URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [sparclite/] [sleb/] [v2_0/] [include/] [halboot.si] - Rev 565
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef CYGONCE_HAL_HALBOOT_SI /* -*-asm-*- */
#define CYGONCE_HAL_HALBOOT_SI
// ====================================================================
//
// <platform>/halboot.si
//
// HAL bootup platform-oriented code (assembler)
//
// ====================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
// ====================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): hmt
// Contributors: hmt
// Date: 1999-02-01
// Purpose: Bootup code, platform oriented.
// Description:
//
//####DESCRIPTIONEND####
//
// ====================================================================
// External Platform Initial Setup
//
// This should set up RAM and caches, and calm down any external
// interrupt sources.
//
// It is just plain included in vectors.S
//
// RAM has not yet been touched at all; in fact all you have is a
// register window selected.
#ifdef CYG_HAL_STARTUP_RAM
! Hit the entry point instructions in situ
#ifndef CYGIMP_HAL_SPARCLITE_COPY_VECTORS_TO_RAM
! *unless* we are going to copy into a different RAM area anyway:
! copy the real instructions into the vector:
rd %tbr, %g1
andn %g1, 0xfff, %g1 ! clear non-address bits
set real_vector_instructions, %l0
ld [ %l0 ], %l1
st %l1, [ %g1 ] ! into the vector
ld [ %l0 + 4 ], %l1
st %l1, [ %g1 + 4 ] ! into the vector
! then invalidate the instruction cache:
set 3, %l0
set 0x00001000, %l1
set 0x80001000, %l2
sta %l0, [ %l1 ] 0x0c
sta %l0, [ %l2 ] 0x0c
! and the data cache
sta %l0, [ %l1 ] 0x0e
sta %l0, [ %l2 ] 0x0e
nop
nop
nop
nop ! should be enough
#endif // !CYGIMP_HAL_SPARCLITE_COPY_VECTORS_TO_RAM
#endif // CYG_HAL_STARTUP_RAM
#include <cyg/hal/hal_cpu.h> // a copy of CygMon~s cpu.h
/* Address of clock switch */
#define CLKSW_ADDR 0x01000003
/* Address of SW1 */
#define SW1_ADDR 0x02000003
/* Address of LED bank */
#define LED_ADDR 0x02000003
#define SRAM_BASE 0x30000000
#define SRAM_END 0x30080000
#define DRAM_BASE 0x04000000 /* base of system DRAM */
#define CS3_BASE 0x00000000 /* base of internal resource regs */
#define CS3_ASI 7 /* ASI of internal resource regs */
// DRAM_BASE2 is defined so that we run the same RAM-sizing code in both
// RAM and ROM startup versions; but the RAM startup one starts RAM sizing
// at 0x043ff000 ie. 4k down from the top of the 4M available.
#ifdef CYG_HAL_STARTUP_RAM
#define DRAM_BASE2 DRAM_BASE + 0x00400000 - 0x1000
#else
#define DRAM_BASE2 DRAM_BASE
#endif
.macro led val
sethi %hi(LED_ADDR),%l7
set \val,%l6
not %l6, %l6
stb %l6,[%l7 + %lo(LED_ADDR)]
.endm
/*
* First, setup chip selects.
*
* NB: The AMR_VAL macro actually inverts the mask bits. For me, it is
* more natural to write a 1 bit where I want the address compared.
* The sparc registers use 0 bits, instead.
*/
/* -CS0 ADDR_MASK:0xfc000000 ASI_MASK:0xfc */
set AMR_VAL(0xfc,0xfc000000),%l0
mov AMR0,%l1
sta %l0,[%l1] 1
/* -CS1 BASE:0x10000000 ASI:4 */
set ARSR_VAL(4,0x10000000),%l0
mov ARSR1,%l1
sta %l0,[%l1] 1
/* -CS1 ADDR MASK:0xf0000000 ASI MASK:0x7 */
set AMR_VAL(7,0xf0000000),%l0
mov AMR1,%l1
sta %l0,[%l1] 1
/* -CS2 BASE:0x20000000 ASI:4 */
set ARSR_VAL(4,0x20000000), %l0
mov ARSR2,%l1
sta %l0,[%l1] 1
/* -CS2 ADDR MASK:0xf0000000 ASI MASK:0x7 */
set AMR_VAL(7,0xf0000000),%l0
mov AMR2,%l1
sta %l0,[%l1] 1
/* -CS3 BASE:CS3_BASE ASI:CS3_ASI */
set ARSR_VAL(CS3_ASI,CS3_BASE),%l0
mov ARSR3,%l1
sta %l0,[%l1] 1
/* -CS3 ADDR MASK:0xffff0000 ASI MASK:0x7 */
set AMR_VAL(7,0xffff0000),%l0
mov AMR3,%l1
sta %l0,[%l1] 1
/* -CS4 BASE: DRAM_BASE ASI:0xb */
set ARSR_VAL(0xb,DRAM_BASE),%l0
mov ARSR4,%l1
sta %l0,[%l1] 1
/* -CS4 ADDR MASK:0xfc000000 ASI MASK:0xfc */
set AMR_VAL(0xfc,0xfc000000),%l0
mov AMR4,%l1
sta %l0,[%l1] 1
/* -CS5 BASE:0x30000000 ASI:0xb */
set ARSR_VAL(0xb,0x30000000),%l0
mov ARSR5,%l1
sta %l0,[%l1] 1
/* -CS5 ADDR MASK:0xfff80000 ASI MASK:0xfc */
set AMR_VAL(0xfc,0xfff80000),%l0
mov AMR5,%l1
sta %l0,[%l1] 1
/*
* Setup wait states. Each wait state register sets the wait states for
* a pair of chip selects. The lower bits hold the wait state info for
* the lower numbered chip select.
*/
/* -CS0: 5 wait states, -CS1: 7 wait states */
// set WSSR_VAL(7,7,WSSR_WAITEN,5,5,WSSR_WAITEN),%l0
// set WSSR_VAL(4,4,WSSR_WAITEN,5,5,WSSR_WAITEN),%l0 // FOUR -> CS1
set WSSR_VAL(10,10,WSSR_WAITEN,5,5,WSSR_WAITEN),%l0 // TEN -> CS1
mov WSSR0,%l1
sta %l0,[%l1] 1
/* -CS2: wait states disabled, -CS3: wait states disabled */
set WSSR_VAL(0,0,0,0,0,0),%l0
mov WSSR1,%l1
sta %l0,[%l1] 1
/* -CS4: wait states disabled, -CS5: 0 wait states */
set WSSR_VAL(0,0,WSSR_WAITEN|WSSR_OVERRIDE,0,0,0),%l0
mov WSSR2,%l1
sta %l0,[%l1] 1
led 0x10
/* clear cache/BIU control register */
mov CBIR,%l1
sta %g0,[%l1] 1
/* Read clock switch to determine the value of the refresh timer */
sethi %hi(CLKSW_ADDR),%l1
ldub [%l1 + %lo(CLKSW_ADDR)],%l0
btst 0x80,%l0
bne,a 1f
mov 10,%l0 /* force to 10MHz if CLKSW-8 is ON */
1:
umul %l0,15,%l0
mov DRLD,%l1
sta %l0,[%l1] 1
mov REFTMR,%l1
sta %l0,[%l1] 1
/* read SW1 to get DRAM page size */
sethi %hi(SW1_ADDR),%l1
ldub [%l1 + %lo(SW1_ADDR)],%l0
btst 0x10,%l0
be,a 1f
mov 0x0e,%l0 /* 1K page if branch taken (SW1-5 is OFF) */
mov 0x06,%l0 /* 2K page (SW1-5 is OFF) */
1:
mov SPGMR,%l1
sta %l0,[%l1] 1
led 0x20
#ifdef CYG_HAL_STARTUP_ROM
/* Turn on all system services */
mov SSCR_TIMER|SSCR_WAIT|SSCR_CS|SSCR_SAMEPG,%l0
mov SSCR,%l1
sta %l0,[%l1] 1
nop
nop
nop
nop
#endif
led 0x30
/*
* Initialize caches.
*/
sethi %hi(0x1000),%l0 /* bank 1 invalidate */
sethi %hi(0x80000000),%l1 /* bank 2 invalidate */
mov 3,%l2 /* clear lock, lru, and valid bits */
sta %l2,[%l0] 0xc /* do it - icache bank 1 */
sta %l2,[%l0] 0xe /* do it - dcache bank 1 */
sta %l2,[%l0 + %l1] 0xc /* do it - icache bank 2 */
sta %l2,[%l0 + %l1] 0xe /* do it - dcache bank 2 */
/* now, enable caches and buffers */
mov CBIR_ICEN|CBIR_DCEN|CBIR_PBEN|CBIR_WBEN,%l0
mov CBIR,%l1
sta %l0,[%l1] 1
nop
nop
nop
nop
/* enable data and insn bursts */
mov BCR_IBE|BCR_DBE,%l0
mov BCR,%l1
sta %l0,[%l1] 1
nop
nop
nop
nop
/*
* DRAM setup/test.
*/
led 0x40
/*
* Test SW1-7 to determine normal or EDO mode.
* SW1-7 ON = EDO
* SW1-7 OFF = Normal.
*/
sethi %hi(SW1_ADDR),%l1
ldub [%l1 + %lo(SW1_ADDR)],%l7
mov DBANKR_SA04,%l0 /* DRAM starts at 0x04000000 */
btst 0x40,%l7
bne 1f /* branch if SW1-7 is OFF */
mov SSCR_DRAM,%l1
/* EDO DRAM, enable burst in SSCR and EDO in DBANKR */
or %l1,SSCR_BURST,%l1
or %l0,DBANKR_EDO,%l0
1:
/*
* Now, test SW1 to get DRAM page and bank size.
* SW1-5 ON = 2k page, 16MB bank. (up to 64MB total)
* SW1-5 OFF = 1k page, 4MB bank. (up to 16MB total)
*/
btst 0x10,%l7
bne,a 1f /* branch if OFF */
or %l0,DBANKR_4M|DBANKR_CA10,%l0 /* 1K page */
or %l0,DBANKR_16M|DBANKR_CA11,%l0 /* 2K page */
1:
mov CS3_BASE+DBANKR,%l2
sta %l0,[%l2] CS3_ASI
mov DTIMR_RPS2|DTIMR_CBR3|DTIMR_CAS2|DTIMR_RP2,%l0
mov CS3_BASE+DTIMR,%l2
sta %l0,[%l2] CS3_ASI
mov SSCR,%l2
lda [%l2] 1, %l0
or %l0,%l1,%l0
sta %l0,[%l2] 1
/*
* Test SW1 to get potential DRAM limit.
* SW1-5 ON = 2k page, up to 64MB total
* SW1-5 OFF = 1k page, up to 16MB total
*/
btst 0x10,%l7
bne,a 1f /* branch if OFF */
sethi %hi(DRAM_BASE + 16*1024*1024),%l0
sethi %hi(DRAM_BASE + 64*1024*1024),%l0
1:
/* subtract 4 to get last valid DRAM address */
add %l0,-4,%l0
/* Assume maximim memory and fill with pattern */
set DRAM_BASE2,%l2
set 0xaaaaaaaa,%l3
1:
st %l3,[%l2]
cmp %l2,%l0
blt 1b
add %l2,4,%l2
/*
* Go back, read data and compare with written data.
* Fill in with zero as we go along.
*/
set DRAM_BASE2,%l2
1:
ld [%l2],%l4
cmp %l4,%l3
bne 2f
st %g0,[%l2]
cmp %l2,%l0
blt,a 1b
add %l2,4,%l2
2:
led 0x50
sub %l2,64,%i6
sethi %hi(DRAM_BASE),%l1
sub %l2,%l1,%l0
st %l0,[%i6]
// NOTE that here, the frame pointer is set up to the top of RAM minus a
// little bit with the size of RAM at %fp (%i6)
#ifdef CYGIMP_HAL_SPARCLITE_COPY_VECTORS_TO_RAM
led 0x58
! copy the trampoline code into the base of RAM (__ram_vectors_start)
! including the two ~rogue~ instructions...
.extern __ram_vectors_start
! Using the true address here for the copy makes a badly-aligned
! __ram_vectors less likely to hide as an obscure failure:
set __ram_vectors_start, %l0 ! get the start of RAM
set rom_vectors, %l1 ! get the start of the trampoline
set rom_vectors_end, %l2 ! ...and its end.
33:
ldd [ %l1 ], %l4 ! also uses %l5
std %l4, [ %l0 ]
inc 8, %l1
inc 8, %l0
cmp %l1, %l2
bl 33b
nop
led 0x59
sethi %hi(__ram_vectors_start), %g1 ! get the start of RAM
andn %g1, 0xfff, %g1
set real_vector_instructions, %l0
ld [ %l0 ], %l1
st %l1, [ %g1 ] ! into the vector
ld [ %l0 + 4 ], %l1
st %l1, [ %g1 + 4 ] ! into the vector
led 0x5a
! then invalidate the instruction cache:
set 3, %l0
set 0x00001000, %l1
set 0x80001000, %l2
sta %l0, [ %l1 ] 0x0c
sta %l0, [ %l2 ] 0x0c
led 0x5b
! and the data cache
sta %l0, [ %l1 ] 0x0e
sta %l0, [ %l2 ] 0x0e
nop
nop
nop
nop ! should be enough
led 0x5c
! and (re)set the tbr, finally.
sethi %hi(__ram_vectors_start), %g1
andn %g1, 0xfff, %g1
wr %g1, %tbr ! Traps are at RAM start
nop ! (__ram_vectors_start)
nop
nop
led 0x5d
#else
led 0x5f
#endif // CYGIMP_HAL_SPARCLITE_COPY_VECTORS_TO_RAM (was CYG_HAL_STARTUP_ROM)
! turn on caches - copied from the book
#define set_size 64
#define ini_tag 0
#define adr1 0x00000000
#define adr2 0x80000000
#define step 16
#define CTL_BITS 0x35
set set_size, %l7
set adr1, %o1
set adr2, %o2
set ini_tag, %l0
10:
sta %l0, [ %o1 ] 0x0c
sta %l0, [ %o1 ] 0x0e
sta %l0, [ %o2 ] 0x0c
sta %l0, [ %o2 ] 0x0e
add %o1, step, %o1
subcc %l7, 1, %l7
bne 10b
add %o2, step, %o2
set 0, %l1
set CTL_BITS, %l2
sta %l2, [ %l1 ] 0x01
nop
nop
nop
nop ! delay to let caches stabilize
led 0x60
// Now set up the 86940
#define TRGM0 0
#define TRGM1 4
#define REQSNS 8
#define REQCLR 12
#define IMASK 16
#define IRLAT 20
#define IMODE 24
sethi %hi( 0x10000000 ), %l1 ! base address of the 86940 companion
set 0xfffe0000, %l4 ! mask all intrs
add %l1, IMASK, %l3
sta %l4, [ %l3 ] 4
set 0x11400000, %l6 ! Channels 14,12,11 into Active Low
add %l1, TRGM0, %l3
sta %l6, [ %l3 ] 4
set 0x05100000, %l6 ! Channels 5,4,2 into Active Low
add %l1, TRGM1, %l3
sta %l6, [ %l3 ] 4
add %l1, REQCLR, %l3 ! clear all pending intrs
sta %l4, [ %l3 ] 4
set 0x00100000, %l6 ! clear the latch
add %l1, IRLAT, %l3
sta %l6, [ %l3 ] 4
nop
nop
nop
led 0x70
#endif /* CYGONCE_HAL_HALBOOT_SI */
/* EOF halboot.si */
Go to most recent revision | Compare with Previous | Blame | View Log