Subversion Repositories openrisc_me

2002-08-06  Gary Thomas  <gary@chez-thomas.org>
2002-08-06  Motoya Kurotsu <kurotsu@allied-telesis.co.jp>       

        * src/ser16c550c.c: I/O channel data can't be constant - contains
        timeout information which can be changed.

2002-05-08  Jesper Skov  <jskov@redhat.com>

        * src/hal_diag.c: Serial register renaming.

2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_sh_sh7751_se7751.cdl: Indicate support of variable baud rates.

2001-09-25  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h: Removed dummy
        CYGPRI_HAL_INTERRUPT_ACKNOWLEDGE_PLF and
        CYGPRI_HAL_INTERRUPT_CONFIGURE_PLF definitions.

2001-07-24  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: Clear interrupt controller registers on startup.

        * include/plf_io.h (HAL_PCI_TRANSLATE_INTERRUPT): Rotate interrupts.

        * include/plf_intr.h (CYGPRI_HAL_INTERRUPT_UPDATE_LEVEL_PLF):
        Added handling for IRL vectors. Name IRL vectors.

        * src/ser16c550c.c: Changed interrupt vector (still unclear if
        it's the right one).

2001-07-17  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh7751_se7751.cdl: Create .eprom.srec version for
        broken Hitachi loader.

        * misc/redboot_ROM.ecm: Enable caching.
        * misc/redboot_RAM.ecm: Same.

        * src/plf_misc.c (hal_platform_init): Initialize
        interrupt controller.
        * include/plf_io.h (HAL_PCI_TRANSLATE_INTERRUPT): Use PCIA-D
        interrupts.
        * include/plf_intr.h: Put in a few guessed interrupts. Probably
        not right.

2001-07-16  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c: Remove unused variables.

        * src/m1543c.c (cyg_hal_init_superIO): Try to init PCI->ISA
        bridge. Not that it makes any sense - I don't see any device 2 in
        the config space, but that's what the Hitachi monitor is
        fiddling. Doesn't make a change though.

2001-07-13  Jesper Skov  <jskov@redhat.com>

        * src/hal_diag.c (cyg_hal_plf_comms_init): Leave out superIO init
        until it's working.

        * src/ser16c550c.c: Adjust offsets.

        * src/m1543c.c (cyg_hal_init_superIO): More setup code.

        * misc/redboot_RAM.ecm: Added eth driver.

2001-07-11  Jesper Skov  <jskov@redhat.com>

        * include/plf_io.h (HAL_PCI_ALLOC_BASE_IO): Moved to 0x2000.
        Scan all busses.

        * include/platform.inc: Fix warning.

2001-07-10  Jesper Skov  <jskov@redhat.com>

        * include/pkgconf/mlt_sh_sh7751_se7751_ram.ldi: Hack in a PCI window.
        * include/pkgconf/mlt_sh_sh7751_se7751_ram.mlt: Hack in a PCI window.
        * include/pkgconf/mlt_sh_sh7751_se7751_ram.h: Hack in a PCI window.

        * include/plf_io.h (HAL_PCI_PHYSICAL_IO_BASE): zeroed since all IO
        happens via functions.

        * cdl/hal_sh_sh7751_se7751.cdl: Want LE configurations.

        * include/plf_io.h: Leave PCI IO space for super IO controller.

        * cdl/hal_sh_sh7751_se7751.cdl: Compile m1543c file.
        * src/m1543c.c: added.

        * src/ser16c550c.c: Changed addresses and setup code (still not
        working).

        * src/plf_misc.c (hal_platform_init): Init super IO
        controller. Init PCI.

        * src/hal_diag.c (cyg_hal_plf_comms_init): Also set up COM2.

        * src/plf_misc.c: Call PCI init during startup.

        * include/plf_io.h: Added PCI definitions.

2001-07-09  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh7751_se7751.cdl: Removed superIO file, set default
        mode.

2001-07-09  Jesper Skov  <jskov@cambridge.redhat.com>

        * New platform HAL.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================