Subversion Repositories openrisc_me

# ====================================================================
#
#      io_serial.cdl
#
#      eCos IO configuration data
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  gthomas
# Contributors:
# Date:           1999-07-07
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_IO_SERIAL {
    display       "Serial device drivers"
    active_if     CYGPKG_IO
    requires      CYGPKG_ERROR
    include_dir   cyg/io
    description   "
        This option enables drivers for basic I/O services on
        serial devices."
    doc           ref/io.html

    compile       -library=libextras.a common/serial.c
 
    define_proc {
        puts $::cdl_header "/***** proc output start *****/"
        puts $::cdl_header "#include <pkgconf/system.h>"
        puts $::cdl_header "#ifdef CYGDAT_IO_SERIAL_DEVICE_HEADER"
        puts $::cdl_header "# include CYGDAT_IO_SERIAL_DEVICE_HEADER"
        puts $::cdl_header "#endif "
        puts $::cdl_header "/****** proc output end ******/"
    }

    cdl_option CYGOPT_IO_SERIAL_SUPPORT_NONBLOCKING {
        display       "Support non-blocking read and write calls"
        default_value 0
        description   "
            This option enables extra code in the generic serial driver
            which allows clients to switch read() and write() call
            semantics from blocking to non-blocking."
    }

    cdl_interface CYGINT_IO_SERIAL_BLOCK_TRANSFER {
        display       "Driver requires block transfer callback functions"
        description   "
            Some low-level drivers can be optimized to transfer blocks
            of data instead of a single character at a time. These usually
            rely on a hardware FIFO of some sort."
    }

    cdl_interface CYGINT_IO_SERIAL_LINE_STATUS_HW {
        display "Serial driver supports line status"
    }

    cdl_option CYGOPT_IO_SERIAL_SUPPORT_LINE_STATUS {
        display       "Support line status callbacks"
        requires      { CYGINT_IO_SERIAL_LINE_STATUS_HW > 0 }
        default_value { 0 != CYGINT_IO_SERIAL_LINE_STATUS_HW }
        description "
            This option indicates that if the serial driver supports it,
            serial line status and modem status information should be
            propagated to higher layers via callbacks."
    }

    cdl_component CYGPKG_IO_SERIAL_FLOW_CONTROL {
        display           "Flow control"
        description       "
                This component contains options related to flow control."
        flavor            bool
        requires          (CYGOPT_IO_SERIAL_FLOW_CONTROL_SOFTWARE || \
                           CYGOPT_IO_SERIAL_FLOW_CONTROL_HW)
        default_value     0

        cdl_component CYGOPT_IO_SERIAL_FLOW_CONTROL_SOFTWARE {
                display       "Software flow control"
                default_value 1
                description   "
                        This component enables support of software flow control."

                cdl_option CYGDAT_IO_SERIAL_FLOW_CONTROL_XON_CHAR {
                    display       "Start character"
                    flavor        data
                    default_value 17
                    legal_values  0 to 255
                    description   "
                        This option specifies the ascii character used to
                        indicate that transmission should start."
                }

                cdl_option CYGDAT_IO_SERIAL_FLOW_CONTROL_XOFF_CHAR {
                    display       "Stop character"
                    flavor        data
                    default_value 19
                    legal_values  0 to 255
                    description   "
                        This option specifies the ascii character used to
                        indicate that transmission should stop."
                }
        }

        cdl_option CYGOPT_IO_SERIAL_FLOW_CONTROL_HW {
                display       "Hardware flow control"
                active_if     { CYGINT_IO_SERIAL_FLOW_CONTROL_HW > 0 }
                requires      { CYGINT_IO_SERIAL_FLOW_CONTROL_HW > 0 }
                requires      CYGOPT_IO_SERIAL_SUPPORT_LINE_STATUS
                default_value { CYGINT_IO_SERIAL_FLOW_CONTROL_HW > 0 ? \
                                CYGOPT_IO_SERIAL_SUPPORT_LINE_STATUS : 0 }
                description   "
                        If the hardware supports it, this option allows hardware
                        flow control to be enabled. This may be in the form of
                        either or both of RTS/CTS, or DSR/DTR flow control."
        }

        cdl_interface CYGINT_IO_SERIAL_FLOW_CONTROL_HW {
                display "Serial h/w supports hardware flow control"
        }

        cdl_option CYGDAT_IO_SERIAL_FLOW_CONTROL_DEFAULT {
                display       "Default flow control method"
                flavor        data
                legal_values  { "NONE" "XONXOFF" "RTSCTS" "DSRDTR" }
                default_value { "NONE" }
                description   "This option allows a default flow control method
                               to be defined. Combinations of flow control methods
                               may also be set, but this is only possible by
                               using the cyg_io_set_config() API in source code."
        }

        cdl_option CYGNUM_IO_SERIAL_FLOW_CONTROL_LOW_WATER_PERCENT {
                display       "Rx flow control low water mark"
                flavor        data
                legal_values  1 to 100
                default_value 33
                description   "This sets the water mark used for determining
                               when to disable flow control, expressed
                               as a percentage of the buffer size. When the
                               receive buffer size is lower than this percentage,
                               if the transmitter had previously been throttled, it
                               will now be informed it can restart."
        }

        cdl_option CYGNUM_IO_SERIAL_FLOW_CONTROL_HIGH_WATER_PERCENT {
                display       "Rx flow control high water mark"
                flavor        data
                legal_values  1 to 100
                default_value 66
                requires      { CYGNUM_IO_SERIAL_FLOW_CONTROL_HIGH_WATER_PERCENT >= \
                                CYGNUM_IO_SERIAL_FLOW_CONTROL_LOW_WATER_PERCENT }
                description   "This sets the water mark used for determining
                               when to enable flow control, expressed
                               as a percentage of the buffer size. When the
                               receive buffer size exceeds this percentage,
                               signals are sent to the transmitter to tell it
                               to throttle tranmission."
        }

    }

    cdl_component CYGPKG_IO_SERIAL_TTY {
        display       "TTY-mode serial device drivers"
        flavor        bool
        default_value 1
        description   "
            This option enables a simple terminal-like device driver 
            that can be used for serial devices that interact with humans,
            such as a system console."
        
        script        tty.cdl
        compile       -library=libextras.a common/tty.c
    }

    cdl_component CYGPKG_IO_SERIAL_TERMIOS {
        display       "Termios compatible TTY drivers"
        flavor        bool
        requires      CYGPKG_ISOINFRA
        requires      CYGPKG_IO_FILEIO
        requires      CYGINT_ISO_ERRNO_CODES
        requires      CYGINT_ISO_ERRNO
        requires      CYGINT_ISO_MALLOC
        default_value { 0 != CYGPKG_ISOINFRA && 0 != CYGPKG_IO_FILEIO && \
                        0 != CYGINT_ISO_ERRNO_CODES && \
                        0 != CYGINT_ISO_ERRNO }
        implements    CYGINT_ISO_TERMIOS
        description   "
            This option enables terminal drivers compatible with
            POSIX termios."
        
        script        termios.cdl
        compile       common/termios.c
    }

    cdl_component CYGPKG_IO_SERIAL_DEVICES {
        display       "Hardware serial device drivers"
        flavor        bool
        default_value 0
        description   "
            This option enables the hardware device drivers
            for the current platform."
    }

    cdl_option CYGBLD_IO_SERIAL_EXTRA_TESTS {
        display "Build extra serial tests"
        default_value 0
        no_define
        description "
            This option enables the building of some extra tests which
            can be used when testing / debugging serial drivers. These
            are not built by default since they do not use the dedicated
            testing infrastructure."

        make -priority 320 {
            <PREFIX>/bin/serial_echo : <PACKAGE>/tests/serial_echo.c
            @sh -c "mkdir -p tests $(dir $@)"
            $(CC) -c $(INCLUDE_PATH) -Wp,-MD,deps.tmp -I$(dir $<) $(CFLAGS) -o tests/serial_echo.o $<
            @echo $@ ": \\" > $(notdir $@).deps
            @echo $(wildcard $(PREFIX)/lib/*) " \\" >> $(notdir $@).deps
            @tail +2 deps.tmp >> $(notdir $@).deps
            @echo >> $(notdir $@).deps
            @rm deps.tmp
            $(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o $@ tests/serial_echo.o
        }
    }

    cdl_component CYGPKG_IO_SERIAL_OPTIONS {
        display "Serial device driver build options"
        flavor  none
        description   "
            Package specific build options including control over
            compiler flags used only in building this package,
            and details of which tests are built."


        cdl_option CYGPKG_IO_SERIAL_CFLAGS_ADD {
            display "Additional compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the serial device drivers. These flags are used in addition
                to the set of global flags."
        }

        cdl_option CYGPKG_IO_SERIAL_CFLAGS_REMOVE {
            display "Suppressed compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the serial device drivers. These flags are removed from
                the set of global flags if present."
        }

        cdl_option CYGPKG_IO_SERIAL_TESTS {
            display "Serial device driver tests"
            flavor  data
            no_define
            calculated { CYGPKG_IO_SERIAL_DEVICES ? "tests/serial1 tests/serial2 tests/serial3 tests/serial4 tests/serial5 tests/tty1 tests/tty2 tests/flow1 tests/flow2" : "" }
            description   "
                This option specifies the set of tests for the serial device drivers."
        }
    }

    cdl_option CYGPKG_IO_SERIAL_SELECT_SUPPORT {
        display "Enable serial device select support"
        flavor bool
        active_if CYGPKG_IO_FILEIO
        requires  CYGPKG_IO_FILEIO
        default_value 1
        description "
            This option enables support for the select() API function on all
            serial devices."
    }

    # These could be regular define_proc outputs, but keeping them as
    # CDL interfaces allow us to possibly skip building/running some
    # tests.
    cdl_component CYGPKG_IO_SERIAL_TEST_SPECS {
        display "Serial testing specification"
        flavor     bool
        calculated 1
        no_define
       
        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_9600 {
            display "Skip 9600 baud testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_14400 {
            display "Skip 14400 baud testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_19200 {
            display "Skip 19200 baud testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_38400 {
            display "Skip 38400 baud testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_57600 {
            display "Skip 57600 baud testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_115200 {
            display "Skip 115200 baud testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_PARITY_EVEN {
            display "Skip even-parity testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_PARITY_ODD {
            display "Skip odd-parity testing"
        }

        cdl_interface CYGINT_IO_SERIAL_TEST_SKIP_STOP_2 {
            display "Skip 2-stop bit testing"
        }
    }
}

# EOF io_serial.cdl