OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [net/] [bsd_tcpip/] [v2_0/] [include/] [netinet6/] [ip6_fw.h] - Rev 279

Go to most recent revision | Compare with Previous | Blame | View Log

//==========================================================================
//
//      include/netinet6/ip6_fw.h
//
//==========================================================================
//####BSDCOPYRIGHTBEGIN####
//
// -------------------------------------------
//
// Portions of this software may have been derived from OpenBSD, 
// FreeBSD or other sources, and are covered by the appropriate
// copyright disclaimers included herein.
//
// Portions created by Red Hat are
// Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
//
// -------------------------------------------
//
//####BSDCOPYRIGHTEND####
//==========================================================================
 
/*	$KAME: ip6_fw.h,v 1.9 2001/08/01 04:29:57 sumikawa Exp $	*/
 
/*
 * Copyright (C) 1998, 1999, 2000 and 2001 WIDE Project.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the project nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
 
/*
 * Copyright (c) 1993 Daniel Boulet
 * Copyright (c) 1994 Ugen J.S.Antsilevich
 *
 * Redistribution and use in source forms, with and without modification,
 * are permitted provided that this entire comment appears intact.
 *
 * Redistribution in binary form may occur without any restrictions.
 * Obviously, it would be nice if you gave credit where credit is due
 * but requiring it would be too onerous.
 *
 * This software is provided ``AS IS'' without any warranties of any kind.
 *
 */
 
#ifndef _IP6_FW_H
#define _IP6_FW_H
 
#include <net/if.h>
 
/*
 * This union structure identifies an interface, either explicitly
 * by name or implicitly by IP address. The flags IP_FW_F_IIFNAME
 * and IP_FW_F_OIFNAME say how to interpret this structure. An
 * interface unit number of -1 matches any unit number, while an
 * IP address of 0.0.0.0 indicates matches any interface.
 *
 * The receive and transmit interfaces are only compared against the
 * the packet if the corresponding bit (IP_FW_F_IIFACE or IP_FW_F_OIFACE)
 * is set. Note some packets lack a receive or transmit interface
 * (in which case the missing "interface" never matches).
 */
 
union ip6_fw_if {
    struct in6_addr fu_via_ip6;	/* Specified by IPv6 address */
    struct {			/* Specified by interface name */
#define IP6FW_IFNLEN     IFNAMSIZ
	    char  name[IP6FW_IFNLEN];
	    short unit;		/* -1 means match any unit */
    } fu_via_if;
};
 
/*
 * Format of an IP firewall descriptor
 *
 * fw_src, fw_dst, fw_smsk, fw_dmsk are always stored in network byte order.
 * fw_flg and fw_n*p are stored in host byte order (of course).
 * Port numbers are stored in HOST byte order.
 * Warning: setsockopt() will fail if sizeof(struct ip_fw) > MLEN (108)
 */
 
struct ip6_fw {
    u_long fw_pcnt,fw_bcnt;		/* Packet and byte counters */
    struct in6_addr fw_src, fw_dst;	/* Source and destination IPv6 addr */
    struct in6_addr fw_smsk, fw_dmsk;	/* Mask for src and dest IPv6 addr */
    u_short fw_number;			/* Rule number */
    u_short fw_flg;			/* Flags word */
#define IPV6_FW_MAX_PORTS	10	/* A reasonable maximum */
    u_int fw_ipflg;			/* IP flags word */
    u_short fw_pts[IPV6_FW_MAX_PORTS];	/* Array of port numbers to match */
    u_char fw_ip6opt,fw_ip6nopt;	/* IPv6 options set/unset */
    u_char fw_tcpf,fw_tcpnf;		/* TCP flags set/unset */
#define IPV6_FW_ICMPTYPES_DIM (256 / (sizeof(unsigned) * 8))
    unsigned fw_icmp6types[IPV6_FW_ICMPTYPES_DIM]; /* ICMP types bitmap */
    long timestamp;			/* timestamp (tv_sec) of last match */
    union ip6_fw_if fw_in_if, fw_out_if;/* Incoming and outgoing interfaces */
    union {
	u_short fu_divert_port;		/* Divert/tee port (options IP6DIVERT) */
	u_short fu_skipto_rule;		/* SKIPTO command rule number */
	u_short fu_reject_code;		/* REJECT response code */
    } fw_un;
    u_char fw_prot;			/* IPv6 protocol */
    u_char fw_nports;			/* N'of src ports and # of dst ports */
					/* in ports array (dst ports follow */
					/* src ports; max of 10 ports in all; */
					/* count of 0 means match all ports) */
};
 
#define IPV6_FW_GETNSRCP(rule)		((rule)->fw_nports & 0x0f)
#define IPV6_FW_SETNSRCP(rule, n)		do {				\
					  (rule)->fw_nports &= ~0x0f;	\
					  (rule)->fw_nports |= (n);	\
					} while (0)
#define IPV6_FW_GETNDSTP(rule)		((rule)->fw_nports >> 4)
#define IPV6_FW_SETNDSTP(rule, n)		do {				\
					  (rule)->fw_nports &= ~0xf0;	\
					  (rule)->fw_nports |= (n) << 4;\
					} while (0)
 
#define fw_divert_port	fw_un.fu_divert_port
#define fw_skipto_rule	fw_un.fu_skipto_rule
#define fw_reject_code	fw_un.fu_reject_code
 
struct ip6_fw_chain {
        LIST_ENTRY(ip6_fw_chain) chain;
        struct ip6_fw    *rule;
};
 
/*
 * Values for "flags" field .
 */
#define IPV6_FW_F_IN	0x0001	/* Check inbound packets		*/
#define IPV6_FW_F_OUT	0x0002	/* Check outbound packets		*/
#define IPV6_FW_F_IIFACE	0x0004	/* Apply inbound interface test		*/
#define IPV6_FW_F_OIFACE	0x0008	/* Apply outbound interface test	*/
 
#define IPV6_FW_F_COMMAND 0x0070	/* Mask for type of chain entry:	*/
#define IPV6_FW_F_DENY	0x0000	/* This is a deny rule			*/
#define IPV6_FW_F_REJECT	0x0010	/* Deny and send a response packet	*/
#define IPV6_FW_F_ACCEPT	0x0020	/* This is an accept rule		*/
#define IPV6_FW_F_COUNT	0x0030	/* This is a count rule			*/
#define IPV6_FW_F_DIVERT	0x0040	/* This is a divert rule		*/
#define IPV6_FW_F_TEE	0x0050	/* This is a tee rule			*/
#define IPV6_FW_F_SKIPTO	0x0060	/* This is a skipto rule		*/
 
#define IPV6_FW_F_PRN	0x0080	/* Print if this rule matches		*/
 
#define IPV6_FW_F_SRNG	0x0100	/* The first two src ports are a min	*
				 * and max range (stored in host byte	*
				 * order).				*/
 
#define IPV6_FW_F_DRNG	0x0200	/* The first two dst ports are a min	*
				 * and max range (stored in host byte	*
				 * order).				*/
 
#define IPV6_FW_F_IIFNAME	0x0400	/* In interface by name/unit (not IP)	*/
#define IPV6_FW_F_OIFNAME	0x0800	/* Out interface by name/unit (not IP)	*/
 
#define IPV6_FW_F_INVSRC	0x1000	/* Invert sense of src check		*/
#define IPV6_FW_F_INVDST	0x2000	/* Invert sense of dst check		*/
 
#define IPV6_FW_F_FRAG	0x4000	/* Fragment				*/
 
#define IPV6_FW_F_ICMPBIT 0x8000	/* ICMP type bitmap is valid		*/
 
#define IPV6_FW_F_MASK	0xFFFF	/* All possible flag bits mask		*/
 
/* 
 * Flags for the 'fw_ipflg' field, for comparing values of ip and its protocols. */
#define	IPV6_FW_IF_TCPEST 0x00000020	/* established TCP connection	*/
#define IPV6_FW_IF_TCPMSK 0x00000020	/* mask of all TCP values */
 
/*
 * For backwards compatibility with rules specifying "via iface" but
 * not restricted to only "in" or "out" packets, we define this combination
 * of bits to represent this configuration.
 */
 
#define IF6_FW_F_VIAHACK	(IPV6_FW_F_IN|IPV6_FW_F_OUT|IPV6_FW_F_IIFACE|IPV6_FW_F_OIFACE)
 
/*
 * Definitions for REJECT response codes.
 * Values less than 256 correspond to ICMP unreachable codes.
 */
#define IPV6_FW_REJECT_RST	0x0100		/* TCP packets: send RST */
 
/*
 * Definitions for IPv6 option names.
 */
#define IPV6_FW_IP6OPT_HOPOPT	0x01
#define IPV6_FW_IP6OPT_ROUTE	0x02
#define IPV6_FW_IP6OPT_FRAG	0x04
#define IPV6_FW_IP6OPT_ESP	0x08
#define IPV6_FW_IP6OPT_AH	0x10
#define IPV6_FW_IP6OPT_NONXT	0x20
#define IPV6_FW_IP6OPT_OPTS	0x40
 
/*
 * Definitions for TCP flags.
 */
#define IPV6_FW_TCPF_FIN	TH_FIN
#define IPV6_FW_TCPF_SYN	TH_SYN
#define IPV6_FW_TCPF_RST	TH_RST
#define IPV6_FW_TCPF_PSH	TH_PUSH
#define IPV6_FW_TCPF_ACK	TH_ACK
#define IPV6_FW_TCPF_URG	TH_URG
 
/*
 * Main firewall chains definitions and global var's definitions.
 */
#ifdef _KERNEL
 
/*
 * Function definitions.
 */
void ip6_fw_init(void);
 
/* Firewall hooks */
struct ip6_hdr;
typedef	int ip6_fw_chk_t __P((struct ip6_hdr**, struct ifnet*, struct mbuf**));
typedef	int ip6_fw_ctl_t __P((int, struct mbuf**));
extern	ip6_fw_chk_t *ip6_fw_chk_ptr;
extern	ip6_fw_ctl_t *ip6_fw_ctl_ptr;
#if defined(__FreeBSD__) && __FreeBSD__ >= 4
extern	int ip6_fw_enable;
#endif
 
#endif /* _KERNEL */
 
#endif /* _IP6_FW_H */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.