OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [net/] [snmp/] [agent/] [v2_0/] [utils/] [mib2c/] [mib2c] - Rev 27

Go to most recent revision | Compare with Previous | Blame | View Log

#!/usr/bin/perl
#!/usr/bin/perl -w

#
# Description: 
#
# This program, given an OID reference as an argument, creates some
# template mib module files to be used with the ucd-snmp agent.  It is
# far from perfect and will not generate working modules, but it
# significantly shortens development time by outlining the basic
# structure.
#
# Its up to you to verify what it does and change the default values
# it returns.
#

use SNMP;
use FileHandle;

#use strict 'vars';
$SNMP::save_descriptions=1;
$SNMP::use_long_names=1;
$SNMP::use_enums=1;
SNMP::initMib();

$configfile="mib2c.conf";
$debug=0;
$nostats = 0;

sub usage {
    print "$0 [-h] [-c configfile] [-f prefix] mibNode\n\n";
    print "  -h\t\tThis message.\n\n";
    print "  -c configfile\tSpecifies the configuration file to use\n\t\tthat dictates what the output of mib2c will look like.\n\n";
    print "  -f prefix\tSpecifies the output prefix to use.  All code\n\t\twill be put into prefix.c and prefix.h\n\n";
    print "  mibNode\tThe name of the top level mib node you want to\n\t\tgenerate code for.  By default, the code will be stored in\n\t\tmibNode.c and mibNode.h (use the -f flag to change this)\n\n";
    print "  -d\t\tdebugging output (dont do it.  trust me.)\n\n";
    print "  -s\t\tDon't display statistics at the end\n\n";
    1;
}       

while($#ARGV >= 0) {
    $_ = shift;
    $configfile = shift if (/-c/);
    $debug = 1 if (/-d/);
    $nostats = 1 if (/-s/);
    usage && exit(1) if (/-h/);
    $outputName = shift if (/-f/);
    $oid = $_ if (/^[^-]/);
}
 
read_config($configfile);
#
# internal conversion tables
#

%accessToUCD = qw(ReadOnly RONLY ReadWrite RWRITE 
                  WriteOnly RWRITE Create RWRITE);

#  The lengths of the defined 'variableN' structures
@varLengths = (2,4,7,8,13);

if (!defined($oid)) {
    print STDERR "You didn\'t specify a mib oid to convert!\n";
    usage();
    exit(1);
}

$mib = $SNMP::MIB{$oid};
$_ = $commaoid = $fulloid = $mib->{'objectID'};
if (!defined ($fulloid)) {
    print STDERR "Couldn\'t find mib reference: $oid\n";
    exit(1);
}
s/[^.]//g;
$commaoid =~ s/\./,/g;
$commaoid =~ s/^,//g;

$outputName = $mib->{'label'} if (!defined($outputName));
$OUTPUTNAME = uc($outputName);
$vroutine="$outputName";
print "outputting to $outputName.c and $outputName.h ...\n";

#============================================
#
#   Walk the MIB tree, and construct strings
#     holding the various fragments of code needed.
#
#   'loadMib' returns the length of the longest OID suffix
#     encountered.
#
#   The variables constructed and used are:
#
#   (in the header file)
#       functionInfo :  A list of definitions for the table-handling functions,
#                       and routines for SETtable variables.
#                       (The main scalar handling routine is handled implicitly)
#
#   (in the code file)
#       structinfo :    The contents of the variableN structure listing
#                       the variables handled, including type, access level,
#                       OID suffix and 'magic number'
#
#       caseStatements: A hash array (indexed by variable routine name)
#                       containing the body of the switch statement
#                       used for returning the appropriate values.
#                       At a minimum, this consists of the various 'case' labels
#                       If full type information is available (from mib2c.conf)
#                       then this will also include a default initialiser,
#                       and setting of a 'write_method' (if appropriate).
#
#       writeFuncs:     A list of function skeletons for setting variables
#                       (for variables with suitable access levels).
#                       Note that this list will not include functions
#                       for variables which don't provide type information
#                       in the mib2c.conf file (even if such variables are
#                       defined as writeable in the variableN structure).
#
#============================================
$count = 0;
$depth = loadMib($mib,0)-1;

#  Determine which 'variableN' structure is needed
for($varlen = 0; $varlen <= $#varLengths; $varlen++) {
  last if ($depth <= $varLengths[$varlen]);
}
$varlen = $varLengths[$varlen];

#============================================
#
#       Table-handling routines.
#
#============================================
foreach $vtable (@table_list) {
    foreach $ptable (@processtable) {
        $variables{$ptable}{'processed'} .= 
            (eval "\"$variables{$ptable}{'code'}\"") . "\n\n";
    }
    $var_routines .= 
        (eval "\"$variables{'code-var_table'}{'code'}\"") . "\n\n";
}

#============================================
#
#   Output the header file
#
#============================================
open(DOTH,">$outputName.h");
print DOTH (eval "\"$variables{'code-dot-h'}{'code'}\"") . "\n";
close(DOTH);

#============================================
#
#   Output the code file:
#       Initialisation and main variable routine.
#
#============================================

open(DOTC,">$outputName.c");
print DOTC (eval "\"$variables{'code-main-part'}{'code'}\"") . "\n\n";;
close(DOTC);

#============================================
#
# Everyone loves statistics.
#
#============================================
print "  depth: $depth\n";
print "  Number of Lines Created:\n";
system("wc -l $outputName.c $outputName.h");
print "Done.\n";

#============================================
#
#  loadMib:
#       Recursive routine to walk the mib,
#       and construct the various code fragment strings.
#
#============================================
sub loadMib {
    my $mib = shift;
    my $i;
    my $depth = shift;
    $depth = $depth + 1;
    my $name = $mib->{'label'};
    my $NAME = uc($name);
    print "doing $mib->{label} : $mib->{objectID}\n" if $debug;
    if (defined($mib->{'access'}) && 
        $mib->{'access'} =~ /ReadOnly|ReadWrite|WriteOnly|Create|NoAccess/) {
        $count = $count + 1;
        $subid = $mib->{'objectID'};
        $subid =~ s/$fulloid\.//;
        $subid =~ s/\./,/g;
        if (!defined($variables{$mib->{'type'}})  && !defined($mib->{'indexes'})) {
            print STDERR "unknown type:  $mib->{type} for $mib->{label} $mib->{'access'}\n";
            print STDERR "unknown type:  no information generated for $mib->{label}\n";
        } else {
            foreach $i (@process) {
                next if (defined($variables{$i}{'skipif'}) &&
                         eval $variables{$i}{'skipif'});
                my $result = (eval "\"$variables{$i}{'code'}\"");
                $variables{$i}{'processed'} .= "$result\n";
                $variables{$vroutine}{$i}{'processed'} .= "$result\n";
            }
        }
        if (defined($mib->{'indexes'})) {
            print "indexes: ", join(", ",@{$mib->{'indexes'}}),"\n" if ($debug);
            $variables{$vroutine}{'indexes'} = $mib->{'indexes'};
            foreach $i (@{$mib->{'indexes'}}) {
                $variables{$vroutine}{$i}{'isanindex'} = 1;
            }
        }
    }
    my $children = $$mib{'children'}; 
    my $i;
    my $newdepth = $depth;
    foreach $i (@{$children}) {
        if ( $name =~ /Table$/ ) {
            $vroutine="$name";
            push @table_list, $name;
            $newdepth = max(loadMib($i, $depth), $newdepth);
            $vroutine="$outputName";
        }
        else {
            $newdepth = max(loadMib($i, $depth), $newdepth);
        }
    }
    return $newdepth;
}

sub max {
    my $x = shift;
    my $y = shift;
    return ($x > $y) ? $x : $y;
}


sub read_config() {
    my $configfile = shift;
    my ($type, $lasttoken);
    my $fh = new FileHandle;
    if ( $fh->open("<$configfile") ) {
        while(<$fh>) {
            next if (/^\s*\#/ || /^\s*$/);
            if (/^\s*type:\s*(.*)/) {
                if (defined($type) && defined($lasttoken) && 
                    defined ($variables{$type}{$lasttoken})) {
                    chomp($variables{$type}{$lasttoken});
                }
                $type = $1;
                chomp($type);
            } elsif (/include:\s*(.*)/) {
                read_config($1);
            } elsif (/process:\s*(.*)/) {
                push (@process, $1);
            } elsif (/processtable:\s*(.*)/) {
                push (@processtable, $1);
            } elsif (/delete:\s*(.*)/) {
                delete($variables{$type}{$1});
            } elsif (/copy:\s*(.*)/) {
                my $item;
                chomp($1);
                foreach $item (keys(%{$variables{$1}})) {
                    $variables{$type}{$item} = $variables{$1}{$item};
                }
            } else {
                if (/\s*([^:]*):(\s*.*)/) {
                    if (!defined($variables{$type}{$1})) {
                        if (defined($type) && defined($lasttoken) && 
                            defined ($variables{$type}{$lasttoken})) {
                            chomp($variables{$type}{$lasttoken});
                        }
                        $variables{$type}{$1} = $2;
                        $lasttoken = $1;
                        $variables{$type}{$1} =~ s/^\t+//;
                    } else {
                        # duplicate entry:  tack it on.
                        my ($x, $y) = ($1, $2);
                        $y =~ s/^\t+//;
                        $variables{$type}{$x} .= "\n" . $y;
                    }
                } else {
                    # continuation line, it started with spaces or a +
                    s/^\s*//;
                    s/^\+//; 
                    $variables{$type}{$lasttoken} .= "\n" . $_;
                    chomp($variables{$type}{$lasttoken});
                }
            }
        }
        $fh->close();
    } else {
        warn "Config file ($configfile) not found.\n";
    }
}

sub evalstr {
    my $str = shift;
#    if ($str !~ /^\"/) {
        $str = "\"$str\"";  # surround by quotes.
#    }
    eval ($str);            # should return a string, with variables expanded
}

sub evalrstr {
    my $rstr = shift;
#    if ($str !~ /^\"/) {
#       $$rstr = "\"" . $$rstr . "\"";  # surround by quotes.
#    }
    eval ("\"$$rstr\"");            # should return a string, with variables expanded
}

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.