Subversion Repositories openrisc_me

##=============================================================================
##
##      viper.S
##
##      VIPER board hardware setup
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
## Copyright (C) 2002 Gary Thomas
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   hmt
## Contributors:hmt, gthomas
## Date:        1999-06-08
## Purpose:     VIPER board hardware setup
## Description: This file contains any code needed to initialize the
##              hardware on a VIPER PPC860 board.
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <pkgconf/hal.h>

#include <cyg/hal/arch.inc>             /* register symbols et al */
#include <cyg/hal/ppc_regs.h>           /* on-chip resource layout, special */
                                        /* registers, IMM layout...         */
#include <cyg/hal/quicc/ppc8xx.h>       /* more of the same */
        
#------------------------------------------------------------------------------
# this is controlled with one define for tidiness:
# (and it is undefined by default)

//#define CYGPRI_RAM_START_PROGRAMS_UPMS

#if defined(CYG_HAL_STARTUP_ROM) \
 || defined(CYG_HAL_STARTUP_ROMRAM) \
 || defined(CYGPRI_RAM_START_PROGRAMS_UPMS)
# define CYGPRI_DO_PROGRAM_UPMS
#endif

/* The intention is that we only set up the UPMs in ROM start, be it actual
 * ROM application start or Stub ROMs that we built from the same sources.
 * 
 * The alternative approach - in which we have reliability doubts - is to
 * program the UPMs with *old* timing data in StubROM start, then
 * *reprogram* them with *new* timing data in RAM start - and of course
 * program with *new* timing data in plain ROM application start.
 * (Re-programming from new to new timing data fails - hence the suspicion
 * of reprogramming _at_all_, hence this private configuration)
 * 
 * With CYGPRI_RAM_START_PROGRAMS_UPMS left undefined, the former behaviour
 * - programming the UPMs exactly once - is obtained.  Define it to get the
 * latter, untrusted behaviour.
 */
        
#------------------------------------------------------------------------------

// LED macro uses r23, r25: r4 left alone
#define LED( x ) \
        lwi     r25,0xFA100018;         \
        lwi     r23,(x);                \
        stb     r23,0(r25)
        
#------------------------------------------------------------------------------
                
FUNC_START( hal_hardware_init )

        # Throughout this routine, r4 is the base address of the control
        # registers.  r3 and r5 are scratch in general.
        
        lwi     r4,CYGARC_REG_IMM_BASE  # base address of control registers
        mtspr   CYGARC_REG_IMMR,r4
        
        LED( 0 )                        # turn all LEDs off
        
#define CACHE_UNLOCKALL         0x0a00
#define CACHE_DISABLE           0x0400
#define CACHE_INVALIDATEALL     0x0c00
#define CACHE_ENABLE            0x0200
#define CACHE_ENABLEBIT         0x8000

#define CACHE_FORCEWRITETHROUGH 0x0100
#define CACHE_NOWRITETHROUGH    0x0300
#define CACHE_CLEAR_LE_SWAP     0x0700

        # DATA CACHE
        mfspr   r3,CYGARC_REG_DC_CST            /* clear error bits */
        lis     r3,CACHE_UNLOCKALL
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* unlock all lines */
        
        lis     r3,CACHE_INVALIDATEALL
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* invalidate all lines */

        lis     r3,CACHE_DISABLE
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* disable */
        
        lis     r3,CACHE_FORCEWRITETHROUGH
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* set force-writethrough mode */

        lis     r3,CACHE_CLEAR_LE_SWAP
        sync
        mtspr   CYGARC_REG_DC_CST,r3            /* clear little-endian swap mode */
        /* (dunno what this is, but it sounds like a bad thing) */
        
        # INSTRUCTION CACHE (no writeback modes)
        mfspr   r3,CYGARC_REG_IC_CST            /* clear error bits */
        lis     r3,CACHE_UNLOCKALL
        mtspr   CYGARC_REG_IC_CST,r3            /* unlock all lines */
        isync
        lis     r3,CACHE_INVALIDATEALL
        mtspr   CYGARC_REG_IC_CST,r3            /* invalidate all lines */
        isync
        lis     r3,CACHE_DISABLE
        mtspr   CYGARC_REG_IC_CST,r3            /* disable */
        isync
        
        sync
        
        LED( 0x01 )
        
        /*
         * SIU Initialization.
         */
        lwi     r3,0x00610400
        stw     r3,SIUMCR(r4)
        
#ifdef CYG_HAL_STARTUP_ROMRAM
// Need to set the PC into the FLASH (ROM) before the address map changes
        lwi     r3,10f
        lwi     r5,0xFE000000
        or      r3,r3,r5
        mtctr   r3
        bctr
10:     
#endif  

        /*
         * Enable bus monitor. Disable Watchdog timer.
         */
        lwi     r3,0xffffff88
        stw     r3,SYPCR(r4)

        /*
         * Clear REFA & REFB. Enable but freeze timebase.
         */
        lwi     r3,0x0000            // FIXME:   should this be 0x0000 or 0x00C2
        sth     r3,TBSCR(r4)

        /*
         * Unlock some RTC registers (see section 5.11.2)
         */
        lwi     r3,0x55ccaa33
        stw     r3,RTCSCK(r4)
        stw     r3,RTCK(r4)
        stw     r3,RTSECK(r4)
        stw     r3,RTCALK(r4)

        /*
         * Clear SERC & ALR. RTC runs on freeze. Enable RTC.
         */
        li      r3,0x0000            // FIXME:   should this be 0x0000 or 0x00C3
        sth     r3,RTCSC(r4)

        /*
         * Clear periodic timer interrupt status.
         * Enable periodic timer and stop it on freeze.
         */
        li      r3,0x0001            // FIXME:   should this be 0x0001 or 0x0083
        sth     r3,PISCR(r4)

        LED( 0x02 )
#ifdef CYGPRI_DO_PROGRAM_UPMS
        /*
         * Perform UPM programming by writing to its 64 RAM locations.
         * Note that UPM initialization must be done before the Bank Register
         * initialization. Otherwise, system may hang when writing to Bank
         * Registers in certain cases.
         */
        lis     r5,__upmtbl_start@h
        ori     r5,r5,__upmtbl_start@l
        lis     r6,__upmtbl_end@h
        ori     r6,r6,__upmtbl_end@l
        sub     r7,r6,r5      /* size of table */ 
        srawi   r7,r7,2       /* in words */
        
        li      r6,0x00000000     /* Command - OP=Write, UPMA, MAD=0 */
    1:
        lwz     r3,0(r5)      /* get data from table */
        stw     r3,MDR(r4)    /* store the data to MD register */
        stw     r6,MCR(r4)    /* issue command to MCR register */
        addi    r5,r5,4       /* next entry in the table */
        addi    r6,r6,1       /* next MAD address */
        cmpw    r6,r7         /* done yet ? */
        blt     1b
#endif // CYGPRI_DO_PROGRAM_UPMS
        LED( 0x12 )

        /*
         * Set refresh timer prescaler to divide by 8.
         */
        li      r3,PTP_DIV32
        sth     r3,MPTPR(r4)

        /*
         * See Table 15-16 MPC860 User's Manual.
         *
// Set the value of Machine A Mode Register (MAMR) to $5E802114.
//      Field PTA (bits 0-7) = 94
//      Field PTAE (bit 8) = 1
//      Field AMA (bits 9-11) = 0
//      Field Reserved (bit 12) = 0
//      Field DSA (bits 13-14) = 0
//      Field Reserved (bit 15) = 0
//      Field G0CLA (bits 16-18) = 1
//      Field GPL_A4DIS (bit 19) = 0
//      Field RLFA (bits 20-23) = 1
//      Field WLFA (bits 24-27) = 1
//      Field TLFA (bits 28-31) = 4
         */

//        
// PTA field is (System Clock in MHz * Refresh rate in us) / Prescale
// e.g.  ((14*3.6864)*62.5)/32 => 100.8 => 101        
//                
#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 47)
#define PLPRCR_PTX 0x00C // (47MHz/3.6864MHz)-1
#define MAMR_PTA 94        
#endif        
#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 51)
#define PLPRCR_PTX 0x00D // (51.6MHz/3.6864MHz)-1
#define MAMR_PTA 101
#endif        
#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 55)
#define PLPRCR_PTX 0x00E // (55.3MHz/3.6864MHz)-1
#define MAMR_PTA 108
#endif        
#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 59)
#define PLPRCR_PTX 0x00F // (58.9MHz/3.6864MHz)-1
#define MAMR_PTA 116
#endif        
#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 63)
#define PLPRCR_PTX 0x010 // (62.7MHz/3.6864MHz)-1
#define MAMR_PTA 123
#endif        
//#define MAMR_PTA (((((((PLPRCR_PTX+1)*3686400)*625)/10000000)+31)/32)&0xFF)
        lwi     r3,0x00802114|(MAMR_PTA<<24)
        stw     r3,MAMR(r4)
        stw     r3,MBMR(r4)

        /*
         * Base Register initialization.
         */

        /* BOOT ROM */
        lwi     r3,0xFE000401   # 8-bit, GPCM
        lwi     r5,0xFF800774   # 7 wait states, up to 8MB
        stw     r3,BR0(r4)
        stw     r5,OR0(r4)

        /* Misc I/O, 16 bit port */
        lwi     r3,0xFA100801
        lwi     r5,0xFFFF8730
        stw     r3,BR2(r4)
        stw     r5,OR2(r4)

        /* ONBOARD DRAM */
        lwi     r3,0x00000081   # 32-bit, UPMA
        lwi     r5,0xFF800E00
        stw     r3,BR1(r4)
        stw     r5,OR1(r4)

        /* DRAM DIMM BANK1 */
        lwi     r3,0x00000080   # 32-bit, UPMA, INVALID
        lwi     r5,0xFFFF87FC
        stw     r3,BR3(r4)
        stw     r5,OR3(r4)

#if 0        
        /* NVRAM */
        lwi     r3,0xfa000401   # 8-bit, GPCM
        lwi     r5,0xffe00930
        stw     r3,BR4(r4)
        stw     r5,OR4(r4)

        /* PCI BRIDGE MEM/IO */
        lwi     r3,0x80000001   # 32-bit, GPCM
        lwi     r5,0xa0000108
        stw     r3,BR5(r4)
        stw     r5,OR5(r4)

        /* PCI BRIDGE REGISTERS */
        lwi     r3,0xfa210001   # 32-bit, GPCM
        lwi     r5,0xffff0108
        stw     r3,BR6(r4)
        stw     r5,OR6(r4)

        /* FLASH */
        lwi     r3,0xfc000001   # 32-bit, GPCM
        lwi     r5,0xff800940
        stw     r3,BR7(r4)
        stw     r5,OR7(r4)
#endif
        
        /*
         *  SYSTEM CLOCK CONTROL REGISTER
// Set the value of System Clock and Reset Control Register (SCCR) to $00400000.
//      Field Reserved (bit 0) = 0
//      Field COM (bits 1-2) = 0
//      Field Reserved (bits 3-5) = 0
//      Field TBS (bit 6) = 0
//      Field RTDIV (bit 7) = 0
//      Field RTSEL (bit 8) = 0
//      Field CRQEN (bit 9) = 1
//      Field PRQEN (bit 10) = 0
//      Field Reserved (bits 11-12) = 0
//      Field EBDF (bits 13-14) = 0
//      Field Reserved (bits 15-16) = 0
//      Field DFSYNC (bits 17-18) = 0
//      Field DFBRG (bits 19-20) = 0
//      Field DFNL (bits 21-23) = 0
//      Field DFNH (bits 24-26) = 0
//      Field Reserved (bits 27-31) = 0
         */
        lwi     r3,0x00400000
        stw     r3,SCCR(r4)
        
        LED( 0x03 )

        /*
         *  PLL, LOW POWER, AND RESET CONTROL REGISTER
// Set the value of PLL, Low Power and Reset Control Register (PLPRCR) to $00C04000.
//      Field MF (bits 0-11) = 12
//      Field Reserved (bits 12-15) = 0
//      Field SPLSS (bit 16) = 0
//      Field TEXPS (bit 17) = 1
//      Field Reserved (bit 18) = 0
//      Field TMIST (bit 19) = 0
//      Field Reserved (bit 20) = 0
//      Field CSRC (bit 21) = 0
//      Field LPM (bits 22-23) = 0
//      Field CSR (bit 24) = 0
//      Field LOLRE (bit 25) = 0
//      Field FIOPD (bit 26) = 0
//      Field Reserved (bits 27-31) = 0
         */
        lwi     r3,0x04000|(PLPRCR_PTX<<20)
        stw     r3,PLPRCR(r4)

        LED(0xE0)
        lwi     r3,0x40000
        mtctr   r3
10:     nop
        bdnz    10b
        LED(0xE1)

        /* SDRAM Initialization Sequence, UPMA, CS1 */
        li      r3,0
        stw     r3,MAR(r4)

        lwi     r3,0x80002115;  /* run precharge from loc 21 (0x15) */
        stw     r3,MCR(r4)

        lwi     r3,0x80002830;  /* run refresh 8 times */
        stw     r3,MCR(r4)
        
        lwi     r3,0x88;        /* MR 88 for high range */
        stw     r3,MAR(r4)

        lwi     r3,0x80002116;  /* run MRS pattern from loc 22 (0x16) */
        stw     r3,MCR(r4)

        # mask interrupt sources in the SIU
        lis     r2,0
        lwi     r3,CYGARC_REG_IMM_SIMASK
        stw     r2,0(r3)

        # set the decrementer to maxint
        lwi     r2,0
        not     r2,r2
        mtdec   r2
        
        # and enable the timebase and decrementer to make sure
        li      r2,1                            # TBEnable and not TBFreeze
        lwi     r3,CYGARC_REG_IMM_TBSCR
        sth     r2,0(r3)

        LED( 8 ) 

#ifdef CYG_HAL_STARTUP_ROM
        # move return address to where the ROM is
        mflr    r3
        lwi     r4,0x00FFFFFF        // CAUTION!! Assumes only low 16M for ROM
        and     r3,r3,r4
        oris    r3,r3,CYGMEM_REGION_rom>>16
        mtlr    r3
#endif

#ifdef CYG_HAL_STARTUP_ROMRAM
        // Copy image from ROM to RAM
        LED(0x10)
        mflr    r3              
        lwi     r4,0xFE000000
        lwi     r5,0x01FFFFFF   // ROM/FLASH base
        and     r3,r3,r5        // segment relative
        lwi     r6,_hal_hardware_init_done
        mtlr    r6
        sub     r6,r3,r6        // Absolute address
        add     r6,r6,r4        // FLASH address
        lwi     r7,0            // where to copy to
        lwi     r8,__ram_data_end
10:     lwz     r5,0(r6)
        stw     r5,0(r7)
        addi    r6,r6,4
        addi    r7,r7,4
        cmplw   r7,r8
        bne     10b
        LED(0x20)
#endif                

        blr
FUNC_END( hal_hardware_init )


#ifdef CYGPRI_DO_PROGRAM_UPMS
# -------------------------------------------------------------------------
# this table initializes the User Programmable Machine (UPM) nastiness
# in the QUICC to control DRAM timing.

__upmtbl_start:
// single read   (offset 0x00 in upm ram)
       .long   0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00
       .long   0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04
// burst read    (offset 0x08 in upm ram)
       .long   0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00
       .long   0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44
       .long   0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35
       .long   0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35
// single write  (offset 0x18 in upm ram)
       .long   0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47
       .long   0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04
// burst write   (offset 0x20 in upm ram)
       .long   0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00
       .long   0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04
       .long   0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04
       .long   0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04
// refresh       (offset 0x30 in upm ram)
       .long   0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04
       .long   0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04
       .long   0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04
// exception     (offset 0x3C in upm ram)
       .long   0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04
__upmtbl_end:
#endif // CYGPRI_DO_PROGRAM_UPMS
        
FUNC_START(hal_viper_set_led)
        lwi     r4,0xFA100018
        stb     r3,0(r4)
        lwi     r5,_hold_led
        stw     r3,0(r5)
        blr
FUNC_END(hal_viper_set_led)
        .data
_hold_led:      
        .long   0
        .text   
        
FUNC_START(hal_viper_get_led)
        lwi     r5,_hold_led
        lwz     r3,0(r5)
        blr
FUNC_END(hal_viper_get_led)
        
FUNC_START(hal_viper_flash_led)
        lwi     r4,0xFA100018
    1:  
        li      r5,10
        stb     r5,0(r4)
        
        lis     r5,10
        mtctr   r5
    2:  
        bdnz    2b

        li      r5,12
        stb     r5,0(r4)
        
        lis     r5,10
        mtctr   r5
    3:  
        bdnz    3b
        
        subi    r3,r3,1
        cmpwi   r3,0
        bge     1b

        li      r5,6
        stb     r5,0(r4)

        lis     r5,20
        mtctr   r5
    4:  
        bdnz    4b

        blr
FUNC_END(hal_viper_flash_led)


#------------------------------------------------------------------------------
# end of viper.S