Subversion Repositories openrisc_2011-10-31

2002-08-06  Gary Thomas  <gary@chez-thomas.org>
2002-08-06  Motoya Kurotsu <kurotsu@allied-telesis.co.jp>       

        * src/ser16c550c.c: I/O channel data can't be constant - contains
        timeout information which can be changed.

2002-05-08  Jesper Skov  <jskov@redhat.com>

        * src/hal_diag.c: Serial register renaming.

2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_sh_sh7729_hs7729pci.cdl: Indicate support of variable baud
        rates.

2001-10-11  Jesper Skov  <jskov@redhat.com>

        * src/hal_diag.c: Fixed warning.

2001-09-25  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h: Removed dummy
        CYGPRI_HAL_INTERRUPT_CONFIGURE_PLF definition.

2001-09-21  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h (CYGPRI_HAL_INTERRUPT_UPDATE_LEVEL_PLF):
        Ignore level vectors.

2001-07-26  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c (hal_platform_init): Use driver API to attach PCI
        arbiter.

2001-07-23  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh7729_hs7729pci.cdl: Increase PLL1 to 4 for faster
        CPU clock.

2001-07-06  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c (hal_platform_init): Always install PCI arbiter.

        * src/smsc37c93x.c: Enable RTC.

2001-07-05  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh7729_hs7729pci.cdl: Set linux exec parameters.

        * include/platform.inc: Fix SD0001 SDRAM setup.

        * src/smsc37c93x.c (cyg_hal_init_superIO): Fixed interrupt setting
        - 32 bit reads swap the two 16 bits words, so my first reading of
        the default setup was wrong.

2001-07-02  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: CYGARC_PHYSICAL_ADDRESS renamed to
        CYGARC_BUS_ADDRESS.
        * include/plf_io.h: Same.

2001-06-29  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h (CYGPRI_HAL_INTERRUPT_ACKNOWLEDGE_PLF): Fix
        typo.

        * src/plf_misc.c: Include new arbiter header.

2001-06-28  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: Set up ISR arbiter for the PCI vector.

        * include/plf_io.h: Added HAL_PCI_TRANSLATE_INTERRUPT.

        * include/plf_intr.h: Added decoded PCI vectors. Added interrupt
        configury extensions. 

2001-06-27  Jesper Skov  <jskov@redhat.com>

        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.mlt: Reserve 128k
        for redBoot.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.h: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.ldi: Same.

        * misc/redboot_RAM.ecm: Added ether driver. Added compression.
        * misc/redboot_ROM.ecm: Same.

        * include/platform.inc: Replace settings with proper values from
        Hitachi boot loader.

        * src/plf_misc.c (cyg_hal_plf_pci_init): Set PCI IO/MEM
        offsets. Set BAR1 to SDRAM start.

        * include/plf_io.h: Set proper PCI memory base. Fix CPU/BUS
        translation macros.

2001-06-26  Jesper Skov  <jskov@redhat.com>

        * misc/redboot_RAM.ecm: Increase stack size to 6kB.
        * misc/redboot_ROM.ecm: Same.

        * include/plf_io.h: Define PCI IO accessor macros (keep commented
        out though since IO mapped access is working now).
        * src/plf_misc.c: PCI IO accessor functions fixed (and commented
        out). Instead of fiddling PCI endian control, set PCI timeout
        values like the Linux kernel, and PCI IO mapped access works.

2001-06-25  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: Call PCI init in RedBoot configs. Added PCI IO
        accessor functions.

        * include/plf_io.h: Define PCI IO accessor macros and CPU/BUS
        translation macros.

        * src/plf_misc.c (cyg_hal_plf_pci_cfg_write_byte): 

        * src/ser16c550c.c: Use magic 16bit access.
        * src/smsc37c93x.c: Same.

        * src/hal_diag.c (cyg_hal_plf_comms_init): Init SuperIO.

2001-06-18  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c (cyg_hal_plf_pci_init): Fiddle PCI setup.

2001-06-17  Jesper Skov  <jskov@redhat.com>

        * src/smsc37c93x.c (cyg_hal_init_superIO): Power up COM ports. Use
        correct offsets. Set interrupt vectors.

        * src/ser16c550c.c: Correct clock and vectors.

        * cdl/hal_sh_sh7729_hs7729pci.cdl: Force LVL irq mode.

        * include/plf_intr.h: Added external interrupts.

2001-05-31  Jesper Skov  <jskov@redhat.com>

        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.h: Added PCI window.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.mlt: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.ldi: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_rom.h:   Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_rom.mlt: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_rom.ldi: Same.

2001-05-30  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c (hal_platform_init): Init SuperIO controller.

        * src/hal_diag.c (cyg_hal_plf_comms_init): Init superIO UARTs (disabled).

        * src/ser16c550c.c: Added.
        * src/smsc37c93x.c: Added.
        * cdl/hal_sh_sh7729_hs7729pci.cdl: Build new files.

        * src/plf_misc.c: Added delays to make PCI config IO work. 

        * include/plf_io.h (HAL_PCI_ALLOC_BASE_MEMORY): Changed - not sure
        if correct. 
        (HAL_PCI_IGNORE_DEVICE): Don't probe anything but PCI bus 0.

2001-05-29  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: Added PCI functions.

        * include/plf_io.h: Added. Contains PCI details.

        * include/platform.inc (BSC_settings_table): Changed to use init
        values as documented by Hitachi.

        * misc/split_words.c: Quick hack to allow splitting of images for
        EPROM programming.

        * misc/redboot_RAM.ecm: Added.
        * misc/redboot_ROM.ecm: Added.

        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.h: Made SDRAM area
        default for memory. Added SRAM1 and SRAM2 areas.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.ldi: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_ram.mlt: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_rom.h:   Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_rom.ldi: Same.
        * include/pkgconf/mlt_sh_sh7729_hs7729pci_rom.mlt: Same.

        * cdl/hal_sh_sh7729_hs7729pci.cdl: Use SDRAM.

2001-05-28  Jesper Skov  <jskov@redhat.com>

        * include/platform.inc (hal_hardware_init): Don't mess with BSC
        stuff in RAM startup.

2001-05-25  Jesper Skov  <jskov@cambridge.redhat.com>

        * New platform HAL.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================