIONS {
display "MPC8260 VADS build options"
flavor none
description "
Package specific build options including control over
compiler flags used only in building this package,
and details of which tests are built."
cdl_option CYGPKG_HAL_POWERPC_VADS_CFLAGS_ADD {
display "Additional compiler flags"
flavor data
no_define
default_value { "" }
description "
This option modifies the set of compiler flags for
building the VADS HAL. These flags are used in addition
to the set of global flags."
}
cdl_option CYGPKG_HAL_POWERPC_VADS_CFLAGS_REMOVE {
display "Suppressed compiler flags"
flavor data
no_define
default_value { "" }
description "
This option modifies the set of compiler flags for
building the VADS HAL. These flags are removed from
the set of global flags if present."
}
}
cdl_component CYGHWR_MEMORY_LAYOUT {
display "Memory layout"
flavor data
no_define
calculated { CYG_HAL_STARTUP == "RAM" ? "powerpc_vads_ram" : \
"powerpc_vads_rom" }
cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
display "Memory layout linker script fragment"
flavor data
no_define
define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_powerpc_vads_ram.ldi>" : \
DCSPRI_HAL_VADS_ROM_MLT == "LOW" ? "<pkgconf/mlt_powerpc_vads_romlow.ldi>" : \
DCSPRI_HAL_VADS_ROM_MLT == "HIGH" ? "<pkgconf/mlt_powerpc_vads_romhigh.ldi>" : \
"<pkgconf/mlt_powerpc_vads_romram.ldi>" }
}
cdl_option CYGHWR_MEMORY_LAYOUT_H {
display "Memory layout header file"
flavor data
no_define
define -file system.h CYGHWR_MEMORY_LAYOUT_H
calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_powerpc_vads_ram.h>" : \
DCSPRI_HAL_VADS_ROM_MLT == "LOW" ? "<pkgconf/mlt_powerpc_vads_romlow.h>" : \
DCSPRI_HAL_VADS_ROM_MLT == "HIGH" ? "<pkgconf/mlt_powerpc_vads_romhigh.h>" : \
"<pkgconf/mlt_powerpc_vads_romram.h>" }
}
}
cdl_option CYGSEM_HAL_ROM_MONITOR {
display "Behave as a ROM monitor"
flavor bool
default_value 0
parent CYGPKG_HAL_ROM_MONITOR
requires { CYG_HAL_STARTUP == "ROM" }
description "
Enable this option if this program is to be used as a ROM monitor,
i.e. applications will be loaded into RAM on the board, and this
ROM monitor may process exceptions or interrupts generated from the
application. This enables features such as utilizing a separate
interrupt stack when exceptions are generated."
}
cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
display "Work with a ROM monitor"
flavor bool
default_value { (CYG_HAL_STARTUP == "RAM" &&
!CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS &&
!CYGINT_HAL_USE_ROM_MONITOR_UNSUPPORTED &&
!CYGSEM_HAL_POWERPC_COPY_VECTORS) ? 1 : 0 }
parent CYGPKG_HAL_ROM_MONITOR
requires { CYG_HAL_STARTUP == "RAM" }
requires ! CYGSEM_HAL_POWERPC_COPY_VECTORS
requires ! CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
requires ! CYGINT_HAL_USE_ROM_MONITOR_UNSUPPORTED
description "
Allow coexistence with ROM monitor (CygMon or GDB stubs) by
only initializing interrupt vectors on startup, thus leaving
exception handling to the ROM monitor."
}
# FIXME: the option above should be adjusted to select between monitor
# variants
cdl_option CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs {
parent CYGPKG_HAL_ROM_MONITOR
display "Bad CDL workaround"
calculated 1
active_if CYGSEM_HAL_USE_ROM_MONITOR
}
cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
display "Redboot HAL options"
flavor none
no_define
parent CYGPKG_REDBOOT
active_if CYGPKG_REDBOOT
description "
This option lists the target's requirements for a valid Redboot
configuration."
# compile -library=libextras.a redboot_cmds.c
cdl_option CYGBLD_BUILD_REDBOOT_BIN {
display "Build Redboot ROM binary image"
active_if CYGBLD_BUILD_REDBOOT
default_value 1
no_define
description "This option enables the conversion of the Redboot ELF
image to a binary image suitable for ROM programming.
This needs more work."
make -priority 325 {
<PREFIX>/bin/redboot.bin : <PREFIX>/bin/redboot.elf
$(OBJCOPY) --strip-debug $< $(@:.bin=.img)
$(OBJCOPY) -O srec $< $(@:.bin=.srec)
$(OBJCOPY) -O srec --change-address=0x02040000 $< $(@:.bin=.ppcbug)
$(OBJCOPY) -O binary $< $@
}
}
}
}
Go to most recent revision | Compare with Previous | Blame | View Log