OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [host/] [libcdl/] [Makefile.in] - Rev 786

Compare with Previous | Blame | View Log

# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# ####ECOSHOSTGPLCOPYRIGHTBEGIN####                                         
# -------------------------------------------                               
# This file is part of the eCos host tools.                                 
# Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. 
#
# This program is free software; you can redistribute it and/or modify      
# it under the terms of the GNU General Public License as published by      
# the Free Software Foundation; either version 2 or (at your option) any    
# later version.                                                            
#
# This program is distributed in the hope that it will be useful, but       
# WITHOUT ANY WARRANTY; without even the implied warranty of                
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU         
# General Public License for more details.                                  
#
# You should have received a copy of the GNU General Public License         
# along with this program; if not, write to the                             
# Free Software Foundation, Inc., 51 Franklin Street,                       
# Fifth Floor, Boston, MA  02110-1301, USA.                                 
# -------------------------------------------                               
# ####ECOSHOSTGPLCOPYRIGHTEND####                                           
#######DESCRIPTIONBEGIN####
######DESCRIPTIONEND####


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = $(am__configure_deps) $(include_HEADERS) \
        $(srcdir)/../../acsupport/config.guess \
        $(srcdir)/../../acsupport/config.sub \
        $(srcdir)/../../acsupport/depcomp \
        $(srcdir)/../../acsupport/install-sh \
        $(srcdir)/../../acsupport/missing \
        $(srcdir)/../../acsupport/mkinstalldirs $(srcdir)/Makefile.am \
        $(srcdir)/Makefile.in $(srcdir)/config.h.in \
        $(top_srcdir)/configure ../../acsupport/ChangeLog \
        ../../acsupport/config.guess ../../acsupport/config.sub \
        ../../acsupport/depcomp ../../acsupport/install-sh \
        ../../acsupport/ltmain.sh ../../acsupport/missing \
        ../../acsupport/mkinstalldirs ChangeLog TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
        $(top_srcdir)/../../acsupport/acinclude.m4 \
        $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../../acsupport/mkinstalldirs
CONFIG_HEADER = cdlconfig.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
AR = ar
ARFLAGS = cru
libcdl_a_AR = $(AR) $(ARFLAGS)
libcdl_a_LIBADD =
am__objects_1 = interp.$(OBJEXT) expr.$(OBJEXT) func.$(OBJEXT) \
        refer.$(OBJEXT) cdlmisc.$(OBJEXT) conflict.$(OBJEXT) \
        property.$(OBJEXT) parse.$(OBJEXT) base.$(OBJEXT) \
        value.$(OBJEXT) build.$(OBJEXT) dialog.$(OBJEXT) \
        wizard.$(OBJEXT) interface.$(OBJEXT) transact.$(OBJEXT) \
        infer.$(OBJEXT) database.$(OBJEXT) config.$(OBJEXT) \
        package.$(OBJEXT) component.$(OBJEXT) option.$(OBJEXT)
am_libcdl_a_OBJECTS = $(am__objects_1)
libcdl_a_OBJECTS = $(am_libcdl_a_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../../acsupport/depcomp
am__depfiles_maybe = depfiles
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
        $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
        -o $@
SOURCES = $(libcdl_a_SOURCES)
DIST_SOURCES = $(libcdl_a_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        html-recursive info-recursive install-data-recursive \
        install-dvi-recursive install-exec-recursive \
        install-html-recursive install-info-recursive \
        install-pdf-recursive install-ps-recursive install-recursive \
        installcheck-recursive installdirs-recursive pdf-recursive \
        ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(includedir)"
includeHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(include_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EXEEXT = @EXEEXT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @ecos_LIBS@ @ecos_LDADD@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSVC_SRCDIR = @MSVC_SRCDIR@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
ecos_CFLAGS = @ecos_CFLAGS@
ecos_CXXFLAGS = @ecos_CXXFLAGS@
ecos_INCLUDES = @ecos_INCLUDES@
ecos_LDADD = @ecos_LDADD@
ecos_LIBS = @ecos_LIBS@
ecos_infra_incdir = @ecos_infra_incdir@
ecos_infra_libdir = @ecos_infra_libdir@
ecos_tk_includes = @ecos_tk_includes@
ecos_tk_libs = @ecos_tk_libs@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = 1.10 foreign
SUBDIRS = testsuite
INCLUDES = @ecos_INCLUDES@
AM_CFLAGS = @ecos_CFLAGS@
AM_CXXFLAGS = @ecos_CXXFLAGS@
include_HEADERS = cdlcore.hxx cdl.hxx
sources := interp.cxx       \
           expr.cxx         \
           func.cxx         \
           refer.cxx        \
           cdlmisc.cxx      \
           conflict.cxx     \
           property.cxx     \
           parse.cxx        \
           base.cxx         \
           value.cxx        \
           build.cxx        \
           dialog.cxx       \
           wizard.cxx       \
           interface.cxx    \
           transact.cxx     \
           infer.cxx        \
           database.cxx     \
           config.cxx       \
           package.cxx      \
           component.cxx    \
           option.cxx

noinst_LIBRARIES = libcdl.a
libcdl_a_SOURCES = $(sources)
infra_headers := $(ecos_infra_incdir)/cyg/infra/cyg_ass.h  \
                 $(ecos_infra_incdir)/cyg/infra/cyg_trac.h \
                 $(ecos_infra_incdir)/pkgconf/infra.h      \
                 $(ecos_infra_incdir)/pkgconf/hostinfra.h  \
                 $(ecos_infra_incdir)/cyg/infra/cyg_type.h

cdlcore_headers := cdlconfig.h cdlcore.hxx
cdl_headers := $(cdlcore_headers) cdl.hxx
all: cdlconfig.h
        $(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .cxx .o .obj
am--refresh:
        @:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
              cd $(srcdir) && $(AUTOMAKE) --foreign  \
                && exit 0; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
        cd $(top_srcdir) && \
          $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            echo ' $(SHELL) ./config.status'; \
            $(SHELL) ./config.status;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        $(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

cdlconfig.h: stamp-h1
        @if test ! -f $@; then \
          rm -f stamp-h1; \
          $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
        else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
        @rm -f stamp-h1
        cd $(top_builddir) && $(SHELL) ./config.status cdlconfig.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
        cd $(top_srcdir) && $(AUTOHEADER)
        rm -f stamp-h1
        touch $@

distclean-hdr:
        -rm -f cdlconfig.h stamp-h1

clean-noinstLIBRARIES:
        -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libcdl.a: $(libcdl_a_OBJECTS) $(libcdl_a_DEPENDENCIES) 
        -rm -f libcdl.a
        $(libcdl_a_AR) libcdl.a $(libcdl_a_OBJECTS) $(libcdl_a_LIBADD)
        $(RANLIB) libcdl.a

mostlyclean-compile:
        -rm -f *.$(OBJEXT)

distclean-compile:
        -rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/base.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/build.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdlmisc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/component.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/config.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/conflict.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/database.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dialog.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/func.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/infer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/interface.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/interp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/option.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/package.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/property.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/refer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transact.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/value.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wizard.Po@am__quote@

.cxx.o:
@am__fastdepCXX_TRUE@   $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@   mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ $<

.cxx.obj:
@am__fastdepCXX_TRUE@   $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCXX_TRUE@   mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
install-includeHEADERS: $(include_HEADERS)
        @$(NORMAL_INSTALL)
        test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
        @list='$(include_HEADERS)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
          echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
          $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
        done

uninstall-includeHEADERS:
        @$(NORMAL_UNINSTALL)
        @list='$(include_HEADERS)'; for p in $$list; do \
          f=$(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
          rm -f "$(DESTDIR)$(includedir)/$$f"; \
        done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
          empty_fix=.; \
        else \
          include_option=--include; \
          empty_fix=; \
        fi; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
            $$tags $$unique; \
        fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        test -z "$(CTAGS_ARGS)$$tags$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$tags $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && cd $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
        $(am__remove_distdir)
        test -d $(distdir) || mkdir $(distdir)
        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        list='$(DISTFILES)'; \
          dist_files=`for file in $$list; do echo $$file; done | \
          sed -e "s|^$$srcdirstrip/||;t" \
              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
        case $$dist_files in \
          */*) $(MKDIR_P) `echo "$$dist_files" | \
                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                           sort -u` ;; \
        esac; \
        for file in $$dist_files; do \
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          if test -d $$d/$$file; then \
            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
            fi; \
            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
          else \
            test -f $(distdir)/$$file \
            || cp -p $$d/$$file $(distdir)/$$file \
            || exit 1; \
          fi; \
        done
        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
            || exit 1; \
            distdir=`$(am__cd) $(distdir) && pwd`; \
            top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
            (cd $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$top_distdir" \
                distdir="$$distdir/$$subdir" \
                am__remove_distdir=: \
                am__skip_length_check=: \
                distdir) \
              || exit 1; \
          fi; \
        done
        -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
        || chmod -R a+r $(distdir)
dist-gzip: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)

dist-bzip2: distdir
        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
        $(am__remove_distdir)

dist-lzma: distdir
        tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
        $(am__remove_distdir)

dist-tarZ: distdir
        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
        $(am__remove_distdir)

dist-shar: distdir
        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
        $(am__remove_distdir)

dist-zip: distdir
        -rm -f $(distdir).zip
        zip -rq $(distdir).zip $(distdir)
        $(am__remove_distdir)

dist dist-all: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
        case '$(DIST_ARCHIVES)' in \
        *.tar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
        *.tar.bz2*) \
          bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
        *.tar.lzma*) \
          unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
        *.tar.Z*) \
          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
        *.shar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
        *.zip*) \
          unzip $(distdir).zip ;;\
        esac
        chmod -R a-w $(distdir); chmod a+w $(distdir)
        mkdir $(distdir)/_build
        mkdir $(distdir)/_inst
        chmod a-w $(distdir)
        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
          && cd $(distdir)/_build \
          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
            $(DISTCHECK_CONFIGURE_FLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) dvi \
          && $(MAKE) $(AM_MAKEFLAGS) check \
          && $(MAKE) $(AM_MAKEFLAGS) install \
          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
                distuninstallcheck \
          && chmod -R a-w "$$dc_install_base" \
          && ({ \
               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
              } || { rm -rf "$$dc_destdir"; exit 1; }) \
          && rm -rf "$$dc_destdir" \
          && $(MAKE) $(AM_MAKEFLAGS) dist \
          && rm -rf $(DIST_ARCHIVES) \
          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
        $(am__remove_distdir)
        @(echo "$(distdir) archives ready for distribution: "; \
          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
        @cd $(distuninstallcheck_dir) \
        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
           || { echo "ERROR: files left after uninstall:" ; \
                if test -n "$(DESTDIR)"; then \
                  echo "  (check DESTDIR support)"; \
                fi ; \
                $(distuninstallcheck_listfiles) ; \
                exit 1; } >&2
distcleancheck: distclean
        @if test '$(srcdir)' = . ; then \
          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
          exit 1 ; \
        fi
        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
          || { echo "ERROR: files left in build directory after distclean:" ; \
               $(distcleancheck_listfiles) ; \
               exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(LIBRARIES) $(HEADERS) cdlconfig.h all-local
installdirs: installdirs-recursive
installdirs-am:
        for dir in "$(DESTDIR)$(includedir)"; do \
          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-local clean-noinstLIBRARIES \
        mostlyclean-am

distclean: distclean-recursive
        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
        -rm -rf ./$(DEPDIR)
        -rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
        distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-includeHEADERS

install-dvi: install-dvi-recursive

install-exec-am: install-exec-local

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
        -rm -rf $(top_srcdir)/autom4te.cache
        -rm -rf ./$(DEPDIR)
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-includeHEADERS

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
        install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
        all all-am all-local am--refresh check check-am clean \
        clean-generic clean-local clean-noinstLIBRARIES ctags \
        ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzma \
        dist-shar dist-tarZ dist-zip distcheck distclean \
        distclean-compile distclean-generic distclean-hdr \
        distclean-tags distcleancheck distdir distuninstallcheck dvi \
        dvi-am html html-am info info-am install install-am \
        install-data install-data-am install-dvi install-dvi-am \
        install-exec install-exec-am install-exec-local install-html \
        install-html-am install-includeHEADERS install-info \
        install-info-am install-man install-pdf install-pdf-am \
        install-ps install-ps-am install-strip installcheck \
        installcheck-am installdirs installdirs-am maintainer-clean \
        maintainer-clean-generic mostlyclean mostlyclean-compile \
        mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
        uninstall uninstall-am uninstall-includeHEADERS


@MSVC_TRUE@all-local: cdl.lib

@MSVC_TRUE@cdl.lib: libcdl.a
@MSVC_TRUE@     $(INSTALL) $< $@

@MSVC_TRUE@clean-local:
@MSVC_TRUE@     $(RM) cdl.lib

@MSVC_TRUE@install-exec-local: all-local
@MSVC_TRUE@     $(mkinstalldirs) $(DESTDIR)$(libdir)
@MSVC_TRUE@     $(INSTALL) cdl.lib $(DESTDIR)$(libdir)/cdl.lib

@MSVC_FALSE@all-local:
@MSVC_FALSE@clean-local:
@MSVC_FALSE@install-exec-local: libcdl.a
@MSVC_FALSE@    $(mkinstalldirs) $(DESTDIR)$(libdir)
@MSVC_FALSE@    $(INSTALL) libcdl.a $(DESTDIR)$(libdir)/libcdl.a

interp.$(OBJEXT)    : Makefile $(cdlcore_headers) $(infra_headers)

expr.$(OBJEXT)      : Makefile $(cdlcore_headers) $(infra_headers)

infer.$(OBJEXT)     : Makefile $(cdlcore_headers) $(infra_headers)

func.$(OBJEXT)      : Makefile $(cdlcore_headers) $(infra_headers)

refer.$(OBJEXT)     : Makefile $(cdlcore_headers) $(infra_headers)

cdlmisc.$(OBJEXT)   : Makefile $(cdlcore_headers) $(infra_headers)

conflict.$(OBJEXT)  : Makefile $(cdlcore_headers) $(infra_headers)

property.$(OBJEXT)  : Makefile $(cdlcore_headers) $(infra_headers)

parse.$(OBJEXT)     : Makefile $(cdlcore_headers) $(infra_headers)

base.$(OBJEXT)      : Makefile $(cdlcore_headers) $(infra_headers)

value.$(OBJEXT)     : Makefile $(cdlcore_headers) $(infra_headers)

build.$(OBJEXT)     : Makefile $(cdlcore_headers) $(infra_headers)

dialog.$(OBJEXT)    : Makefile $(cdlcore_headers) $(infra_headers)

wizard.$(OBJEXT)    : Makefile $(cdlcore_headers) $(infra_headers)

interface.$(OBJEXT) : Makefile $(cdlcore_headers) $(infra_headers)

transact.$(OBJEXT)  : Makefile $(cdlcore_headers) $(infra_headers)

database.$(OBJEXT)  : Makefile $(cdl_headers) $(infra_headers)

config.$(OBJEXT)    : Makefile $(cdl_headers) $(infra_headers)

package.$(OBJEXT)   : Makefile $(cdl_headers) $(infra_headers)

component.$(OBJEXT) : Makefile $(cdl_headers) $(infra_headers)

option.$(OBJEXT)    : Makefile $(cdl_headers) $(infra_headers)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.