URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [net/] [bsd_tcpip/] [v2_0/] [include/] [sys/] [protosw.h] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
//========================================================================== // // include/sys/protosw.h // //========================================================================== //####BSDCOPYRIGHTBEGIN#### // // ------------------------------------------- // // Portions of this software may have been derived from OpenBSD, // FreeBSD or other sources, and are covered by the appropriate // copyright disclaimers included herein. // // Portions created by Red Hat are // Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. // // ------------------------------------------- // //####BSDCOPYRIGHTEND#### //========================================================================== /*- * Copyright (c) 1982, 1986, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)protosw.h 8.1 (Berkeley) 6/2/93 * $FreeBSD: src/sys/sys/protosw.h,v 1.28.2.2 2001/07/03 11:02:01 ume Exp $ */ #ifndef _SYS_PROTOSW_H_ #define _SYS_PROTOSW_H_ /* Forward declare these structures referenced from prototypes below. */ struct mbuf; struct proc; struct sockaddr; struct socket; struct sockopt; /*#ifdef _KERNEL*/ /* * Protocol switch table. * * Each protocol has a handle initializing one of these structures, * which is used for protocol-protocol and system-protocol communication. * * A protocol is called through the pr_init entry before any other. * Thereafter it is called every 200ms through the pr_fasttimo entry and * every 500ms through the pr_slowtimo for timer based actions. * The system will call the pr_drain entry if it is low on space and * this should throw away any non-critical data. * * Protocols pass data between themselves as chains of mbufs using * the pr_input and pr_output hooks. Pr_input passes data up (towards * the users) and pr_output passes it down (towards the interfaces); control * information passes up and down on pr_ctlinput and pr_ctloutput. * The protocol is responsible for the space occupied by any the * arguments to these entries and must dispose it. * * In retrospect, it would be a lot nicer to use an interface * similar to the vnode VOP interface. */ struct protosw { short pr_type; /* socket type used for */ struct domain *pr_domain; /* domain protocol a member of */ short pr_protocol; /* protocol number */ short pr_flags; /* see below */ /* protocol-protocol hooks */ void (*pr_input) __P((struct mbuf *, int len)); /* input to protocol (from below) */ int (*pr_output) __P((struct mbuf *m, struct socket *so)); /* output to protocol (from above) */ void (*pr_ctlinput)__P((int, struct sockaddr *, void *)); /* control input (from below) */ int (*pr_ctloutput)__P((struct socket *, struct sockopt *)); /* control output (from above) */ /* user-protocol hook */ void *pr_ousrreq; /* utility hooks */ void (*pr_init) __P((void)); /* initialization hook */ void (*pr_fasttimo) __P((void)); /* fast timeout (200ms) */ void (*pr_slowtimo) __P((void)); /* slow timeout (500ms) */ void (*pr_drain) __P((void)); /* flush any excess space possible */ struct pr_usrreqs *pr_usrreqs; /* supersedes pr_usrreq() */ }; /*#endif*/ #define PR_SLOWHZ 2 /* 2 slow timeouts per second */ #define PR_FASTHZ 5 /* 5 fast timeouts per second */ /* * Values for pr_flags. * PR_ADDR requires PR_ATOMIC; * PR_ADDR and PR_CONNREQUIRED are mutually exclusive. * PR_IMPLOPCL means that the protocol allows sendto without prior connect, * and the protocol understands the MSG_EOF flag. The first property is * is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed * anyhow). */ #define PR_ATOMIC 0x01 /* exchange atomic messages only */ #define PR_ADDR 0x02 /* addresses given with messages */ #define PR_CONNREQUIRED 0x04 /* connection required by protocol */ #define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */ #define PR_RIGHTS 0x10 /* passes capabilities */ #define PR_IMPLOPCL 0x20 /* implied open/close */ #define PR_LASTHDR 0x40 /* enforce ipsec policy; last header */ /* * The arguments to usrreq are: * (*protosw[].pr_usrreq)(up, req, m, nam, opt); * where up is a (struct socket *), req is one of these requests, * m is a optional mbuf chain containing a message, * nam is an optional mbuf chain containing an address, * and opt is a pointer to a socketopt structure or nil. * The protocol is responsible for disposal of the mbuf chain m, * the caller is responsible for any space held by nam and opt. * A non-zero return from usrreq gives an * UNIX error number which should be passed to higher level software. */ #define PRU_ATTACH 0 /* attach protocol to up */ #define PRU_DETACH 1 /* detach protocol from up */ #define PRU_BIND 2 /* bind socket to address */ #define PRU_LISTEN 3 /* listen for connection */ #define PRU_CONNECT 4 /* establish connection to peer */ #define PRU_ACCEPT 5 /* accept connection from peer */ #define PRU_DISCONNECT 6 /* disconnect from peer */ #define PRU_SHUTDOWN 7 /* won't send any more data */ #define PRU_RCVD 8 /* have taken data; more room now */ #define PRU_SEND 9 /* send this data */ #define PRU_ABORT 10 /* abort (fast DISCONNECT, DETATCH) */ #define PRU_CONTROL 11 /* control operations on protocol */ #define PRU_SENSE 12 /* return status into m */ #define PRU_RCVOOB 13 /* retrieve out of band data */ #define PRU_SENDOOB 14 /* send out of band data */ #define PRU_SOCKADDR 15 /* fetch socket's address */ #define PRU_PEERADDR 16 /* fetch peer's address */ #define PRU_CONNECT2 17 /* connect two sockets */ /* begin for protocols internal use */ #define PRU_FASTTIMO 18 /* 200ms timeout */ #define PRU_SLOWTIMO 19 /* 500ms timeout */ #define PRU_PROTORCV 20 /* receive from below */ #define PRU_PROTOSEND 21 /* send to below */ /* end for protocol's internal use */ #define PRU_SEND_EOF 22 /* send and close */ #define PRU_NREQ 22 #ifdef PRUREQUESTS char *prurequests[] = { "ATTACH", "DETACH", "BIND", "LISTEN", "CONNECT", "ACCEPT", "DISCONNECT", "SHUTDOWN", "RCVD", "SEND", "ABORT", "CONTROL", "SENSE", "RCVOOB", "SENDOOB", "SOCKADDR", "PEERADDR", "CONNECT2", "FASTTIMO", "SLOWTIMO", "PROTORCV", "PROTOSEND", "SEND_EOF", }; #endif #ifdef _KERNEL /* users shouldn't see this decl */ struct ifnet; struct stat; struct ucred; struct uio; /* * If the ordering here looks odd, that's because it's alphabetical. * Having this structure separated out from the main protoswitch is allegedly * a big (12 cycles per call) lose on high-end CPUs. We will eventually * migrate this stuff back into the main structure. */ struct pr_usrreqs { int (*pru_abort) __P((struct socket *so)); int (*pru_accept) __P((struct socket *so, struct sockaddr **nam)); int (*pru_attach) __P((struct socket *so, int proto, struct proc *p)); int (*pru_bind) __P((struct socket *so, struct sockaddr *nam, struct proc *p)); int (*pru_connect) __P((struct socket *so, struct sockaddr *nam, struct proc *p)); int (*pru_connect2) __P((struct socket *so1, struct socket *so2)); int (*pru_control) __P((struct socket *so, u_long cmd, caddr_t data, struct ifnet *ifp, struct proc *p)); int (*pru_detach) __P((struct socket *so)); int (*pru_disconnect) __P((struct socket *so)); int (*pru_listen) __P((struct socket *so, struct proc *p)); int (*pru_peeraddr) __P((struct socket *so, struct sockaddr **nam)); int (*pru_rcvd) __P((struct socket *so, int flags)); int (*pru_rcvoob) __P((struct socket *so, struct mbuf *m, int flags)); int (*pru_send) __P((struct socket *so, int flags, struct mbuf *m, struct sockaddr *addr, struct mbuf *control, struct proc *p)); #define PRUS_OOB 0x1 #define PRUS_EOF 0x2 #define PRUS_MORETOCOME 0x4 int (*pru_sense) __P((struct socket *so, struct stat *sb)); int (*pru_shutdown) __P((struct socket *so)); int (*pru_sockaddr) __P((struct socket *so, struct sockaddr **nam)); /* * These three added later, so they are out of order. They are used * for shortcutting (fast path input/output) in some protocols. * XXX - that's a lie, they are not implemented yet * Rather than calling sosend() etc. directly, calls are made * through these entry points. For protocols which still use * the generic code, these just point to those routines. */ int (*pru_sosend) __P((struct socket *so, struct sockaddr *addr, struct uio *uio, struct mbuf *top, struct mbuf *control, int flags, struct proc *p)); int (*pru_soreceive) __P((struct socket *so, struct sockaddr **paddr, struct uio *uio, struct mbuf **mp0, struct mbuf **controlp, int *flagsp)); int (*pru_sopoll) __P((struct socket *so, int events, struct ucred *cred, struct proc *p)); }; int pru_accept_notsupp __P((struct socket *so, struct sockaddr **nam)); int pru_connect_notsupp __P((struct socket *so, struct sockaddr *nam, struct proc *p)); int pru_connect2_notsupp __P((struct socket *so1, struct socket *so2)); int pru_control_notsupp __P((struct socket *so, u_long cmd, caddr_t data, struct ifnet *ifp, struct proc *p)); int pru_listen_notsupp __P((struct socket *so, struct proc *p)); int pru_rcvd_notsupp __P((struct socket *so, int flags)); int pru_rcvoob_notsupp __P((struct socket *so, struct mbuf *m, int flags)); int pru_sense_null __P((struct socket *so, struct stat *sb)); #endif /* _KERNEL */ /* * The arguments to the ctlinput routine are * (*protosw[].pr_ctlinput)(cmd, sa, arg); * where cmd is one of the commands below, sa is a pointer to a sockaddr, * and arg is a `void *' argument used within a protocol family. */ #define PRC_IFDOWN 0 /* interface transition */ #define PRC_ROUTEDEAD 1 /* select new route if possible ??? */ #define PRC_IFUP 2 /* interface has come back up */ #define PRC_QUENCH2 3 /* DEC congestion bit says slow down */ #define PRC_QUENCH 4 /* some one said to slow down */ #define PRC_MSGSIZE 5 /* message size forced drop */ #define PRC_HOSTDEAD 6 /* host appears to be down */ #define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */ #define PRC_UNREACH_NET 8 /* no route to network */ #define PRC_UNREACH_HOST 9 /* no route to host */ #define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */ #define PRC_UNREACH_PORT 11 /* bad port # */ /* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */ #define PRC_UNREACH_SRCFAIL 13 /* source route failed */ #define PRC_REDIRECT_NET 14 /* net routing redirect */ #define PRC_REDIRECT_HOST 15 /* host routing redirect */ #define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */ #define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */ #define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */ #define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */ #define PRC_PARAMPROB 20 /* header incorrect */ #define PRC_UNREACH_ADMIN_PROHIB 21 /* packet administrativly prohibited */ #define PRC_NCMDS 22 #define PRC_IS_REDIRECT(cmd) \ ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST) #ifdef PRCREQUESTS char *prcrequests[] = { "IFDOWN", "ROUTEDEAD", "IFUP", "DEC-BIT-QUENCH2", "QUENCH", "MSGSIZE", "HOSTDEAD", "#7", "NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH", "#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT", "TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS", "PARAMPROB", "ADMIN-UNREACH" }; #endif /* * The arguments to ctloutput are: * (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p); * req is one of the actions listed below, so is a (struct socket *), * level is an indication of which protocol layer the option is intended. * optname is a protocol dependent socket option request, * optval is a pointer to a mbuf-chain pointer, for value-return results. * The protocol is responsible for disposal of the mbuf chain *optval * if supplied, * the caller is responsible for any space held by *optval, when returned. * A non-zero return from usrreq gives an * UNIX error number which should be passed to higher level software. */ #define PRCO_GETOPT 0 #define PRCO_SETOPT 1 #define PRCO_NCMDS 2 #ifdef PRCOREQUESTS char *prcorequests[] = { "GETOPT", "SETOPT", }; #endif #ifdef _KERNEL void pfctlinput __P((int, struct sockaddr *)); void pfctlinput2 __P((int, struct sockaddr *, void *)); struct protosw *pffindproto __P((int family, int protocol, int type)); struct protosw *pffindtype __P((int family, int type)); #endif #endif
Go to most recent revision | Compare with Previous | Blame | View Log