Subversion Repositories openrisc_me

# 
# Define types of data by mib type, and translate into needed C code.
#

############################################################################
# source variable typing information:
include: mib2c.vartypes.conf

# Begin code template section
############################################################################
# variable statemnts used in a couple of places below
############################################################################
type:   code-varInits
code:     /* variables we may use later */
code:     static long long_ret;
code:     static unsigned char string[SPRINT_MAX_LEN];
code:     static oid objid[MAX_OID_LEN];
code:     static struct counter64 c64;


############################################################################
# The .h file
############################################################################
type:   code-dot-h
code:   //==========================================================================
code:   //
code:   //      snmp/snmpagent/current/include/mibgroup/mibII/$outputName.h
code:   //
code:   //
code:   //==========================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
code:   //####UCDSNMPCOPYRIGHTBEGIN####
code:   //
code:   // -------------------------------------------
code:   //
code:   // Portions of this software may have been derived from the UCD-SNMP
code:   // project,  <http://ucd-snmp.ucdavis.edu/>  from the University of
code:   // California at Davis, which was originally based on the Carnegie Mellon
code:   // University SNMP implementation.  Portions of this software are therefore
code:   // covered by the appropriate copyright disclaimers included herein.
code:   //
code:   // The release used was version 4.1.2 of May 2000.  \"ucd-snmp-4.1.2\"
code:   // -------------------------------------------
code:   //
code:   //####UCDSNMPCOPYRIGHTEND####
code:   //==========================================================================
code:   //#####DESCRIPTIONBEGIN####
code:   //
code:   // Author(s):    hmt
code:   // Contributors: hmt
code:   // Date:         2000-05-30
code:   // Purpose:      Port of UCD-SNMP distribution to eCos.
code:   // Description:  
code:   //              
code:   //
code:   //####DESCRIPTIONEND####
code:   //
code:   //==========================================================================
code:   /********************************************************************
code:          Copyright 1989, 1991, 1992 by Carnegie Mellon University
code:   \ 
code:                             Derivative Work -
code:   Copyright 1996, 1998, 1999, 2000 The Regents of the University of California
code:   \ 
code:                            All Rights Reserved
code:   \ 
code:   Permission to use, copy, modify and distribute this software and its
code:   documentation for any purpose and without fee is hereby granted,
code:   provided that the above copyright notice appears in all copies and
code:   that both that copyright notice and this permission notice appear in
code:   supporting documentation, and that the name of CMU and The Regents of
code:   the University of California not be used in advertising or publicity
code:   pertaining to distribution of the software without specific written
code:   permission.
code:   \ 
code:   CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL
code:   WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED
code:   WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL CMU OR
code:   THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL,
code:   INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
code:   FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
code:   CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
code:   CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
code:   *********************************************************************/
code:   /* This file was generated by mib2c and is intended for use as a mib module
code:     for the ucd-snmp snmpd agent. */
code:   
code:   #ifndef _MIBGROUP_${OUTPUTNAME}_H
code:   #define _MIBGROUP_${OUTPUTNAME}_H
code:   
code:   /* we may use header_generic and header_simple_table from the util_funcs module */
code:   
code:   config_require(util_funcs)
code:
code:   /* function prototypes */
code:   
code:   void   init_$outputName(void);
code:   FindVarMethod var_$outputName;
code:   $variables{'code-var_table-decl'}{'processed'}
code:   $variables{'code-write-func-decl'}{'processed'}
code:   
code:   #endif /* _MIBGROUP_${OUTPUTNAME}_H */

############################################################################
# The .c file, top
############################################################################
type:   code-main-part
code:   //==========================================================================
code:   //
code:   //      snmp/snmpagent/current/src/mibgroup/mibII/$outputName.c
code:   //
code:   //
code:   //==========================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
code:   //####UCDSNMPCOPYRIGHTBEGIN####
code:   //
code:   // -------------------------------------------
code:   //
code:   // Portions of this software may have been derived from the UCD-SNMP
code:   // project,  <http://ucd-snmp.ucdavis.edu/>  from the University of
code:   // California at Davis, which was originally based on the Carnegie Mellon
code:   // University SNMP implementation.  Portions of this software are therefore
code:   // covered by the appropriate copyright disclaimers included herein.
code:   //
code:   // The release used was version 4.1.2 of May 2000.  \"ucd-snmp-4.1.2\"
code:   // -------------------------------------------
code:   //
code:   //####UCDSNMPCOPYRIGHTEND####
code:   //==========================================================================
code:   //#####DESCRIPTIONBEGIN####
code:   //
code:   // Author(s):    hmt
code:   // Contributors: hmt
code:   // Date:         2000-05-30
code:   // Purpose:      Port of UCD-SNMP distribution to eCos.
code:   // Description:  
code:   //              
code:   //
code:   //####DESCRIPTIONEND####
code:   //
code:   //==========================================================================
code:   /********************************************************************
code:          Copyright 1989, 1991, 1992 by Carnegie Mellon University
code:   \ 
code:                             Derivative Work -
code:   Copyright 1996, 1998, 1999, 2000 The Regents of the University of California
code:   \ 
code:                            All Rights Reserved
code:   \ 
code:   Permission to use, copy, modify and distribute this software and its
code:   documentation for any purpose and without fee is hereby granted,
code:   provided that the above copyright notice appears in all copies and
code:   that both that copyright notice and this permission notice appear in
code:   supporting documentation, and that the name of CMU and The Regents of
code:   the University of California not be used in advertising or publicity
code:   pertaining to distribution of the software without specific written
code:   permission.
code:   \ 
code:   CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL
code:   WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED
code:   WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL CMU OR
code:   THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL,
code:   INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
code:   FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
code:   CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
code:   CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
code:   *********************************************************************/
code:   /* This file was generated by mib2c and is intended for use as a mib module
code:      for the ucd-snmp snmpd agent. */
code:   
code:   /* This should always be included first before anything else */
code:   #include <config.h>
code:   
code:   /* minimal include directives */
code:   #include \"mibincl.h\"
code:   #include \"mibgroup/util_funcs.h\"
code:   #include \"mibgroup/mibII/$outputName.h\"
code:   
code:   /* 
code:    * ${outputName}_variables_oid:
code:    *   this is the top level oid that we want to register under.  This
code:    *   is essentially a prefix, with the suffix appearing in the
code:    *   variable below.
code:    */
code:   
code:   oid ${outputName}_variables_oid[] = { $commaoid };
code:   
code:   /* 
code:    * variable$varlen ${outputName}_variables:
code:    *   this variable defines function callbacks and type return information 
code:    *   for the $outputName mib section 
code:    */
code:   
code:   struct variable$varlen ${outputName}_variables[] = {
code:   /*  magic number        , variable type , ro/rw , callback fn  , L, oidsuffix */
code:   $variables{'variable-structure-info'}{'processed'}
code:   };
code:   /*    (L = length of the oidsuffix) */
code:   
code:   /*
code:    * init_$outputName():
code:    *   Initialization routine.  This is called when the agent starts up.
code:    *   At a minimum, registration of your variables should take place here.
code:    */
code:   void init_$outputName(void) {
code:   
code:     /* register ourselves with the agent to handle our mib tree */
code:     REGISTER_MIB(\"$outputName\", ${outputName}_variables, variable$varlen,\
code:                  ${outputName}_variables_oid);
code:   
code:     /* place any other initialization junk you need here */
code:   }
code:   
code:   /*
code:    * var_$outputName():
code:    *   This function is called every time the agent gets a request for
code:    *   a scalar variable that might be found within your mib section
code:    *   registered above.  It is up to you to do the right thing and
code:    *   return the correct value.
code:    *     You should also correct the value of \"var_len\" if necessary.
code:    *
code:    *   Please see the documentation for more information about writing
code:    *   module extensions, and check out the examples in the examples
code:    *   and mibII directories.
code:    */
code:   unsigned char *
code:   var_$outputName(struct variable *vp, 
code:                   oid     *name, 
code:                   size_t  *length, 
code:                   int     exact, 
code:                   size_t  *var_len, 
code:                   WriteMethod **write_method)
code:   {
code:   
code:   $variables{'code-varInits'}{'code'}
code:   
code:     if (header_generic(vp,name,length,exact,var_len,write_method)
code:                                     == MATCH_FAILED )
code:       return NULL;
code:   
code:     /* 
code:      * this is where we do the value assignments for the mib results.
code:      */
code:     switch(vp->magic) {\n\n
code:   $variables{$outputName}{'code-case-statements'}{'processed'}
code:       default:
code:         ERROR_MSG(\"\");
code:     }
code:     return NULL;
code:   }
code:
code:   $variables{'code-var_table'}{'processed'}
code:
code:   $variables{'code-write-func'}{'processed'}

############################################################################
# var_ function for tables, which is handled specially and used above
#
#   Note: $vtable is set to the table name in the processtable loop.
############################################################################

#
# header file defs first
#
type:           code-var_table-decl
processtable:   code-var_table-decl

code:   FindVarMethod var_$vtable;

#
# Code code per table
#
type:           code-var_table
processtable:   code-var_table

code:   /*
code:    * var_$vtable():
code:    *   Handle this table separately from the scalar value case.
code:    *   The workings of this are basically the same as for var_$outputName above.
code:    */
code:   unsigned char *
code:   var_$vtable(struct variable *vp,
code:               oid     *name,
code:               size_t  *length,
code:               int     exact,
code:               size_t  *var_len,
code:               WriteMethod **write_method)
code:   {
code:   
code:   $variables{'code-varInits'}{'code'}
code:   
code:     /* 
code:      * This assumes that the table is a \'simple\' table.
code:      *    See the implementation documentation for the meaning of this.
code:      *    You will need to provide the correct value for the TABLE_SIZE parameter
code:      *
code:      * If this table does not meet the requirements for a simple table,
code:      *    you will need to provide the replacement code yourself.
code:      *    Mib2c is not smart enough to write this for you.
code:      *    Again, see the implementation documentation for what is required.
code:      */
code:     if (header_simple_table(vp,name,length,exact,var_len,write_method, TABLE_SIZE)
code:                                                   == MATCH_FAILED )
code:       return NULL;
code:   
code:     /* 
code:      * this is where we do the value assignments for the mib results.
code:      */
code:     switch(vp->magic) {\n\n
code:   $variables{$vtable}{'code-case-statements'}{'processed'}
code:       default:
code:         ERROR_MSG(\"\");
code:     }
code:     return NULL;
code:   }


############################################################################
# case statement sections
############################################################################
type:           code-case-statements
process:        code-case-statements
skipif:         $mib->{'access'} =~ /NoAccess/

code:               case $NAME:
code:                   " . (($mib->{'access'} =~ /ReadWrite|WriteOnly|Create/) ? "*write_method = write_$mib->{label};" : "") . "
code:           $variables{$mib->{'type'}}{'case'}
code:           

############################################################################
# storage structure information
############################################################################
type:           variable-structure-info
process:        variable-structure-info
skipif:         $mib->{'access'} =~ /NoAccess/
code:           " . sprintf("#define   %-20s  $count", $NAME) . "
code:           " . sprintf("  { %-20s, %-14s, %-6.6s, %s, %d, { %s } },", $NAME, $variables{$mib->{'type'}}{'asnType'}, $accessToUCD{$mib->{'access'}}, "var_$vroutine", $depth-1, $subid) . "

############################################################################
# write function defitition, also appended to the end of the .c file.
############################################################################
#
# Header info: declair write functions for set processing
#
process:        code-write-func-decl
type:           code-write-func-decl
skipif:         $mib->{'access'} !~ /Write|Create/
code:           WriteMethod write_$name;
#
# C code
#
type:           code-write-func
process:        code-write-func
skipif:         $mib->{'access'} !~ /Write|Create/
code:   int
code:   write_$name(int      action,
code:               u_char   *var_val,
code:               u_char   var_val_type,
code:               size_t   var_val_len,
code:               u_char   *statP,
code:               oid      *name,
code:               size_t   name_len)
code:   {
code:     $variables{$mib->{'type'}}{writeInit}
code:     int size;
code:   
code:     switch ( action ) {
code:           case RESERVE1:
code:             if (var_val_type != $variables{$mib->{'type'}}{asnType}){
code:                 fprintf(stderr, \"write to $name not $variables{$mib->{'type'}}{asnType}\\n\");
code:                 return SNMP_ERR_WRONGTYPE;
code:             }
code:             if (var_val_len > sizeof($variables{$mib->{'type'}}{variable})){
code:                 fprintf(stderr,\"write to $name: bad length\\n\");
code:                 return SNMP_ERR_WRONGLENGTH;
code:             }
code:             break;
code:   
code:           case RESERVE2:
code:             size = var_val_len;
code:             $variables{$mib->{'type'}}{variable} = ($variables{$mib->{'type'}}{cast}) var_val;
code:   
code:             break;
code:   
code:           case FREE:
code:                /* Release any resources that have been allocated */
code:             break;
code:   
code:           case ACTION:
code:                /* The variable has been stored in $variables{$mib->{'type'}}{variable} for
code:                you to use, and you have just been asked to do something with
code:                it.  Note that anything done here must be reversable in the UNDO case */
code:             break;
code:   
code:           case UNDO:
code:                /* Back out any changes made in the ACTION case */
code:             break;
code:   
code:           case COMMIT:
code:                /* Things are working well, so it's now safe to make the change
code:                permanently.  Make sure that anything done here can't fail! */
code:             break;
code:     }
code:     return SNMP_ERR_NOERROR;
code:   }
code:
code: