URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [tools/] [acsupport/] [acinclude.m4] - Rev 379
Go to most recent revision | Compare with Previous | Blame | View Log
dnl Process this file with aclocal to get an aclocal.m4 file. Then dnl process that with autoconf. dnl ==================================================================== dnl dnl acinclude.m4 dnl dnl Various autoconf macros that are shared between different dnl eCos packages. dnl dnl ==================================================================== dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- dnl Copyright (C) 2002, 2003 Bart Veer dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl dnl This program is free software; you can redistribute it and/or modify it dnl under the terms of the GNU General Public License as published by the Free dnl Software Foundation; either version 2 of the License, or (at your option) dnl any later version. dnl dnl This program is distributed in the hope that it will be useful, but WITHOUT dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for dnl more details. dnl dnl You should have received a copy of the GNU General Public License along with dnl this program; if not, write to the Free Software Foundation, Inc., dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl dnl Author(s): bartv dnl Contact(s): bartv dnl Date: 1998/12/16 dnl Version: 0.01 dnl dnl####DESCRIPTIONEND#### dnl ==================================================================== dnl ==================================================================== dnl Ensure that configure is not being run in the source tree, i.e. dnl that a separate build tree has been created. This is not absolutely dnl necessary at the time of writing but may become so in future, and dnl is good practice. AC_DEFUN(ECOS_CHECK_BUILD_ne_SRC,[ AC_MSG_CHECKING([that a separate build tree is being used]) ecos_cwd=`/bin/pwd` if test "${srcdir}" = "." ; then srcdir=${ecos_cwd} fi if test "${ecos_cwd}" = "${srcdir}" ; then AC_MSG_RESULT([no]) AC_MSG_ERROR([This configure script should not be run inside the source tree. Instead please use a separate build tree]) else AC_MSG_RESULT(yes) fi ]) dnl ==================================================================== dnl The AM_INIT_AUTOMAKE() will define a symbol VERSION for the dnl package's version number. Unfortunately this symbol is rather dnl hard to share if several different packages are involved, so this dnl macro is used to define an alternative symbol AC_DEFUN(ECOS_SUBST_VERSION,[ AC_REQUIRE([AM_INIT_AUTOMAKE]) ifelse($#,1,,AC_MSG_ERROR([Invalid number of arguments passed to ECOS SUBST_VERSION])) AC_DEFINE_UNQUOTED($1, "$VERSION") ]) dnl -------------------------------------------------------------------- dnl Convert a cygwin pathname to something acceptable to VC++ (but dnl still invoked from bash and cygwin's make). This means using dnl the cygpath utility and then translating any backslashes into dnl forward slashes to avoid confusing make. AC_DEFUN(ECOS_MSVC_PATH, [ AC_REQUIRE([ECOS_PROG_MSVC]) ifelse($#, 1, , AC_MSG_ERROR("Invalid number of arguments passed to ECOS MSVC_PATH")) if test "${MSVC}" = "yes" ; then $1=`cygpath -w ${$1} | tr \\\\\\\\ /` fi ]) dnl ==================================================================== dnl An internal utility to define eCos variants of various compilation dnl related flags. The aim is to avoid messing with CFLAGS, LIBS, and dnl so on because those are used for feature tests as well as for dnl passing on to the application. AC_DEFUN(ECOS_PROG_DEFINE_COMPILER_FLAGS,[ ecos_CFLAGS="" ecos_CXXFLAGS="" ecos_LDADD="" ecos_INCLUDES="" ecos_LIBS="" AC_SUBST(ecos_CFLAGS) AC_SUBST(ecos_CXXFLAGS) AC_SUBST(ecos_LDADD) AC_SUBST(ecos_INCLUDES) AC_SUBST(ecos_LIBS) ]) dnl For historical reasons some of the eCos host-side software can be dnl built with Visual C++ as well as g++. The user can specify this dnl at configure time using CC=cl, where cl.exe is the compiler driver. dnl This macro will set the variable MSVC to "yes" or to "no" depending dnl on whether or not VC++ is being used, analogous to the variable dnl GCC set by AC_PROG_CC. It provides support for an automake dnl conditional thus allowing the makefile to adapt somewhat to the dnl compiler being used. Finally it fills in the ECOS_INCLUDES, dnl ECOS_LIBS and ECOS_LDADD variables with suitable initial values. AC_DEFUN(ECOS_PROG_MSVC,[ AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([ECOS_PROG_DEFINE_COMPILER_FLAGS]) AC_MSG_CHECKING("for Visual C++") MSVC="no"; if test "${CC}" = "cl" ; then MSVC="yes" CXX="cl" MSVC_SRCDIR=${srcdir} ECOS_MSVC_PATH(MSVC_SRCDIR) AC_SUBST(MSVC_SRCDIR) ecos_INCLUDES="${ecos_INCLUDES} \"-I${MSVC_SRCDIR}\"" ecos_LDADD="-link" ecos_LIBS="advapi32.lib" fi AM_CONDITIONAL(MSVC, test "${MSVC}" = "yes") if test "${MSVC}" = "yes" ; then AC_MSG_RESULT([unfortunately yes]) else AC_MSG_RESULT([no]) fi ]) dnl ==================================================================== dnl Set up sensible flags for the various different compilers. This dnl is achieved by manipulating AM-CFLAGS and AM-CXXFLAGS via a subst, dnl plus undoing the setting of CFLAGS and CXXFLAGS done by dnl the AC_PROC_CC and AC_PROG_CXX macros (e.g. setting the default dnl compilation flags to -O2). Note that this relies dnl on knowing about the internals of those macros. dnl dnl There is little point in checking the cache: this macro does dnl not do any feature tests so checking the cache would probably dnl be more expensive than doing the work here. dnl dnl For now the only supported compilers are gcc/g++ and VC++. Attempts dnl to use another compiler will result in an error at configure-time. AC_DEFUN(ECOS_PROG_STANDARD_COMPILER_FLAGS, [ AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([ECOS_PROG_DEFINE_COMPILER_FLAGS]) AC_REQUIRE([ECOS_PROG_MSVC]) AC_MSG_CHECKING("the default compiler flags") dnl Add a user-settable flag to control whether or debugging info is dnl incorporated at compile-time. ecosflags_enable_debug="no" AC_ARG_ENABLE(debug,[ --enable-debug do a debug rather than a release build], [case "${enableval}" in yes) ecosflags_enable_debug="yes" ;; *) ecosflags_enable_debug="no" ;; esac]) dnl For VC++ builds also provide a flag for ANSI vs. unicode builds. dnl For now this does not actually affect the compiler flags. dnl NOTE: there may also have to be a flag to control whether or dnl the VC++ multi-threading flags are enabled. ecosflags_enable_ansi="no" if test "${MSVC}" = "yes" ; then AC_ARG_ENABLE(ansi,[ --enable-ansi do an ANSI rather than a unicode build], [case "${enableval}" in yes) ecosflags_enable_ansi="yes" ;; *) ecosflags_enable_ansi="no" ;; esac]) fi dnl Now we know what the user is after. if test "${GCC}" = "yes" ; then ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" elif test "${MSVC}" = "yes" ; then ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3" ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX" else AC_MSG_ERROR("default flags for ${CC} are not known") fi dnl Choose between debugging and optimization. if test "${ecosflags_enable_debug}" = "yes" ; then if test "${GCC}" = "yes" ; then ecos_CFLAGS="${ecos_CFLAGS} -g -O0" ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0" elif test "${MSVC}" = "yes" ; then ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi" ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi" fi else dnl For now building with g++ implies -O0 rather than -O2. The dnl compile-time performance of g++ at -O2 has been disappointing dnl for quite some time, and the eCos host-side code is not dnl sufficiently cpu-intensive to require -O2. if test "${GCC}" = "yes" ; then ecos_CFLAGS="${ecos_CFLAGS} -O0" ecos_CXXFLAGS="${ecos_CXXFLAGS} -O0" elif test "${MSVC}" = "yes" ; then ecos_CFLAGS="${ecos_CFLAGS} -MD -O2" ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2" fi fi CFLAGS="${ac_save_CFLAGS}" CXXFLAGS="${ac_save_CXXFLAGS}" AC_MSG_RESULT(done) ]) dnl -------------------------------------------------------------------- dnl User-settable options for assertions and tracing. dnl dnl The settable options are: dnl --disable-asserts dnl --disable-preconditions dnl --disable-postconditions dnl --disable-invariants dnl --disable-loopinvariants dnl --disable-tracing dnl --disable-fntracing AC_DEFUN(ECOS_ARG_INFRASTRUCTURE, [ AC_REQUIRE([ECOS_PROG_STANDARD_COMPILER_FLAGS]) if test "${ecosflags_enable_debug}" = "yes" ; then ecosinfra_asserts="yes" ecosinfra_preconditions="yes" ecosinfra_postconditions="yes" ecosinfra_invariants="yes" ecosinfra_loopinvariants="yes" ecosinfra_tracing="yes" ecosinfra_fntracing="yes" else ecosinfra_asserts="no" ecosinfra_preconditions="no" ecosinfra_postconditions="no" ecosinfra_invariants="no" ecosinfra_loopinvariants="no" ecosinfra_tracing="no" ecosinfra_fntracing="no" fi AC_ARG_ENABLE(asserts,[ --disable-asserts disable all assertions], [case "${enableval}" in yes) ecosinfra_asserts="yes" ;; no) ecosinfra_asserts="no" ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-asserts option]) ;; esac]) if test "${ecosinfra_asserts}" = "yes"; then AC_DEFINE(CYGDBG_USE_ASSERTS) fi AC_ARG_ENABLE(preconditions, [ --disable-preconditions disable a subset of the assertions], [case "${enableval}" in yes) ecosinfra_preconditions="yes" ;; no) ecosinfra_preconditions="no" ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-preconditions option]) ;; esac]) if test "${ecosinfra_preconditions}" = "yes"; then AC_DEFINE(CYGDBG_INFRA_DEBUG_PRECONDITIONS) fi AC_ARG_ENABLE(postconditions, [ --disable-postconditions disable a subset of the assertions], [case "${enableval}" in yes) ecosinfra_postconditions="yes" ;; no) ecosinfra_postconditions="no" ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-postconditions option]) ;; esac]) if test "${ecosinfra_postconditions}" = "yes"; then AC_DEFINE(CYGDBG_INFRA_DEBUG_POSTCONDITIONS) fi AC_ARG_ENABLE(invariants, [ --disable-invariants disable a subset of the assertions], [case "${enableval}" in yes) ecosinfra_invariants="yes" ;; no) ecosinfra_invariants="no" ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-invariants option]) ;; esac]) if test "${ecosinfra_invariants}" = "yes"; then AC_DEFINE(CYGDBG_INFRA_DEBUG_INVARIANTS) fi AC_ARG_ENABLE(loopinvariants, [ --disable-loopinvariants disable a subset of the assertions], [case "${enableval}" in yes) ecosinfra_loopinvariants="yes" ;; no) ecosinfra_loopinvariants="no" ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-loopinvariants option]) ;; esac]) if test "${ecosinfra_loopinvariants}" = "yes"; then AC_DEFINE(CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS) fi AC_ARG_ENABLE(tracing,[ --disable-tracing disable tracing], [case "${enableval}" in yes) ecosinfra_tracing="yes" ;; no) ecosinfra_tracing="no" ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-tracing option]) ;; esac]) if test "${ecosinfra_tracing}" = "yes"; then AC_DEFINE(CYGDBG_USE_TRACING) fi AC_ARG_ENABLE(fntracing,[ --disable-fntracing disable function entry/exit tracing], [case "${enableval}" in yes) ecosinfra_fntracing="yes" ;; no) ecosinfra_fntracing=no ;; *) AC_MSG_ERROR([bad value ${enableval} for disable-fntracing option]) ;; esac]) if test "${ecosinfra_fntracing}" = "yes"; then AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS) fi ]) dnl ==================================================================== dnl Inspired by KDE's autoconfig dnl This macro takes three Arguments like this: dnl AC_FIND_FILE(foo.h, $incdirs, incdir) dnl the filename to look for, the list of paths to check and dnl the variable with the result. AC_DEFUN(AC_FIND_FILE,[ $3="" for i in $2; do if test -r "$i/$1"; then $3=$i break fi done ]) dnl ==================================================================== dnl Variation of the above. dnl This macro takes three Arguments like this: dnl AC_FIND_DIR(infra, $incdirs, incdir) dnl the directory name to look for, the list of paths to check and dnl the variable with the result. AC_DEFUN(AC_FIND_DIR,[ $3="" for i in $2; do if test -d "$i/$1"; then $3=$i break fi done ]) dnl ==================================================================== dnl Work out details of the Tcl/tk installation that should be used. dnl In theory this is simple: when Tcl is installed in <tcl_prefix> dnl (usually /usr) there should be a file <tcl_prefix>/lib/tclConfig.sh dnl which defines exactly how to build Tcl-based applications. Of course dnl Tcl may be installed anywhere, not just in /usr, so it is necessary dnl to do some searching. There is a command-line argument dnl --with-tcl=<path> to specify the Tcl installation, so the macro dnl can search for <with_tcl>/lib/tclConfig.sh, <prefix>/lib/tclConfig.sh dnl and /usr/lib/tclConfig.sh dnl dnl Unfortunately not all systems use this convention. For example, dnl at the time of writing Debian installs tclConfig.sh in a versioned dnl subdirectory /usr/lib/tcl8.3/tclConfig.sh. Hence there is an dnl additional argument --with-tcl-version=<vsn> which is used to dnl extend the search path. dnl dnl For VC++ builds the situation is different again. Tcl may be dnl installed anywhere, so the data in tclConfig.sh is not useful dnl (and that file may not be provided at all). Instead --with-tcl dnl must be used to specify the path. Alternatively separate paths dnl for headers and libraries can be specified using --with-tcl-header dnl and --with-tcl-lib. Usually it will also be necessary to specify dnl the library version number using --with-tcl-version. dnl This adds two main command-line options, --with-tcl=<prefix> to dnl specify the Tcl install directory, and --with-tcl-version=<vsn> dnl to control which version of Tcl should be used. For finer-grained dnl control there are additional options --with-tcl-header and dnl --with-tcl-version. It is assumed that Tcl and Tk are installed dnl in the same place. dnl dnl On Unix systems and under cygwin there should be a file dnl $(tcl_prefix)/lib/tclConfig.sh containing all the information dnl needed for Tcl. This file is consulted and the appropriate dnl variables extracted. Similar information for Tk lives in dnl tkConfig.sh. As a useful side effect all variables defined dnl in those scripts can be accessed. dnl dnl To confuse matters, subtly different naming conventions are used dnl under Unix and NT. Under Unix the Tcl library will be called dnl libtcl8.0.a, libtcl8.1.a, etc. with a dot between the major and dnl minor version. Under NT (including cygwin) the library will be dnl called tcl80.lib, tcl81.lib, libtcl80.a, libtcl81.a, etc. dnl without a dot. dnl dnl Currently this macro assumes that Tcl is preinstalled, and not dnl built alongside eCos. Specifically the macro checks that dnl tcl.h can be found, plus on Unix systems tclConfig.sh and dnl tkConfig.sh as well. dnl dnl This macro updates the build-related variables ecos_INCLUDES, dnl ecos_LDADD, and ecos_LIBS. The latter assumes the application dnl only needs Tcl. If Tk is needed as well then the variable dnl ecos_tklibs should be used in addition. AC_DEFUN(ECOS_PATH_TCL, [ AC_REQUIRE([ECOS_PROG_MSVC]) AC_REQUIRE([AC_CYGWIN]) ecos_tk_libs="" ecos_tk_libdir="" dnl Where is the Tcl installation, and what version should be used? AC_MSG_CHECKING(for Tcl installation) AC_ARG_WITH(tcl,[ --with-tcl=<path> location of Tcl header and libraries]) AC_ARG_WITH(tcl-version,[ --with-tcl-version=<vsn> version of Tcl to be used]) dnl If using VC++ then there are no sensible default directories dnl to search for a Tcl installation. Instead the user must dnl supply either --with-tcl, or both --with-tcl-header and dnl --with-tcl-lib. dnl dnl Also when using VC++ there is no tclConfig.sh file to dnl consult about which libraries are needed. Instead that dnl information is hard-wired here. if test "${MSVC}" = "yes" ; then AC_ARG_WITH(tcl-header,[ --with-tcl-header=<path> location of Tcl header]) AC_ARG_WITH(tcl-lib,[ --with-tcl-lib=<path> location of Tcl libraries]) ecos_tcl_incdir="" ecos_tcl_libdir="" if test "${with_tcl_version+set}" != set ; then AC_MSG_ERROR(You must specify a Tcl version using --with-tcl-version=<vsn>) fi if test "${with_tcl_header+set}" = set ; then ecos_tcl_incdir=${with_tcl_header} elif test "${with_tcl+set}" = set ; then ecos_tcl_incdir="${with_tcl}/include" else AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl=<path> or --with-tcl-header=<path>) fi if test "${with_tcl_lib+set}" = set; then ecos_tcl_libdir=${with_tcl_lib} elif test "${with_tcl+set}" = set; then ecos_tcl_libdir="${with_tcl}/lib" else AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl=<path> or --with-tcl-lib=<path>) fi dnl Sanity check, make sure that there is a tcl.h header file. dnl If not then there is no point in proceeding. if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then AC_MSG_ERROR([unable to locate Tcl header file tcl.h]) fi ECOS_MSVC_PATH(ecos_tcl_incdir) ECOS_MSVC_PATH(ecos_tcl_libdir) ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_tcl_incdir}\"" ecos_LIBS="${ecos_LIBS} tcl${with_tcl_version}.lib" ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_tcl_libdir}\"" dnl FIXME: what libraries are needed for a tk application under VC++? dnl and can the version be determined more accurately? ecos_tk_libs="" else dnl Try to find tclConfig.sh possibles="" if test "${with_tcl+set}" = set ; then possibles="${with_tcl}/lib" if test "${with_tcl_version+set}" = set ; then possibles="${possibles} ${with_tcl}/lib/tcl${with_tcl_version}" fi fi possibles="${possibles} ${prefix}/lib" if test "${with_tcl_version+set}" = set ; then possibles="${possibles} ${prefix}/lib/tcl${with_tcl_version}" fi possibles="${possibles} /usr/lib" if test "${with_tcl_version+set}" = set ; then possibles="${possibles} /usr/lib/tcl${with_tcl_version}" fi AC_FIND_FILE("tclConfig.sh", ${possibles}, tclconfig) if test \! -r "${tclconfig}/tclConfig.sh" ; then AC_MSG_ERROR(unable to locate Tcl configuration file tclConfig.sh) else . ${tclconfig}/tclConfig.sh dnl Now we need to figure out where to find the Tcl header files. dnl tclConfig.sh may define a variable TCL_INC_DIR, otherwise dnl use TCL_PREFIX/include if test -z "${TCL_INC_DIR}" ; then ecos_tcl_incdir="${TCL_PREFIX}/include" else ecos_tcl_incdir="${TCL_INC_DIR}" fi if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then AC_MSG_ERROR(unable to locate Tcl header file tcl.h) else dnl On Unix systems -I/usr/include is unnecessary, and can dnl cause problems on hosts where gcc is not the platform's dnl default compiler because of the use of unfixed headers. dnl Hence it is explicitly removed here. if test "${ecos_tcl_incdir}" != "/usr/include" ; then ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_tcl_incdir}" fi fi dnl There should be a variable TCL_LIB_SPEC which defines dnl exactly how to link with Tcl. Unfortunately this is not dnl 100% guaranteed, so a backup solution is still needed. dnl NOTE: there is also TCL_LIBS defining additional libraries dnl such as -ldl. That may have to be added to ecos_LIBS. if test -z "${TCL_LIB_SPEC}" -a "${with_tcl_version+set}" = set ; then AC_FIND_FILE("libtcl${with_tcl_version}.a", ${possibles}, libtcl) if test -r "${libtcl}/libtcl${with_tcl_version}.a" ; then TCL_LIB_SPEC="-L${libtcl} -ltcl${with_tcl_version}" fi fi if test -z "${TCL_LIB_SPEC}" ; then AC_FIND_FILE("libtcl.a", ${possibles}, libtcl) if test -r "${libtcl}/libtcl.a" ; then TCL_LIB_SPEC="-L${libtcl} -ltcl" fi fi if test -z "${TCL_LIB_SPEC}" ; then AC_MSG_ERROR(${tclconfig}/tclConfig.sh does not define TCL_LIB_SPEC, and unable to find libtcl.a) fi ecos_LIBS="${ecos_LIBS} ${TCL_LIB_SPEC}" dnl Next, look for tkConfig.sh possibles=`echo ${possibles} | sed -e 's,tcl,tk,g'` AC_FIND_FILE("tkConfig.sh", ${possibles}, tkconfig) if test \! -r "${tkconfig}/tkConfig.sh" ; then AC_MSG_ERROR(unable to locate Tk config file tkConfig.sh) else . ${tkconfig}/tkConfig.sh if test -z "${TK_INC_DIR}" ; then if test "${TK_PREFIX}" = "/usr" ; then ecos_tk_includes="${TK_XINCLUDES}" else ecos_tk_includes="-I${TK_PREFIX}/include ${TK_XINCLUDES}" fi else ecos_tk_includes="-I${TK_INC_DIR} ${TK_XINCLUDES}" fi dnl As with TCL_LIB_SPEC, TK_LIB_SPEC may be empty if test -z "${TK_LIB_SPEC}" -a "${with_tcl_version+set}" = set ; then AC_FIND_FILE("libtk${with_tcl_version}.a", ${possibles}, libtk) if test -r "${libtk}/libtk${with_tcl_version}.a" ; then TK_LIB_SPEC="-L${libtk} -ltk${with_tcl_version}" fi fi if test -z "${TK_LIB_SPEC}" ; then AC_FIND_FILE("libtk.a", ${possibles}, libtk) if test -r "${libtk}/libtk.a" ; then TK_LIB_SPEC="-L${libtk} -ltk" fi fi if test -z "${TK_LIB_SPEC}" ; then AC_MSG_ERROR(${tkconfig}/tkConfig.sh does not define TK_LIB_SPEC, and unable to find libtk.a) fi ecos_tk_libs="${TK_LIB_SPEC} ${TK_LIBS}" fi fi fi AC_MSG_RESULT([-I${ecos_tcl_incdir} ${TCL_LIB_SPEC}]) AC_SUBST(ecos_tk_includes) AC_SUBST(ecos_tk_libs) ]) dnl ==================================================================== dnl Search for the infrastructure headers. Usually these can be picked dnl up from host/infra in the build tree. This macro updates dnl ecos_INCLUDES, ecos_LDADD and ecos_LIBS appropriately. In addition dnl it defines new variables ecos_infra_incdir and ecos_infra_libdir, dnl useful for listing explicit dependencies. dnl dnl This macro should only be used in configure scripts that run after dnl the infrastructure has been configured because it relies on the dnl infra directory already having been created in the build tree. AC_DEFUN(ECOS_PATH_INFRA, [ AC_MSG_CHECKING([for eCos host-side infrastructure]) dnl Where are we in the build tree? First assume that we are in the host dnl tree, thus allowing configury of just the host-side. If that fails dnl assume we can be anywhere. infra_builddir="" possibles=".. ../.. ../../.. ../../../.. ../../../../.." AC_FIND_DIR("infra", ${possibles}, infra_builddir) if test "${infra_builddir}" = "" ; then possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" AC_FIND_DIR("infra", ${possibles}, infra_builddir) fi if test "${infra_builddir}" != "" ; then infra_builddir="${infra_builddir}/infra" infra_builddir=`cd ${infra_builddir} && /bin/pwd` fi ecos_infra_incdir="" ecos_infra_libdir="" ecos_infra_libs="" AC_ARG_WITH(infra-header,[ --with-infra-header=<path> location of eCos infrastructure headers]) AC_ARG_WITH(infra-lib,[ --with-infra-lib=<path> location of eCos infrastructure library]) AC_ARG_WITH(infra,[ --with-infra=<path> location of eCos infrastructure installation]) if test "${with_infra_header+set}" = "set"; then ecos_infra_incdir="${with_infra_header}" elif test "${with_infra+set}" = "set"; then ecos_infra_incdir="${with_infra}/include" elif test "${infra_builddir}" != "" ; then ecos_infra_incdir="${infra_builddir}" else AC_MSG_ERROR([infrastructure headers not found]) fi if test "${MSVC}" = "yes" ; then ecos_msvc_infra_incdir=${ecos_infra_incdir} ECOS_MSVC_PATH(ecos_msvc_infra_incdir) ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_infra_incdir}\"" else ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_infra_incdir}" fi if test "${with_infra_lib+set}" = "set"; then ecos_infra_libdir="${with_infra_lib}" elif test "${with_infra+set}" = "set"; then ecos_infra_libdir="${with_infra}/lib" elif test "${infra_builddir}" != "" ; then ecos_infra_libdir="${infra_builddir}" else AC_MSG_ERROR([infrastructure library not found]) fi if test "${MSVC}" = "yes" ; then ecos_msvc_infra_libdir=${ecos_infra_libdir} ECOS_MSVC_PATH(ecos_msvc_infra_libdir) ecos_LIBS="${ecos_LIBS} cyginfra.lib" ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_infra_libdir}\"" else ecos_LIBS="${ecos_LIBS} -lcyginfra" ecos_LDADD="${ecos_LDADD} -L${ecos_infra_libdir}" fi AC_SUBST(ecos_infra_incdir) AC_SUBST(ecos_infra_libdir) AC_MSG_RESULT(-I[${ecos_infra_incdir} -L${ecos_infra_libdir}]) ]) dnl ==================================================================== dnl And a very similar macro for libcdl, but note that the headers dnl are in the source tree rather than the build tree. AC_DEFUN(ECOS_PATH_LIBCDL, [ AC_MSG_CHECKING([for libcdl]) dnl Where are we in the source tree? libcdl_srcdir="" possibles="${srcdir}/.. ${srcdir}/../.. ${srcdir}/../../.. ${srcdir}/../../../.. ${srcdir}/../../../../.." AC_FIND_DIR("libcdl", ${possibles}, libcdl_srcdir) if test "${libcdl_srcdir}" = "" ; then possibles="${srcdir}/../host ${srcdir}/../../host ${srcdir}/../../../host ${srcdir}/../../../../host ${srcdir}/../../../../../host ${srcdir}/../../../../../../host" AC_FIND_DIR("libcdl", ${possibles}, libcdl_srcdir) fi if test "${libcdl_srcdir}" != "" ; then libcdl_srcdir="${libcdl_srcdir}/libcdl" libcdl_srcdir=`cd ${libcdl_srcdir} && /bin/pwd` fi dnl And where are we in the build tree? libcdl_builddir="" possibles=".. ../.. ../../.. ../../../.. ../../../../.." AC_FIND_DIR("libcdl", ${possibles}, libcdl_builddir) if test "${libcdl_builddir}" = "" ; then possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" AC_FIND_DIR("libcdl", ${possibles}, libcdl_builddir) fi if test "${libcdl_builddir}" != "" ; then libcdl_builddir="${libcdl_builddir}/libcdl" libcdl_builddir=`cd ${libcdl_builddir} && /bin/pwd` fi ecos_libcdl_incdir="" ecos_libcdl_libdir="" ecos_libcdl_libs="" AC_ARG_WITH(libcdl-header,[ --with-libcdl-header=<path> location of eCos libcdl headers]) AC_ARG_WITH(libcdl-lib,[ --with-libcdl-lib=<path> location of eCos libcdl library]) AC_ARG_WITH(libcdl,[ --with-libcdl=<path> location of eCos libcdl installation]) if test "${with_libcdl_header+set}" = "set"; then ecos_libcdl_incdir="${with_libcdl_header}" elif test "${with_libcdl+set}" = "set"; then ecos_libcdl_incdir="${with_libcdl}/include" elif test "${libcdl_srcdir}" != "" ; then ecos_libcdl_incdir="${libcdl_srcdir}" fi if test \! -r "${ecos_libcdl_incdir}/cdl.hxx" ; then AC_MSG_ERROR([libcdl headers not found]) fi if test "${MSVC}" = "yes" ; then ecos_msvc_libcdl_incdir="${ecos_libcdl_incdir}" ECOS_MSVC_PATH(ecos_msvc_libcdl_incdir) ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_libcdl_incdir}\"" else ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_libcdl_incdir}" fi if test "${with_libcdl_lib+set}" = "set"; then ecos_libcdl_libdir="${with_libcdl_lib}" elif test "${with_libcdl+set}" = "set"; then ecos_libcdl_libdir="${with_libcdl}/lib" elif test "${libcdl_builddir}" != "" ; then ecos_libcdl_libdir="${libcdl_builddir}" else AC_MSG_ERROR([libcdl library not found]) fi if test "${MSVC}" = "yes" ; then ecos_msvc_libcdl_libdir=${ecos_libcdl_libdir} ECOS_MSVC_PATH(ecos_msvc_libcdl_libdir) ecos_LIBS="${ecos_LIBS} cdl.lib" ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_libcdl_libdir}\"" else ecos_LIBS="${ecos_LIBS} -lcdl" ecos_LDADD="${ecos_LDADD} -L${ecos_libcdl_libdir}" fi AC_SUBST(ecos_libcdl_incdir) AC_SUBST(ecos_libcdl_libdir) AC_MSG_RESULT([-I${ecos_libcdl_incdir} -L${ecos_libcdl_libdir}]) ]) dnl ==================================================================== dnl Look for a 64 bit data type. It is necessary to check both C and C++ dnl compilers. dnl dnl A better implementation would check whether or not AC_PROG_CC and dnl AC_PROG_CXX have been invoked and only test the appropriate dnl compiler. dnl dnl When cross-compiling, default to long long on the assumption that dnl gcc/g++ must be used and long long is likely to be the 64 bit data dnl type. This is not guaranteed, but sufficiently likely to meet dnl the requirements for the time being. The CHECK_SIZEOF() macro dnl might be another way to get the desired information. AC_DEFUN(ECOS_TYPE_64bit, [ AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_PROG_CXX]) AC_CACHE_CHECK("for a 64 bit data type",ecos_cv_type_64bit,[ for type in "long" "long long" "__int64"; do AC_LANG_SAVE AC_LANG_C AC_TRY_RUN([ main() { return 8 != sizeof($type); } ],ctype_64bit=$type,ctype_64bit="unknown",ctype_64bit="long long") AC_LANG_CPLUSPLUS AC_TRY_RUN([ int main(int argc, char ** argv) { return 8 != sizeof($type); } ],cxxtype_64bit=$type,cxxtype_64bit="unknown",cxxtype_64bit="long long") AC_LANG_RESTORE if test "${ctype_64bit}" = "${type}" -a "${cxxtype_64bit}" = "${type}"; then ecos_cv_type_64bit="${type}" break fi done ]) if test "${ecos_cv_type_64bit}" = ""; then AC_MSG_ERROR(Unable to figure out how to do 64 bit arithmetic) else if test "${ecos_cv_type_64bit}" != "long long"; then AC_DEFINE_UNQUOTED(cyg_halint64,${ecos_cv_type_64bit}) AC_DEFINE_UNQUOTED(cyg_halcount64,${ecos_cv_type_64bit}) fi fi ]) dnl ==================================================================== dnl Check that both the C and C++ compilers support __PRETTY_FUNCTION__ AC_DEFUN(ECOS_C_PRETTY_FUNCTION,[ AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_PROG_CXX]) AC_CACHE_CHECK("for __PRETTY_FUNCTION__ support",ecos_cv_c_pretty_function,[ AC_LANG_SAVE AC_LANG_C AC_TRY_LINK( [#include <stdio.h>], [puts(__PRETTY_FUNCTION__);], c_ok="yes", c_ok="no" ) AC_LANG_CPLUSPLUS AC_TRY_LINK( [#include <cstdio>], [puts(__PRETTY_FUNCTION__);], cxx_ok="yes", cxx_ok="no" ) AC_LANG_RESTORE if test "${c_ok}" = "yes" -a "${cxx_ok}" = "yes"; then ecos_cv_c_pretty_function="yes" fi ]) if test "${ecos_cv_c_pretty_function}" = "yes"; then AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO) fi ]) dnl ==================================================================== dnl During installation eCos package-specific host-side code should be dnl versioned in the same way as the packages themselves, allowing dnl different versions to coexist in one installation. This is analogous dnl to having multiple versions of a shared library installed so that dnl applications can load whichever one they were linked with. dnl dnl To support all this the host-side code needs access to a number dnl of directory names: dnl ECOS_REPOSITORY e.g. ~/ecc/ecc dnl PACKAGE_DIR e.g. hal/synth/arch dnl PACKAGE_VERSION e.g. current dnl PACKAGE_INSTALL e.g. hal/synth/arch/current dnl dnl These, together with the standard variable libexecdir, allow dnl the host-side code to navigate around both source and install dnl trees. AC_DEFUN(ECOS_PACKAGE_DIRS,[ dnl srcdir will be something like <path>/packages/<package_path>/<version>/host package_dir=`cd ${srcdir} && /bin/pwd` PACKAGE_VERSION=`dirname ${package_dir}` PACKAGE_VERSION=`basename ${PACKAGE_VERSION}` dnl Now look for an "acsupport" directory as a good way of identifying dnl the root of the repository. Assume that this does not clash with dnl any real packages in the repository. Also assume that no silly games dnl are being played with symlinks. package_dir=`dirname ${package_dir}` package_dir=`dirname ${package_dir}` possibles="${package_dir}/.. ${package_dir}/../.. ${package_dir}/../../.. ${package_dir}/../../../.." possibles="${possibles} ${package_dir}/../../../../.. ${package_dir}/../../../../../.." AC_FIND_DIR("acsupport", ${possibles}, repository_root) if test "${repository_root}" = "" ; then AC_MSG_ERROR([Failed to identify this package's position within the eCos repository]) fi dnl repository_root will still contain the ..'s, instead of an absolute path ECOS_REPOSITORY=`cd "${repository_root}/packages/pkgconf/.." && /bin/pwd` dnl Now we have two absolute paths, so just remove one from the other PACKAGE_DIR=`echo ${package_dir} | sed -e "s:${ECOS_REPOSITORY}/::"` dnl To avoid creating too many subdirectories on the host-side, turn dnl e.g. hal/synth/arch into hal_synth_arch. Theoretically this could dnl go wrong because multiple packages could map onto the same string, dnl but in practice there should be a net reduction in complexity. dnl bartv: / to _ conversion disabled for now, 5 March 2002 PACKAGE_INSTALL="${PACKAGE_DIR}/${PACKAGE_VERSION}" dnl PACKAGE_INSTALL=`echo ${PACKAGE_INSTALL} | sed -e "s:/:_:g"` AC_SUBST(ECOS_REPOSITORY) AC_SUBST(PACKAGE_DIR) AC_SUBST(PACKAGE_VERSION) AC_SUBST(PACKAGE_INSTALL) ])
Go to most recent revision | Compare with Previous | Blame | View Log