Subversion Repositories openrisc

dnl Process this file with aclocal to get an aclocal.m4 file. Then
dnl process that with autoconf.
dnl ====================================================================
dnl
dnl     acinclude.m4
dnl
dnl     Various autoconf macros that are shared between different
dnl     eCos packages.
dnl
dnl ====================================================================
dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN####                                       
dnl -------------------------------------------                             
dnl This file is part of the eCos host tools.                               
dnl Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
dnl
dnl This program is free software; you can redistribute it and/or modify    
dnl it under the terms of the GNU General Public License as published by    
dnl the Free Software Foundation; either version 2 or (at your option) any  
dnl later version.                                                          
dnl
dnl This program is distributed in the hope that it will be useful, but     
dnl WITHOUT ANY WARRANTY; without even the implied warranty of              
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       
dnl General Public License for more details.                                
dnl
dnl You should have received a copy of the GNU General Public License       
dnl along with this program; if not, write to the                           
dnl Free Software Foundation, Inc., 51 Franklin Street,                     
dnl Fifth Floor, Boston, MA  02110-1301, USA.                               
dnl -------------------------------------------                             
dnl ####ECOSHOSTGPLCOPYRIGHTEND####                                         
dnl ====================================================================
dnl#####DESCRIPTIONBEGIN####
dnl
dnl Author(s):  bartv
dnl Contact(s): bartv
dnl Date:       1998/12/16
dnl Version:    0.01
dnl
dnl####DESCRIPTIONEND####
dnl ====================================================================
 
dnl ====================================================================
dnl Ensure that configure is not being run in the source tree, i.e.
dnl that a separate build tree has been created. This is not absolutely
dnl necessary at the time of writing but may become so in future, and
dnl is good practice.
 
AC_DEFUN([ECOS_CHECK_BUILD_ne_SRC],[
  AC_MSG_CHECKING([that a separate build tree is being used])
  ecos_cwd=`/bin/pwd`
  if test "${srcdir}" = "." ; then
    srcdir=${ecos_cwd}
  fi
  if test "${ecos_cwd}" = "${srcdir}" ; then
    AC_MSG_RESULT([no])
    AC_MSG_ERROR([This configure script should not be run inside the source tree. Instead please use a separate build tree])
  else
    AC_MSG_RESULT([yes])
  fi
])
 
dnl ====================================================================
dnl The AM_INIT_AUTOMAKE() will define a symbol VERSION for the
dnl package's version number. Unfortunately this symbol is rather
dnl hard to share if several different packages are involved, so this
dnl macro is used to define an alternative symbol
 
AC_DEFUN([ECOS_SUBST_VERSION],[
  AC_REQUIRE([AM_INIT_AUTOMAKE])
  ifelse($#,1,,AC_MSG_ERROR([Invalid number of arguments passed to ECOS SUBST_VERSION]))
  AC_DEFINE_UNQUOTED($1, "$VERSION", "eCos host-side package version")
])
 
dnl --------------------------------------------------------------------
dnl Convert a cygwin pathname to something acceptable to VC++ (but
dnl still invoked from bash and cygwin's make). This means using
dnl the cygpath utility and then translating any backslashes into
dnl forward slashes to avoid confusing make.
 
AC_DEFUN([ECOS_MSVC_PATH], [
dnl    AC_REQUIRE([ECOS_PROG_MSVC])
  ifelse($#, 1, , AC_MSG_ERROR("Invalid number of arguments passed to ECOS MSVC_PATH"))
  if test "${MSVC}" = "yes" ; then
    $1=`cygpath -w ${$1} | tr \\\\\\\\ /`
  fi
])
 
dnl ====================================================================
dnl An internal utility to define eCos variants of various compilation
dnl related flags. The aim is to avoid messing with CFLAGS, LIBS, and
dnl so on because those are used for feature tests as well as for
dnl passing on to the application.
AC_DEFUN([ECOS_PROG_DEFINE_COMPILER_FLAGS],[
  ecos_CFLAGS=""
  ecos_CXXFLAGS=""
  ecos_LDADD=""
  ecos_INCLUDES=""
  ecos_LIBS=""
  AC_SUBST(ecos_CFLAGS)
  AC_SUBST(ecos_CXXFLAGS)
  AC_SUBST(ecos_LDADD)
  AC_SUBST(ecos_INCLUDES)
  AC_SUBST(ecos_LIBS)
])
 
dnl For historical reasons some of the eCos host-side software can be
dnl built with Visual C++ as well as g++. The user can specify this
dnl at configure time using CC=cl, where cl.exe is the compiler driver.
dnl This macro will set the variable MSVC to "yes" or to "no" depending
dnl on whether or not VC++ is being used, analogous to the variable
dnl GCC set by AC_PROG_CC. It provides support for an automake
dnl conditional thus allowing the makefile to adapt somewhat to the
dnl compiler being used. Finally it fills in the ECOS_INCLUDES,
dnl ECOS_LIBS and ECOS_LDADD variables with suitable initial values.
 
AC_DEFUN([ECOS_PROG_MSVC],[
  AC_REQUIRE([AC_PROG_CC])
  AC_REQUIRE([AC_PROG_CXX])
  AC_REQUIRE([ECOS_PROG_DEFINE_COMPILER_FLAGS])
 
  AC_MSG_CHECKING("for Visual C++")
  MSVC="no";
  if test "${CC}" = "cl" ; then
     MSVC="yes"
     CXX="cl"
     MSVC_SRCDIR=${srcdir}
     ECOS_MSVC_PATH(MSVC_SRCDIR)
     AC_SUBST(MSVC_SRCDIR)
     ecos_INCLUDES="${ecos_INCLUDES} \"-I${MSVC_SRCDIR}\""
     ecos_LDADD="-link"
     ecos_LIBS="advapi32.lib"
  fi
  AM_CONDITIONAL(MSVC, test "${MSVC}" = "yes")
  if test "${MSVC}" = "yes" ; then
    AC_MSG_RESULT([unfortunately yes])
  else
    AC_MSG_RESULT([no])
  fi
])
 
dnl ====================================================================
dnl Set up sensible flags for the various different compilers. This
dnl is achieved by manipulating AM-CFLAGS and AM-CXXFLAGS via a subst,
dnl plus undoing the setting of CFLAGS and CXXFLAGS done by
dnl the AC_PROC_CC and AC_PROG_CXX macros (e.g. setting the default
dnl compilation flags to -O2). Note that this relies
dnl on knowing about the internals of those macros.
dnl
dnl There is little point in checking the cache: this macro does
dnl not do any feature tests so checking the cache would probably
dnl be more expensive than doing the work here.
dnl
dnl For now the only supported compilers are gcc/g++ and VC++. Attempts
dnl to use another compiler will result in an error at configure-time.
AC_DEFUN([ECOS_PROG_STANDARD_COMPILER_FLAGS], [
  AC_REQUIRE([AC_PROG_CC])
  AC_REQUIRE([AC_PROG_CXX])
  AC_REQUIRE([ECOS_PROG_DEFINE_COMPILER_FLAGS])
  AC_REQUIRE([ECOS_PROG_MSVC])
 
  AC_MSG_CHECKING("the default compiler flags")
 
  dnl Add a user-settable flag to control whether or debugging info is
  dnl incorporated at compile-time.
  ecosflags_enable_debug="no"
  AC_ARG_ENABLE(debug,[ --enable-debug           do a debug rather than a release build],
  [case "${enableval}" in
     yes) ecosflags_enable_debug="yes" ;;
     *)   ecosflags_enable_debug="no" ;;
  esac])
 
  dnl For VC++ builds also provide a flag for ANSI vs. unicode builds.
  dnl For now this does not actually affect the compiler flags.
  dnl NOTE: there may also have to be a flag to control whether or
  dnl the VC++ multi-threading flags are enabled.
  ecosflags_enable_ansi="no"
  if test "${MSVC}" = "yes" ; then
    AC_ARG_ENABLE(ansi,[ --enable-ansi            do an ANSI rather than a unicode build],
    [case "${enableval}" in
       yes) ecosflags_enable_ansi="yes" ;;
       *)   ecosflags_enable_ansi="no" ;;
    esac])
  fi
 
  dnl Now we know what the user is after.
  if test "${GCC}" = "yes" ; then
    ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs"
    ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wcast-qual -Woverloaded-virtual"
  elif test "${MSVC}" = "yes" ; then
    ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3"
    ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX"
  else
    AC_MSG_ERROR("default flags for ${CC} are not known")
  fi
 
  dnl Choose between debugging and optimization.
  if test "${ecosflags_enable_debug}" = "yes" ; then
    if test "${GCC}" = "yes" ; then
      ecos_CFLAGS="${ecos_CFLAGS} -g -O0"
      ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0"
    elif test "${MSVC}" = "yes" ; then
      ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi"
      ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi"
    fi
  else
    dnl With older versions of g++ building the host-side tools with
    dnl -O2 took forever. These problems should now have gone away.
    if test "${GCC}" = "yes" ; then
      ecos_CFLAGS="${ecos_CFLAGS} -O2"
      ecos_CXXFLAGS="${ecos_CXXFLAGS} -O2"
    elif test "${MSVC}" = "yes" ; then
      ecos_CFLAGS="${ecos_CFLAGS} -MD -O2"
      ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2"
    fi
  fi
 
  CFLAGS="${ac_save_CFLAGS}"
  CXXFLAGS="${ac_save_CXXFLAGS}"
 
  AC_MSG_RESULT(done)
])
 
dnl --------------------------------------------------------------------
dnl User-settable options for assertions and tracing.
dnl
dnl The settable options are:
dnl   --disable-asserts
dnl   --disable-preconditions
dnl   --disable-postconditions
dnl   --disable-invariants
dnl   --disable-loopinvariants
dnl   --disable-tracing
dnl   --disable-fntracing
 
AC_DEFUN([ECOS_ARG_INFRASTRUCTURE], [
 
  AC_REQUIRE([ECOS_PROG_STANDARD_COMPILER_FLAGS])
 
  if test "${ecosflags_enable_debug}" = "yes" ; then
    ecosinfra_asserts="yes"
    ecosinfra_preconditions="yes"
    ecosinfra_postconditions="yes"
    ecosinfra_invariants="yes"
    ecosinfra_loopinvariants="yes"
    ecosinfra_tracing="yes"
    ecosinfra_fntracing="yes"
  else
    ecosinfra_asserts="no"
    ecosinfra_preconditions="no"
    ecosinfra_postconditions="no"
    ecosinfra_invariants="no"
    ecosinfra_loopinvariants="no"
    ecosinfra_tracing="no"
    ecosinfra_fntracing="no"
  fi
 
  AC_ARG_ENABLE(asserts,[ --disable-asserts        disable all assertions],
    [case "${enableval}" in
      yes) ecosinfra_asserts="yes" ;;
      no)  ecosinfra_asserts="no"  ;;
      *)   AC_MSG_ERROR([bad value ${enableval} for disable-asserts option]) ;;
    esac])
  if test "${ecosinfra_asserts}" = "yes"; then
    AC_DEFINE(CYGDBG_USE_ASSERTS,[1],[assertions enabled])
  fi
 
  AC_ARG_ENABLE(preconditions, [ --disable-preconditions  disable a subset of the assertions],
    [case "${enableval}" in
      yes) ecosinfra_preconditions="yes" ;;
      no)  ecosinfra_preconditions="no"  ;;
      *)   AC_MSG_ERROR([bad value ${enableval} for disable-preconditions option]) ;;
    esac])
  if test "${ecosinfra_preconditions}" = "yes"; then
    AC_DEFINE(CYGDBG_INFRA_DEBUG_PRECONDITIONS,[1],[precondition asserts enabled])
  fi
 
  AC_ARG_ENABLE(postconditions, [ --disable-postconditions disable a subset of the assertions],
    [case "${enableval}" in
      yes) ecosinfra_postconditions="yes" ;;
      no)  ecosinfra_postconditions="no"  ;;
      *)   AC_MSG_ERROR([bad value ${enableval} for disable-postconditions option]) ;;
    esac])
  if test "${ecosinfra_postconditions}" = "yes"; then
    AC_DEFINE(CYGDBG_INFRA_DEBUG_POSTCONDITIONS,[1], [postcondition asserts enabled])
  fi
 
  AC_ARG_ENABLE(invariants, [ --disable-invariants     disable a subset of the assertions],
    [case "${enableval}" in
      yes) ecosinfra_invariants="yes" ;;
      no)  ecosinfra_invariants="no"  ;;
      *)   AC_MSG_ERROR([bad value ${enableval} for disable-invariants option]) ;;
    esac])
  if test "${ecosinfra_invariants}" = "yes"; then
    AC_DEFINE(CYGDBG_INFRA_DEBUG_INVARIANTS,[1],[invariant asserts enabled])
  fi
 
  AC_ARG_ENABLE(loopinvariants, [ --disable-loopinvariants disable a subset of the assertions],
    [case "${enableval}" in
      yes) ecosinfra_loopinvariants="yes" ;;
      no)  ecosinfra_loopinvariants="no"  ;;
      *)   AC_MSG_ERROR([bad value ${enableval} for disable-loopinvariants option]) ;;
    esac])
  if test "${ecosinfra_loopinvariants}" = "yes"; then
    AC_DEFINE(CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS,[1],[loop invariant asserts enabled])
  fi
 
  AC_ARG_ENABLE(tracing,[ --disable-tracing        disable tracing],
    [case "${enableval}" in
      yes) ecosinfra_tracing="yes" ;;
      no)  ecosinfra_tracing="no"  ;;
      *)   AC_MSG_ERROR([bad value ${enableval} for disable-tracing option]) ;;
    esac])
  if test "${ecosinfra_tracing}" = "yes"; then
    AC_DEFINE(CYGDBG_USE_TRACING,[1],[tracing enabled])
  fi
 
  AC_ARG_ENABLE(fntracing,[ --disable-fntracing      disable function entry/exit tracing],
    [case "${enableval}" in
       yes) ecosinfra_fntracing="yes" ;;
       no)  ecosinfra_fntracing=no  ;;
       *)   AC_MSG_ERROR([bad value ${enableval} for disable-fntracing option]) ;;
  esac])
  if test "${ecosinfra_fntracing}" = "yes"; then
    AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS,[1],[function entry/exit reporting enabled])
  fi
])
 
dnl ====================================================================
dnl Inspired by KDE's autoconfig
dnl This macro takes three Arguments like this:
dnl AC_FIND_FILE(foo.h, $incdirs, incdir)
dnl the filename to look for, the list of paths to check and
dnl the variable with the result.
 
AC_DEFUN([AC_FIND_FILE],[
  $3=""
  for i in $2; do
    if test -r "$i/$1"; then
      $3=$i
      break
    fi
  done
])
 
dnl ====================================================================
dnl Variation of the above.
dnl This macro takes three Arguments like this:
dnl AC_FIND_DIR(infra, $incdirs, incdir)
dnl the directory name to look for, the list of paths to check and
dnl the variable with the result.
 
AC_DEFUN([AC_FIND_DIR],[
  $3=""
  for i in $2; do
    if test -d "$i/$1"; then
      $3=$i
      break
    fi
  done
])
 
dnl ====================================================================
dnl Work out details of the Tcl/tk installation that should be used.
dnl In theory this is simple: when Tcl is installed in <tcl_prefix>
dnl (usually /usr) there should be a file <tcl_prefix>/lib/tclConfig.sh
dnl which defines exactly how to build Tcl-based applications. Of course
dnl Tcl may be installed anywhere, not just in /usr, so it is necessary
dnl to do some searching. There is a command-line argument
dnl --with-tcl=<path> to specify the Tcl installation, so the macro
dnl can search for <with_tcl>/lib/tclConfig.sh, <prefix>/lib/tclConfig.sh
dnl and /usr/lib/tclConfig.sh
dnl
dnl Unfortunately not all systems use this convention. For example,
dnl at the time of writing Debian installs tclConfig.sh in a versioned
dnl subdirectory /usr/lib/tcl8.3/tclConfig.sh. Hence there is an
dnl additional argument --with-tcl-version=<vsn> which is used to
dnl extend the search path.
dnl
dnl For VC++ builds the situation is different again. Tcl may be
dnl installed anywhere, so the data in tclConfig.sh is not useful
dnl (and that file may not be provided at all). Instead --with-tcl
dnl must be used to specify the path. Alternatively separate paths
dnl for headers and libraries can be specified using --with-tcl-header
dnl and --with-tcl-lib. Usually it will also be necessary to specify
dnl the library version number using --with-tcl-version.
 
dnl This adds two main command-line options, --with-tcl=<prefix> to
dnl specify the Tcl install directory, and --with-tcl-version=<vsn>
dnl to control which version of Tcl should be used. For finer-grained
dnl control there are additional options --with-tcl-header and
dnl --with-tcl-version. It is assumed that Tcl and Tk are installed
dnl in the same place.
dnl
dnl On Unix systems and under cygwin there should be a file
dnl $(tcl_prefix)/lib/tclConfig.sh containing all the information
dnl needed for Tcl. This file is consulted and the appropriate
dnl variables extracted. Similar information for Tk lives in
dnl tkConfig.sh. As a useful side effect all variables defined
dnl in those scripts can be accessed.
dnl
dnl To confuse matters, subtly different naming conventions are used
dnl under Unix and NT. Under Unix the Tcl library will be called
dnl libtcl8.0.a, libtcl8.1.a, etc. with a dot between the major and
dnl minor version. Under NT (including cygwin) the library will be
dnl called tcl80.lib, tcl81.lib, libtcl80.a, libtcl81.a, etc.
dnl without a dot.
dnl
dnl Currently this macro assumes that Tcl is preinstalled, and not
dnl built alongside eCos. Specifically the macro checks that
dnl tcl.h  can be found, plus on Unix systems tclConfig.sh and
dnl tkConfig.sh as well.
dnl
dnl This macro updates the build-related variables ecos_INCLUDES,
dnl ecos_LDADD, and ecos_LIBS. The latter assumes the application
dnl only needs Tcl. If Tk is needed as well then the variable
dnl ecos_tklibs should be used in addition.
 
AC_DEFUN([ECOS_PATH_TCL], [
 
  AC_REQUIRE([ECOS_PROG_MSVC])
 
  dnl Where is the Tcl installation, and what version should be used?
  dnl This macro is rather more verbose than usual because of the many
  dnl problems encountered over the years with Tcl installations.
  AC_MSG_CHECKING(for Tcl/Tk installation)
  AC_MSG_RESULT()
 
  AC_ARG_WITH(tcl,[ --with-tcl=<path>        location of Tcl header and libraries])
  AC_ARG_WITH(tcl,[ --with-tk=<path>         location of Tk header and libraries])
  AC_ARG_WITH(tcl-version,[ --with-tcl-version=<vsn> version of Tcl/Tk to be used])
 
  dnl If using VC++ then there are no sensible default directories
  dnl to search for a Tcl installation. Instead the user must
  dnl supply either --with-tcl, or both --with-tcl-header and
  dnl --with-tcl-lib.
  dnl
  dnl Also when using VC++ there is no tclConfig.sh file to
  dnl consult about which libraries are needed. Instead that
  dnl information is hard-wired here.
  if test "${MSVC}" = "yes" ; then
    AC_ARG_WITH(tcl-header,[ --with-tcl-header=<path> location of Tcl header])
    AC_ARG_WITH(tcl-lib,[ --with-tcl-lib=<path>    location of Tcl libraries])
    ecos_tcl_incdir=""
    ecos_tcl_libdir=""
    if test "${with_tcl_version+set}" != set ; then
      AC_MSG_ERROR(You must specify a Tcl version using --with-tcl-version=<vsn>)
    fi
    if test "${with_tcl_header+set}" = set ; then
      ecos_tcl_incdir=${with_tcl_header}
    elif test "${with_tcl+set}" = set ; then
      ecos_tcl_incdir="${with_tcl}/include"
    else
      AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl=<path> or --with-tcl-header=<path>)
    fi
    if test "${with_tcl_lib+set}" = set; then
        ecos_tcl_libdir=${with_tcl_lib}
    elif test "${with_tcl+set}" = set; then
        ecos_tcl_libdir="${with_tcl}/lib"
    else
        AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl=<path> or --with-tcl-lib=<path>)
    fi
 
    dnl Sanity check, make sure that there is a tcl.h header file.
    dnl If not then there is no point in proceeding.
    if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then
      AC_MSG_ERROR([unable to locate Tcl header file tcl.h])
    fi
 
    ECOS_MSVC_PATH(ecos_tcl_incdir)
    ECOS_MSVC_PATH(ecos_tcl_libdir)
    ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_tcl_incdir}\""
    ecos_LIBS="${ecos_LIBS} tcl${with_tcl_version}.lib"
    ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_tcl_libdir}\""
 
    dnl FIXME: what libraries are needed for a tk application under VC++?
    dnl        and can the version be determined more accurately?
    ecos_tk_libs=""
 
  else
    dnl ------------------------------------------------------------
    dnl Not Visual C++ so try to do things properly by finding and
    dnl using tclConfig.sh
    possibles=""
    if test "${with_tcl+set}" = set ; then
      possibles="${with_tcl}/lib"
      if test "${with_tcl_version+set}" = set ; then
        possibles="${possibles} ${with_tcl}/lib/tcl${with_tcl_version}"
      fi
    fi
    possibles="${possibles} ${prefix}/lib"
    if test "${with_tcl_version+set}" = set ; then
      possibles="${possibles} ${prefix}/lib/tcl${with_tcl_version}"
    fi
    possibles="${possibles} /usr/lib"
    if test "${with_tcl_version+set}" = set ; then
      possibles="${possibles} /usr/lib/tcl${with_tcl_version}"
    fi
    AC_MSG_NOTICE(looking for tclConfig.sh in ${possibles})
    AC_FIND_FILE("tclConfig.sh", ${possibles}, tclconfig)
    if test \! -r "${tclconfig}/tclConfig.sh" ; then
      AC_MSG_ERROR(unable to locate Tcl configuration file tclConfig.sh)
    else
      AC_MSG_NOTICE(found ${tclconfig}/tclConfig.sh)
      . ${tclconfig}/tclConfig.sh
 
      dnl Now we need to figure out where to find the Tcl header files.
      dnl tclConfig.sh may define a variable TCL_INCLUDE_SPEC or
      dnl TCL_INCLUDE_DIR, otherwise use TCL_PREFIX/include
      if test -n "${TCL_INCLUDE_SPEC}" ; then
        ecos_tcl_incdir="${TCL_INCLUDE_SPEC}"
	AC_MSG_NOTICE(trying TCL_INCLUDE_SPEC - looking for tcl.h in ${ecos_tcl_incdir})
      elif test -n "${TCL_INC_DIR}" ; then
        ecos_tcl_incdir="${TCL_INC_DIR}"
	AC_MSG_NOTICE(trying TCL_INC_DIR - looking for tcl.h in ${ecos_tcl_incdir})
      else            
        ecos_tcl_incdir="-I${TCL_PREFIX}/include"
	AC_MSG_WARN(no TCL_INCLUDE_SPEC or TCL_INC_DIR in tclConfig.sh)
	AC_MSG_NOTICE(fallback - looking for tcl.h in ${ecos_tcl_incdir})
      fi
      dnl But verify that the resulting incdir is valid.
      ecos_tcl_tmpdir=`echo ${ecos_tcl_incdir} | sed -e "s:-I::g"`
      if test \! -r "${ecos_tcl_tmpdir}/tcl.h" ; then
        AC_MSG_ERROR(unable to locate Tcl header file tcl.h)
      else
        dnl On Unix systems -I/usr/include is unnecessary, and can
        dnl cause problems on hosts where gcc is not the platform's
        dnl default compiler because of the use of unfixed headers.
        dnl Hence it is explicitly removed here.
	AC_MSG_NOTICE(using ${ecos_tcl_incdir})
        if test "${ecos_tcl_incdir}" != "-I/usr/include" ; then
          ecos_INCLUDES="${ecos_INCLUDES} ${ecos_tcl_incdir}"
        fi
      fi
 
      dnl There should be a variable TCL_LIB_SPEC which defines
      dnl exactly how to link with Tcl. Without that, try to search
      dnl for a libtcl.a
      ecos_tcl_libs=""
      if test -n "${TCL_LIB_SPEC}" ; then
        ecos_tcl_libs="${ecos_LIBS} ${TCL_LIB_SPEC}"
	AC_MSG_NOTICE(using TCL_LIB_SPEC ${TCL_LIB_SPEC})
      else
	AC_MSG_WARN(no TCL_LIB_SPEC in tclConfig.sh)
        if test "${with_tcl_version+set}" = set ; then
	  AC_MSG_NOTICE(fallback - looking for libtcl${with_tcl_version}.a in ${possibles})
          AC_FIND_FILE("libtcl${with_tcl_version}.a", ${possibles}, libtcl)
          if test -r "${libtcl}/libtcl${with_tcl_version}.a" ; then
              ecos_tcl_libs="-L${libtcl} -ltcl${with_tcl_version}"
	      AC_MSG_NOTICE(using ${ecos_tcl_libs})
          fi
        fi
        if test -z "${ecos_tcl_libs}" ; then
	  AC_MSG_NOTICE(fallback - looking for libtcl.a in ${possibles})
          AC_FIND_FILE("libtcl.a", ${possibles}, libtcl)
          if test -r "${libtcl}/libtcl.a" ; then
              ecos_tcl_libs="-L${libtcl} -ltcl"
	      AC_MSG_NOTICE(using ${ecos_tcl_libs})
          fi
        fi
      fi
 
      dnl If at this stage we have not found a libtcl.a, complain.
      if test -z "${ecos_tcl_libs}" ; then
        AC_MSG_ERROR(${tclconfig}/tclConfig.sh does not define TCL_LIB_SPEC, and unable to find libtcl.a)
      fi
 
      dnl tclConfig.sh may specify additional flags and libraries.
      if test -n "${TCL_LIBS}" ; then
        ecos_tcl_libs="${ecos_tcl_libs} ${TCL_LIBS}"
	AC_MSG_NOTICE(using additional libraries for Tcl ${TCL_LIBS})
      fi
      if test -n "${TCL_LD_FLAGS}" ; then
        ecos_tcl_libs="${ecos_tcl_libs} ${TCL_LD_FLAGS}"
	AC_MSG_NOTICE(using additional linker flags for Tcl ${TCL_LD_FLAGS})
      fi
      ecos_LIBS="${ecos_LIBS} ${ecos_tcl_libs}"
    fi
 
 
    dnl --------------------------------------------------------
    dnl We now repeat the exercise for tk and tkConfig.sh.
    dnl Typically this will be in a similar location to tclConfig.sh,
    dnl but allow for separate 
    dnl we assume that the Tk installation is in a similar
    dnl location to the Tcl one, but allow for different ones
    dnl just in case.
    possibles=""
    if test "${with_tk+set}" = set ; then
      possibles="${possibles} ${with_tk}/lib"
      if test "${with_tcl_version+set}" = set ; then
        possibles="${possibles} ${with_tk}/lib/tcl${with_tcl_version}"
        possibles="${possibles} ${with_tk}/lib/tk${with_tcl_version}"
      fi
    fi
    if test "${with_tcl+set}" = set ; then
      possibles="${possibles} ${with_tcl}/lib"
      if test "${with_tcl_version+set}" = set ; then
        possibles="${possibles} ${with_tcl}/lib/tcl${with_tcl_version}"
        possibles="${possibles} ${with_tcl}/lib/tk${with_tcl_version}"
      fi
    fi
    possibles="${possibles} ${prefix}/lib"
    if test "${with_tcl_version+set}" = set ; then
      possibles="${possibles} ${prefix}/lib/tcl${with_tcl_version}"
      possibles="${possibles} ${prefix}/lib/tk${with_tcl_version}"
    fi
    possibles="${possibles} /usr/lib"
    if test "${with_tcl_version+set}" = set ; then
      possibles="${possibles} /usr/lib/tcl${with_tcl_version}"
      possibles="${possibles} /usr/lib/tk${with_tcl_version}"
    fi
 
    AC_MSG_NOTICE(looking for tkConfig.sh in ${possibles})
    AC_FIND_FILE("tkConfig.sh", ${possibles}, tkconfig)
    if test \! -r "${tkconfig}/tkConfig.sh" ; then
      AC_MSG_ERROR(unable to locate Tk config file tkConfig.sh)
    else
      AC_MSG_NOTICE(found ${tkconfig}/tkConfig.sh)
      . ${tkconfig}/tkConfig.sh
 
      if test -n "${TK_INCLUDE_SPEC}" ; then
        ecos_tk_includes="${TK_INCLUDE_SPEC}"
	AC_MSG_NOTICE(trying TK_INCLUDE_SPEC - looking for tk.h in ${ecos_tk_includes})
      elif test -n "${TK_INC_DIR}" ; then
          ecos_tk_includes="${TK_INC_DIR}"
	  AC_MSG_NOTICE(trying TK_INC_DIR - looking for tk.h in ${ecos_tk_includes})
      else
          ecos_tk_includes="-I${TCL_PREFIX}/include"
	  AC_MSG_WARN(no TK_INCLUDE_SPEC or TK_INC_DIR in tkConfig.sh)
	  AC_MSG_NOTICE(fallback - looking for tk.h in ${ecos_tk_includes})
      fi
      dnl But verify that the resulting incdir is valid.
      ecos_tk_tmpdir=`echo ${ecos_tk_includes} | sed -e "s:-I::g"`
      if test \! -r "${ecos_tk_tmpdir}/tk.h" ; then
        AC_MSG_ERROR(unable to locate Tk header file tk.h)
      else
        dnl On Unix systems -I/usr/include is unnecessary, and can
        dnl cause problems on hosts where gcc is not the platform's
        dnl default compiler because of the use of unfixed headers.
        dnl Hence it is explicitly removed here.
	AC_MSG_NOTICE(using ${ecos_tk_includes})
        if test "${ecos_tk_includes}" = "-I/usr/include" ; then
  	  ecos_tk_includes=""
        fi
      fi
      dnl There may be additional include directories for X, although
      dnl unlikely on a Unix system.
      if test -n "${TK_XINCLUDES}" ; then
        AC_MSG_NOTICE(adding TK_XINCLUDES ${TK_XINCLUDES})
        ecos_tk_includes="${ecos_tk_includes} ${TK_XINCLUDES}"
      fi
 
      ecos_tk_libs=""
      if test -n "${TK_LIB_SPEC}" ; then
        ecos_tk_libs="${TK_LIB_SPEC}"
	AC_MSG_NOTICE(trying TK_LIB_SPEC ${TK_LIB_SPEC})
      else
        AC_MSG_WARN(no TK_LIB_SPEC in tkConfig.sh)
        if test "${with_tcl_version+set}" = set ; then
	  AC_MSG_NOTICE(fallback - looking for libtk${with_tcl_version}.a in ${possibles})
          AC_FIND_FILE("libtk${with_tcl_version}.a", ${possibles}, libtk)
          if test -r "${libtk}/libtk${with_tcl_version}.a" ; then
            ecos_tk_libs="-L${libtk} -ltk${with_tcl_version}"
          fi
        fi
        if test -z "${ecos_tk_libs}" ; then
	  AC_MSG_NOTICE(fallback - looking for libtk.a in ${possibles})
          AC_FIND_FILE("libtk.a", ${possibles}, libtk)
          if test -r "${libtk}/libtk.a" ; then
            ecos_tk_libs="-L${libtk} -ltk"
          fi
        fi
      fi
      if test -z "${ecos_tk_libs}" ; then
        AC_MSG_ERROR(${tkconfig}/tkConfig.sh does not define TK_LIB_SPEC, and unable to find libtk.a)
      else
        AC_MSG_NOTICE(using ${ecos_tk_libs})
      fi
 
      dnl Tk may need additional libraries. Unfortunately some of these
      dnl duplicate the Tcl ones, causing occasional linker upsets. It
      dnl is assumed here that Tk will only be used in conjunction with
      dnl tcl.
      if test -n "${TK_LIBS}" ; then
        if test -n "${TCL_LIBS}" ; then
	  ecos_tk_tmp="${TK_LIBS}"
	  for i in ${TCL_LIBS} ; do
	    ecos_tk_tmp=`echo ${ecos_tk_tmp} | sed -e "s:${i}::g"`
	  done
	  ecos_tk_libs="${ecos_tk_libs} ${ecos_tk_tmp}"
	  AC_MSG_NOTICE(using additional libraries for Tk ${ecos_tk_tmp})
	else 
          ecos_tk_libs="${ecos_tk_libs} ${TK_LIBS}"
	  AC_MSG_NOTICE(using additional libraries for Tk ${TK_LIBS})
	fi
      fi
    fi
  fi
 
  AC_MSG_CHECKING(for Tcl/Tk installation)
  AC_MSG_RESULT(done)
  AC_SUBST(ecos_tk_includes)
  AC_SUBST(ecos_tk_libs)
])
 
dnl ====================================================================
dnl Search for the infrastructure headers. Usually these can be picked
dnl up from host/infra in the build tree. This macro updates
dnl ecos_INCLUDES, ecos_LDADD and ecos_LIBS appropriately. In addition
dnl it defines new variables ecos_infra_incdir and ecos_infra_libdir,
dnl useful for listing explicit dependencies.
dnl
dnl This macro should only be used in configure scripts that run after
dnl the infrastructure has been configured because it relies on the
dnl infra directory already having been created in the build tree.
 
AC_DEFUN([ECOS_PATH_INFRA], [
  AC_MSG_CHECKING([for eCos host-side infrastructure])
 
  dnl Where are we in the build tree? First assume that we are in the host
  dnl tree, thus allowing configury of just the host-side. If that fails
  dnl assume we can be anywhere.
  infra_builddir=""
  possibles=".. ../.. ../../.. ../../../.. ../../../../.."
  AC_FIND_DIR("infra", ${possibles}, infra_builddir)
  if test "${infra_builddir}" = "" ; then
    possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host"
    AC_FIND_DIR("infra", ${possibles}, infra_builddir)
  fi
  if test "${infra_builddir}" != "" ; then
    infra_builddir="${infra_builddir}/infra"
    infra_builddir=`cd ${infra_builddir} && /bin/pwd`
  fi
 
  ecos_infra_incdir=""
  ecos_infra_libdir=""
  ecos_infra_libs=""
 
  AC_ARG_WITH(infra-header,[ --with-infra-header=<path> location of eCos infrastructure headers])
  AC_ARG_WITH(infra-lib,[ --with-infra-lib=<path>    location of eCos infrastructure library])
  AC_ARG_WITH(infra,[ --with-infra=<path>        location of eCos infrastructure installation])
 
  if test "${with_infra_header+set}" = "set"; then
    ecos_infra_incdir="${with_infra_header}"
  elif test "${with_infra+set}" = "set"; then
    ecos_infra_incdir="${with_infra}/include"
  elif test "${infra_builddir}" != "" ; then
    ecos_infra_incdir="${infra_builddir}"
  else
    AC_MSG_ERROR([infrastructure headers not found])
  fi
  if test "${MSVC}" = "yes" ; then
    ecos_msvc_infra_incdir=${ecos_infra_incdir}
    ECOS_MSVC_PATH(ecos_msvc_infra_incdir)
    ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_infra_incdir}\""
  else
    ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_infra_incdir}"
  fi
 
  if test "${with_infra_lib+set}" = "set"; then
    ecos_infra_libdir="${with_infra_lib}"
  elif test "${with_infra+set}" = "set"; then
    ecos_infra_libdir="${with_infra}/lib"
  elif test "${infra_builddir}" != "" ; then
    ecos_infra_libdir="${infra_builddir}"
  else
    AC_MSG_ERROR([infrastructure library not found])
  fi
  if test "${MSVC}" = "yes" ; then
    ecos_msvc_infra_libdir=${ecos_infra_libdir}
    ECOS_MSVC_PATH(ecos_msvc_infra_libdir)
    ecos_LIBS="${ecos_LIBS} cyginfra.lib"
    ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_infra_libdir}\""
  else
    ecos_LIBS="${ecos_LIBS} -lcyginfra"
    ecos_LDADD="${ecos_LDADD} -L${ecos_infra_libdir}"
  fi
 
  AC_SUBST(ecos_infra_incdir)
  AC_SUBST(ecos_infra_libdir)
  AC_MSG_RESULT(-I[${ecos_infra_incdir} -L${ecos_infra_libdir}])
])
 
dnl ====================================================================
dnl And a very similar macro for libcdl, but note that the headers
dnl are in the source tree rather than the build tree.
 
AC_DEFUN([ECOS_PATH_LIBCDL], [
  AC_MSG_CHECKING([for libcdl])
 
  dnl Where are we in the source tree?
  libcdl_srcdir=""
  possibles="${srcdir}/.. ${srcdir}/../.. ${srcdir}/../../.. ${srcdir}/../../../.. ${srcdir}/../../../../.."
  AC_FIND_DIR("libcdl", ${possibles}, libcdl_srcdir)
  if test "${libcdl_srcdir}" = "" ; then
    possibles="${srcdir}/../host ${srcdir}/../../host ${srcdir}/../../../host ${srcdir}/../../../../host ${srcdir}/../../../../../host ${srcdir}/../../../../../../host"
    AC_FIND_DIR("libcdl", ${possibles}, libcdl_srcdir)
  fi
  if test "${libcdl_srcdir}" != "" ; then
    libcdl_srcdir="${libcdl_srcdir}/libcdl"
    libcdl_srcdir=`cd ${libcdl_srcdir} && /bin/pwd`
  fi
 
  dnl And where are we in the build tree?
  libcdl_builddir=""
  possibles=".. ../.. ../../.. ../../../.. ../../../../.."
  AC_FIND_DIR("libcdl", ${possibles}, libcdl_builddir)
  if test "${libcdl_builddir}" = "" ; then
    possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host"
    AC_FIND_DIR("libcdl", ${possibles}, libcdl_builddir)
  fi
  if test "${libcdl_builddir}" != "" ; then
    libcdl_builddir="${libcdl_builddir}/libcdl"
    libcdl_builddir=`cd ${libcdl_builddir} && /bin/pwd`
  fi
 
  ecos_libcdl_incdir=""
  ecos_libcdl_libdir=""
  ecos_libcdl_libs=""
 
  AC_ARG_WITH(libcdl-header,[ --with-libcdl-header=<path> location of eCos libcdl headers])
  AC_ARG_WITH(libcdl-lib,[ --with-libcdl-lib=<path>    location of eCos libcdl library])
  AC_ARG_WITH(libcdl,[ --with-libcdl=<path>        location of eCos libcdl installation])
 
  if test "${with_libcdl_header+set}" = "set"; then
    ecos_libcdl_incdir="${with_libcdl_header}"
  elif test "${with_libcdl+set}" = "set"; then
    ecos_libcdl_incdir="${with_libcdl}/include"
  elif test "${libcdl_srcdir}" != "" ; then
    ecos_libcdl_incdir="${libcdl_srcdir}"
  fi
  if test \! -r "${ecos_libcdl_incdir}/cdl.hxx" ; then
    AC_MSG_ERROR([libcdl headers not found])
  fi
  if test "${MSVC}" = "yes" ; then
    ecos_msvc_libcdl_incdir="${ecos_libcdl_incdir}"
    ECOS_MSVC_PATH(ecos_msvc_libcdl_incdir)
    ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_libcdl_incdir}\""
  else
    ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_libcdl_incdir}"
  fi
 
  if test "${with_libcdl_lib+set}" = "set"; then
    ecos_libcdl_libdir="${with_libcdl_lib}"
  elif test "${with_libcdl+set}" = "set"; then
    ecos_libcdl_libdir="${with_libcdl}/lib"
  elif test "${libcdl_builddir}" != "" ; then
    ecos_libcdl_libdir="${libcdl_builddir}"
  else
    AC_MSG_ERROR([libcdl library not found])
  fi
  if test "${MSVC}" = "yes" ; then
    ecos_msvc_libcdl_libdir=${ecos_libcdl_libdir}
    ECOS_MSVC_PATH(ecos_msvc_libcdl_libdir)
    ecos_LIBS="${ecos_LIBS} cdl.lib"
    ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_libcdl_libdir}\""
  else
    ecos_LIBS="${ecos_LIBS} -lcdl"
    ecos_LDADD="${ecos_LDADD} -L${ecos_libcdl_libdir}"
  fi
 
  AC_SUBST(ecos_libcdl_incdir)
  AC_SUBST(ecos_libcdl_libdir)
  AC_MSG_RESULT([-I${ecos_libcdl_incdir} -L${ecos_libcdl_libdir}])
])
 
dnl ====================================================================
dnl Look for a 64 bit data type. It is necessary to check both C and C++
dnl compilers.
dnl
dnl A better implementation would check whether or not AC_PROG_CC and
dnl AC_PROG_CXX have been invoked and only test the appropriate
dnl compiler.
dnl
dnl When cross-compiling, default to long long on the assumption that
dnl gcc/g++ must be used and long long is likely to be the 64 bit data
dnl type. This is not guaranteed, but sufficiently likely to meet
dnl the requirements for the time being. The CHECK_SIZEOF() macro
dnl might be another way to get the desired information.
 
AC_DEFUN([ECOS_TYPE_64bit], [
  AC_REQUIRE([AC_PROG_CC])
  AC_REQUIRE([AC_PROG_CXX])
 
  AC_CACHE_CHECK("for a 64 bit data type",ecos_cv_type_64bit,[
    for type in "long" "long long" "__int64"; do
      AC_LANG_SAVE
      AC_LANG_C
      AC_TRY_RUN([
        main() {
          return 8 != sizeof($type);
        }
      ],ctype_64bit=$type,ctype_64bit="unknown",ctype_64bit="long long")
      AC_LANG_CPLUSPLUS
      AC_TRY_RUN([
        int main(int argc, char ** argv) {
            return 8 != sizeof($type);
        }
      ],cxxtype_64bit=$type,cxxtype_64bit="unknown",cxxtype_64bit="long long")
      AC_LANG_RESTORE
      if test "${ctype_64bit}" = "${type}" -a "${cxxtype_64bit}" = "${type}"; then
        ecos_cv_type_64bit="${type}"
        break
      fi
    done
  ])
  if test "${ecos_cv_type_64bit}" = ""; then
    AC_MSG_ERROR(Unable to figure out how to do 64 bit arithmetic)
  else
    if test "${ecos_cv_type_64bit}" != "long long"; then
      AC_DEFINE_UNQUOTED(cyg_halint64,${ecos_cv_type_64bit},[size of 64-bit datatype])
      AC_DEFINE_UNQUOTED(cyg_halcount64,${ecos_cv_type_64bit},[size of >= 64-bit datatype])
    fi
  fi
])
 
dnl ====================================================================
dnl Check that both the C and C++ compilers support __PRETTY_FUNCTION__
 
AC_DEFUN([ECOS_C_PRETTY_FUNCTION],[
  AC_REQUIRE([AC_PROG_CC])
  AC_REQUIRE([AC_PROG_CXX])
 
  AC_CACHE_CHECK("for __PRETTY_FUNCTION__ support",ecos_cv_c_pretty_function,[
    AC_LANG_SAVE
    AC_LANG_C
    AC_TRY_LINK(
      [#include <stdio.h>],
      [puts(__PRETTY_FUNCTION__);],
      c_ok="yes",
      c_ok="no"
    )
    AC_LANG_CPLUSPLUS
    AC_TRY_LINK(
      [#include <cstdio>],
      [puts(__PRETTY_FUNCTION__);],
      cxx_ok="yes",
      cxx_ok="no"
    )
    AC_LANG_RESTORE
    if test "${c_ok}" = "yes" -a "${cxx_ok}" = "yes"; then
      ecos_cv_c_pretty_function="yes"
    fi
  ])
  if test "${ecos_cv_c_pretty_function}" = "yes"; then
    AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO,[1],[compiler supports __PRETTY_FUNCTION__])
  fi
])
 
dnl ====================================================================
dnl During installation eCos package-specific host-side code should be
dnl versioned in the same way as the packages themselves, allowing
dnl different versions to coexist in one installation. This is analogous
dnl to having multiple versions of a shared library installed so that
dnl applications can load whichever one they were linked with.
dnl
dnl To support all this the host-side code needs access to a number
dnl of directory names:
dnl     ECOS_REPOSITORY    e.g. ~/ecc/ecc
dnl     PACKAGE_DIR        e.g. hal/synth/arch
dnl     PACKAGE_VERSION    e.g. current
dnl     PACKAGE_INSTALL    e.g. hal/synth/arch/current
dnl
dnl These, together with the standard variable libexecdir, allow
dnl the host-side code to navigate around both source and install
dnl trees.
 
AC_DEFUN([ECOS_PACKAGE_DIRS],[
 
  dnl srcdir will be something like <path>/packages/<package_path>/<version>/host
  package_dir=`cd ${srcdir} && /bin/pwd`
  PACKAGE_VERSION=`dirname ${package_dir}`
  PACKAGE_VERSION=`basename ${PACKAGE_VERSION}`
 
  dnl Now look for an "acsupport" directory as a good way of identifying
  dnl the root of the repository. Assume that this does not clash with
  dnl any real packages in the repository. Also assume that no silly games
  dnl are being played with symlinks.
  package_dir=`dirname ${package_dir}`
  package_dir=`dirname ${package_dir}`
 
  possibles="${package_dir}/.. ${package_dir}/../.. ${package_dir}/../../.. ${package_dir}/../../../.."
  possibles="${possibles} ${package_dir}/../../../../.. ${package_dir}/../../../../../.." 
  AC_FIND_DIR("acsupport", ${possibles}, repository_root)
  if test "${repository_root}" = "" ; then
    AC_MSG_ERROR([Failed to identify this package's position within the eCos repository])
  fi
  dnl repository_root will still contain the ..'s, instead of an absolute path
  ECOS_REPOSITORY=`cd "${repository_root}/packages/pkgconf/.." && /bin/pwd`
 
  dnl Now we have two absolute paths, so just remove one from the other
  PACKAGE_DIR=`echo ${package_dir} | sed -e "s:${ECOS_REPOSITORY}/::"`
 
  dnl To avoid creating too many subdirectories on the host-side, turn
  dnl e.g. hal/synth/arch into hal_synth_arch. Theoretically this could
  dnl go wrong because multiple packages could map onto the same string,
  dnl but in practice there should be a net reduction in complexity.
  dnl bartv: / to _ conversion disabled for now, 5 March 2002
  PACKAGE_INSTALL="${PACKAGE_DIR}/${PACKAGE_VERSION}"
  dnl PACKAGE_INSTALL=`echo ${PACKAGE_INSTALL} | sed -e "s:/:_:g"`
 
  AC_SUBST(ECOS_REPOSITORY)
  AC_SUBST(PACKAGE_DIR)
  AC_SUBST(PACKAGE_VERSION)
  AC_SUBST(PACKAGE_INSTALL)
])