Subversion Repositories openrisc_me

2002-08-06  Gary Thomas  <gary@chez-thomas.org>
2002-08-06  Motoya Kurotsu <kurotsu@allied-telesis.co.jp>       

        * src/ser16c550c.c: I/O channel data can't be constant - contains
        timeout information which can be changed.

2002-05-08  Jesper Skov  <jskov@redhat.com>

        * src/hal_diag.c: Serial register renaming.

2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_sh_sh77x9_se77x9.cdl: Indicate support of variable baud rates.

2001-10-18  Jesper Skov  <jskov@redhat.com>

        * src/plf_misc.c (hal_platform_init): Fix option spelling.

        * cdl/hal_sh_sh77x9_se77x9.cdl: Fix SuperIO CDL option mistake.

2001-10-16  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh77x9_se77x9.cdl: Removed DP83902A hack.

2001-10-15  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh77x9_se77x9.cdl: Additional requirements to work
        around problem of inferred values.
        Added DP83902A hack.

        * src/ser16c550c.c: Get serial controller details from CDL.

        * src/plf_misc.c (hal_platform_init): Only call SuperIO init
        function if required.

        * include/platform.inc (BSC_settings_table): Initialize for DRAM
        or SDRAM - but crudely so. Proper configury will be needed
        eventually, when it's clear how much the SE77X9 boards actually
        differ.

        * cdl/hal_sh_sh77x9_se77x9.cdl: Added SE7709RP01 platform
        support. Added XTAL default option. Added options for serial
        controller. Added crude option for DRAM/SDRAM. Added option for
        SuperIO.

2001-09-25  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h: Removed dummy
        CYGPRI_HAL_INTERRUPT_ACKNOWLEDGE_PLF and
        CYGPRI_HAL_INTERRUPT_CONFIGURE_PLF definitions.

2001-09-13  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh77x9_se77x9.cdl: Add CPU option.

2001-09-12  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h: Added interrupt controller support.

2001-07-27  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh77x9_se77x9.cdl: Generate .eprom.srec of RedBoot
        image.

2001-06-28  Jesper Skov  <jskov@redhat.com>

        * include/pkgconf/mlt_sh_sh77x9_se77x9_ram.ldi: Leave 128k for
        RedBoot.
        * include/pkgconf/mlt_sh_sh77x9_se77x9_ram.mlt: Same.
        * include/pkgconf/mlt_sh_sh77x9_se77x9_ram.h: Same.

        * misc/redboot_RAM.ecm: Added compression.
        * misc/redboot_ROM.ecm: Same.

        * cdl/hal_sh_sh77x9_se77x9.cdl: Don't make relocated .srec file.

2001-06-26  Jesper Skov  <jskov@redhat.com>

        * misc/redboot_RAM.ecm: Reduced stacksize to 6kB.
        * misc/redboot_ROM.ecm: Same.

2001-06-25  Jesper Skov  <jskov@redhat.com>

        * misc/redboot_RAM.ecm: Updated stack size.
        * misc/redboot_ROM.ecm: Same.

2001-06-22  Jesper Skov  <jskov@redhat.com>

        * include/platform.inc (SDMR): Fiddled.

2001-06-19  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh_sh77x9_se77x9.cdl: Our board has a 7709S CPU.

        * misc/redboot_ROM.ecm: Don't include CPU variant details.
        * misc/redboot_RAM.ecm: Same.

2001-06-17  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h: Renamed serial interrupts.

        * src/smsc37c93x.c (cyg_hal_init_superIO): Power on COM1. Use
        correct interrupt.

        * src/ser16c550c.c: Got it enabled. Correct offset and clock.

        * src/hal_diag.c (cyg_hal_plf_comms_init): SuperIO working.

2001-06-16  Jesper Skov  <jskov@redhat.com>

        * include/plf_intr.h: Define external interrupts.

        * misc/redboot_ROM.ecm: Added eth driver.
        * misc/redboot_RAM.ecm: Same.

        * cdl/hal_sh_sh77x9_se77x9.cdl: Force IRL interrupt mode. Separate
        srec output rules for Hitachi Mon (which needs reloc) and for
        normal RedBoot use.

2001-06-12  Jesper Skov  <jskov@redhat.com>

        * src/smsc37c93x.c: Use 16bit writes.

        * src/ser16c550c.c: Update to access by 16bit units. Can't get it
        to work though.

        * cdl/hal_sh_sh77x9_se77x9.cdl: Only two serial channels.
        * src/hal_diag.c: Same.

2001-06-12  Jesper Skov  <jskov@cambridge.redhat.com>

        * New platform HAL.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================