Subversion Repositories openrisc

//==========================================================================
//
//        sigsetjmp.c
//
//        POSIX sigsetjmp test
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):     nickg
// Contributors:  nickg
// Date:          2000-04-10
// Description:   Tests POSIX sigsetjmp functionality.
//
//####DESCRIPTIONEND####
//==========================================================================
 
#include <cyg/infra/testcase.h>
#include <pkgconf/posix.h>
 
#if !defined(CYGPKG_POSIX_SIGNALS)
#define NA_MSG "POSIX signals not enabled"
#elif !defined(CYGPKG_POSIX_PTHREAD)
#define NA_MSG "POSIX threads not enabled"
#elif !defined(CYGPKG_POSIX_SEMAPHORES)
#define NA_MSG "POSIX semaphores not enabled"
#endif
 
#ifdef NA_MSG
void
cyg_start(void)
{
    CYG_TEST_INIT();
    CYG_TEST_NA(NA_MSG);
}
#else
 
#include <sys/types.h>
#include <pthread.h>
#include <signal.h>
#include <semaphore.h>
#include <time.h>
#include <setjmp.h>
 
#include <cyg/infra/testcase.h>
 
//--------------------------------------------------------------------------
// Thread stack.
 
char thread1_stack[PTHREAD_STACK_MIN*2];
char thread2_stack[PTHREAD_STACK_MIN*2];
 
//--------------------------------------------------------------------------
// Local variables
 
// Sync semaphore
sem_t sem;
 
// Thread IDs
pthread_t thread1;
pthread_t thread2;
 
timer_t timer1;
timer_t timer2;
 
volatile int sigusr1_called = 0;
volatile int sigusr2_called = 0;
 
sigjmp_buf jmpbuf1;
sigjmp_buf jmpbuf2;
 
//--------------------------------------------------------------------------
// Signal handler functions
 
static void sigusr1( int signo, siginfo_t *info, void *context )
{
    CYG_TEST_INFO( "sigusr1() handler called" );
    CYG_TEST_CHECK( signo == SIGUSR1, "Signal not SIGUSR1");
    CYG_TEST_CHECK( signo == info->si_signo, "Bad signal number in siginfo" );
    CYG_TEST_CHECK( info->si_code == SI_TIMER, "Siginfo code not SI_TIMER" );
    CYG_TEST_CHECK( info->si_value.sival_int == 0xABCDEF01, "Siginfo value wrong");
    CYG_TEST_CHECK( pthread_equal(pthread_self(), thread1), "Not called in thread1");
 
    sigusr1_called++;
 
    CYG_TEST_INFO( "sigusr1() handler calling siglongjmp()" );
 
    siglongjmp( jmpbuf1, sigusr1_called );
}
 
static void sigusr2( int signo, siginfo_t *info, void *context )
{
    CYG_TEST_INFO( "sigusr2() handler called" );
    CYG_TEST_CHECK( signo == SIGUSR2, "Signal not SIGUSR2");
    CYG_TEST_CHECK( signo == info->si_signo, "Bad signal number in siginfo" );
    CYG_TEST_CHECK( info->si_code == SI_TIMER, "Siginfo code not SI_TIMER" );
    CYG_TEST_CHECK( info->si_value.sival_int == 0xABCDEF02, "Siginfo value wrong");
    CYG_TEST_CHECK( pthread_equal(pthread_self(), thread2), "Not called in thread2");
 
    sigusr2_called++;
 
    CYG_TEST_INFO( "sigusr2() handler calling siglongjmp()" );
    siglongjmp( jmpbuf2, sigusr2_called );    
}
 
//--------------------------------------------------------------------------
 
void *pthread_entry1( void *arg)
{
    sigset_t mask;
 
 
    CYG_TEST_INFO( "Thread 1 running" );
 
    // Make a full set
    sigfillset( &mask );
 
    // remove USR1 signal
    sigdelset( &mask, SIGUSR1 );
 
    // Set signal mask
    pthread_sigmask( SIG_SETMASK, &mask, NULL );
 
    // Get main thread going again
    sem_post( &sem );
 
    do
    {
        sigset_t curmask;
 
        CYG_TEST_INFO( "Thread1: calling sigsetjmp()");                
        if( sigsetjmp( jmpbuf1, 1 ) != 0 )
            CYG_TEST_INFO( "Thread1: sigsetjmp() returned non-zero");
 
        pthread_sigmask( SIG_SETMASK, NULL, &curmask );
        CYG_TEST_CHECK( curmask == mask, "Thread1: Signal masks not equal" );
 
        if ( sigusr1_called >= 1 )
            break;
 
        CYG_TEST_INFO( "Thread1: calling pause()");        
        pause();
 
        CYG_TEST_INFO( "Thread1: pause() returned");        
    } while(1);
 
    CYG_TEST_INFO( "Thread1: calling pthread_exit()");    
    pthread_exit( arg );
}
 
//--------------------------------------------------------------------------
 
void *pthread_entry2( void *arg)
{
    sigset_t mask;
 
    CYG_TEST_INFO( "Thread 2 running" );
 
    // Make a full set
    sigfillset( &mask );
 
    // remove USR2 signal
    sigdelset( &mask, SIGUSR2 );
 
    // Set signal mask
    pthread_sigmask( SIG_SETMASK, &mask, NULL );
 
    // Get main thread going again
    sem_post( &sem );
 
    do 
    {
        sigset_t curmask;
 
        CYG_TEST_INFO( "Thread2: calling sigsetjmp()");
        if( sigsetjmp( jmpbuf2, 1 ) != 0 )
            CYG_TEST_INFO( "Thread2: sigsetjmp() returned non-zero");
 
        pthread_sigmask( SIG_SETMASK, NULL, &curmask );
        CYG_TEST_CHECK( curmask == mask, "Thread2: Signal masks not equal" );
 
        if ( sigusr2_called >= 6 )
            break;
 
        CYG_TEST_INFO( "Thread2: calling pause()");        
        pause();
 
        CYG_TEST_INFO( "Thread2: pause() returned");
    } while(1);
 
    CYG_TEST_INFO( "Thread2: calling pthread_exit()");    
    pthread_exit( arg );
}
 
//--------------------------------------------------------------------------
 
int main(int argc, char **argv)
{
    int ret;
    sigset_t mask;
    pthread_attr_t attr;
    void *retval;
 
    CYG_TEST_INIT();
 
    // Make a full signal set
    sigfillset( &mask );
 
 
    // Install signal handlers
    {
        struct sigaction sa;
 
        sa.sa_sigaction = sigusr1;
        sa.sa_mask = mask;
        sa.sa_flags = SA_SIGINFO;
 
        ret = sigaction( SIGUSR1, &sa, NULL );
 
        CYG_TEST_CHECK( ret == 0 , "sigaction returned error");
    }
    {
        struct sigaction sa;
 
        sa.sa_sigaction = sigusr2;
        sa.sa_mask = mask;
        sa.sa_flags = SA_SIGINFO;
 
        ret = sigaction( SIGUSR2, &sa, NULL );
 
        CYG_TEST_CHECK( ret == 0 , "sigaction returned error");
    }
 
 
    // Create the timers
 
    {
        struct sigevent sev;
        struct itimerspec value;
 
        sev.sigev_notify                = SIGEV_SIGNAL;
        sev.sigev_signo                 = SIGUSR1;
        sev.sigev_value.sival_int       = 0xABCDEF01;
 
        value.it_value.tv_sec           = 1;
        value.it_value.tv_nsec          = 0;
        value.it_interval.tv_sec        = 0;
        value.it_interval.tv_nsec       = 0;
 
        ret = timer_create( CLOCK_REALTIME, &sev, &timer1 );
 
        CYG_TEST_CHECK( ret == 0 , "timer_create returned error");
 
        ret = timer_settime( timer1, 0, &value, NULL );
 
        CYG_TEST_CHECK( ret == 0 , "timer_settime returned error");
    }
 
    {
        struct sigevent sev;
        struct itimerspec value;
 
        sev.sigev_notify                = SIGEV_SIGNAL;
        sev.sigev_signo                 = SIGUSR2;
        sev.sigev_value.sival_int       = 0xABCDEF02;
 
        value.it_value.tv_sec           = 0;
        value.it_value.tv_nsec          = 500000000;
        value.it_interval.tv_sec        = 0;
        value.it_interval.tv_nsec       = 250000000;
 
        ret = timer_create( CLOCK_REALTIME, &sev, &timer2 );
 
        CYG_TEST_CHECK( ret == 0 , "timer_create returned error");
 
        ret = timer_settime( timer2, 0, &value, NULL );
 
        CYG_TEST_CHECK( ret == 0 , "timer_settime returned error");
    }
 
 
    // Mask all signals
    pthread_sigmask( SIG_SETMASK, &mask, NULL );
 
    sem_init( &sem, 0, 0 );
 
    // Create test threads
 
    {
        pthread_attr_init( &attr );
 
        pthread_attr_setstackaddr( &attr, (void *)&thread1_stack[sizeof(thread1_stack)] );
        pthread_attr_setstacksize( &attr, sizeof(thread1_stack) );
 
        pthread_create( &thread1,
                        &attr,
                        pthread_entry1,
                        (void *)0x12345671);
    }
 
    {
        pthread_attr_init( &attr );
 
        pthread_attr_setstackaddr( &attr, (void *)&thread2_stack[sizeof(thread2_stack)] );
        pthread_attr_setstacksize( &attr, sizeof(thread2_stack) );
 
        pthread_create( &thread2,
                        &attr,
                        pthread_entry2,
                        (void *)0x12345672);
    }
 
    // Wait for other thread to get started
    CYG_TEST_INFO( "Main: calling sem_wait()");
    sem_wait( &sem );
    CYG_TEST_INFO( "Main: calling sem_wait() again");    
    sem_wait( &sem );
 
    // Now join with thread1
    CYG_TEST_INFO( "Main: calling pthread_join(thread1)");
    pthread_join( thread1, &retval );
 
    CYG_TEST_CHECK( retval == (void *)0x12345671, "Thread 1 retval wrong");
 
    // And thread 2
    CYG_TEST_INFO( "Main: calling pthread_join(thread2)");
    pthread_join( thread2, &retval );
 
    // now delete the timers
    CYG_TEST_INFO( "Main: calling timer_delete(timer1)");    
    ret = timer_delete( timer1 );
 
    CYG_TEST_CHECK( ret == 0 , "timer_delete(timer1) returned error");
 
    CYG_TEST_INFO( "Main: calling timer_delete(timer2)");    
    ret = timer_delete( timer2 );
 
    CYG_TEST_CHECK( ret == 0 , "timer_delete(timer2) returned error");
 
 
    CYG_TEST_CHECK( retval == (void *)0x12345672, "Thread 2 retval wrong");
 
    CYG_TEST_CHECK( sigusr1_called == 1, "SIGUSR1 signal handler not called once" );
    CYG_TEST_CHECK( sigusr2_called == 6, "SIGUSR2 signal handler not called six times" );
 
    CYG_TEST_PASS_FINISH( "sigsetjmp" );
}
 
#endif
 
//--------------------------------------------------------------------------
// end of sigsetjmp.c